The symbol was wrong (copied from Slovakian flag) and the
blue colour was not the same as the flag on Wikipedia (which
does admittedly seem contentious, but they seem to have reached
some kind of consensus).
(cherry picked from commit de055031a3)
Some how a board object was required to fetch the line width when a
footprint is being parsed. The problem is that there is no board
defined when loading Eagle footprint libraries so there was a nullptr
segfault as a result. When there is no board defined, use the default
KiCad layer line widths.
Fixes lp:1829243
https://bugs.launchpad.net/kicad/+bug/1829243
(cherry picked from commit 97166a72f5)
Replace INCREMENTAL_TEXT_CTRL with wxSpinCtrlDouble because it looks
and works better.
Remove INCREMENTAL_TEXT_CTRL header and source files because the only
place they were used was in GAL_OPTIONS_PANEL.
(cherry picked from commit f08d040c02)
The default is meant to be "Save" but "Discard" was selected due to ID
ordering on creation. Setting the focus before setting the default
makes the "Save" option the highlighted option that can be selected
immediately by pressing enter.
(cherry picked from commit a0f477cc5f)
Note that the comment in line 142 where the scale factor was set had the
correct value to indicate metric (1) but in the actual boilerplate, we
set imperial (0). This has been around for 6-8 years, so it would seem
DXF is not our most popular export.
Note, I initially tried to use '1' to specify metric units but this was
not handled by DXF readers (QCAM, Inkscape). Instead, scaling the page
units to inches properly seems to work.
(cherry picked from commit 0eb391b13f)
so they will not be zero when viewing the board com the top/bot.
This was causing problems with BBox intersect function that was using
invDir values.
Fixes lp:1828747
https://bugs.launchpad.net/kicad/+bug/1828747
This is a stop gap fix. It should be possible to use the wxFrame title
string for this but some of the frame windows have appropriated the title
string for configuration file naming purposes which is less than ideal.
Fixes lp:1825977
https://bugs.launchpad.net/kicad/+bug/1825977
(cherry picked from commit 3c4f8c1bf7)
When using "Place Text" the crosshair was freezing if cancelled before
placing text.
After the crosshair freezes, the next uses of the "Place Text" or
"Add Dimension" caused the crosshair to jump to the screen location
where the previously the crosshair was frozen.
Cancelling the "Add Dimension" caused the crosshair to jump to the
screen location where the crosshair was when cancelled on the next use
of the "Place Text" or "Add Dimension".
Fixes: lp:1822578
* https://bugs.launchpad.net/kicad/+bug/1822578
Prevent user from pasting text with carriage return and/or line feed
characters in field value edit control in the schematic symbol and symbol
library properties dialogs.
Make all objects derived from GRID_CELL_TEXT_BUTTON use validators
correctly.
Add validators to FIELDS_GRID_TABLE object for field values other than
the mandatory fields.
Create a validator to check that a string is a valid LIB_ID.
Fixes lp:1828214
https://bugs.launchpad.net/kicad/+bug/1828214
(cherry picked from commit ae54f34392)
The SVG importer is an advanced config. It's not supported or
normally available in 5.1, so don't advertise in the menu.
If the advanced config is enabled, the dialog will be able
to import SVG.
This could have been "Import *Vector* Graphics" like in master,
5.1 documentation will probably still say "DXF", so keep consistent.
Fixes: lp:1821571
* https://bugs.launchpad.net/kicad/+bug/1821571
Remove version 5 road map since version 5 has been released.
Update version 6 road map to reflect current development goals.
Cleaned out old goals from generic road map in preparation for version
7 development.
Add note to compiling document about building with Boost 1.70 on Windows.
Fix link to Linux coding style policy in KiCad Coding Style Guide.
Update tool framework documentation to reflect changes in the tool
framework code.
(cherry picked from commit 3caa4376a5)
Commit e10c01aaf didn't work when touchpad panning was enabled.
This commit changes it to only discard horizontal wheel events
when in "scroll mode" rather than "pan mode".
Based on a patch by Adrian Scripcă <benishor@gmail.com>.
Follow-up to fix: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
(cherry picked from commit e6fe220f84)
Modern mice feature horizontal scrolling capabilities and those end
up being treated by KiCad as regular scroll events causing confusion
among users.
The fix works by discarding the handling of wheel events other than
the ones for the vertical axis.
Fixes: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
(cherry picked from commit e10c01aaff)
When, inside a complex hierarchy, one switch from an instance of a sheet to an other instance of this sheet,
the page number shown in the worksheet was not updated on screen, and the initial number was displayed.
Fix from master branch.
