kicad/eeschema/sch_text.h

521 lines
18 KiB
C++

/********************************************/
/* Definitions for the EESchema program: */
/********************************************/
#ifndef CLASS_TEXT_LABEL_H
#define CLASS_TEXT_LABEL_H
#include "macros.h"
#include "sch_item_struct.h"
class LINE_READER;
/* Type of SCH_HIERLABEL and SCH_GLOBALLABEL
* mainly used to handle the graphic associated shape
*/
typedef enum {
NET_INPUT,
NET_OUTPUT,
NET_BIDI,
NET_TRISTATE,
NET_UNSPECIFIED,
NET_TMAX /* Last value */
} TypeSheetLabel;
extern const char* SheetLabelType[]; /* names of types of labels */
class SCH_TEXT : public SCH_ITEM, public EDA_TEXT
{
public:
int m_Shape;
bool m_IsDangling; // true if not connected (used to draw the "not
// connected" symbol
protected:
int m_SchematicOrientation; /* orientation of texts (comments) and
* labels in schematic
* 0 = normal (horizontal, left
* justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified).
* This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the
* mirrored position of up
* this is perhaps a duplicate of m_Orient
* and m_HJustified or m_VJustified,
* but is more easy to handle that 3
* parameters in editions, Reading and
* Saving file
*/
public:
SCH_TEXT( const wxPoint& pos = wxPoint( 0, 0 ),
const wxString& text = wxEmptyString,
KICAD_T aType = SCH_TEXT_T );
SCH_TEXT( const SCH_TEXT& aText );
~SCH_TEXT() { }
virtual wxString GetClass() const
{
return wxT( "SCH_TEXT" );
}
/**
* Function IncrementLabel
* increments the label text.
*/
void IncrementLabel();
/**
* Function SetOrientation
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation (for a text )
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetOrientation( int aSchematicOrientation );
int GetOrientation() { return m_SchematicOrientation; }
/**
* Function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset() const;
SCH_TEXT* GenCopy();
virtual void Draw( EDA_DRAW_PANEL* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
/**
* Function CreateGraphicShape
* Calculates the graphic shape (a polygon) associated to the text
* @param aPoints = a buffer to fill with polygon corners coordinates
* @param Pos = Postion of the shape
* for texts and labels: do nothing
* Mainly for derived classes (SCH_SHEET_PIN and Hierarchical labels)
*/
virtual void CreateGraphicShape( std::vector <wxPoint>& aPoints, const wxPoint& Pos )
{
aPoints.clear();
}
void SwapData( SCH_TEXT* copyitem );
void Place( SCH_EDIT_FRAME* frame, wxDC* DC );
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_RECT GetBoundingBox() const;
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/**
* Load schematic text entry from \a aLine in a .sch file.
*
* @param aLine - Essentially this is file to read schematic text from.
* @param aErrorMsg - Description of the error if an error occurs while loading the
* schematic text.
* @return True if the schematic text loaded successfully.
*/
virtual bool Load( LINE_READER& aLine, wxString& aErrorMsg );
/**
* Function GetPenSize
* @return the size of the "pen" that be used to draw or plot this item
*/
int GetPenSize() const;
// Geometric transforms (used in block operations):
/** virtual function Move
* move item to a new position.
* @param aMoveVector = the displacement vector
*/
virtual void Move( const wxPoint& aMoveVector )
{
m_Pos += aMoveVector;
}
/**
* Function Mirror_Y
* mirrors the item relative to \a aYaxisPosition.
* @param aYaxis_position The y axis coordinate to mirror around.
*/
virtual void Mirror_Y( int aYaxis_position );
virtual void Rotate( wxPoint rotationPoint );
virtual void Mirror_X( int aXaxis_position );
/**
* Compare schematic text entry against search string.
*
* @param aSearchData - Criterial to search against.
* @param aAuxData - a pointer on auxiliary data, if needed. Can be null
* @param aFindLocation - a wxPoint where to put the location of matched item. can be NULL.
* @return True if this schematic text item matches the search criteria.
*/
virtual bool Matches( wxFindReplaceData& aSearchData, void* aAuxData, wxPoint* aFindLocation );
virtual void GetEndPoints( std::vector< DANGLING_END_ITEM >& aItemList );
virtual bool IsDanglingStateChanged( std::vector< DANGLING_END_ITEM >& aItemList );
virtual bool IsDangling() const { return m_IsDangling; }
virtual bool IsSelectStateChanged( const wxRect& aRect );
virtual void GetConnectionPoints( vector< wxPoint >& aPoints ) const;
virtual bool CanIncrementLabel() const { return true; }
virtual wxString GetSelectMenuText() const;
virtual const char** GetMenuImage() const { return (const char**) add_text_xpm; }
#if defined(DEBUG)
void Show( int nestLevel, std::ostream& os );
#endif
private:
virtual bool doHitTest( const wxPoint& aPoint, int aAccuracy ) const;
virtual bool doHitTest( const EDA_RECT& aRect, bool aContained, int aAccuracy ) const;
virtual EDA_ITEM* doClone() const;
virtual void doPlot( PLOTTER* aPlotter );
};
class SCH_LABEL : public SCH_TEXT
{
public:
SCH_LABEL( const wxPoint& pos = wxPoint( 0, 0 ), const wxString& text = wxEmptyString );
SCH_LABEL( const SCH_LABEL& aLabel );
~SCH_LABEL() { }
virtual void Draw( EDA_DRAW_PANEL* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
virtual wxString GetClass() const
{
return wxT( "SCH_LABEL" );
}
/**
* Function SetOrientation
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation (for a label)
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetOrientation( int aSchematicOrientation );
/**
* Function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset() const;
virtual void Mirror_X( int aXaxis_position );
virtual void Rotate( wxPoint rotationPoint );
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_RECT GetBoundingBox() const;
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/**
* Load schematic label entry from \a aLine in a .sch file.
