kicad/pcbnew/edgemod.cpp

421 lines
13 KiB
C++

/******************************************************/
/* Edition des contours d'un module: Routines */
/* d'effacement et d'edition de segments et contours */
/* appartenant aux modules */
/******************************************************/
/* fichier edgemod.cpp */
/* Routines d'edition des contours d'un module.
* La correction des Arcs de cercle n'est pas traitee ( mais
* les menus en routines sont prevus
*/
#include "fctsys.h"
#include "gr_basic.h"
#include "trigo.h"
#include "common.h"
#include "pcbnew.h"
#include "protos.h"
/* Routines Locales */
static void ShowEdgeModule( WinEDA_DrawPanel* panel, wxDC* DC, bool erase );
static void Exit_EditEdge_Module( WinEDA_DrawPanel* Panel, wxDC* DC );
static void Move_Segment( WinEDA_DrawPanel* panel, wxDC* DC, bool erase );
/* Variables locales : */
int ArcValue = 900;
static wxPoint MoveVector; // Move vector for move edge
static wxPoint CursorInitialPosition; // Mouse cursor inital position for move command
/****************************************************************************/
void WinEDA_ModuleEditFrame::Start_Move_EdgeMod( EDGE_MODULE* Edge, wxDC* DC )
/****************************************************************************/
/* Routine de preparation du deplacement d'un element graphique type DRAWSEGMENT
*/
{
if( Edge == NULL )
return;
Edge->Draw( DrawPanel, DC, wxPoint( 0, 0 ), GR_XOR );
Edge->m_Flags |= IS_MOVED;
MoveVector.x = MoveVector.y = 0;
CursorInitialPosition = GetScreen()->m_Curseur;
DrawPanel->ManageCurseur = Move_Segment;
DrawPanel->ForceCloseManageCurseur = Exit_EditEdge_Module;
GetScreen()->SetCurItem( Edge );
DrawPanel->ManageCurseur( DrawPanel, DC, FALSE );
}
/*********************************************************************/
void WinEDA_ModuleEditFrame::Place_EdgeMod( EDGE_MODULE* Edge, wxDC* DC )
/*********************************************************************/
/*
* Routine de placement de l'element graphique type EDGE_MODULE en cours de deplacement
*/
{
if( Edge == NULL )
return;
Edge->m_Start.x -= MoveVector.x;
Edge->m_Start.y -= MoveVector.y;
Edge->m_End.x -= MoveVector.x;
Edge->m_End.y -= MoveVector.y;
Edge->m_Start0.x -= MoveVector.x;
Edge->m_Start0.y -= MoveVector.y;
Edge->m_End0.x -= MoveVector.x;
Edge->m_End0.y -= MoveVector.y;
Edge->Draw( DrawPanel, DC, wxPoint( 0, 0 ), GR_OR );
Edge->m_Flags = 0;
DrawPanel->ManageCurseur = NULL;
DrawPanel->ForceCloseManageCurseur = NULL;
GetScreen()->SetCurItem( NULL );
GetScreen()->SetModify();
MODULE* Module = (MODULE*) Edge->m_Parent;
Module->Set_Rectangle_Encadrement();
}
/************************************************************************/
static void Move_Segment( WinEDA_DrawPanel* panel, wxDC* DC, bool erase )
/************************************************************************/
/* redessin du contour du Segment Edge lors des deplacements de la souris */
{
BASE_SCREEN* screen = panel->GetScreen();
EDGE_MODULE* Edge = (EDGE_MODULE*) screen->GetCurItem();
if( Edge == NULL )
return;
MODULE* Module = (MODULE*) Edge->m_Parent;
if( erase )
{
Edge->Draw( panel, DC, MoveVector, GR_XOR );
}
MoveVector.x = -(screen->m_Curseur.x - CursorInitialPosition.x);
MoveVector.y = -(screen->m_Curseur.y - CursorInitialPosition.y);
Edge->Draw( panel, DC, MoveVector, GR_XOR );
Module->Set_Rectangle_Encadrement();
}
/************************************************************************/
static void ShowEdgeModule( WinEDA_DrawPanel* panel, wxDC* DC, bool erase )
/************************************************************************/
/* Affiche le segment Edge Module en cours de trace
*/
{
BASE_SCREEN* screen = panel->GetScreen();
EDGE_MODULE* Edge = (EDGE_MODULE*) screen->GetCurItem();
if( Edge == NULL )
return;
MODULE* Module = (MODULE*) Edge->m_Parent;
// if( erase )
{
Edge->Draw( panel, DC, wxPoint( 0, 0 ), GR_XOR );
}
Edge->m_End = screen->m_Curseur;
/* Mise a jour des coord relatives */
Edge->m_End0.x = Edge->m_End.x - Module->m_Pos.x;
Edge->m_End0.y = Edge->m_End.y - Module->m_Pos.y;
RotatePoint( (int*) &Edge->m_End0.x,
(int*) &Edge->m_End0.y, -Module->m_Orient );
Edge->Draw( panel, DC, wxPoint( 0, 0 ), GR_XOR );
Module->Set_Rectangle_Encadrement();
}
