kicad/eeschema/erc.cpp

808 lines
22 KiB
C++

/**************************************************/
/* Module de tst "ERC" ( Electrical Rules Check ) */
/**************************************************/
#include "fctsys.h"
#include "common.h"
#include "program.h"
#include "libcmp.h"
#include "general.h"
#include "netlist.h"
#include "protos.h"
#include "../bitmaps/ercgreen.xpm"
#include "../bitmaps/ercwarn.xpm"
#include "../bitmaps/ercerr.xpm"
#include "dialog_erc.h"
/* On teste
1 - conflits entre pins connectees ( ex: 2 sorties connectees )
2 - les imperatifs minimaux ( 1 entree doit etre connectee a une sortie )
*/
/* fonctions exportees */
/* fonctions importees */
/* fonctions locales */
static bool WriteDiagnosticERC(const wxString & FullFileName);
static void Diagnose(WinEDA_DrawPanel * panel, wxDC * DC,
ObjetNetListStruct * NetItemRef,
ObjetNetListStruct * NetItemTst, int MinConnexion, int Diag);
static void TestOthersItems(WinEDA_DrawPanel * panel,
wxDC * DC, ObjetNetListStruct * NetItemRef,
ObjetNetListStruct * NetStart,
int * NetNbItems, int * MinConnexion );
static void TestLabel(WinEDA_DrawPanel * panel, wxDC * DC,
ObjetNetListStruct * NetItemRef,
ObjetNetListStruct * StartNet);
/* Variable locales */
int WriteFichierERC = FALSE;
/* Tableau des types de conflit :
PIN_INPUT, PIN_OUTPUT, PIN_BIDI, PIN_TRISTATE, PIN_PASSIVE,
PIN_UNSPECIFIED, PIN_POWER_IN, PIN_POWER_OUT, PIN_OPENCOLLECTOR,
PIN_OPENEMITTER, PIN_NC
*/
#define OK 0
#define WAR 1 // utilisé aussi dans eeredraw
#define ERR 2
#define UNC 3
static wxChar * CommentERC_H[] =
{
wxT("Input Pin...."),
wxT("Output Pin..."),
wxT("BiDi Pin....."),
wxT("3 State Pin.."),
wxT("Passive Pin.."),
wxT("Unspec Pin..."),
wxT("Power IN Pin."),
wxT("PowerOUT Pin."),
wxT("Open Coll...."),
wxT("Open Emit...."),
wxT("No Conn......"),
NULL
};
static wxChar * CommentERC_V[] =
{
wxT("Input Pin"),
wxT("Output Pin"),
wxT("BiDi Pin"),
wxT("3 State Pin"),
wxT("Passive Pin"),
wxT("Unspec Pin"),
wxT("Power IN Pin"),
wxT("PowerOUT Pin"),
wxT("Open Coll"),
wxT("Open Emit"),
wxT("No Conn"),
NULL
};
/* Look up table which gives the diag for a pair of connected pins
Can be modified by ERC options.
