Commit Graph

43 Commits

Author SHA1 Message Date
Seth Hillbrand 5af813c69f Remove extra handler
The extra handler intercepted the action before it could be handled
properly changing the board design settings

Fixes https://gitlab.com/kicad/code/kicad/issues/9410
2021-10-18 15:08:22 -07:00
jean-pierre charras da79a3dd69 Option graphics limited to 45deg in creation: separate options for brd and fp editors.
Add these options in PANEL_EDIT_OPTIONS.
This option was previously living only in some context menus, not really visible.
2021-10-02 16:43:31 +02:00
Jeff Young fdfecf5932 Don't push view control settings to the previous active tool.
See further comments in bug report.

Fixes https://gitlab.com/kicad/code/kicad/issues/9147
2021-09-13 13:28:05 +01:00
Seth Hillbrand 86725db758 Ensure doInteractivePlacement enforces snap option
Fixes https://gitlab.com/kicad/code/kicad/issues/9105
2021-09-06 06:36:33 -07:00
Seth Hillbrand 092cdc0bb5 Move 45° limit to hotkey
This assigns the "Tab" key to a general pcbnew 45° limitation.  Limit
can be enabled/disabled using context menu as well.

Removed the user preference for 45° limitation on graphic lines as that
is overlapping with the general limitation, which is not an editing
preference so much as a temporary adjustment to tool action.

Related to https://gitlab.com/kicad/code/kicad/-/issues/8490
2021-09-05 13:42:51 -07:00
Jeff Young 0d8a9a1091 Make sure that a tool never exits with autopan or capture.
Fixes https://gitlab.com/kicad/code/kicad/issues/8459
2021-05-21 14:53:58 +01:00
Jeff Young 36508807e7 Give the pad placement tool a context menu.
ADDED: allow pad properties to be edited while placing pads.

Fixes https://gitlab.com/kicad/code/kicad/issues/6953
2021-01-15 00:52:03 +00:00
Jeff Young acfbcb4beb Make distinction between PCBNew-wide tools and Board-specific tools.
The old names were really hard to keep straight (even for me, who named
many of them).
2020-12-16 13:32:46 +00:00
Jeff Young 22a6b36257 Don't allow dbl-click to leak through to other tools.
This only applies if the tool doesn't handle properties (which also
handles double-click events).

Fixes https://gitlab.com/kicad/code/kicad/issues/6735
2020-12-14 22:15:43 +00:00
Jeff Young 2260597236 Fix more accidental event capturing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5844
2020-12-06 13:33:23 +00:00
Jeff Young 9e9946628a Go back to arrow cursor on a cancel (or finish).
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
Jeff Young bdbb68f813 MODULE -> FOOTPRINT. 2020-11-13 16:04:03 +00:00
Jeff Young 3451ac3088 PCB_MODULE_T -> PCB_FOOTPRINT_T 2020-11-13 15:16:24 +00:00
Jeff Young 84dd5108ba Remove some "class_" prefixes from files. 2020-11-13 15:16:23 +00:00
Jeff Young 0ebea4be53 Cleanup and naming conventions. 2020-11-07 18:50:30 +00:00
Seth Hillbrand f8a4edb1c9 First pass renaming module to footprint
This is mostly in comments and the few remainin text strings that
reference module
2020-10-20 20:49:11 -07:00
Marek Roszko 558f4b4b51 Add new place cursor, fix cursor hotpoints again 2020-10-10 23:45:21 -04:00
Marek Roszko f5e0754f65 Use the setCursor lambda pattern and fix up the initial cursor states 2020-10-07 23:26:14 -04:00
Mark Roszko d9485129c8 Implement more context specific cursors using both stock and custom cursors. 2020-10-08 00:50:28 +00:00
Seth Hillbrand f493e270ea ADDED: Menu option to enable/disable snap to grid
You can now enable and disable snap to grid when drawing/editing across
all apps.  You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
Seth Hillbrand 4026904cc4 Make grid snapping depend on grid visibility
Turning the grid view on enables snapping to the grid.  Turning it off
removes the snap and allows free draw
2020-09-09 10:18:15 -07:00
Seth Hillbrand 173b4ff588 Add snapping to eeschema
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
Jeff Young 6e72f609f0 Make sure router and via tools update when sizes change.
Also adds a size menu to the context menu for the Via tool.

