kicad/pcbnew/editrack-part2.cpp

431 lines
13 KiB
C++

/*******************************/
/* Edit tracks */
/*******************************/
#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "class_board_design_settings.h"
#include "protos.h"
/* Displays or hides the ratsnest. */
void WinEDA_PcbFrame::Ratsnest_On_Off( wxDC* DC )
{
unsigned ii;
if( ( GetBoard()->m_Status_Pcb & LISTE_RATSNEST_ITEM_OK ) == 0 )
{
if( g_Show_Ratsnest )
Compile_Ratsnest( DC, TRUE );
return;
}
DrawGeneralRatsnest( DC, 0 );
if( GetBoard()->GetRatsnestsCount() == 0 )
return;
if( g_Show_Ratsnest )
{
for( ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
{
GetBoard()->m_FullRatsnest[ii].m_Status |= CH_VISIBLE;
}
}
else
{
for( ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
{
GetBoard()->m_FullRatsnest[ii].m_Status &= ~CH_VISIBLE;
}
}
}
/*
* Exchange layer the track pointed to by the mouse:
* The track must be on one layer of work,
* It is put on another layer of work, if possible
* (Or DRC = Off).
*/
void WinEDA_PcbFrame::ExChange_Track_Layer( TRACK* pt_segm, wxDC* DC )
{
int ii;
TRACK* pt_track;
int l1, l2, nb_segm;
if( ( pt_segm == NULL ) || ( pt_segm->Type() == TYPE_ZONE ) )
{
return;
}
l1 = Route_Layer_TOP; l2 = Route_Layer_BOTTOM;
pt_track = Marque_Une_Piste( GetBoard(), pt_segm, &nb_segm, NULL, true );
Trace_Une_Piste( DrawPanel, DC, pt_track, nb_segm, GR_XOR );
/* Clear the BUSY flag and backup member. Param layer original. */
ii = nb_segm; pt_segm = pt_track;
for( ; ii > 0; ii--, pt_segm = (TRACK*) pt_segm->Next() )
{
pt_segm->SetState( BUSY, OFF );
pt_segm->m_Param = pt_segm->GetLayer(); /* For backup. */
}
ii = 0; pt_segm = pt_track;
for( ; ii < nb_segm; ii++, pt_segm = (TRACK*) pt_segm->Next() )
{
if( pt_segm->Type() == TYPE_VIA )
continue;
/* Invert layers. */
if( pt_segm->GetLayer() == l1 )
pt_segm->SetLayer( l2 );
else if( pt_segm->GetLayer() == l2 )
pt_segm->SetLayer( l1 );
if( Drc_On && BAD_DRC==m_drc->Drc( pt_segm, GetBoard()->m_Track ) )
{
/* Discard changes. */
ii = 0;
pt_segm = pt_track;
for( ; ii < nb_segm; ii++, pt_segm = pt_segm->Next() )
{
pt_segm->SetLayer( pt_segm->m_Param );
}
Trace_Une_Piste( DrawPanel, DC, pt_track, nb_segm, GR_OR );
DisplayError( this, _( "Drc error, canceled" ), 10 );
return;
}
}
Trace_Une_Piste( DrawPanel, DC, pt_track, nb_segm, GR_OR | GR_SURBRILL );
/* Control of segment end point, is it on a pad? */
ii = 0; pt_segm = pt_track;
for( ; ii < nb_segm; pt_segm = pt_segm->Next(), ii++ )
{
pt_segm->start = Locate_Pad_Connecte( GetBoard(), pt_segm, START );
pt_segm->end = Locate_Pad_Connecte( GetBoard(), pt_segm, END );
}
test_1_net_connexion( DC, pt_track->GetNet() );
pt_track->DisplayInfo( this );
GetScreen()->SetModify();
}
bool WinEDA_PcbFrame::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
unsigned itmp;
if( aTrack == NULL )
{
if( ((PCB_SCREEN*)GetScreen())->m_Active_Layer !=
((PCB_SCREEN*)GetScreen())->m_Route_Layer_TOP )
((PCB_SCREEN*)GetScreen())->m_Active_Layer =
((PCB_SCREEN*)GetScreen())->m_Route_Layer_TOP;
else
((PCB_SCREEN*)GetScreen())->m_Active_Layer =
((PCB_SCREEN*)GetScreen())->m_Route_Layer_BOTTOM;
UpdateStatusBar();
SetToolbars();
return true;
}
/* Avoid more than one via on the current location: */
if( Locate_Via( GetBoard(), g_CurrentTrackSegment->m_End,
g_CurrentTrackSegment->GetLayer() ) )
return false;
for( TRACK* segm = g_FirstTrackSegment; segm; segm = segm->Next() )
{
if( segm->Type()==TYPE_VIA
&& g_CurrentTrackSegment->m_End==segm->m_Start )
return false;
}
/* Is the current segment Ok (no DRC error) ? */
if( Drc_On )
{
if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
/* DRC error, the change layer is not made */
return false;
// Handle 2 segments.
if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
{
if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(),
GetBoard()->m_Track ) )
return false;
}
}
/* Save current state before placing a via.