at start up: must be loaded by DefaultDiagErc
*/
static int DiagErc[PIN_NMAX][PIN_NMAX];
bool DiagErcTableInit; // go to TRUE after DiagErc init
/* Default Look up table which gives the diag for a pair of connected pins
Same as DiagErc, but cannot be modified
Used to init or reset DiagErc
*/
static int DefaultDiagErc[PIN_NMAX][PIN_NMAX] =
{ /* I, O, Bi, 3S, Pas, UnS,PwrI,PwrO, OC, OE, NC */
/* I */ { OK, OK, OK, OK, OK, WAR, OK, OK, OK, OK, WAR },
/* O */ { OK, ERR, OK, WAR, OK, WAR, OK, ERR, ERR, ERR, WAR },
/* Bi*/ { OK, OK, OK, OK, OK, WAR, OK, WAR, OK, WAR, WAR },
/* 3S*/ { OK, WAR, OK, OK, OK, WAR, WAR, ERR, WAR, WAR, WAR },
/*Pas*/ { OK, OK, OK, OK, OK, WAR, OK, OK, OK, OK, WAR },
/*UnS */{ WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR },
/*PwrI*/{ OK, OK, OK, WAR, OK, WAR, OK, OK, OK, OK, ERR },
/*PwrO*/{ OK, ERR, WAR, ERR, OK, WAR, OK, ERR, ERR, ERR, WAR },
/* OC */{ OK, ERR, OK, WAR, OK, WAR, OK, ERR, OK, OK, WAR },
/* OE */{ OK, ERR, WAR, WAR, OK, WAR, OK, ERR, OK, OK, WAR },
/* NC */{ WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR, WAR }
} ;
/* Minimal connection table */
#define DRV 3 /* Net driven by a signal (a pin output for instance) */
#define NET_NC 2 /* Net "connected" to a "NoConnect symbol" */
#define NOD 1 /* Net not driven ( Such as 2 or more connected inputs )*/
#define NOC 0 /* Pin isolee, non connectee */
/* Look up table which gives the minimal drive for a pair of connected pins on a net
Initial state of a net is NOC (No Connection)
Can be updated to NET_NC, or NOD (Not Driven) or DRV (DRIven)
Can be updated to NET_NC only if the previous state is NOC
Nets are OK when their final state is NET_NC or DRV
Nets with the state NOD have no source signal
*/
static int MinimalReq[PIN_NMAX][PIN_NMAX] =
{ /* In, Out, Bi, 3S, Pas, UnS,PwrI,PwrO, OC, OE, NC */
/* In*/ { NOD, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC },
/*Out*/ { DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, NOC },
/* Bi*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC },
/* 3S*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC },
/*Pas*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC },
/*UnS*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC },
/*PwrI*/{ NOD, DRV, NOD, NOD, NOD, NOD, NOD, DRV, NOD, NOD, NOC },
/*PwrO*/{ DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, DRV, NOC },
/* OC*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC },
/* OE*/ { DRV, DRV, DRV, DRV, DRV, DRV, NOD, DRV, DRV, DRV, NOC },
/* NC*/ { NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC, NOC }
} ;
/*************************************************************/
void InstallErcFrame(WinEDA_SchematicFrame *parent, wxPoint & pos)
/*************************************************************/
/* Install function for the ERC dialog frame
*/
{
WinEDA_ErcFrame * frame = new WinEDA_ErcFrame(parent);
frame->ShowModal(); frame->Destroy();
}
/*********************************************/
void WinEDA_ErcFrame::ReBuildMatrixPanel(void)
/*********************************************/
/* Build or rebuild the panel showing the ERC matrix
*/
{