*
* @param aLine - Essentially this is file to read schematic label from.
* @param aErrorMsg - Description of the error if an error occurs while loading the
* schematic label.
* @return True if the schematic label loaded successfully.
*/
virtual bool Load( LINE_READER& aLine, wxString& aErrorMsg );
virtual bool IsConnectable() const { return true; }
virtual wxString GetSelectMenuText() const;
virtual const char** GetMenuImage() const { return (const char**) add_line_label_xpm; }
private:
virtual bool doHitTest( const wxPoint& aPoint, int aAccuracy ) const;
virtual bool doIsConnected( const wxPoint& aPosition ) const { return m_Pos == aPosition; }
virtual EDA_ITEM* doClone() const;
};
class SCH_GLOBALLABEL : public SCH_TEXT
{
public:
SCH_GLOBALLABEL( const wxPoint& pos = wxPoint( 0, 0 ), const wxString& text = wxEmptyString );
SCH_GLOBALLABEL( const SCH_GLOBALLABEL& aGlobalLabel );
~SCH_GLOBALLABEL() { }
virtual void Draw( EDA_DRAW_PANEL* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
virtual wxString GetClass() const
{
return wxT( "SCH_GLOBALLABEL" );
}
/**
* Function SetOrientation
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetOrientation( int aSchematicOrientation );
/**
* Function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset() const;
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/**
* Load schematic global label entry from \a aLine in a .sch file.
*
* @param aLine - Essentially this is file to read schematic global label from.
* @param aErrorMsg - Description of the error if an error occurs while loading the
* schematic global label.
* @return True if the schematic global label loaded successfully.
*/
virtual bool Load( LINE_READER& aLine, wxString& aErrorMsg );
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_RECT GetBoundingBox() const;
/**
* Function CreateGraphicShape (virual)
* Calculates the graphic shape (a polygon) associated to the text
* @param aPoints = a buffer to fill with polygon corners coordinates
* @param aPos = Position of the shape
*/
virtual void CreateGraphicShape( std::vector <wxPoint>& aPoints, const wxPoint& aPos );
/** virtual function Mirror_Y
* mirror item relative to an Y axis
* @param aYaxis_position = the y axis position
*/
virtual void Mirror_Y( int aYaxis_position );
virtual void Mirror_X( int aXaxis_position );
virtual void Rotate( wxPoint rotationPoint );
virtual bool IsConnectable() const { return true; }
virtual wxString GetSelectMenuText() const;
virtual const char** GetMenuImage() const { return (const char**) add_glabel_xpm; }
private:
virtual bool doHitTest( const wxPoint& aPoint, int aAccuracy ) const;
virtual bool doIsConnected( const wxPoint& aPosition ) const { return m_Pos == aPosition; }
virtual EDA_ITEM* doClone() const;
};
class SCH_HIERLABEL : public SCH_TEXT
{
public:
SCH_HIERLABEL( const wxPoint& pos = wxPoint( 0, 0 ),
const wxString& text = wxEmptyString,
KICAD_T aType = SCH_HIERARCHICAL_LABEL_T );
SCH_HIERLABEL( const SCH_HIERLABEL& aHierLabel );
~SCH_HIERLABEL() { }
virtual void Draw( EDA_DRAW_PANEL* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
virtual wxString GetClass() const
{
return wxT( "SCH_HIERLABEL" );
}
/**
* Function SetOrientation
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetOrientation( int aSchematicOrientation );
/**
* Function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset() const;
/**
* Function CreateGraphicShape
* Calculates the graphic shape (a polygon) associated to the text
* @param aPoints = a buffer to fill with polygon corners coordinates
* @param Pos = Postion of the shape
*/
virtual void CreateGraphicShape( std::vector <wxPoint>& aPoints, const wxPoint& Pos );
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/**
* Load schematic hierarchical label entry from \a aLine in a .sch file.
*
* @param aLine - Essentially this is file to read schematic hierarchical label from.
* @param aErrorMsg - Description of the error if an error occurs while loading the
* schematic hierarchical label.
* @return True if the schematic hierarchical label loaded successfully.
*/
virtual bool Load( LINE_READER& aLine, wxString& aErrorMsg );
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_RECT GetBoundingBox() const;
/** virtual function Mirror_Y
* mirror item relative to an Y axis
* @param aYaxis_position = the y axis position
*/
virtual void Mirror_Y( int aYaxis_position );
virtual void Mirror_X( int aXaxis_position );
virtual void Rotate( wxPoint rotationPoint );
virtual bool IsConnectable() const { return true; }
virtual wxString GetSelectMenuText() const;
virtual const char** GetMenuImage() const { return (const char**) add_hierarchical_label_xpm; }
private:
virtual bool doHitTest( const wxPoint& aPoint, int aAccuracy ) const;
virtual bool doIsConnected( const wxPoint& aPosition ) const { return m_Pos == aPosition; }
virtual EDA_ITEM* doClone() const;
};
#endif /* CLASS_TEXT_LABEL_H */