*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
* Replace all occurrences of the word "part" with "unit" when referring to
multiple unit components for improved consistency.
* Replace "shared by" with "common to" when referring to objects (lines, arcs,
pins, etc.) that are common to all units.
* Improve wording in library component properties dialog.
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
Eeschema (also Libedit and Libview) starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* Change edit pin per part flag to only have effect when editing
component with multiple parts or alternate body styles.
* Move global edit pin pert part variable into library editor frame
object.
* Note that this only fixes the bug when the component does not have
multiple parts or alternate body styles.
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
jean-pierre charras
Dick Hollenbeck
Wayne Stambaugh
Lorenzo Marcantonio
Andrey Fedorushkov
Jacobo Aragunde Perez
Hauptmech