kicad/pcbnew/protos.h

383 lines
12 KiB
C++

/***********/
/* protos.h */
/***********/
#ifndef PROTO_H
#define PROTO_H
#include <vector>
class COMMAND;
/** Function SwapData
* Used in undo / redo command:
* swap data between Item and a copy
* swapped data is data modified by edition, so NOT ALL values are swapped
* @param aItem = the item
* @param aImage = a copy of the item
*/
void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage );
/* install function for DialogNonCopperZonesEditor dialog frame :*/
bool InstallDialogNonCopperZonesEditor( WinEDA_PcbFrame* aParent,
ZONE_CONTAINER* aZone );
/*******************/
/* PAD_CONNECT.CPP */
/*******************/
class D_PAD;
/**
* Function CreateSortedPadListByXCoord
* first empties then fills the vector with all pads and sorts them by
* increasing x coordinate. The vector only holds pointers to the pads and
* those pointers are only references to pads which are owned by the BOARD
* through other links.
* @param aBoard Which board to gather pads from.
* @param aVector Where to put the pad pointers.
*/
void CreateSortedPadListByXCoord( BOARD* aBoard, std::vector<D_PAD*>* aVector );
/* Create a sorted list of pointers to pads.
* This list is sorted by X coordinate value.
* The list must be freed bu user
*/
/**************/
/* PCBCFG.CPP */
/**************/
bool Read_Hotkey_Config( WinEDA_DrawFrame* frame, bool verbose );
/***************/
/* TRPISTE.CPP */
/***************/
/* Routine trace of n consecutive segments in memory.
* Useful for mounting a track record for being the segments that
* Tracks are contiguous in memory
* Parameters:
* Pt_start_piste = starting address of the list of segments
* Nbsegment = number of segments was traced
* Mode_color = mode (GrXOR, Gror ..)
* CAUTION:
* The starting point of a track following MUST exist: may be
* Then put a 0 before calling a routine if the track is the last draw
*/
void Trace_Une_Piste( WinEDA_DrawPanel* panel,
wxDC* DC,
TRACK* pt_start_piste,
int nbsegment,
int mode_color );
/****************/
/* LOCATE.CPP : */
/****************/
/* Find a pad by it's name om the module. */
TRACK* Locate_Via( BOARD* Pcb, const wxPoint& pos, int layer = -1 );
/**
* Function Locate_Via_Area
* finds the first SEGVIA which covers the given aPos with a matching layer.
* @param aStart The starting TRACK or SEGVIA in the BOARD's list.
* @param aPos The wxPoint to HitTest() against.
* @param aLayer The layer to match, pass -1 for a don't care.
* @return TRACK* - actually a SEGVIA* if found, else NULL.
*/
TRACK* Locate_Via_Area( TRACK* aStart,
const wxPoint& aPos,
int aLayer = -1 );
/* Locates the center through the point x, y, on layer data
* by masquelayer.
* Search is done to address start_adr has end_adr (not included)
*/
TRACK* Fast_Locate_Via( TRACK* start_adr, TRACK* end_adr,
const wxPoint& pos, int masquelayer );
/* Locates the center through the point x, y, on layer data
* by masquelayer.
* Search is done to address start_adr has end_adr (not included)
*/
TRACK* Fast_Locate_Piste( TRACK* start_adr, TRACK* end_adr,
const wxPoint& ref_pos, int masquelayer );
/* Search for segment connected to the segment edge by
* Ptr_piste:
* If int = START, the point of beginning of the segment is used
* If int = END, the end point of the segment is used
* The search is done only on the ends of segments
* The search is limited to the area [... pt_base] pt_lim.
*/
TRACK* Locate_Piste_Connectee( TRACK* ptr_piste, TRACK* pt_base,
TRACK* pt_lim, int extr );
/*
* 1 - Locate segment of track leading from the mouse.
* 2 - Locate segment of track point by point.
* Ref_pX, ref_pY.
*
* If layer <0 the layer is not tested.
