kicad/pcbnew/dialog_pad_properties.cpp

682 lines
23 KiB
C++

/*******************************************************************/
/* dialog_pad_properties.cpp: Pad editing functions and dialog box */
/* see also dialog_pad_properties.xxx (built with wxFormBuilder) */
/*******************************************************************/
#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "trigo.h"
/* Local variables */
static wxString Current_PadNetName;
#define NBSHAPES 4
int CodeShape[NBSHAPES] = /* Pad shapes. */
{
PAD_CIRCLE, PAD_OVAL, PAD_RECT, PAD_TRAPEZOID
};
#define NBTYPES 4
int CodeType[NBTYPES] =
{
PAD_STANDARD, PAD_SMD, PAD_CONN, PAD_HOLE_NOT_PLATED
};
// Default mask layers for pads according to the pad type
static long Std_Pad_Layers[NBTYPES] =
{
// PAD_STANDARD:
PAD_STANDARD_DEFAULT_LAYERS,
// PAD_CONN:
PAD_CONN_DEFAULT_LAYERS,
// PAD_SMD:
PAD_SMD_DEFAULT_LAYERS,
//PAD_HOLE_NOT_PLATED:
PAD_HOLE_NOT_PLATED_DEFAULT_LAYERS
};
#include "dialog_pad_properties_base.h"
/********************************************************************/
/* class DIALOG_PAD_PROPERTIES, derived from DIALOG_PAD_PROPERTIES_BASE, */
/* created by wxFormBuilder */
/********************************************************************/
class DIALOG_PAD_PROPERTIES : public DIALOG_PAD_PROPERTIES_BASE
{
private:
WinEDA_BasePcbFrame* m_Parent;
D_PAD* m_CurrentPad;
BOARD * m_Board;
public:
DIALOG_PAD_PROPERTIES( WinEDA_BasePcbFrame* parent, D_PAD* Pad );
private:
void InitDialog( );
void OnPadShapeSelection( wxCommandEvent& event );
void OnDrillShapeSelected( wxCommandEvent& event );
void PadOrientEvent( wxCommandEvent& event );
void PadTypeSelected( wxCommandEvent& event );
void PadPropertiesAccept( wxCommandEvent& event );
void SetPadLayersList( long layer_mask );
void OnCancelButtonClick( wxCommandEvent& event );
};
/*******************************************************************************************/
DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES( WinEDA_BasePcbFrame* parent, D_PAD* Pad ) :
DIALOG_PAD_PROPERTIES_BASE( parent )
/*******************************************************************************************/
{
m_Parent = parent;
m_CurrentPad = Pad;
m_Board = m_Parent->GetBoard();
if( m_CurrentPad )
{
Current_PadNetName = m_CurrentPad->GetNetname();
g_Current_PadName = m_CurrentPad->ReturnStringPadName();
}
InitDialog( );
if( GetSizer() )
{
GetSizer()->SetSizeHints( this );
}
Center();
}
void WinEDA_BasePcbFrame::InstallPadOptionsFrame( D_PAD* Pad )
{
DIALOG_PAD_PROPERTIES dlg( this, Pad );
dlg.ShowModal();
}
/**************************************************************/
void DIALOG_PAD_PROPERTIES::InitDialog( )
/**************************************************************/
{
int tmp;
wxCommandEvent cmd_event;
int internalUnits = m_Parent->m_InternalUnits;
wxString msg;
SetFocus(); // Required under wxGTK if we want to demiss the dialog with the ESC key
m_PadNumCtrl->SetValue( g_Current_PadName );
m_PadNetNameCtrl->SetValue( Current_PadNetName );
D_PAD* pad = m_CurrentPad;
if( pad == NULL )
pad = &g_Pad_Master;
// Display current unit name in dialog:
m_PadPosX_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadPosY_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadDrill_X_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadDrill_Y_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeSizeX_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeSizeY_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetX_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetY_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeDeltaX_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeDeltaY_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_NetClearanceUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
// Display current pad masks clearances units
m_NetClearanceUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, pad->m_Pos.x, internalUnits );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, pad->m_Pos.y, internalUnits );
