8f0aa68ab8
Fold 3D Search Paths dialog into Configure Paths.
...
Use in-place editing for both.
Fixes: lp:1743823
* https://bugs.launchpad.net/kicad/+bug/1743823
(cherry picked from commit 33622cd)
2018-07-17 15:11:01 +01:00
a08c0ac08c
kicad2step: Added minimum distance parameter
2018-06-19 10:37:07 +02:00
04a462e48f
kicad2step: Converted #defines to constexprs
2018-06-19 10:37:07 +02:00
1541cbdf04
kicad2step: Add short segments to fix outline contiguity for arcs
...
STEP exporter keeps outline contiguous by storing the last point
coordinates and using them as the starting point for the next segment. It
might create a problem for arcs, as one of the arc end points may become
translated (changed to the last outline point), while the remaining
points (center and the other endpoint) are kept original. For large
deltas it renders an arc invalid, as it cannot pass through a modified
endpoint anymore.
To fix this, short segments are added to link the last outline point
with an arc endpoint, but only if the distance between the two is below
a certain threshold. This way the outline is kept contiguous and the arc
end point is unmodified, warranting its correctness.
Fixes: lp:1774351
* https://bugs.launchpad.net/kicad/+bug/1774351
2018-06-19 10:29:18 +02:00
ba3f2b30ee
kicad2step: More diagnostic messages to determine export issues
2018-06-18 17:51:22 +02:00
6d77e594b5
Python binding: fix pcbnew.Refresh() to make a better re-initialization.
...
Minor fixes in comments.
Fixes: lp:1775003
https://bugs.launchpad.net/kicad/+bug/1775003
2018-06-07 10:04:29 +02:00
6a2dc8d4eb
Roll back last 2 commits meant for the other resolver only.
...
Fixes: lp:1772255
* https://bugs.launchpad.net/kicad/+bug/1772255
2018-05-21 16:25:44 +01:00
10ec39a107
Move 3D file error messages to tracePathsAndFiles key.
...
Fixes: lp:1772255
* https://bugs.launchpad.net/kicad/+bug/1772255
2018-05-21 13:18:41 +01:00
c48e5b6423
Remove unhelpful warning message.
...
It appears far too often with the new libraries.
Fixes: lp:1772255
* https://bugs.launchpad.net/kicad/+bug/1772255
2018-05-20 23:48:29 +01:00
2bab30d9ac
Allow Kicad to use OpenCascade
...
Adds the option of using OpenCascade not just the community edition.
Fixes: lp:1628950
* https://bugs.launchpad.net/kicad/+bug/1628950
2018-05-11 17:04:32 -07:00
aa7da5dfcd
Treat ${...} and $(...) envvar references uniformly.
...
Fixes: lp:1769282
* https://bugs.launchpad.net/kicad/+bug/1769282
2018-05-05 23:40:40 +01:00
eebabf165b
kicad2step: Report lack of model definition rather than empty file names
2018-03-19 17:04:38 +01:00
47e4798423
kicad2step: Report function name and line number only in debug builds
2018-03-19 17:04:38 +01:00
ce610f33a2
Coverity fixes
...
resource leak: #172233
negative array index write: #102363
uninitialized scalar field: #174540 #174539
structurally dead code: #169334 #169331
2018-03-19 10:02:05 +01:00
b327da6e5a
Fix incorrect parsing in kicad2step when a footprint has both locked and placed options activated.
...
Fixes: lp:1742700
https://bugs.launchpad.net/kicad/+bug/1742700
2018-01-15 11:24:09 +01:00
76f5df8a43
Decode "offset" in STEP export tool
...
- Read "at" as inches
- Read "offset" as mm
2017-12-01 16:21:50 +01:00
b80449b069
Fixes for 3D model offset
...
- Display offset units in 3D preview window (inches or mm)
- Fix offset in 3D renderer
- Fix offset in Raytracing renderer
- Fix offset in STEP export
- Fix offset in VRML export
2017-11-20 17:46:03 -05:00
f3908bd87c
Revert premature commit of 17ab319b, "Fixes for 3D model offset".
...
This reverts commit 17ab319b99
2017-11-11 20:04:46 -05:00
17ab319b99
Fixes for 3D model offset
...
- Display offset units in 3D preview window (inches or mm)
- Fix offset in 3D renderer
- Fix offset in Raytracing renderer
- Fix offset in STEP export
- Fix offset in VRML export
2017-11-11 15:08:08 -05:00
c932e4af1b
Added IGES replacement option
...
- If no STEP substitute is found, look for IGES
2017-11-07 08:34:38 -05:00
30455092c8
Replace WRL files with STEP equivalent
...
- Use simple filename matching
- If a STEP file is found, use that instead
- Similar behaviour to the infamous StepUp tool
Fixes lp:1710796
https://bugs.launchpad.net/kicad/+bug/1710796
2017-11-06 18:41:40 -05:00
33e0758636
Fixes: lp:1696204 3D STEP export doesn't handle B.Cu rename
...
https://bugs.launchpad.net/kicad/+bug/1696204
2017-06-08 08:33:14 +02:00
960c139064
Fix UTF8 filename issues in kicad2step
2017-03-14 18:33:14 -04:00
4a1e2644a4
kicad2step was not accepting module names which are valid numbers.
...
Fixes: lp:1660841
https://bugs.launchpad.net/kicad/+bug/1660841
2017-02-01 20:14:57 -05:00
cf1003955d
Added more info to kicad2step parsing failures
2017-02-01 19:43:44 -05:00
1b9c8676df
Fix bug in STEP import with curve intersections.
...
Set BRL precision to 10 nanometers to prevent floating point round errors
from creating arcs that leave gaps in the board outlines. Note: it may
be prudent to make this setting 100 nanometers if there are gerber export
issues.
Fixes lp:1652406
https://bugs.launchpad.net/kicad/+bug/1652406
2017-02-01 19:32:27 -05:00
451cbedd2c
Change KICADMODEL definition from struct to class for consistency
2016-09-26 23:54:34 -04:00
8b8626ceeb
Removed wxT() from kicad2step modules and made modifications to the STEP Export GUI
2016-09-22 08:37:16 -04:00
34fef23bd4
Reworked cmdline options and added output filename option
2016-09-22 08:37:16 -04:00
a9cb10c947
Added --no-virtual option to suppress inclusion of 3D models from components with the virtual attribute
2016-09-22 08:37:16 -04:00
375741eeaa
Modified parser to skip drill specifications for SMD pads
2016-09-22 08:37:16 -04:00
1848a87844
Fixed build conditions to depend on KICAD_USE_OCE (formerly USE_OCE) and removed extra spaces
2016-09-22 08:37:16 -04:00
11a44388ee
Added options to use Drill or Grid origin for outptu STEP file
2016-09-22 08:37:16 -04:00
231b08e58f
Added kicad2step tool.
2016-09-22 08:37:16 -04:00
Jeff Young
Maciej Suminski
jean-pierre charras
Seth Hillbrand
Oliver
Wayne Stambaugh
Cirilo Bernardo
Morgan Quigley