kicad/gerbview/dcode.cpp

482 lines
14 KiB
C++

/********************************************************/
/**** Routine de lecture et visu d'un fichier GERBER ****/
/********************************************************/
#include "fctsys.h"
#include "common.h"
#include "gerbview.h"
#include "pcbplot.h"
#include "protos.h"
#define DEFAULT_SIZE 100
/* Format Gerber : NOTES :
Fonctions preparatoires:
Gn =
G01 interpolation lineaire ( trace de droites )
G02,G20,G21 Interpolation circulaire , sens trigo < 0
G03,G30,G31 Interpolation circulaire , sens trigo > 0
G04 commentaire
G06 Interpolation parabolique
G07 Interpolation cubique
G10 interpolation lineaire ( echelle 10x )
G11 interpolation lineaire ( echelle 0.1x )
G12 interpolation lineaire ( echelle 0.01x )
G52 plot symbole reference par Dnn code
G53 plot symbole reference par Dnn ; symbole tourne de -90 degres
G54 Selection d'outil
G55 Mode exposition photo
G56 plot symbole reference par Dnn A code
G57 affiche le symbole reference sur la console
G58 plot et affiche le symbole reference sur la console
G60 interpolation lineaire ( echelle 100x )
G70 Unites = Inches
G71 Unites = Millimetres
G74 supprime interpolation circulaire sur 360 degre, revient a G01
G75 Active interpolation circulaire sur 360 degre
G90 Mode Coordonnees absolues
G91 Mode Coordonnees Relatives
Coordonnees X,Y
X,Y sont suivies de + ou - et de m+n chiffres (non separes)
m = partie entiere
n = partie apres la virgule
formats classiques : m = 2, n = 3 (format 2.3)
m = 3, n = 4 (format 3.4)
ex:
G__ X00345Y-06123 D__*
Outils et D_CODES
numero d'outil ( identification des formes )
1 a 99 (classique)
1 a 999
D_CODES:
D01 ... D9 = codes d'action:
D01 = activation de lumiere (baisser de plume) lors du déplacement
D02 = extinction de lumiere (lever de plume) lors du déplacement
D03 = Flash
D09 = VAPE Flash
D10 ... = Indentification d'outils ( d'ouvertures )
*/
/*********************************/
/* class GERBER_Descr : Methodes */
/*********************************/
GERBER_Descr::GERBER_Descr(int layer)
{
int ii;
m_Layer = layer; // Layer Number
m_Selected_Tool = FIRST_DCODE;
ResetDefaultValues();
for ( ii = 0; ii <= MAX_TOOLS; ii++ )
m_Aperture_List[ii] = new D_CODE(ii + FIRST_DCODE);
}
GERBER_Descr::~GERBER_Descr(void)
{
int ii;
if (m_Aperture_List )
{
for ( ii = 0; ii < MAX_TOOLS; ii++)
{
delete m_Aperture_List[ii];
m_Aperture_List[ii] = NULL;
}
}
}
/******************************************/
void GERBER_Descr::ResetDefaultValues(void)
/******************************************/
{
m_Parent = NULL;
m_Pback = NULL;
m_Pnext = NULL;
m_FileName.Empty();
m_Name = wxT("no name"); // Layer name
m_LayerNegative = FALSE; // TRUE = Negative Layer
m_ImageNegative = FALSE; // TRUE = Negative image
m_GerbMetric = FALSE; // FALSE = Inches, TRUE = metric
m_Relative = FALSE; // FALSE = absolute Coord, RUE = relative Coord
m_NoTrailingZeros = FALSE; // True: zeros a droite supprimés
m_MirorA = FALSE; // True: miror / axe A (X)
m_MirorB = FALSE; // True: miror / axe B (Y)
m_As_DCode = FALSE; // TRUE = DCodes in file (FALSE = no DCode->
// separate DCode file
m_Offset.x = m_Offset.y = 0; // Coord Offset
m_FmtScale.x = m_FmtScale.y = g_Default_GERBER_Format % 10;
m_FmtLen.x = m_FmtLen.y = m_FmtScale.x + (g_Default_GERBER_Format / 10);
m_LayerScale.x = m_LayerScale.y = 1.0; // scale (X et Y) pour cette layer
m_Rotation = 0;
m_Iterpolation = GERB_INTERPOL_LINEAR_1X; // Linear, 90 arc, Circ.