PutValueInLocalUnits( *m_PadDrill_X_Ctrl, pad->m_Drill.x, internalUnits );
PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, pad->m_Drill.y, internalUnits );
PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, pad->m_Size.x, internalUnits );
PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, pad->m_Size.y, internalUnits );
PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, pad->m_Offset.x, internalUnits );
PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, pad->m_Offset.y, internalUnits );
PutValueInLocalUnits( *m_ShapeDelta_X_Ctrl, pad->m_DeltaSize.x, internalUnits );
PutValueInLocalUnits( *m_ShapeDelta_Y_Ctrl, pad->m_DeltaSize.y, internalUnits );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, pad->m_LocalClearance, internalUnits );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, pad->m_LocalSolderMaskMargin, internalUnits );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, pad->m_LocalSolderPasteMargin, internalUnits );
if( pad->m_LocalSolderPasteMargin == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT("-") + m_SolderPasteMarginCtrl->GetValue() );
msg.Printf( wxT( "%.1f" ), pad->m_LocalSolderPasteMarginRatio * 100.0 );
if( pad->m_LocalSolderPasteMarginRatio == 0.0 &&
msg[0] == '0') // Sometimes Printf add a sign if the value is small
m_SolderPasteMarginRatioCtrl->SetValue( wxT("-") + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
if( m_CurrentPad )
{
MODULE* Module = (MODULE*) m_CurrentPad->GetParent();
tmp = m_CurrentPad->m_Orient - Module->m_Orient;
}
else
tmp = g_Pad_Master.m_Orient;
msg.Clear();
msg << tmp;
m_PadOrientCtrl->SetValue( msg );
// Pad Orient
switch( tmp )
{
case 0:
m_PadOrient->SetSelection( 0 );
m_PadOrientCtrl->Enable( false );
break;
case - 2700:
case 900:
m_PadOrient->SetSelection( 1 );
m_PadOrientCtrl->Enable( false );
break;
case - 900:
case 2700:
m_PadOrient->SetSelection( 2 );
m_PadOrientCtrl->Enable( false );
break;
case 1800:
case - 1800:
m_PadOrient->SetSelection( 3 );
m_PadOrientCtrl->Enable( false );
break;
default:
m_PadOrient->SetSelection( 4 );
break;
}
switch( pad->m_PadShape )
{
default:
case PAD_CIRCLE:
m_PadShape->SetSelection( 0 );
break;
case PAD_OVAL:
m_PadShape->SetSelection( 1 );
break;
case PAD_RECT:
m_PadShape->SetSelection( 2 );
break;
case PAD_TRAPEZOID:
m_PadShape->SetSelection( 3 );
break;
}
cmd_event.SetId( m_PadShape->GetSelection() );
OnPadShapeSelection( cmd_event );
// Selection du type
tmp = pad->m_Attribut;
m_PadType->SetSelection( 0 );
for( int ii = 0; ii < NBTYPES; ii++ )
{
if( CodeType[ii] == tmp )
{
m_PadType->SetSelection( ii ); break;
}
}
if( pad->m_DrillShape != PAD_OVAL )
m_DrillShapeCtrl->SetSelection( 0 );
else
m_DrillShapeCtrl->SetSelection( 1 );
cmd_event.SetId( m_DrillShapeCtrl->GetSelection() );
OnDrillShapeSelected( cmd_event );
// Set layers used by this pad: :
if( m_CurrentPad )
SetPadLayersList( m_CurrentPad->m_Masque_Layer );
else
{
cmd_event.SetId( m_PadType->GetSelection() );
PadTypeSelected( cmd_event );
}
// Setup layers names from board
m_PadLayerCu->SetLabel(m_Board->GetLayerName(LAYER_N_BACK));
m_PadLayerCmp->SetLabel(m_Board->GetLayerName(LAYER_N_FRONT));
m_PadLayerAdhCmp->SetLabel(m_Board->GetLayerName( ADHESIVE_N_FRONT ));
m_PadLayerAdhCu->SetLabel(m_Board->GetLayerName( ADHESIVE_N_BACK ));
m_PadLayerPateCmp->SetLabel(m_Board->GetLayerName( SOLDERPASTE_N_FRONT ));
m_PadLayerPateCu->SetLabel(m_Board->GetLayerName(SOLDERPASTE_N_BACK ));
m_PadLayerSilkCmp->SetLabel(m_Board->GetLayerName( SILKSCREEN_N_FRONT ));
m_PadLayerSilkCu->SetLabel(m_Board->GetLayerName( SILKSCREEN_N_BACK ));
m_PadLayerMaskCmp->SetLabel(m_Board->GetLayerName( SOLDERMASK_N_FRONT ));
m_PadLayerMaskCu->SetLabel(m_Board->GetLayerName( SOLDERMASK_N_BACK ));
m_PadLayerECO1->SetLabel(m_Board->GetLayerName( ECO1_N ));
m_PadLayerECO2->SetLabel(m_Board->GetLayerName( ECO2_N));
m_PadLayerDraft->SetLabel(m_Board->GetLayerName( DRAW_N ));
}
/*********************************************************************/
void DIALOG_PAD_PROPERTIES::OnPadShapeSelection( wxCommandEvent& event )