*
* The search begins to address start_adresse
*/
TRACK* Locate_Pistes( BOARD* aPcb, TRACK* start_adresse, int layer, int typeloc );
TRACK* Locate_Pistes( BOARD* aPcb, TRACK* start_adresse,
const wxPoint& ref_pos, int layer );
/* Locate pad connected to the beginning or end of a segment
* Input: pointer to the segment, and flag = START or END
* Returns:
* A pointer to the description of the patch if pad was found.
* NULL pointer if pad was not found.
*/
D_PAD* Locate_Pad_Connecte( BOARD* aPcb, TRACK* ptr_segment, int extr );
/*
* Locate pad pointed to by the coordinate ref_pX,, ref_pY or the current
* cursor position, search done on all tracks.
* Entry:
* - Mouse coord (Curseur_X and Curseur_Y)
* Or ref_pX, ref_pY
* Returns:
* Pointer to the pad if found
* NULL pointer if pad not found
*/
D_PAD* Locate_Any_Pad( BOARD* aPcb,
int typeloc,
bool OnlyCurrentLayer = FALSE );
D_PAD* Locate_Any_Pad( BOARD* aPcb,
const wxPoint& ref_pos,
bool OnlyCurrentLayer = FALSE );
/* Locate pad pointed to by the coordinate ref_pX,, ref_pY or the cursor
* position of the current footprint.
* Input:
* - The module to search.
* - Layer to search or -1 to search all layers.
* Returns:
* A pointer to the pad if found otherwise NULL.
*/
D_PAD* Locate_Pads( MODULE* Module, int layer, int typeloc );
D_PAD* Locate_Pads( MODULE* Module, const wxPoint& ref_pos, int layer );
/* Locate a footprint by its bounding rectangle. */
MODULE* Locate_Prefered_Module( BOARD* Pcb, int typeloc );
/* Locate a pad pointed to by the cursor on the footprint.
* Module.
* Input:
* - Module to search.
* Returns:
* A pointer to the pad if found otherwise NULL.
*/
D_PAD* Locate_Pads( MODULE* Module, int typeloc );
/* Locate a trace segment at the current cursor position.
* The search begins to address start_adresse.
*/
TRACK* Locate_Pistes( TRACK* start_adresse, int typeloc );
DRAWSEGMENT* Locate_Segment_Pcb( BOARD* Pcb, int LayerSearch, int typeloc );
/* Locate pad containing the point px, py, layer on layer.
*
* The list of pads must already exist.
*
* Returns:
* Pointer to the pad if found, otherwise NULL.
*/
D_PAD* Fast_Locate_Pad_Connecte( BOARD* Pcb,
const wxPoint& ref_pos,
int layer );
/*
* 1 - Locate trace segment at the current cursor position.
* 2 - Locate trace segment at the given coordinates ref_pos.
*
* If layer == -1, check all layers.
*
* The search begins to address start_adresse
*/
TRACK* Locate_Zone( TRACK* start_adresse, int layer, int typeloc );
TRACK* Locate_Zone( TRACK* start_adresse,
const wxPoint& ref_pos,
int layer );
/*************/
/* MODULES.C */
/*************/
int ChangeSideNumLayer( int oldlayer );
void DrawModuleOutlines( WinEDA_DrawPanel* panel, wxDC* DC, MODULE* module );
void Montre_Position_Empreinte( WinEDA_DrawPanel* panel,
wxDC* DC,
bool erase );
/* LOADCMP.C : */
MODULE* Load_Module_From_Library( WinEDA_DrawFrame* frame, wxDC* DC );
/****************/
/* EDITRACK.C : */
/****************/
TRACK* LocateIntrusion( TRACK* listStart, TRACK* aTrack );
void ShowNewTrackWhenMovingCursor( WinEDA_DrawPanel* panel,
wxDC* DC, bool erase );
/* Determine coordinate for a segment direction of 0, 90 or 45 degrees,
* depending on it's position from the origin (ox, oy) and the current
* cursor position.
*/
void Calcule_Coord_Extremite_45( int ox, int oy, int* fx, int* fy );
/*****************/
/* TRACK.CPP : */
/*****************/
/**
* Function Marque_Une_Piste
* marks a chain of track segments, connected to aTrackList.
