* Modify algorithm to correctly calculate the virtual drawing size and
offset required to place the drawing correctly under all conditions.
* Ignore default wxWidgets scroll keys on Windows in EDA_DRAW_PANEL key
event handler.
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
Also fix a minor zoom page issue in Libedit.
wxMSW, version 2.8.x must be patched.
Some zoom values smaller than 3 to 5 create artifacts on screen, mainly values < 1.
(corresponding to draw scale factor > 1 )
* see http://trac.wxwidgets.org/ticket/9554
This is fixed in version 2.9.x
Workaround: ( that is not a full fix, but remaining artifacts are acceptable )
edit file edit file <wxWidgets>/src/msw/dc.cpp
>> search for line
static const int VIEWPORT_EXTENT = 1000;
>> and replace by
static const int VIEWPORT_EXTENT = 10000;
CMake: add definition KICAD_TESTING_VERSION and KICAD_STABLE_VERSION.
One of these 2 options *must* be now defined (i.e. run cmake with option -DKICAD_STABLE_VERSION or -DKICAD_TESTING_VERSION
Stable and testing branches should be more easier to maintain.
In Render, colors shown were the default colors, not the selected colors, when starting Pcbnew or Gerbview,
because colors were not updated after reading the config.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Use C++ map in component library instead of boost::ptr_vector.
* Drop Boost pointer containers for standard C++ containers.
* Moved duplicate name user interface elements from library object to
library editor.
* Added code to support direct addition and replacement of component
alias objects into libraries.
* Removed temporary strings used to add and remove alias objects.
* Libraries only store alias objects, components now accessed thru alias.
* Simplify library API for adding, removing, and replacing components.
* Updated edit component in library dialog and library editor to reflect
component library object changes.
* Fixed bug in library viewer when displaying alias name.
* Made a few header files compile stand alone per the new coding policy.
* Remove some dead code and the usual code formatting fixes.
* Implement code to allow wxDC to handle coordinate conversions between
device and drawing units.
* Add build settings to enable wxGCDC for wxGraphicsContext testing.
* Remove wxAUI conditional build cruft as it is now required to build
Kicad.
* Fix scroll increment size regression to prevent jumping around the
zoom center position.
* Add find GDI+ cmake module for building on WXMSW when wxGraphicsContext
is enabled.
* Complete comment translation for all EESchema source files.
* Complete comment translation for all 3D viewer source files.
* Rename class class_hierarchical_PIN_sheet to SCH_SHEET_PIN.
* Rename class DrawSheetStruct to SCH_SHEET.
* Tool tip capitalization fixes.
* Uncrustify and spell check comments and strings in all modified source
files.
* Replace all known instances of (const wxChar*) casts to GetChars() for
wxWidgets 2.9 compatibility.
* Cleaned up get component dialog so last part gets saved on wild card
selections.
* Remove redundant schematic component drawing code.
* Added SCH_COMPONENT constructor to create new component from library
component object.
* Add message panel helpers to WinEDA_DrawFrame and update old message
panel access code.
* Using library viewer to add component to schematic now respects unit
and body style selection.
* Create single event handler for grid size events.
* Fix all frame windows to use new grid size event handler.
* Use offset relative to ID instead of ComboBox index to save last grid size.
* Move last grid size load/save setting into WinEDA_DrawFrame.
* Add equality and assignment operators the GRID_TYPE.
* Add current grid helper methods to BASE_SCREEN.
* Add GetPins helper to LIB_COMPONENT to replace GetNextPin where applicable.
* Add AppendMsgPanel helper to WinEDA_DrawFrame.
* Improve rounding for display of coordinates when millimeter units are selected.
* Component library viewer restores state between uses.
* Fixed automatic zoom calculations in library viewer.
* Make library entry list dialog restore previous selection.
* Fix bounding box calculation for vertical field and text draw objects.
* Changed library draw object comparison to test for greater and less than.
* Initial preparation for merging separate library component draw item lists.
* Component library objects renamed for improved readability.
* Fields now move when selected in library editor.
* Add copy constructor to all library draw and library component objects.
* Added copy constructor to EDA_BaseStruct.
* Delete base screen in WinEDA_DrawFrame destructor to prevent potential memory leak.
* Fixed memory access bug when replacing and adding a component to library.
* Moved library component block manipulation code into component object.
* Removed all of the global variables used by the library editor main window object.
* The usual code cleaning and refactoring.
* Split out application specific command IDs to prevent unnecessary rebuilding.
* Eliminate duplicate menu and tool bar command IDs.
* Split component library editor and viewer definitions to separate header files.
* More component library and document file merge code.
* A bunch of minor string readability and consistency fixes.
* Create static component library methods to manage library list.
* Rename component library, component, and alias objects to more readable name.
* Use pointer to component instead of root name to prevent redundant library searches.
* Add append message helper to message panel that calculates string length.
* Initial ground work for merging library and library document files.
* Improved component library file load error checking.
* Minor component library editor improvements.
* Add offset and block hit testing to library component objects.
* Improved search for library entries.
* Fixed library component editor component removal and addition.
* Library editor now uses wxUpdateUIEvents for updating all UI objects.
* Added version check to cmake find boost macro.
* Removed unused code in file libalias.cpp.
* Added method to WinEDA_DrawPanel to take mouse out of managed mode.
* Replaced WinEDAListBox buttons with wxStdDialogButtonSizer.
* Moved library draw entries GenCopy method to base class.
* Remove priorque.cpp and priorque.h from CMakeLists.txt.
* The usual code cleaning and uncrustification.
Moved all library entry manipulation code scattered throughout EESchema into
the component library object itself. Adding, removing, and searching is now
handled by the library object. This is the precursor to replacing the current
priority queue code.
Wayne Stambaugh
Hauptmech
Dick Hollenbeck
jean-pierre charras
charras