int ii, jj, event_id, text_height;
wxPoint pos, BoxMatrixPosition;
#define BITMAP_SIZE 19
int bitmap_size = BITMAP_SIZE;
wxStaticText * text;
int x, y;
wxSize BoxMatrixMinSize;
if ( ! DiagErcTableInit )
{
memcpy(DiagErc, DefaultDiagErc, sizeof (DefaultDiagErc));
DiagErcTableInit = TRUE;
}
// Get the current text size :
text = new wxStaticText( m_PanelERCOptions,-1,wxT("W"), pos); // this is a dummy text
text_height = text->GetRect().GetHeight();
bitmap_size = MAX(bitmap_size, text_height);
delete text;
// compute the Y pos interval:
BoxMatrixMinSize.y = (bitmap_size*(PIN_NMAX+1)) + 5;
GetSizer()->Fit(this);
GetSizer()->SetSizeHints(this);
pos = m_MatrixSizer->GetPosition();
// Size computation is not made in constructor, in some wxWidgets version,
// and m_BoxSizerForERC_Opt position is always 0,0. and we can't use it
pos.x = MAX( pos.x, 5);
pos.y = MAX( pos.y, m_ResetOptButton->GetRect().GetHeight() + 30);
BoxMatrixPosition = pos;
pos.y += text_height;
if ( m_Initialized == FALSE )
{
for ( ii = 0; ii < PIN_NMAX; ii++ )
{
y = pos.y + (ii * bitmap_size);
text = new wxStaticText( m_PanelERCOptions,-1,CommentERC_H[ii], wxPoint(5,y));
x = text->GetRect().GetRight();
pos.x = MAX(pos.x, x);
}
pos.x += 5;
}
else pos = m_ButtonList[0][0]->GetPosition();
for ( ii = 0; ii < PIN_NMAX; ii++ )
{
y = pos.y + (ii * bitmap_size);
for ( jj = 0; jj <= ii; jj++ )
{
int diag = DiagErc[ii][jj];
x = pos.x + (jj * bitmap_size);
if( (ii == jj) && ! m_Initialized )
{
wxPoint txtpos;
txtpos.x = x + 4; txtpos.y = y - bitmap_size;
text = new wxStaticText( m_PanelERCOptions,-1,CommentERC_V[ii], txtpos);
BoxMatrixMinSize.x = MAX( BoxMatrixMinSize.x, text->GetRect().GetRight());
}
event_id = ID_MATRIX_0 + ii + (jj * PIN_NMAX);
delete m_ButtonList[ii][jj];
switch ( diag )
{
case OK:
m_ButtonList[ii][jj] = new wxBitmapButton(m_PanelERCOptions,
event_id,
wxBitmap(green_xpm),
wxPoint(x,y) );
break;
case WAR:
m_ButtonList[ii][jj] = new wxBitmapButton(m_PanelERCOptions,
event_id,
wxBitmap(warning_xpm),
wxPoint(x,y) );
break;
case ERR:
m_ButtonList[ii][jj] = new wxBitmapButton(m_PanelERCOptions,
event_id,
wxBitmap(error_xpm),
wxPoint(x,y) );
break;
}
}
}
if ( !m_Initialized )
{
BoxMatrixMinSize.x += 5;
m_MatrixSizer->SetMinSize(BoxMatrixMinSize);
BoxMatrixMinSize.y += BoxMatrixPosition.y;
m_PanelMatrixSizer->SetMinSize(BoxMatrixMinSize);
}
m_Initialized = TRUE;
}
/**************************************************/
void WinEDA_ErcFrame::TestErc(wxCommandEvent& event)
/**************************************************/
{
ObjetNetListStruct * NetItemRef, * OldItem, * StartNet, * Lim;
int NetNbItems, MinConn;
if ( ! DiagErcTableInit )
{
memcpy(DiagErc, DefaultDiagErc, sizeof (DefaultDiagErc));
DiagErcTableInit = TRUE;
}
WriteFichierERC = m_WriteResultOpt->GetValue();
ReAnnotatePowerSymbolsOnly();
if( CheckAnnotate(m_Parent, 0) )
{
DisplayError(this, _("Annotation Required!") );
return;
}
/* Effacement des anciens marqueurs DRC */
DelERCMarkers(event);
wxClientDC dc(m_Parent->DrawPanel);
m_Parent->DrawPanel->PrepareGraphicContext(&dc);
g_EESchemaVar.NbErrorErc = 0;
g_EESchemaVar.NbWarningErc = 0;
/* Cleanup the entire hierarchy */