/***************************************************************************/
void WinEDA_ModuleEditFrame::Edit_Edge_Width( EDGE_MODULE* Edge, wxDC* DC )
/***************************************************************************/
/* change la largeur du EDGE_MODULE Edge, ou de tous si Edge == NULL
*/
{
MODULE* Module = m_Pcb->m_Modules;
SaveCopyInUndoList( Module );
if( Edge == NULL )
{
Edge = (EDGE_MODULE*) Module->m_Drawings;
for( ; Edge != NULL; Edge = (EDGE_MODULE*) Edge->Pnext )
{
if( Edge->m_StructType != TYPEEDGEMODULE )
continue;
Edge->m_Width = ModuleSegmentWidth;
}
}
else
Edge->m_Width = ModuleSegmentWidth;
GetScreen()->SetModify();
DrawPanel->Refresh( TRUE );
Module->Set_Rectangle_Encadrement();
Module->m_LastEdit_Time = time( NULL );
}
/***************************************************************************/
void WinEDA_ModuleEditFrame::Edit_Edge_Layer( EDGE_MODULE* Edge, wxDC* DC )
/***************************************************************************/
/* change la couche du EDGE_MODULE Edge, ou de tous si Edge == NULL
*/
{
MODULE* Module = m_Pcb->m_Modules;
int new_layer = SILKSCREEN_N_CMP;
new_layer = SelectLayer( SILKSCREEN_N_CMP, LAYER_CUIVRE_N, LAST_NO_COPPER_LAYER );
if( new_layer < 0 )
return;
SaveCopyInUndoList( Module );
if( Edge == NULL )
{
Edge = (EDGE_MODULE*) Module->m_Drawings;
for( ; Edge != NULL; Edge = (EDGE_MODULE*) Edge->Pnext )
{
if( Edge->m_StructType != TYPEEDGEMODULE )
continue;
Edge->m_Layer = new_layer;
}
}
else
Edge->m_Layer = new_layer;
GetScreen()->SetModify();
Module->Set_Rectangle_Encadrement();
Module->m_LastEdit_Time = time( NULL );
DrawPanel->Refresh( TRUE );
}
/*************************************************************************/
void WinEDA_ModuleEditFrame::Enter_Edge_Width( EDGE_MODULE* Edge, wxDC* DC )
/*************************************************************************/
/*
* Entre la nouvelle valeur pour ModuleSegmentWidth.
* change la largeur du EDGE_MODULE Edge si Edge != NULL
*/
{
wxString buffer;
long ll;
buffer << ModuleSegmentWidth;
if( Get_Message( _( "New Width (1/10000\"):" ), buffer, this ) )
return;
if( buffer.ToLong( &ll ) )
ModuleSegmentWidth = ll;
else
{
DisplayError( this, _( "Incorrect number, no change" ) );
return;
}
if( Edge )
{
MODULE* Module = m_Pcb->m_Modules;
Module->DrawEdgesOnly( DrawPanel, DC, wxPoint( 0, 0 ), GR_XOR );
Edge->m_Width = ModuleSegmentWidth;
Module->DrawEdgesOnly( DrawPanel, DC, wxPoint( 0, 0 ), GR_XOR );
Module->Set_Rectangle_Encadrement();
GetScreen()->SetModify();
}
}
/****************************************************************************/
void WinEDA_ModuleEditFrame::Delete_Edge_Module( EDGE_MODULE* Edge, wxDC* DC )
/****************************************************************************/
{
if( Edge == NULL )
return;
if( Edge->m_StructType != TYPEEDGEMODULE )
{
DisplayError( this, wxT( "StructType error: TYPEEDGEMODULE expected" ) );
return;
}
MODULE* Module = (MODULE*) Edge->m_Parent;
Edge->Draw( DrawPanel, DC, wxPoint( 0, 0 ), GR_XOR );
/* suppression d'un segment */
DeleteStructure( Edge );
Module->m_LastEdit_Time = time( NULL );
Module->Set_Rectangle_Encadrement();
GetScreen()->SetModify();
}
/******************************************************************/
static void Exit_EditEdge_Module( WinEDA_DrawPanel* Panel, wxDC* DC )
/******************************************************************/
{
EDGE_MODULE* Edge = (EDGE_MODULE*) Panel->GetScreen()->GetCurItem();
if( Edge && (Edge->m_StructType == TYPEEDGEMODULE) ) /* error si non */
{
if( Edge->m_Flags & IS_NEW ) /* effacement du nouveau contour */
{
MODULE* Module = (MODULE*) Edge->m_Parent;
Edge->Draw( Panel, DC, MoveVector, GR_XOR );
DeleteStructure( Edge );
Module->Set_Rectangle_Encadrement();
}
else
{
Edge->Draw( Panel, DC, MoveVector, GR_XOR );
Edge->m_Flags = 0;
Edge->Draw( Panel, DC, wxPoint( 0, 0 ), GR_OR );
}
}
Panel->ManageCurseur = NULL;
Panel->ForceCloseManageCurseur = NULL;
Panel->GetScreen()->SetCurItem( NULL );
}
/*************************************************************************/
EDGE_MODULE* WinEDA_ModuleEditFrame::Begin_Edge_Module( EDGE_MODULE* Edge,
wxDC* DC, int type_edge )
/*************************************************************************/
/* Fonction de debut de trace d'un nouveau contour.