m_360Arc_enbl = FALSE; // 360 deg circular interpolation disable
m_Current_Tool = 0; // Current Tool (Dcode) number selected
m_CommandState = 0; // donne l'etat de l'analyse des commandes gerber
m_CurrentPos.x = m_CurrentPos.y = 0; // current specified coord for plot
m_PreviousPos.x = m_PreviousPos.y = 0; // old current specified coord for plot
m_IJPos.x = m_IJPos.y = 0; // current centre coord for plot arcs & circles
m_Current_File = NULL; // File to read
m_FilesPtr = 0;
m_Transform[0][0] = m_Transform[1][1] = 1;
m_Transform[0][1] = m_Transform[1][0] = 0; // Rotation/mirror = Normal
m_PolygonFillMode = FALSE;
m_PolygonFillModeState = 0;
}
/********************************************/
int GERBER_Descr::ReturnUsedDcodeNumber(void)
/********************************************/
{
int ii, jj;
jj = 0;
if (m_Aperture_List )
{
for ( ii = 0; ii < MAX_TOOLS; ii++)
{
if( m_Aperture_List[ii]->m_InUse || m_Aperture_List[ii]->m_Defined )
jj++;
}
}
return jj;
}
/******************************/
void GERBER_Descr::InitToolTable(void)
/******************************/
/* Creation du tableau des MAX_TOOLS DCodes utilisables, si il n'existe pas,
et Init des DCodes à une valeur raisonnable
*/
{
int count;
/* Init du buffer des D_CODES a des valeurs raisonnables */
for (count = 0 ; count < MAX_TOOLS ; count++)
{
if (m_Aperture_List[count] == NULL ) continue;
m_Aperture_List[count]->m_Num_Dcode = count + FIRST_DCODE;
m_Aperture_List[count]->Clear_D_CODE_Data();
}
}
/*************************/
/* Class DCODE: methodes */
/*************************/
/* Variables locales : */
/* Routines Locales */
D_CODE::D_CODE(int num_dcode)
{
m_Num_Dcode = num_dcode;
Clear_D_CODE_Data();
}
D_CODE::~D_CODE(void)
{
}
void D_CODE::Clear_D_CODE_Data(void)
{
m_Size.x = DEFAULT_SIZE;
m_Size.y = DEFAULT_SIZE;
m_Shape= GERB_CIRCLE;
m_Drill.x = m_Drill.y = 0;
m_DrillShape = 0;
m_InUse = FALSE;
m_Defined = FALSE;
}
/******************************************************************************/
int WinEDA_GerberFrame::Read_D_Code_File( const wxString & D_Code_FullFileName)
/******************************************************************************/
/* Routine de Lecture d'un fichier de D Codes.
Accepte format standard ou ALSPCB
un ';' demarre un commentaire.
Format Standard:
tool, Horiz, Vert, drill, vitesse, acc. ,Type ; [DCODE (commentaire)]
ex: 1, 12, 12, 0, 0, 0, 3 ; D10
Format:
Ver , Hor , Type , Tool [,Drill]
ex: 0.012, 0.012, L , D10
Classe les caract en buf_tmp sous forme de tableau de structures D_CODE.