* If the via cannot be placed this current state will be reused
*/
itmp = g_CurrentTrackList.GetCount();
Begin_Route( g_CurrentTrackSegment, DC );
DrawPanel->ManageCurseur( DrawPanel, DC, FALSE );
/* create the via */
SEGVIA* via = new SEGVIA( GetBoard() );
via->m_Flags = IS_NEW;
via->m_Shape = g_DesignSettings.m_CurrentViaType;
via->m_Width = GetBoard()->GetCurrentViaSize();
via->SetNet( g_HightLigth_NetCode );
via->m_Start = via->m_End = g_CurrentTrackSegment->m_End;
int old_layer = ((PCB_SCREEN*)GetScreen())->m_Active_Layer;
// swap the layers.
if( ((PCB_SCREEN*)GetScreen())->m_Active_Layer !=
((PCB_SCREEN*)GetScreen())->m_Route_Layer_TOP )
((PCB_SCREEN*)GetScreen())->m_Active_Layer =
((PCB_SCREEN*)GetScreen())->m_Route_Layer_TOP;
else
((PCB_SCREEN*)GetScreen())->m_Active_Layer =
((PCB_SCREEN*)GetScreen())->m_Route_Layer_BOTTOM;
/* Adjust the via layer pair */
switch ( via->Shape() )
{
case VIA_BLIND_BURIED:
via->SetLayerPair( old_layer,
((PCB_SCREEN*)GetScreen())->m_Active_Layer );
via->SetDrillValue( GetBoard()->GetCurrentViaDrill() );
break;
case VIA_MICROVIA: // from external to the near neighbor inner layer
if ( old_layer == LAYER_N_BACK )
((PCB_SCREEN*)GetScreen())->m_Active_Layer = LAYER_N_2;
else if ( old_layer == LAYER_N_FRONT )
((PCB_SCREEN*)GetScreen())->m_Active_Layer =
GetBoard()->m_BoardSettings->GetCopperLayerCount() - 2;
else if ( old_layer == LAYER_N_2 )
((PCB_SCREEN*)GetScreen())->m_Active_Layer = LAYER_N_BACK;
else if ( old_layer == GetBoard()->m_BoardSettings->GetCopperLayerCount() - 2 )
((PCB_SCREEN*)GetScreen())->m_Active_Layer = LAYER_N_FRONT;
// else error
via->SetLayerPair( old_layer,
((PCB_SCREEN*)GetScreen())->m_Active_Layer );
{
NETINFO_ITEM* net = GetBoard()->FindNet( via->GetNet() );
via->m_Width = net->GetMicroViaSize();
}
break;
default:
// Usual via is from copper to component; layer pair is 0 and 0x0F.
via->SetDrillValue( GetBoard()->GetCurrentViaDrill() );
via->SetLayerPair( LAYER_N_BACK, LAYER_N_FRONT );
break;
}
if( Drc_On && BAD_DRC==m_drc->Drc( via, GetBoard()->m_Track ) )
{
/* DRC fault: the Via cannot be placed here ... */
delete via;
((PCB_SCREEN*)GetScreen())->m_Active_Layer = old_layer;
DrawPanel->ManageCurseur( DrawPanel, DC, FALSE );
// delete the track(s) added in Begin_Route()
while( g_CurrentTrackList.GetCount() > itmp )
{
Delete_Segment( DC, g_CurrentTrackSegment );
}
// use the form of SetCurItem() which does not write to the msg panel,
// SCREEN::SetCurItem(), so the DRC error remains on screen.
// WinEDA_PcbFrame::SetCurItem() calls DisplayInfo().
GetScreen()->SetCurItem( g_CurrentTrackSegment );
return false;
}
TRACK* lastNonVia = g_CurrentTrackSegment;
/* A new via was created. It was Ok.
*/
g_CurrentTrackList.PushBack( via );
/* The via is now in linked list and we need a new track segment
* after the via, starting at via location.
* it will become the new current segment (from via to the mouse cursor)
*/
TRACK* track = lastNonVia->Copy();
/* the above creates a new segment from the last entered segment, with the
* current width, flags, netcode, etc... values.
