kicad/pcbnew/move_copy_track.cpp

646 lines
18 KiB
C++

/****************************************************/
/* Edition des pistes */
/* Routines de duplication et deplacement de pistes */
/****************************************************/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "pcbnew.h"
#include "autorout.h"
#include "drag.h"
#include "protos.h"
/* Routines externes */
static void Show_MoveTrack(WinEDA_DrawPanel * panel, wxDC * DC, bool erase);
static void Exit_MoveTrack(WinEDA_DrawPanel * Panel, wxDC *DC);
#if 0
/* Routines Locales */
static void Duplic_Track(COMMAND * Cmd);
static void Place_Dupl_Route(COMMAND * Cmd);
#endif
/* variables locales */
static wxPoint PosInit, LastPos;
static TRACK * NewTrack; /* Nouvelle piste creee ou piste deplacee */
static int NbPtNewTrack;
static int Old_HightLigth_NetCode;
static bool Old_HightLigt_Status;
/**************************************************************/
static void Exit_MoveTrack(WinEDA_DrawPanel * Panel, wxDC *DC)
/***************************************************************/
/* routine d'annulation de la commande drag, copy ou move track si une piste est en cours
de tracage, ou de sortie de l'application EDITRACK.
Appel par la touche ESC
*/
{
TRACK * NextS;
int ii;
/* Effacement du trace en cours */
wxPoint oldpos = Panel->GetScreen()->m_Curseur;
Panel->GetScreen()->m_Curseur = PosInit;
Panel->ManageCurseur(Panel, DC, TRUE);
Panel->GetScreen()->m_Curseur = oldpos;
g_HightLigt_Status = FALSE;
( (WinEDA_PcbFrame *)Panel->m_Parent)->DrawHightLight( DC, g_HightLigth_NetCode) ;
if( NewTrack )
{
if (NewTrack->m_Flags & IS_NEW )
{
for( ii = 0; ii < NbPtNewTrack; ii++, NewTrack = NextS)
{
if(NewTrack == NULL) break;
NextS = (TRACK*) NewTrack->Pnext;
delete NewTrack;
}
}
else /* Move : remise en ancienne position */
{
TRACK * Track = NewTrack;
int dx = LastPos.x - PosInit.x;
int dy = LastPos.y - PosInit.y;
for( ii = 0; ii < NbPtNewTrack; ii++, Track = (TRACK*) Track->Pnext)
{
if( Track == NULL ) break;
Track->m_Start.x -= dx;
Track->m_Start.y -= dy;
Track->m_End.x -= dx;
Track->m_End.y -= dy;
Track->m_Flags = 0;
}
Trace_Une_Piste(Panel, DC, NewTrack,NbPtNewTrack,GR_OR);
}
NewTrack = NULL;
}
Panel->ManageCurseur = NULL;
Panel->ForceCloseManageCurseur = NULL;
Panel->GetScreen()->m_CurrentItem = NULL;
Panel->m_Parent->EraseMsgBox();
/* Annulation deplacement et Redessin des segments dragges */
DRAG_SEGM * pt_drag = g_DragSegmentList;
for( ; pt_drag != NULL; pt_drag = pt_drag->Pnext)
{
TRACK * Track = pt_drag->m_Segm;
pt_drag->SetInitialValues();
Track->SetState(EDIT,OFF);
Track->m_Flags = 0;
Track->Draw(Panel, DC, GR_OR);
}
g_HightLigth_NetCode = Old_HightLigth_NetCode;
g_HightLigt_Status = Old_HightLigt_Status;
if(g_HightLigt_Status)
( (WinEDA_PcbFrame *)Panel->m_Parent)->DrawHightLight( DC, g_HightLigth_NetCode) ;