EDA_ScreenList ScreenList(NULL);
for ( SCH_SCREEN * Screen = ScreenList.GetFirst(); Screen != NULL; Screen = ScreenList.GetNext() )
{
bool ModifyWires;
ModifyWires = Screen->SchematicCleanUp(NULL);
/* if wire list has changed, delete Udo Redo list to avoid
pointers on deleted data problems */
if ( ModifyWires )
Screen->ClearUndoRedoList();
}
m_Parent->BuildNetListBase();
/* Analyse de la table des connexions : */
Lim = g_TabObjNet + g_NbrObjNet;
/* Reset du flag m_FlagOfConnection, utilise par la suite */
for (NetItemRef = g_TabObjNet; NetItemRef < Lim; NetItemRef ++ )
NetItemRef->m_FlagOfConnection = (IsConnectType) 0;
NetNbItems = 0; MinConn = NOC;
StartNet = OldItem = NetItemRef = g_TabObjNet;
for ( ; NetItemRef < Lim; NetItemRef ++ )
{
/* Tst changement de net */
if( OldItem->m_NetCode != NetItemRef->m_NetCode)
{
MinConn = NOC; NetNbItems = 0; StartNet = NetItemRef;
}
switch ( NetItemRef->m_Type )
{
case NET_SEGMENT:
case NET_BUS:
case NET_JONCTION:
case NET_LABEL:
case NET_BUSLABELMEMBER:
case NET_PINLABEL:
break;
case NET_GLOBLABEL:
case NET_GLOBBUSLABELMEMBER:
case NET_SHEETLABEL:
case NET_SHEETBUSLABELMEMBER:
TestLabel(m_Parent->DrawPanel, &dc, NetItemRef, StartNet);
break;
case NET_NOCONNECT:
MinConn = NET_NC;
if( NetNbItems != 0 )
Diagnose(m_Parent->DrawPanel, &dc, NetItemRef, NULL, MinConn, UNC);
break;
case NET_PIN:
TestOthersItems(m_Parent->DrawPanel, &dc,
NetItemRef, StartNet, &NetNbItems , &MinConn);
break;
}
OldItem = NetItemRef;
}
FreeTabNetList(g_TabObjNet, g_NbrObjNet );
wxString num;
num.Printf(wxT("%d"), g_EESchemaVar.NbErrorErc);
m_TotalErrCount->SetLabel(num);
num.Printf(wxT("%d"), g_EESchemaVar.NbErrorErc-g_EESchemaVar.NbWarningErc);
m_LastErrCount->SetLabel(num);
num.Printf(wxT("%d"), g_EESchemaVar.NbWarningErc);
m_LastWarningCount->SetLabel(num);
/* Generation ouverture fichier diag */
if( WriteFichierERC == TRUE )
{
wxString ErcFullFileName;
ErcFullFileName = ScreenSch->m_FileName;
ChangeFileNameExt(ErcFullFileName, wxT(".erc"));
ErcFullFileName = EDA_FileSelector(_("ERC file:"),
wxEmptyString, /* Chemin par defaut */
ErcFullFileName, /* nom fichier par defaut */
wxT(".erc"), /* extension par defaut */
wxT("*.erc"), /* Masque d'affichage */
this,
wxFD_SAVE,
TRUE
);
if ( ErcFullFileName.IsEmpty()) return;
if ( WriteDiagnosticERC(ErcFullFileName) )
{
Close(TRUE);
wxString editorname = GetEditorName();
AddDelimiterString(ErcFullFileName);
ExecuteFile(this, editorname, ErcFullFileName);
}
}
}
/***********************************************************/
void WinEDA_ErcFrame::DelERCMarkers(wxCommandEvent& event)
/***********************************************************/
/* Delete the old ERC markers, over the whole hierarchy
*/
{
EDA_BaseStruct * DrawStruct;
DrawMarkerStruct * Marker;
wxClientDC dc(m_Parent->DrawPanel);
m_Parent->DrawPanel->PrepareGraphicContext(&dc);
// Delete markers for the current screen
DrawStruct = m_Parent->GetScreen()->EEDrawList;
for ( ; DrawStruct != NULL; DrawStruct = DrawStruct->Pnext )
{
if(DrawStruct->Type() != DRAW_MARKER_STRUCT_TYPE ) continue;
/* Marqueur trouve */
Marker = (DrawMarkerStruct * ) DrawStruct;