Retourne:
< 0 si erreur:
-1 = Fichier non trouve
-2 = Erreur lecture fichier
0 si pas de nom de fichier (inits seules)
1 si OK
*/
{
int current_Dcode, ii, dcode_scale;
char* ptcar;
int dimH, dimV, drill, type_outil, dummy;
float fdimH, fdimV, fdrill;
char c_type_outil[256];
char Line[1024];
wxString msg;
D_CODE * pt_Dcode;
FILE * dest;
int layer = GetScreen()->m_Active_Layer;
D_CODE ** ListeDCode;
if ( g_GERBER_Descr_List[layer] == NULL )
{
g_GERBER_Descr_List[layer] = new GERBER_Descr(layer);
}
/* Mise a jour de l'echelle gerber : */
dcode_scale = 10; /* ici unit dcode = mil, unit interne = 0.1 mil
-> 1 unite dcode = 10 unit PCB */
current_Dcode = 0;
if ( D_Code_FullFileName.IsEmpty() ) return 0;
dest = wxFopen(D_Code_FullFileName, wxT("rt") );
if (dest == 0)
{
msg = _("File ") + D_Code_FullFileName + _(" not found");
DisplayError(this, msg, 10);
return -1;
}
g_GERBER_Descr_List[layer]->InitToolTable();
ListeDCode = g_GERBER_Descr_List[layer]->m_Aperture_List;
while( fgets(Line,255,dest) != NULL)
{
if (*Line == ';') continue; /* Commentaire */
if (strlen(Line) < 10 ) continue ; /* Probablemant ligne vide */
pt_Dcode = NULL; current_Dcode = 0;
/* Determination du type de fichier D_Code */
ptcar = Line ; ii = 0 ;
while( *ptcar ) if (*(ptcar++) == ',') ii++ ;
if (ii >= 6 ) /* valeurs en mils */
{
sscanf(Line,"%d,%d,%d,%d,%d,%d,%d",&ii,
&dimH, &dimV, &drill,
&dummy,&dummy,
&type_outil);
dimH = (int)( (dimH * dcode_scale) + 0.5) ;
dimV = (int)( (dimV * dcode_scale) + 0.5) ;
drill = (int)( (drill * dcode_scale) + 0.5);
if ( ii < 1 ) ii = 1;
current_Dcode = ii-1 + FIRST_DCODE;
}
else /* valeurs en inches a convertir en mils */
{
fdrill = 0 ; current_Dcode = 0 ; fdrill = 0 ;
sscanf(Line,"%f,%f,%1s",&fdimV, &fdimH, c_type_outil);
ptcar = Line ;
while( *ptcar )
{
if (*ptcar == 'D')
{
sscanf(ptcar+1,"%d,%f", &current_Dcode,&fdrill); break ;
}
else ptcar++ ;
}
dimH = (int)( (fdimH * dcode_scale * 1000) + 0.5);
dimV = (int)( (fdimV * dcode_scale * 1000) + 0.5);
drill = (int)( (fdrill * dcode_scale * 1000) + 0.5);
type_outil = -1 ;
if(c_type_outil[0] == 'L') type_outil = GERB_LINE;
if(c_type_outil[0] == 'R') type_outil = GERB_RECT;
if(c_type_outil[0] == 'C') type_outil = GERB_CIRCLE;
if(c_type_outil[0] == 'O') type_outil = GERB_OVALE;
if(type_outil == -1) {fclose(dest); return(-2);}
}
/* Mise a jour de la liste des d_codes si valeurs lues coherentes*/
if (current_Dcode < FIRST_DCODE ) continue;
if (current_Dcode >= MAX_TOOLS ) continue;
pt_Dcode = ReturnToolDescr(layer, current_Dcode);
pt_Dcode->m_Size.x = dimH;
pt_Dcode->m_Size.y = dimV;
pt_Dcode->m_Shape = type_outil;
pt_Dcode->m_Drill.x = pt_Dcode->m_Drill.y = drill;
pt_Dcode->m_Defined = TRUE;
}
fclose(dest) ;
return(1);
}
/***************************************************/
void WinEDA_GerberFrame::CopyDCodesSizeToItems(void)
/***************************************************/
/* Set Size Items (Lines, Flashes) from DCodes List
*/
{
TRACK * track;
D_CODE * pt_Dcode; /* Pointeur sur le D code*/
track = m_Pcb->m_Track;
for ( ; track != NULL ; track = (TRACK*) track->Pnext )
{
pt_Dcode = ReturnToolDescr(track->m_Layer, track->m_NetCode);
pt_Dcode->m_InUse = TRUE;
if ( // Line Item
(track->m_Shape == S_SEGMENT ) || /* segment rectiligne */
(track->m_Shape == S_RECT ) || /* segment forme rect (i.e. bouts non arrondis) */