* layer, start and end point are not correct,
* and will be modified next
*/
// set the layer to the new value
track->SetLayer( ((PCB_SCREEN*)GetScreen())->m_Active_Layer );
/* the start point is the via position and the end point is the cursor
* which also is on the via (will change when moving mouse)
*/
track->m_Start = track->m_End = via->m_Start;
g_CurrentTrackList.PushBack( track );
if( g_TwoSegmentTrackBuild )
{
// Create a second segment (we must have 2 track segments to adjust)
g_CurrentTrackList.PushBack( g_CurrentTrackSegment->Copy() );
}
DrawPanel->ManageCurseur( DrawPanel, DC, FALSE );
via->DisplayInfo( this );
UpdateStatusBar();
SetToolbars();
return true;
}
/* Displays:
* The status of the net on top of the screen segment advanced by mouse.
* PCB status or bottom of screen if no segment peak.
*/
void WinEDA_PcbFrame::Affiche_Status_Net( wxDC* DC )
{
TRACK* pt_segm;
int masquelayer =
g_TabOneLayerMask[((PCB_SCREEN*)GetScreen())->m_Active_Layer];
pt_segm = Locate_Pistes( GetBoard()->m_Track, masquelayer,
CURSEUR_OFF_GRILLE );
if( pt_segm == NULL )
GetBoard()->DisplayInfo( this );
else
test_1_net_connexion( DC, pt_segm->GetNet() );
}
/* Draw ratsnest.
*
* The net edge pad with mouse or module locates the mouse.
* Delete if the ratsnest if no module or pad is selected.
*/
void WinEDA_PcbFrame::Show_1_Ratsnest( EDA_BaseStruct* item, wxDC* DC )
{
D_PAD* pt_pad = NULL;
MODULE* Module = NULL;
if( g_Show_Ratsnest )
return;
if( ( GetBoard()->m_Status_Pcb & LISTE_RATSNEST_ITEM_OK ) == 0 )
Compile_Ratsnest( DC, TRUE );
if( item )
{
if( item->Type() == TYPE_PAD )
{
pt_pad = (D_PAD*) item;
Module = (MODULE*) pt_pad->GetParent();
}
if( pt_pad ) /* Displaying the ratsnest of the corresponding net. */
{
pt_pad->DisplayInfo( this );
for( unsigned ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
{
RATSNEST_ITEM* net = &GetBoard()->m_FullRatsnest[ii];
if( net->GetNet() == pt_pad->GetNet() )
{
if( ( net->m_Status & CH_VISIBLE ) != 0 )
continue;
net->m_Status |= CH_VISIBLE;
if( ( net->m_Status & CH_ACTIF ) == 0 )
continue;
net->Draw( DrawPanel, DC, GR_XOR, wxPoint( 0, 0 ) );
}
}
}
else
{
if( item->Type() == TYPE_TEXTE_MODULE )
{
if( item->GetParent()
&& ( item->GetParent()->Type() == TYPE_MODULE ) )
Module = (MODULE*) item->GetParent();
}
else if( item->Type() == TYPE_MODULE )
{
Module = (MODULE*) item;
}
if( Module )
{
Module->DisplayInfo( this );
pt_pad = Module->m_Pads;
for( ; pt_pad != NULL; pt_pad = (D_PAD*) pt_pad->Next() )
{
for( unsigned ii = 0; ii < GetBoard()->GetRatsnestsCount();
ii++ )
{
RATSNEST_ITEM* net = &GetBoard()->m_FullRatsnest[ii];
if( ( net->m_PadStart == pt_pad )
|| ( net->m_PadEnd == pt_pad ) )
{
if( net->m_Status & CH_VISIBLE )
continue;
net->m_Status |= CH_VISIBLE;
if( (net->m_Status & CH_ACTIF) == 0 )
continue;
net->Draw( DrawPanel, DC, GR_XOR, wxPoint( 0, 0 ) );
}
}
}
pt_pad = NULL;
}
}
}
/* Erase if no pad or module has been selected. */
if( ( pt_pad == NULL ) && ( Module == NULL ) )
{
DrawGeneralRatsnest( DC );
for( unsigned ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
GetBoard()->m_FullRatsnest[ii].m_Status &= ~CH_VISIBLE;
}
}
/* High light the unconnected pads
*/
void WinEDA_PcbFrame::Affiche_PadsNoConnect( wxDC* DC )
{
for( unsigned ii = 0; ii < GetBoard()->GetRatsnestsCount(); ii++ )
{
RATSNEST_ITEM* net = &GetBoard()->m_FullRatsnest[ii];
if( (net->m_Status & CH_ACTIF) == 0 )
continue;
net->m_PadStart->Draw( DrawPanel, DC, GR_OR | GR_SURBRILL );
net->m_PadEnd->Draw( DrawPanel, DC, GR_OR | GR_SURBRILL );
}
}