if( Marker->m_Type == MARQ_ERC )
RedrawOneStruct(m_Parent->DrawPanel, &dc, Marker, g_XorMode);
}
/* Suppression en memoire des marqueurs ERC */
DeleteAllMarkers(MARQ_ERC);
}
/**************************************************************/
void WinEDA_ErcFrame::ResetDefaultERCDiag(wxCommandEvent& event)
/**************************************************************/
/* Remet aux valeurs par defaut la matrice de diagnostic
*/
{
memcpy(DiagErc,DefaultDiagErc, sizeof(DiagErc) );
ReBuildMatrixPanel();
}
/************************************************************/
void WinEDA_ErcFrame::ChangeErrorLevel(wxCommandEvent& event)
/************************************************************/
/* Change the error level for the pressed button, on the matrix table
*/
{
int id, level, ii, x, y;
wxBitmapButton * Butt;
char ** new_bitmap_xpm = NULL;
wxPoint pos;
id = event.GetId();
ii = id - ID_MATRIX_0;
Butt = (wxBitmapButton*) event.GetEventObject();
pos = Butt->GetPosition();
x = ii /PIN_NMAX; y = ii % PIN_NMAX;
level = DiagErc[y][x];
switch (level )
{
case OK:
level = WAR;
new_bitmap_xpm = warning_xpm;
break;
case WAR :
level = ERR;
new_bitmap_xpm = error_xpm;
break;
case ERR:
level = OK;
new_bitmap_xpm = green_xpm;
break;
}
if ( new_bitmap_xpm )
{
delete Butt;
Butt = new wxBitmapButton(m_PanelERCOptions, id,
wxBitmap(new_bitmap_xpm), pos);
m_ButtonList[y][x] = Butt;
DiagErc[y][x] = DiagErc[x][y] = level;
}
}
/********************************************************/
static void Diagnose(WinEDA_DrawPanel * panel, wxDC * DC,
ObjetNetListStruct * NetItemRef,
ObjetNetListStruct * NetItemTst,
int MinConn, int Diag)
/********************************************************/
/* Routine de creation du marqueur ERC correspondant au conflit electrique
entre NetItemRef et NetItemTst
si MinConn < 0: Traitement des erreurs sur labels
*/
{
DrawMarkerStruct * Marker = NULL;
wxString DiagLevel;
SCH_SCREEN * screen;
int ii, jj;
if( Diag == OK ) return;
/* Creation du nouveau marqueur type Erreur ERC */
Marker = new DrawMarkerStruct(NetItemRef->m_Start, wxEmptyString);
Marker->m_Type = MARQ_ERC;
Marker->m_MarkFlags = WAR;
screen = NetItemRef->m_Screen;
Marker->Pnext = screen->EEDrawList;
screen->EEDrawList = Marker;
g_EESchemaVar.NbErrorErc++;
g_EESchemaVar.NbWarningErc++;
if( MinConn < 0 ) // Traitement des erreurs sur labels
{
if( (NetItemRef->m_Type == NET_GLOBLABEL) ||
(NetItemRef->m_Type == NET_GLOBBUSLABELMEMBER) )
{
Marker->m_Comment.Printf( _("Warning GLabel %s not connected to SheetLabel"),
NetItemRef->m_Label->GetData());
}
else Marker->m_Comment.Printf( _("Warning SheetLabel %s not connected to GLabel"),
NetItemRef->m_Label->GetData());
if( screen == panel->GetScreen() ) RedrawOneStruct(panel, DC, Marker, GR_COPY);
return;
}
ii = NetItemRef->m_ElectricalType;
if( NetItemTst == NULL )
{
if( MinConn == NOC ) /* 1 seul element dans le net */
{
Marker->m_Comment.Printf( _("Warning Pin %s Unconnected"), MsgPinElectricType[ii]);
if( screen == panel->GetScreen() )
RedrawOneStruct(panel, DC, Marker, GR_COPY);
return;
}
if( MinConn == NOD ) /* pas de pilotage du net */
{
Marker->m_Comment.Printf(