/*********************************************************************/
{
switch( m_PadShape->GetSelection() )
{
case 0: //CIRCLE:
m_ShapeDelta_X_Ctrl->Enable( false );
m_ShapeDelta_Y_Ctrl->Enable( false );
m_ShapeSize_Y_Ctrl->Enable( false );
break;
case 1: //OVALE:
m_ShapeDelta_X_Ctrl->Enable( false );
m_ShapeDelta_Y_Ctrl->Enable( false );
m_ShapeSize_Y_Ctrl->Enable( true );
break;
case 2: // PAD_RECT:
m_ShapeDelta_X_Ctrl->Enable( false );
m_ShapeDelta_Y_Ctrl->Enable( false );
m_ShapeSize_Y_Ctrl->Enable( true );
break;
case 3: //TRAPEZE:
m_ShapeDelta_X_Ctrl->Enable( true );
m_ShapeDelta_Y_Ctrl->Enable( true );
m_ShapeSize_Y_Ctrl->Enable( true );
break;
}
}
/**********************************************************************/
void DIALOG_PAD_PROPERTIES::OnDrillShapeSelected( wxCommandEvent& event )
/**********************************************************************/
{
if ( (m_PadType->GetSelection() == 1) || (m_PadType->GetSelection() == 2) )
{ // pad type = SMD or CONN: no hole allowed
m_PadDrill_X_Ctrl->Enable( false );
m_PadDrill_Y_Ctrl->Enable( false );
return;
}
switch( m_DrillShapeCtrl->GetSelection() )
{
case 0: //CIRCLE:
m_PadDrill_X_Ctrl->Enable( true );
m_PadDrill_Y_Ctrl->Enable( false );
break;
case 1: //OVALE:
m_PadDrill_X_Ctrl->Enable( true );
m_PadDrill_Y_Ctrl->Enable( true );
break;
}
}
/*******************************************************************/
void DIALOG_PAD_PROPERTIES::PadOrientEvent( wxCommandEvent& event )
/********************************************************************/
{
switch( m_PadOrient->GetSelection() )
{
case 0:
m_PadOrientCtrl->SetValue( wxT( "0" ) );
m_PadOrientCtrl->Enable( false );
break;
case 1:
m_PadOrientCtrl->SetValue( wxT( "900" ) );
m_PadOrientCtrl->Enable( false );
break;
case 2:
m_PadOrientCtrl->SetValue( wxT( "2700" ) );
m_PadOrientCtrl->Enable( false );
break;
case 3:
m_PadOrientCtrl->SetValue( wxT( "1800" ) );
m_PadOrientCtrl->Enable( false );
break;
default:
m_PadOrientCtrl->Enable( true );
break;
}
}
/*****************************************************************/
void DIALOG_PAD_PROPERTIES::PadTypeSelected( wxCommandEvent& event )
/*****************************************************************/
/* Adjust the better mask layer according to the selected pad type
*/
{
long layer_mask;
int ii;
ii = m_PadType->GetSelection();
if( (ii < 0) || ( ii >= NBTYPES) )
ii = 0;
layer_mask = Std_Pad_Layers[ii];
SetPadLayersList( layer_mask );
// Enable/disable drill dialog items:
event.SetId(m_DrillShapeCtrl->GetSelection());
OnDrillShapeSelected( event );
}
/****************************************************************/
void DIALOG_PAD_PROPERTIES::SetPadLayersList( long layer_mask )
/****************************************************************/
/** SetPadLayersList
* Update the CheckBoxes state in pad layers list,
* @param layer_mask = pad layer mask (ORed layers bit mask)
*/
{
m_PadLayerCu->SetValue( ( layer_mask & LAYER_BACK ) );
m_PadLayerCmp->SetValue( ( layer_mask & LAYER_FRONT ) );
m_PadLayerAdhCmp->SetValue( ( layer_mask & ADHESIVE_LAYER_FRONT ) );
m_PadLayerAdhCu->SetValue( ( layer_mask & ADHESIVE_LAYER_BACK ) );
m_PadLayerPateCmp->SetValue( ( layer_mask & SOLDERPASTE_LAYER_FRONT ) );
m_PadLayerPateCu->SetValue( ( layer_mask & SOLDERPASTE_LAYER_BACK ) );
m_PadLayerSilkCmp->SetValue( ( layer_mask & SILKSCREEN_LAYER_FRONT ) );
m_PadLayerSilkCu->SetValue( ( layer_mask & SILKSCREEN_LAYER_BACK ) );
m_PadLayerMaskCmp->SetValue( ( layer_mask & SOLDERMASK_LAYER_FRONT ) );
m_PadLayerMaskCu->SetValue( ( layer_mask & SOLDERMASK_LAYER_BACK ) );
m_PadLayerECO1->SetValue( ( layer_mask & ECO1_LAYER ) );
m_PadLayerECO2->SetValue( ( layer_mask & ECO2_LAYER ) );
m_PadLayerDraft->SetValue( ( layer_mask & DRAW_LAYER ) );
}
/*************************************************************************/
void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
/*************************************************************************/
/* Updates the different parameters for the component being edited.