EraseDragListe();
}
/*************************************************************************/
static void Show_MoveTrack(WinEDA_DrawPanel * panel, wxDC * DC, bool erase)
/*************************************************************************/
/* redessin du contour de la piste lors des deplacements de la souris */
{
int ii, dx, dy;
TRACK * Track;
BASE_SCREEN * screen = panel->GetScreen();
int track_fill_copy = DisplayOpt.DisplayPcbTrackFill;
DisplayOpt.DisplayPcbTrackFill = SKETCH ;
erase = TRUE;
/* efface ancienne position si elle a ete deja dessinee */
if( erase )
{
if ( NewTrack ) Trace_Une_Piste(panel, DC, NewTrack,NbPtNewTrack,GR_XOR) ;
}
/* mise a jour des coordonnees des segments de la piste */
wxPoint Pos = screen->m_Curseur;
dx = Pos.x - LastPos.x;
dy = Pos.y - LastPos.y;
LastPos = Pos;
ii = NbPtNewTrack, Track = NewTrack;
for( ; ii > 0; ii--, Track = Track->Next() )
{
if( Track->m_Flags & STARTPOINT)
{
Track->m_Start.x += dx; Track->m_Start.y += dy;
}
if( Track->m_Flags & ENDPOINT)
{
Track->m_End.x += dx; Track->m_End.y += dy;
}
}
/* dessin de la nouvelle piste */
Trace_Une_Piste(panel, DC, NewTrack,NbPtNewTrack,GR_XOR) ;
/* Tracage des segments dragges */
DRAG_SEGM * pt_drag = g_DragSegmentList;
for( ; pt_drag != NULL; pt_drag = pt_drag->Pnext)
{
Track = pt_drag->m_Segm;
if ( erase ) Track->Draw(panel, DC, GR_XOR);
if( Track->m_Flags & STARTPOINT)
{
Track->m_Start.x += dx; Track->m_Start.y += dy;
}
if( Track->m_Flags & ENDPOINT)
{
Track->m_End.x += dx; Track->m_End.y += dy;
}
Track->Draw(panel, DC, GR_XOR);
}
DisplayOpt.DisplayPcbTrackFill = track_fill_copy ;
}
/***********************************************************************************/
void WinEDA_PcbFrame::Start_MoveOneTrackSegment(TRACK * track, wxDC * DC, bool Drag)
/***********************************************************************************/
{
/* Change hight light net: the new one will be hightlighted */
Old_HightLigt_Status = g_HightLigt_Status;
Old_HightLigth_NetCode = g_HightLigth_NetCode;
if(g_HightLigt_Status) Hight_Light(DC);
if ( Drag && track->m_StructType == TYPEVIA)
{
track->m_Flags = IS_DRAGGED|STARTPOINT|ENDPOINT;
Collect_TrackSegmentsToDrag(DrawPanel, DC, track->m_Start,
track->ReturnMaskLayer(), track->m_NetCode);
NewTrack = track;
NbPtNewTrack = 1;
PosInit = track->m_Start;
}
else
{
int diag = track->IsPointOnEnds(GetScreen()->m_Curseur, -1);
wxPoint pos = (diag & STARTPOINT) ? track->m_Start : track->m_End;
Collect_TrackSegmentsToDrag(DrawPanel, DC, pos,
track->ReturnMaskLayer(), track->m_NetCode);
track->m_Flags |= IS_DRAGGED;
NewTrack = NULL;
NbPtNewTrack = 0;
PosInit = pos;
}
LastPos = PosInit;
DrawPanel->ManageCurseur = Show_MoveTrack;
DrawPanel->ForceCloseManageCurseur = Exit_MoveTrack;
g_HightLigth_NetCode = track->m_NetCode;