* - Cree la place en memoire du nouveau contour
* - Prepare les coord des differents points
* - Met a jour la variable type_edge (= S_SEGMENT,S_ARC ...)
*/
{
MODULE* Module = m_Pcb->m_Modules;
int angle = 0;
if( Module == NULL )
return NULL;
if( Edge == NULL ) /* debut reel du trace */
{
SaveCopyInUndoList( Module );
Edge = new EDGE_MODULE( Module );
MoveVector.x = MoveVector.y = 0;
/* Chainage du nouvel element, en tete de liste Drawings */
Edge->Pback = Module;
Edge->Pnext = Module->m_Drawings;
if( Module->m_Drawings )
Module->m_Drawings->Pback = Edge;
Module->m_Drawings = Edge;
/* Mise a jour des caracteristiques du segment ou de l'arc */
Edge->m_Flags = IS_NEW;
Edge->m_Angle = angle;
Edge->m_Shape = type_edge;
if( Edge->m_Shape == S_ARC )
Edge->m_Angle = ArcValue;
Edge->m_Width = ModuleSegmentWidth;
Edge->m_Layer = Module->m_Layer;
if( Module->m_Layer == CMP_N )
Edge->m_Layer = SILKSCREEN_N_CMP;
if( Module->m_Layer == CUIVRE_N )
Edge->m_Layer = SILKSCREEN_N_CU;
/* Mise a jour du point de depart du segment ou de l'arc */
Edge->m_Start = GetScreen()->m_Curseur;
/* Mise a jour de la fin du segment , rectangle ou de l'arc*/
Edge->m_End = Edge->m_Start;
/* Mise a jour des coord relatives */
Edge->m_Start0.x = Edge->m_Start.x - Module->m_Pos.x;
Edge->m_Start0.y = Edge->m_Start.y - Module->m_Pos.y;
RotatePoint( (int*) &(Edge->m_Start0.x),
(int*) &(Edge->m_Start0.y), -Module->m_Orient );
Edge->m_End0 = Edge->m_Start0;
Module->Set_Rectangle_Encadrement();
DrawPanel->ManageCurseur = ShowEdgeModule;
DrawPanel->ForceCloseManageCurseur = Exit_EditEdge_Module;
}
else /* trace en cours : les coord du point d'arrivee ont ete mises
* a jour par la routine Montre_Position_New_Edge_Module*/
{
if( type_edge == S_SEGMENT )
{
if( (Edge->m_Start0.x) != (Edge->m_End0.x)
|| (Edge->m_Start0.y) != (Edge->m_End0.y) )
{
Edge->Draw( DrawPanel, DC, wxPoint( 0, 0 ), GR_OR );
EDGE_MODULE* newedge = new EDGE_MODULE( Module );
newedge->Copy( Edge );
newedge->AddToChain( Edge );
Edge->m_Flags = 0;
Edge = newedge;
Edge->m_Flags = IS_NEW;
Edge->m_Width = ModuleSegmentWidth;
Edge->m_Start = GetScreen()->m_Curseur;
Edge->m_End = Edge->m_Start;
/* Mise a jour des coord relatives */
Edge->m_Start0.x = Edge->m_Start.x - Module->m_Pos.x;
Edge->m_Start0.y = Edge->m_Start.y - Module->m_Pos.y;
RotatePoint( (int*) &(Edge->m_Start0.x),
(int*) &(Edge->m_Start0.y), -Module->m_Orient );
Edge->m_End0 = Edge->m_Start0;
Module->Set_Rectangle_Encadrement();
Module->m_LastEdit_Time = time( NULL );
GetScreen()->SetModify();
}
}
else
DisplayError( this, wxT( "Begin_Edge() error" ) );
}
return Edge;
}
/*************************************************************************/
void WinEDA_ModuleEditFrame::End_Edge_Module( EDGE_MODULE* Edge, wxDC* DC )
/*************************************************************************/
{
MODULE* Module = m_Pcb->m_Modules;
/* test du dernier segment: si null: suppression */
if( Edge )
{
if( (Edge->m_Start.x == Edge->m_End.x)
&& (Edge->m_Start.y == Edge->m_End.y) )
{
DeleteStructure( Edge );
}
}
Edge->m_Flags = 0;
Module->Set_Rectangle_Encadrement();
Module->m_LastEdit_Time = time( NULL );
GetScreen()->SetModify();
DrawPanel->ManageCurseur = NULL;
DrawPanel->ForceCloseManageCurseur = NULL;
}