Fixes https://gitlab.com/kicad/code/kicad/issues/5321
2020-08-31 23:33:02 +01:00
Ian McInerney 0d79ada3ec Show the pencil cursor when placing an item, but it isn't created yet 2020-04-01 18:24:58 +01:00
Jon Evans e59a3d981e Implement a new settings framework across all of KiCad
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme

Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
Seth Hillbrand 6625d0721e Implement Get/Set display options
The pointer passing for display options is deprecated.  This removes the
excess casting as the EDA_FRAME didn't need the base call with no value.
All requests for display options are now returned const and are updated
with a Set() routine after modification.

In Gerbview, this resolves an issue where the display options were not
stored because it was receiving the NULL from EDA_FRAME.
2019-11-07 08:26:44 -08:00
Jeff Young e73e7bdc23 Process via size inc/dec commands while running via tool.
Fixes: lp:1846320
* https://bugs.launchpad.net/kicad/+bug/1846320
2019-10-17 20:17:26 +01:00
Jeff Young 77334628c4 Change default tool behaviour to skip unhandled events.
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly.  wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do.  (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)

I played around with a couple of ways to fix wxEVT_CHAR_HOOK.  Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.

So I’m changing it so that most tools now skip at the end of their
event loops.  I left out a couple that I felt were high risk (length
tuning, for instance).  But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.

Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
2019-07-26 12:21:24 -06:00
Jeff Young 02eb1d2c62 Don't try and run drawing tools in ModEdit with no module selected.
Fixes: lp:1836673
* https://bugs.launchpad.net/kicad/+bug/1836673
2019-07-19 15:29:10 -06:00
Jeff Young 58ca5b71a9 A more robust fix for 36f1d023f0.
This one also handles when the events get out-of-order due to them
starting out in the Simulation window and not getting dispatched until
the mouse goes over the Schematic window.

Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907

Fixes: lp:1836544
* https://bugs.launchpad.net/kicad/+bug/1836544
2019-07-15 14:15:24 +01:00
Jeff Young 37af3adffb Add preference for flip axis.
Fixes: lp:1836267
* https://bugs.launchpad.net/kicad/+bug/1836267
2019-07-14 10:36:48 +01:00
Jeff Young 9effd24f3a Allow move tool to run on top of other tools.
Fixes: lp:1784480
* https://bugs.launchpad.net/kicad/+bug/1784480
2019-07-01 22:15:25 +01:00
Jeff Young 2f23aa9556 Implement a more robust tool stacking architecture.
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop.  (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)

The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
2019-06-27 17:01:31 +01:00
Jeff Young f9702aab87 Immediate actions for PlEditor, PcbNew, etc. 2019-06-25 11:34:28 +01:00
Jeff Young dcbd897a95 Push/pop tools even when selected from the toolbar. 2019-06-18 20:24:15 +01:00
Jeff Young 1f35ec5521 Beware of copying events and losing the m_passEvent flag.
Fixes: lp:1833031
* https://bugs.launchpad.net/kicad/+bug/1833031
2019-06-17 14:44:39 +01:00
Jeff Young 19aba615c2 Remove selection condition from conditional menu separators.
We don't allow duplicate separators anyway so all they really do
is complicate the code.
2019-06-15 20:43:51 +01:00
Jeff Young 8f84c3ec4f Grid rid of GetCanvas/GetGalCanvas distinction now that there's only gal. 2019-06-13 19:58:37 +01:00
Jeff Young 7726b039b2 Re-jigger standard submenus so they both link AND work. 2019-06-11 18:03:16 +01:00
Jeff Young 765606012f Convert separate-compilation of selection.cpp to polymorphism. 2019-06-10 23:46:00 +01:00
Jeff Young 2d40425e4d Move footprint & symbol tree context menus to tool infrastructure.
Fixes: lp:1831692
* https://bugs.launchpad.net/kicad/+bug/1831692
2019-06-05 20:16:48 +01:00
Jeff Young 67cc2aac2e Rework Eeschema find/replace for modern toolset.
Fixes: lp:1827274
* https://bugs.launchpad.net/kicad/+bug/1827274

Fixes: lp:1827240
* https://bugs.launchpad.net/kicad/+bug/1827240
2019-05-22 21:48:04 +01:00
Jeff Young f602ccd814 Insert EE_TOOL_BASE under SchEdit and LibEdit tools, and fix errant rename scope which clobbered PCBNew's PICKER_TOOL. 2019-05-12 13:47:08 +01:00
Renamed from pcbnew/tools/pcb_tool.cpp (Browse further)