* Each segment is marked by setting the BUSY bit into m_Flags. Electrical
* continuity is detected by walking each segment, and finally the segments
* are rearranged into a contiguous chain within the given list.
*
* @param aPcb = the board to analyze
* @param aStartSegm - The first interesting segment within a list of track
* segment of aPcb
* @param aSegmCount = a pointer to an integer where to return the number of
* interesting segments
* @param aTrackLen = a pointer to an integer where to return the lenght of the
* track
* @param aReorder = true for reorder the interesting segments (useful for
* track edition/deletion) in this case the flag BUSY is
* set (the user is responsible of flag clearing). False
* for no reorder : useful when we want just calculate the
* track length in this case, flags are reset
* @return TRACK* the first in the chain of interesting segments.
*/
TRACK* Marque_Une_Piste( BOARD* aPcb,
TRACK* aStartSegm,
int* aSegmCount,
int* aTrackLen,
bool aReorder );
/* Calculate end coordinate of a trace.
* Returns 1 if OK, 0 if trace looped back on itself.
* The coord are returned StartTrack-> ox, oy
* And EndTrack-> fx, fy if OK
* The segments are drawn consecutively.
*/
int ReturnEndsTrack( TRACK* RefTrack, int NbSegm,
TRACK** StartTrack, TRACK** EndTrack );
/* Update the state of a list of structures. */
void ListSetState( EDA_BaseStruct* Start, int Nbitem, int State, int onoff );
/**************/
/* CLEAN.CPP : */
/**************/
/* Remove segments connected incorrectly.
*/
int Netliste_Controle_piste( WinEDA_PcbFrame* frame, wxDC* DC, int affiche );
/************/
/* ZONES.CPP */
/************/
int Propagation( WinEDA_PcbFrame* frame );
/****************/
/* ATTRIBUT.CPP */
/****************/
/* Compute the attributes that are 0 (masque_clr) and put a 1
* (Masque_set), depending on the options attribute.
*
* These attributes are normally the member flags of the structure TRACK
* Pointers NULLs are accepted.
*/
void MasqueAttributs( int* masque_set, int* masque_clr );
/***************/
/* DUPLTRAC.CPP */
/***************/
/* Routine to find the point "attachment" at the end of a trace.
* This may be a PAD or another trace segment.
* Returns:
* - Pointer to the PAD or:
* - Pointer to the segment or:
* - NULL
* Parameters:
* - aPos - coordinate point test
* ALayerMask of mask layers to be tested
*/
BOARD_ITEM* LocateLockPoint( BOARD* aPcb, wxPoint aPos, int aLayerMask );
/* Create an intermediate point on a segment
* aSegm segment is broken into 2 segments connecting point pX, pY
* After insertion:
* The new segment starts from to new point, and ends to initial aSegm ending point
* the old segment aSegm ends to new point
* Returns:
* NULL if no new point (ie if aRefPoint already corresponded at one end of aSegm
* or
* Pointer to the segment created
* Returns the exact value of aRefPoint
* If aSegm points to a via:
* Returns the exact value of aRefPoint and a pointer to the via,
* But does not create extra point
*/
TRACK* CreateLockPoint( BOARD* aPcb,
wxPoint& aRefPoint,
TRACK* aSegm,
PICKED_ITEMS_LIST* aItemsListPicker );
/****************/
/* CONTROLE.CPP */
/****************/
void RemoteCommand( const char* cmdline );
bool Project( wxPoint* res, wxPoint on_grid, const TRACK* track );
/***************/
/* AUTOROUT.CPP */
/***************/
void DisplayBoard( WinEDA_DrawPanel* panel, wxDC* DC ); /* for Debugging */
/**************/
/* NETLIST.CPP */
/**************/
/* List the names of the modules of PCB
* Returns a pointer to the module selected or NULL if no selection.
*/
MODULE* ListAndSelectModuleName( COMMAND* Cmd );
/***************************/
/* DIALOG_LAYERS_SETUP.CPP */
/***************************/
void DisplayDialogLayerSetup( WinEDA_PcbFrame* parent );
#endif /* #define PROTO_H */