(track->m_Shape == S_ARC ) || /* segment en arc de cercle (bouts arrondis)*/
(track->m_Shape == S_CIRCLE ) || /* segment en cercle (anneau)*/
(track->m_Shape == S_ARC_RECT ) /* segment en arc de cercle (bouts droits) (GERBER)*/
)
{
track->m_Width = pt_Dcode->m_Size.x;
}
else // Spots ( Flashed Items )
{
int width, len;
wxSize size = pt_Dcode->m_Size;
width = min( size.x, size.y );
len = max( size.x, size.y ) - width;
track->m_Width = width;
track->m_Start.x = (track->m_Start.x + track->m_End.x) / 2;
track->m_Start.y = (track->m_Start.y + track->m_End.y) / 2;
track->m_End = track->m_Start; // m_Start = m_End = Spot center
switch (pt_Dcode->m_Shape)
{
case GERB_LINE : // ne devrait pas etre utilisé ici
case GERB_CIRCLE : /* spot rond (for GERBER)*/
track->m_Shape = S_SPOT_CIRCLE;
break ;
case GERB_OVALE : /* spot ovale (for GERBER)*/
track->m_Shape = S_SPOT_OVALE;
break ;
default: /* spot rect (for GERBER)*/
track->m_Shape = S_SPOT_RECT;
break ;
}
len >>= 1;
if ( size.x > size.y )
{
track->m_Start.x -= len;
track->m_End.x += len;
}
else
{
track->m_Start.y -= len;
track->m_End.y += len;
}
}
}
}
/*********************************************************/
D_CODE * ReturnToolDescr(int layer, int Dcode, int * index)
/*********************************************************/
/* Retourne un pointeur sur la description de l'outil DCode de reference Dcode
(rappel : Dcode >= 10)
*/
{
GERBER_Descr * DcodeList = g_GERBER_Descr_List[layer];
D_CODE * pt_dcode = NULL;
if (index) *index = 0;
if ( DcodeList && Dcode >= FIRST_DCODE && Dcode < MAX_TOOLS)
{
pt_dcode = DcodeList->m_Aperture_List[Dcode - FIRST_DCODE];
if ( index ) *index = Dcode - FIRST_DCODE + 1;
}
return pt_dcode;
}
/************************************************/
void WinEDA_GerberFrame::Liste_D_Codes(wxDC * DC)
/************************************************/
{
int ii, jj;
D_CODE * pt_D_code ;
wxString Line;
WinEDA_TextFrame * List;
int scale = 10000;
int curr_layer = GetScreen()->m_Active_Layer;
int layer;
GERBER_Descr * DcodeList;
/* Construction de la liste des messages */
List = new WinEDA_TextFrame(this, _("List D-Codes"));
for (layer = 0; layer < 32; layer++ )
{
DcodeList = g_GERBER_Descr_List[layer];
if ( DcodeList == NULL ) continue;
if ( DcodeList->ReturnUsedDcodeNumber() == 0 )
continue;
if (layer == curr_layer )
Line.Printf( wxT("*** Active layer (%2.2d) ***"), layer+1);
else Line.Printf( wxT("*** layer %2.2d ***"), layer+1);
List->Append(Line);
for ( ii = 0, jj = 1 ; ii < MAX_TOOLS ; ii++ )
{
pt_D_code = DcodeList->m_Aperture_List[ii] ;
if ( pt_D_code == NULL ) continue;
if ( !pt_D_code->m_InUse && !pt_D_code->m_Defined ) continue;
Line.Printf( wxT(
"tool %2.2d: D%2.2d V %2.4f H %2.4f %s"),
jj,
pt_D_code->m_Num_Dcode,
(float)pt_D_code->m_Size.y /scale,
(float)pt_D_code->m_Size.x /scale,
g_GERBER_Tool_Type[pt_D_code->m_Shape] );
if ( ! pt_D_code->m_Defined ) Line += wxT(" ?");
if ( ! pt_D_code->m_InUse ) Line += wxT(" *");
List->Append(Line);
jj++;
}
}
ii = List->ShowModal(); List->Destroy();
if (ii < 0) return;
#if 0
// Mise en surbrillance des éléments correspondant au DCode sélectionné
if(Etat_Surbrillance) Hight_Light(DrawPanel, DC);
net_code_Surbrillance = (GetScreen()->m_Active_Layer<< 16) + ii;
Hight_Light(DrawPanel, DC);
#endif
}