g_HightLigt_Status = TRUE;
DrawHightLight( DC, g_HightLigth_NetCode) ;
DrawPanel->ManageCurseur(DrawPanel, DC, TRUE);
}
/**********************************************************************/
bool WinEDA_PcbFrame::PlaceDraggedTrackSegment(TRACK * Track, wxDC * DC)
/**********************************************************************/
/* Place a dragged track segment or via */
{
int errdrc;
DRAG_SEGM * pt_drag;
if(Track == NULL ) return FALSE;
// DRC control:
if(Drc_On)
{
errdrc = Drc(this, DC, Track, m_Pcb->m_Track,1);
if(errdrc == BAD_DRC) return FALSE;
/* Tracage des segments dragges */
pt_drag = g_DragSegmentList;
for( ; pt_drag; pt_drag = pt_drag->Pnext)
{
errdrc = Drc(this, DC, pt_drag->m_Segm, m_Pcb->m_Track,1);
if(errdrc == BAD_DRC) return FALSE;
}
}
// DRC Ok: place track segments
Track->m_Flags = 0;
Track->Draw(DrawPanel, DC, GR_OR);
/* Tracage des segments dragges */
pt_drag = g_DragSegmentList;
for( ; pt_drag; pt_drag = pt_drag->Pnext)
{
Track = pt_drag->m_Segm;
Track->SetState(EDIT,OFF);
Track->m_Flags = 0;
Track->Draw(DrawPanel, DC, GR_OR);
}
EraseDragListe();
GetScreen()->SetModify();
DrawPanel->ManageCurseur = NULL;
DrawPanel->ForceCloseManageCurseur = NULL;
return TRUE;
}
#if 0
/***********************************************/
void WinEDA_PcbFrame::Place_Dupl_Route(Track * Track, wxDC * DC)
/******************************************/
/*
Routine de placement d'une piste (succession de segments)
*/
{
D_PAD * pt_pad;
TRACK * pt_track, *Track, * pt_classe, *NextS;
int masquelayer;
EDA_BaseStruct * LockPoint;
int ii, old_net_code, new_net_code, DRC_error = 0;
wxDC * DC = Cmd->DC;
ActiveDrawPanel->ManageCurseur = NULL;
if( NewTrack == NULL ) return ;
old_net_code = NewTrack->net_code;
/* Placement du flag BUSY de la piste originelle, qui ne doit
pas etre vue dans les recherches de raccordement suivantes */
ii = NbPtNewTrack; pt_track = NewTrack;
for ( ; ii > 0; ii --, pt_track = (TRACK*) pt_track->Pnext)
{
pt_track->SetState(BUSY, ON);
}
/* Detection du nouveau net_code */
ii = NbPtNewTrack; pt_track = NewTrack;
for ( ; ii > 0; ii --, pt_track = (TRACK*) pt_track->Pnext)
{
pt_track->net_code = 0;
}
new_net_code = 0;
ii = 0; pt_track = NewTrack;
for( ; ii < NbPtNewTrack ; ii++, pt_track = (TRACK*)pt_track->Pnext)
{
/* Localisation de la pastille ou segment en debut de segment: */
masquelayer = tab_layer[pt_track->Layer];
LockPoint = LocateLockPoint(pt_track->m_Start.x,pt_track->m_Start.y,masquelayer);
if( LockPoint )
{
if ( LockPoint->m_StructType == TYPEPAD )
{
pt_pad = (D_PAD*) LockPoint;
new_net_code = pt_pad->net_code;
if ( new_net_code > 0 ) break;
}
else /* debut de piste sur un segment de piste */
{
Track = (TRACK *) LockPoint;
new_net_code = Track->net_code;
if ( new_net_code > 0 ) break;
}
}
LockPoint = LocateLockPoint(pt_track->m_End.x,pt_track->m_End.y,masquelayer);