Currently, the format enforces single lines when possible, but does
not enforce readable column-based alignment (and, moreover, *removes*
such manually added alignment:
switch( m_orientation )
{
case PIN_RIGHT: m_orientation = PIN_UP; break;
case PIN_UP: m_orientation = PIN_LEFT; break;
}
Change this to multi-line by default:
switch( m_orientation )
{
case PIN_RIGHT:
m_orientation = PIN_UP;
break;
case PIN_UP:
m_orientation = PIN_LEFT;
break;
}
If the developer wishes for column-aligned single-line cases, this
is permitted, but much be done manually:
switch( m_orientation )
{
case PIN_RIGHT: m_orientation = PIN_DOWN; break;
case PIN_UP: m_orientation = PIN_RIGHT; break;
}
CHANGE: the _clang-format file to reflect this, and add note about
manual override in the dev docs.
(cherry picked from commit 272c045c37)
(cherry picked from commit 4d776034ca)
This also picks up an additional line from 45aa514591 that keeps
CMakeModules/*.cmake. The rest of that commit does not merge cleanly.
Force the symbol library links whenever the symbol library table has been
modified. This will use the cache as a fallback when a library has been
removed that contains links in the schematic rather than display.
Fix the SCH_COMPONENT symbol resolver when falling back to the cache. The
resolver was using the LIB_ID ':' notation which was failing. Replacing
':' with '_' fixed this issue. This was also an issue when generating the
symbol message panel information.
Convert wxLogDebug to wxLogTrace in symbol resolver code path. Add new
trace type KICAD_SYM_RESOLVE.
Fixes lp:1821606
https://bugs.launchpad.net/kicad/+bug/1821606
(cherry picked from commit 7d803437e2)
When Pcbnew's add footprint browser is run up, it constructs
the recently used list without checking for nulls.
Although the DoAddLibrary call does internally check for
null, it's easier to filter these out before placing into
the vector in the first place.
The same logic in the symbol tree is already handled in the
same way.
(cherry picked from commit 42d20cbd96)
There is a rendering bug in GTK3, which appears to be
an upstream GTK issue.
This can be worked around by, when filtering, ensuring the
*parent* item of the selected item is visible. This will
not cause the selected item to not be visible, as the selected
item will be the first shown child. So it will be visible, as long
as the list box is greater than a single row high, which it will be
in all practical scenarios.
This is done on all platforms, as it has a beneficial side-effect:
the parent library of the selection is naturally shown to the
user, so they don't need to scroll up to see what library their
current filter selection was in.
Fixes: lp:1804400
* https://bugs.launchpad.net/kicad/+bug/1804400
(cherry picked from commit 10900c918f)
This can be helpful when tracing where certain configurations
come from (some apps load from other apps' config basenames).
(cherry picked from commit fcc4a84e0e)
Currently, this widget doesn't read the common library settings.
This means it doesn't use the configured DPI scaling or anti-aliasing
settings.
Use the ReadConfig method on the GAL options to fix (rather than
only ReadAppConfig).
Fixes: lp:1825913
* https://bugs.launchpad.net/kicad/+bug/1825913
(cherry picked from commit 33fe9a2761)
These dialogs had logic to avoid a table re-adjustment unless
the width changed. This was done to avoid spurious resizing
calls under GTK+3. This was commit
13249b723b, fixing bug lp:1817810.
However, by only calling event.Skip() when the width changed,
redraws were inhibited when only the height changed.
Placing the Skip() outside the width-change check fixes this,
and does not re-introduce the lp:1817810 bug (it is the column
adjust call that causes that).
Fixes: lp:1826615
* https://bugs.launchpad.net/kicad/+bug/1826615
(cherry picked from commit eccadd92fb)
This fixes the bug exposed in the previous commit.
The tests which exposed it now pass and expected failures
removed.
(cherry picked from commit d89d0e6b74)
The angle needs to be added to the start angle.
Add tests to cover this:
* Check end point is correct
* Check midpoints are within tolerance
This would have prevented the bug fixed in 5813164d1,
as well as the bug fixed in this commit.
As well as failed tests, this manifests when routing across
Edge.Cuts arcs (unless they happen to start at 0 degrees
staritng angle).
Expose as expected failure to prove tests catch it.
Fix to follow in separate commit.
(cherry picked from commit 183f4fe9a5)
Jon Evans
John Beard
Seth Hillbrand
Wayne Stambaugh
jean-pierre charras
Mario Luzeiro
Henner Zeller
Jeff Young
Martin McNamara
Mark
Michael Kavanagh
Adrian Scripca
Tomasz Włostowski