_("Warning Pin %s not driven (Net %d)"),
MsgPinElectricType[ii], NetItemRef->m_NetCode);
if( screen == panel->GetScreen() )
RedrawOneStruct(panel, DC, Marker, GR_COPY);
return;
}
if( Diag == UNC )
{
Marker->m_Comment.Printf(
_("Warning More than 1 Pin connected to UnConnect symbol") );
if( screen == panel->GetScreen() )
RedrawOneStruct(panel, DC, Marker, GR_COPY);
return;
}
}
if( NetItemTst ) /* Erreur entre 2 pins */
{
jj = NetItemTst->m_ElectricalType;
DiagLevel = _("Warning");
if(Diag == ERR)
{
DiagLevel = _("Error");
Marker->m_MarkFlags = ERR;
g_EESchemaVar.NbWarningErc--;
}
Marker->m_Comment.Printf( _("%s: Pin %s connected to Pin %s (net %d)"), DiagLevel.GetData(),
MsgPinElectricType[ii],
MsgPinElectricType[jj], NetItemRef->m_NetCode);
if( screen == panel->GetScreen() )
RedrawOneStruct(panel, DC, Marker, GR_COPY);
}
}
/********************************************************************/
static void TestOthersItems(WinEDA_DrawPanel * panel, wxDC * DC,
ObjetNetListStruct * NetItemRef,
ObjetNetListStruct * netstart,
int * NetNbItems, int * MinConnexion)
/********************************************************************/
/* Routine testant les conflits electriques entre
NetItemRef
et les autres items du meme net
*/
{
ObjetNetListStruct * NetItemTst, * Lim;
int ref_elect_type, jj, erc = OK, local_minconn;
/* Analyse de la table des connexions : */
Lim = g_TabObjNet + g_NbrObjNet; // pointe la fin de la liste
ref_elect_type = NetItemRef->m_ElectricalType;
NetItemTst = netstart;
local_minconn = NOC;
/* Examen de la liste des Pins connectees a NetItemRef */
for ( ; ; NetItemTst ++ )
{
if ( NetItemRef == NetItemTst ) continue;
/* Est - on toujours dans le meme net ? */
if( (NetItemTst >= Lim) || // fin de liste (donc fin de net)
(NetItemRef->m_NetCode != NetItemTst->m_NetCode) ) // fin de net
{ /* Fin de netcode trouve: Tst connexion minimum */
if( (*MinConnexion < NET_NC ) &&
(local_minconn < NET_NC ) ) /* pin non connectée ou non pilotee */
{
Diagnose(panel, DC, NetItemRef, NULL, local_minconn, WAR);
* MinConnexion = DRV; // inhibition autres messages de ce type pour ce net
}
return;
}
switch ( NetItemTst->m_Type )
{
case NET_SEGMENT:
case NET_BUS:
case NET_JONCTION:
case NET_LABEL:
case NET_GLOBLABEL:
case NET_BUSLABELMEMBER:
case NET_GLOBBUSLABELMEMBER:
case NET_SHEETBUSLABELMEMBER:
case NET_SHEETLABEL:
case NET_PINLABEL:
break;
case NET_NOCONNECT:
local_minconn = MAX( NET_NC, local_minconn);
break;
case NET_PIN:
jj = NetItemTst->m_ElectricalType;
local_minconn = MAX( MinimalReq[ref_elect_type][jj], local_minconn );
if ( NetItemTst <= NetItemRef ) break;
*NetNbItems += 1;
if( erc == OK ) // 1 marqueur par pin maxi
{
erc = DiagErc[ref_elect_type][jj];
if (erc != OK )
{
if( NetItemTst->m_FlagOfConnection == 0 )
{
Diagnose(panel, DC, NetItemRef, NetItemTst, 0, erc);
NetItemTst->m_FlagOfConnection = (IsConnectType) 1;
}
}
}
break;
}
}
}
/********************************************************/
static bool WriteDiagnosticERC(const wxString & FullFileName)
/*********************************************************/
/* Create the Diagnostic file (<xxx>.erc file)
*/
{
EDA_BaseStruct * DrawStruct;