if( LockPoint )
{
if ( LockPoint->m_StructType == TYPEPAD )
{
pt_pad = (D_PAD*) LockPoint;
new_net_code = pt_pad->net_code;
if ( new_net_code > 0 ) break;
}
else /* debut de piste sur un segment de piste */
{
Track = (TRACK *) LockPoint;
new_net_code = Track->net_code;
if ( new_net_code > 0 ) break;
}
}
}
/* Mise a jour du nouveau net code de la piste */
ii = 0; pt_track = NewTrack;
for( ; ii < NbPtNewTrack; ii++, pt_track = (TRACK*)pt_track->Pnext)
{
pt_track->net_code = new_net_code;
}
/* Controle DRC de la nouvelle piste */
ii = 0; pt_track = NewTrack;
for( ; ii < NbPtNewTrack; ii++, pt_track = pt_track->Next() )
{
if( Drc_On == RUN )
if( drc(DC, pt_track, pt_pcb->Track, 1) == BAD_DRC )
{
if( confirmation(" Erreur DRC, Place piste:") == YES ) continue;
else { DRC_error = 1; break; }
}
}
if( DRC_error == 0)
{
if(FlagState == MOVE_ROUTE)
{
/* copie nouvelle piste */
pt_track = NewTrack;
NewTrack = pt_track->Copy(NbPtNewTrack);
/* effacement ancienne ( chainage et liens mauvais */
ii = NbPtNewTrack;
for ( ; ii > 0; ii --, pt_track = NextS)
{
NextS = (TRACK*) pt_track->Pnext;
DeleteStructure(pt_track);
}
test_1_net_connexion(DC, old_net_code );
}
pt_classe = NewTrack->GetBestInsertPoint();
NewTrack->Insert(pt_classe);
Trace_Une_Piste(DC, NewTrack,NbPtNewTrack,GR_OR) ;
/* Mise a jour des connexions sur pads et sur pistes */
ii = 0; pt_track = NewTrack;
for( ; ii < NbPtNewTrack; ii++, pt_track = NextS)
{
NextS = (TRACK*)pt_track->Pnext;
pt_track->SetState(BEGIN_ONPAD|END_ONPAD, OFF);
masquelayer = tab_layer[pt_track->Layer];
/* Localisation de la pastille ou segment sur debut segment: */
LockPoint = LocateLockPoint(pt_track->m_Start.x,pt_track->m_Start.y,masquelayer);
if( LockPoint )
{
pt_track->start = LockPoint;
if ( LockPoint->m_StructType == TYPEPAD )
{ /* fin de piste sur un pad */
pt_pad = (D_PAD*) LockPoint;
pt_track->SetState(BEGIN_ONPAD, ON);
}
else /* debut de piste sur un segment de piste */
{
Track = (TRACK *) LockPoint;
CreateLockPoint(&pt_track->m_Start.x,&pt_track->m_Start.y,Track,pt_track);
}
}
/* Localisation de la pastille ou segment sur fin de segment: */
LockPoint = LocateLockPoint(pt_track->m_End.x,pt_track->m_End.y,masquelayer);
if( LockPoint )
{
pt_track->end = LockPoint;
if ( LockPoint->m_StructType == TYPEPAD )
{ /* fin de piste sur un pad */
pt_pad = (D_PAD*) LockPoint;
pt_track->SetState(END_ONPAD, ON);
}
else /* debut de piste sur un segment de piste */
{
Track = (TRACK *) LockPoint;
CreateLockPoint(&pt_track->m_Start.x,&pt_track->m_Start.y,Track,pt_track);
}
}
}
/* Suppression du flag BUSY */
ii = NbPtNewTrack; pt_track = NewTrack;
for ( ; ii > 0; ii --, pt_track = (TRACK*) pt_track->Pnext)
{
pt_track->SetState(BUSY, OFF);
}
test_1_net_connexion(DC, new_net_code );
ActiveScreen->SetModify();
}
else /* Erreur DRC: Annulation commande */
{
DisplayOpt.DisplayPcbTrackFill = SKETCH ;
Trace_Une_Piste(DC, NewTrack,NbPtNewTrack,GR_XOR);
DisplayOpt.DisplayPcbTrackFill = Track_fill_copy ;
if(FlagState == MOVE_ROUTE)
{ /* Remise en position de la piste deplacee */
Track = NewTrack;
PosInitX -= Track->m_Start.x; PosInitY -= Track->m_Start.y;
for( ii = 0; ii < NbPtNewTrack; ii++, Track = (TRACK*) Track->Pnext)
{
if( Track == NULL ) break;
Track->m_Start.x += PosInitX; Track->m_Start.y += PosInitY;
Track->m_End.x += PosInitX; Track->m_End.y += PosInitY;
Track->SetState(BUSY,OFF);
}
Trace_Une_Piste(DC, NewTrack,NbPtNewTrack,GR_OR);
}
if (FlagState == COPY_ROUTE )
{ /* Suppression copie */
for( ii = 0; ii < NbPtNewTrack; NewTrack = NextS)
{
if(NewTrack == NULL) break;
NextS = (TRACK*) NewTrack->Pnext;
delete NewTrack;
}
}
}
NewTrack = NULL;
Affiche_Infos_Status_Pcb(Cmd);
if(Etat_Surbrillance) Hight_Light(DC);
}
/************************************************/
void WinEDA_PcbFrame::Start_CopieMove_Route(TRACK * track, wxDC * DC, bool Drag)
/************************************************/
/* Routine permettant la recopie d'une piste (suite de segments) deja tracee
*/
{
int ii;
TRACK *pt_segm, *pt_track;
int masquelayer = tab_layer[ActiveScreen->Active_Layer];
wxDC * DC = Cmd->DC;
if( NewTrack ) return;
FlagState = (int)Cmd->Menu->param_inf;
/* Recherche de la piste sur la couche active (non zone) */
for(pt_segm = pt_pcb->Track; pt_segm != NULL; pt_segm = (TRACK*)pt_segm->Pnext)
{
pt_segm = Locate_Pistes(pt_segm,masquelayer, CURSEUR_OFF_GRILLE);
if( pt_segm == NULL ) break ;
break ;
}
if( pt_segm != NULL )
{
if (FlagState == COPY_ROUTE )
pt_track = Marque_Une_Piste(DC, pt_segm, &NbPtNewTrack, 0);
else pt_track = Marque_Une_Piste(DC, pt_segm, &NbPtNewTrack, GR_XOR);
if(NbPtNewTrack) /* Il y a NbPtNewTrack segments de piste a traiter */
{
/* effacement du flag BUSY de la piste originelle */
ii = NbPtNewTrack; pt_segm = pt_track;
for ( ; ii > 0; ii --, pt_segm = (TRACK*) pt_segm->Pnext)
{
pt_segm->SetState(BUSY, OFF);
}
if (FlagState == COPY_ROUTE )
NewTrack = pt_track->Copy(NbPtNewTrack);
else NewTrack = pt_track;
Affiche_Infos_Piste(Cmd, pt_track) ;
startX = ActiveScreen->Curseur_X;
startY = ActiveScreen->Curseur_Y;
Place_Dupl_Route_Item.State = WAIT;
ActiveDrawPanel->ManageCurseur = Show_Move_Piste;
DisplayOpt.DisplayPcbTrackFill = SKETCH ;
Trace_Une_Piste(DC, NewTrack,NbPtNewTrack,GR_XOR) ;
DisplayOpt.DisplayPcbTrackFill = Track_fill_copy ;
PosInitX = NewTrack->m_Start.x; PosInitY = NewTrack->m_Start.y;
}
}
}
#endif
/************************************************************************/
EDA_BaseStruct * LocateLockPoint(BOARD * Pcb, wxPoint pos, int LayerMask)
/************************************************************************/
/* Routine trouvant le point " d'accrochage " d'une extremite de piste.