DrawMarkerStruct * Marker;
char Line[256];
static FILE * OutErc;
DrawSheetStruct * Sheet;
wxString msg;
if( (OutErc = wxFopen( FullFileName, wxT("wt"))) == NULL ) return FALSE;
DateAndTime(Line);
msg = _("ERC control");
fprintf( OutErc, "%s (%s)\n", CONV_TO_UTF8(msg), Line);
EDA_ScreenList ScreenList(NULL);
for ( SCH_SCREEN * Screen = ScreenList.GetFirst(); Screen != NULL; Screen = ScreenList.GetNext() )
{
Sheet = (DrawSheetStruct*) Screen;
msg.Printf( _("\n***** Sheet %d (%s)\n"),
Sheet->m_SheetNumber,
Screen == ScreenSch ? _("Root") : Sheet->m_SheetName.GetData());
fprintf( OutErc, "%s", CONV_TO_UTF8(msg));
DrawStruct = Screen->EEDrawList;
for ( ; DrawStruct != NULL; DrawStruct = DrawStruct->Pnext)
{
if(DrawStruct->Type() != DRAW_MARKER_STRUCT_TYPE )
continue;
/* Marqueur trouve */
Marker = (DrawMarkerStruct * ) DrawStruct;
if( Marker->m_Type != MARQ_ERC ) continue;
/* Write diag marqueur */
msg.Printf( _("ERC: %s (X= %2.3f inches, Y= %2.3f inches\n"),
Marker->GetComment().GetData(),
(float)Marker->m_Pos.x / 1000,
(float)Marker->m_Pos.y / 1000);
fprintf( OutErc, "%s", CONV_TO_UTF8(msg));
}
}
msg.Printf( _("\n >> Errors ERC: %d\n"), g_EESchemaVar.NbErrorErc);
fprintf( OutErc, "%s", CONV_TO_UTF8(msg));
fclose ( OutErc );
return TRUE;
}
/***********************************************************************/
void TestLabel(WinEDA_DrawPanel * panel, wxDC * DC,
ObjetNetListStruct * NetItemRef, ObjetNetListStruct * StartNet)
/***********************************************************************/
/* Routine controlant qu'un sheetLabel est bien connecte a un Glabel de la
sous-feuille correspondante
*/
{
ObjetNetListStruct * NetItemTst, * Lim;
int erc = 1;
/* Analyse de la table des connexions : */
Lim = g_TabObjNet + g_NbrObjNet;
NetItemTst = StartNet;
/* Examen de la liste des Labels connectees a NetItemRef */
for ( ; ; NetItemTst ++ )
{
if( NetItemTst == NetItemRef ) continue;
/* Est - on toujours dans le meme net ? */
if( ( NetItemTst == Lim ) ||
( NetItemRef->m_NetCode != NetItemTst->m_NetCode ) )
{ /* Fin de netcode trouve */
if( erc )
{ /* GLabel ou SheetLabel orphelin */
Diagnose(panel, DC, NetItemRef, NULL, -1, WAR);
}
return;
}
if( (NetItemRef->m_Type == NET_GLOBLABEL) ||
(NetItemRef->m_Type == NET_GLOBBUSLABELMEMBER) )
{
switch ( NetItemTst->m_Type )
{
case NET_SEGMENT:
case NET_BUS:
case NET_JONCTION:
case NET_LABEL:
case NET_GLOBLABEL:
case NET_BUSLABELMEMBER:
case NET_GLOBBUSLABELMEMBER:
case NET_PINLABEL:
case NET_NOCONNECT:
case NET_PIN:
break;
case NET_SHEETBUSLABELMEMBER:
case NET_SHEETLABEL:
/* Tst si le GLabel est bien dans la bonne sousfeuille */
if( NetItemRef->m_SheetNumber == NetItemTst->m_NumInclude )
{
erc = 0;
}
break;
}
}
else
{
switch ( NetItemTst->m_Type )
{
case NET_SEGMENT:
case NET_BUS:
case NET_JONCTION:
case NET_LABEL:
case NET_BUSLABELMEMBER:
case NET_SHEETBUSLABELMEMBER:
case NET_SHEETLABEL:
case NET_PINLABEL:
case NET_NOCONNECT:
case NET_PIN:
break;
case NET_GLOBLABEL:
case NET_GLOBBUSLABELMEMBER:
/* Tst si le GLabel est bien dans la bonne sous-feuille */
if( NetItemTst->m_SheetNumber == NetItemRef->m_NumInclude )
{
erc = 0;
}
break;
}
}
}
}