Ce point peut etre un PAD ou un autre segment de piste
Retourne:
- pointeur sur ce PAD ou:
- pointeur sur le segment ou:
- NULL
Parametres d'appel:
coord pX, pY du point tst
masque des couches a tester
*/
{
D_PAD * pt_pad;
TRACK * ptsegm;
MODULE * Module;
/* detection du point type PAD */
pt_pad = NULL;
Module = Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*)Module->Pnext )
{
pt_pad = Locate_Pads(Module, pos, LayerMask);
if (pt_pad) return(pt_pad);
}
/* ici aucun pad n'a ete localise: detection d'un segment de piste */
ptsegm = Fast_Locate_Piste( Pcb->m_Track, NULL, pos, LayerMask);
if( ptsegm == NULL )
ptsegm = Locate_Pistes( Pcb->m_Track, pos, LayerMask);
return(ptsegm);
}
/******************************************************************************/
TRACK * CreateLockPoint(int *pX, int *pY, TRACK * ptsegm, TRACK * refsegm)
/******************************************************************************/
/* Routine de creation d'un point intermediaire sur un segment
le segment ptsegm est casse en 2 segments se raccordant au point pX, pY
retourne:
NULL si pas de nouveau point ( c.a.d si pX, pY correspondait deja
a une extremite ou:
pointeur sur le segment cree
si refsegm != NULL refsegm est pointeur sur le segment incident,
et le point cree est l'intersection des 2 axes des segments ptsegm et
refsegm
retourne la valeur exacte de pX et pY
Si ptsegm pointe sur une via:
retourne la valeur exacte de pX et pY et ptsegm,
mais ne cree pas de point supplementaire
*/
{
int cX, cY;
int dx, dy; /* Coord de l'extremite du segm ptsegm / origine */
int ox, oy, fx , fy; /* coord de refsegm / origine de prsegm */
TRACK * NewTrack;
if( (ptsegm->m_Start.x == *pX) && (ptsegm->m_Start.y == *pY) ) return(NULL);
if( (ptsegm->m_End.x == *pX) && (ptsegm->m_End.y == *pY) ) return(NULL);
/* le point n'est pas sur une extremite de piste */
if(ptsegm->m_StructType == TYPEVIA )
{
*pX = ptsegm->m_Start.x; *pY = ptsegm->m_Start.y;
return(ptsegm);
}
/* calcul des coord vraies du point intermediaire dans le repere d'origine
= origine de ptsegm */
cX = *pX - ptsegm->m_Start.x;
cY = *pY - ptsegm->m_Start.y;
dx = ptsegm->m_End.x - ptsegm->m_Start.x;
dy = ptsegm->m_End.y - ptsegm->m_Start.y;
// ***** A COMPLETER : non utilise
if ( refsegm )
{
ox = refsegm->m_Start.x - ptsegm->m_Start.x;
oy = refsegm->m_Start.y - ptsegm->m_Start.y;
fx = refsegm->m_End.x - ptsegm->m_Start.x;
fy = refsegm->m_End.y - ptsegm->m_Start.y;
}
/* pour que le point soit sur le segment ptsegm: cY/cX = dy/dx */
if ( dx == 0 ) cX = 0; /* segm horizontal */
else cY = (cX * dy) / dx;
/* creation du point intermediaire ( c'est a dire creation d'un nouveau
segment, debutant au point intermediaire */
cX += ptsegm->m_Start.x; cY += ptsegm->m_Start.y;
NewTrack = ptsegm->Copy();
NewTrack->Insert(NULL, ptsegm);
/* correction du pointeur de fin du nouveau segment */
NewTrack->end = ptsegm->end;
/* le segment primitif finit au nouveau point : */
ptsegm->m_End.x = cX; ptsegm->m_End.y = cY;
ptsegm->SetState(END_ONPAD, OFF);
/* le nouveau segment debute au nouveau point : */
ptsegm = NewTrack;;
ptsegm->m_Start.x = cX; ptsegm->m_Start.y = cY;
ptsegm->SetState(BEGIN_ONPAD, OFF);
*pX = cX; *pY = cY;
return(ptsegm);
}