*/
{
long PadLayerMask;
bool RastnestIsChanged = false;
int internalUnits = m_Parent->m_InternalUnits;
wxString msg;
g_Pad_Master.m_Attribut = CodeType[m_PadType->GetSelection()];
g_Pad_Master.m_PadShape = CodeShape[m_PadShape->GetSelection()];
// Read pad clearances values:
g_Pad_Master.m_LocalClearance = ReturnValueFromTextCtrl( *m_NetClearanceValueCtrl,
internalUnits );
g_Pad_Master.m_LocalSolderMaskMargin = ReturnValueFromTextCtrl( *m_SolderMaskMarginCtrl,
internalUnits );
g_Pad_Master.m_LocalSolderPasteMargin = ReturnValueFromTextCtrl( *m_SolderPasteMarginCtrl,
internalUnits );
double dtmp = 0.0;
msg = m_SolderPasteMarginRatioCtrl->GetValue();
msg.ToDouble( &dtmp );
// A margin ratio de -50% means no paste on a pad, the ratio must be >= 50 %
if( dtmp < -50 )
dtmp = -50;
if( dtmp > +100 )
dtmp = +100;
g_Pad_Master.m_LocalSolderPasteMarginRatio = dtmp / 100;
// Read pad position:
g_Pad_Master.m_Pos.x = ReturnValueFromTextCtrl( *m_PadPosition_X_Ctrl, internalUnits );
g_Pad_Master.m_Pos.y = ReturnValueFromTextCtrl( *m_PadPosition_Y_Ctrl, internalUnits );
g_Pad_Master.m_Pos0 = g_Pad_Master.m_Pos;
// Read pad drill:
g_Pad_Master.m_Drill.x = ReturnValueFromTextCtrl( *m_PadDrill_X_Ctrl, internalUnits );
g_Pad_Master.m_Drill.y = ReturnValueFromTextCtrl( *m_PadDrill_Y_Ctrl, internalUnits );
if( m_DrillShapeCtrl->GetSelection() == 0 )
{
g_Pad_Master.m_DrillShape = PAD_CIRCLE;
g_Pad_Master.m_Drill.y = g_Pad_Master.m_Drill.x;
}
else
g_Pad_Master.m_DrillShape = PAD_OVAL;
// Read pad shape size:
g_Pad_Master.m_Size.x = ReturnValueFromTextCtrl( *m_ShapeSize_X_Ctrl, internalUnits );
g_Pad_Master.m_Size.y = ReturnValueFromTextCtrl( *m_ShapeSize_Y_Ctrl, internalUnits );
if( g_Pad_Master.m_PadShape == PAD_CIRCLE )
g_Pad_Master.m_Size.y = g_Pad_Master.m_Size.x;
// Read pad shape delta size:
g_Pad_Master.m_DeltaSize.x = ReturnValueFromTextCtrl( *m_ShapeDelta_X_Ctrl, internalUnits );
g_Pad_Master.m_DeltaSize.y = ReturnValueFromTextCtrl( *m_ShapeDelta_Y_Ctrl, internalUnits );
// Read pad shape offset:
g_Pad_Master.m_Offset.x = ReturnValueFromTextCtrl( *m_ShapeOffset_X_Ctrl, internalUnits );
g_Pad_Master.m_Offset.y = ReturnValueFromTextCtrl( *m_ShapeOffset_Y_Ctrl, internalUnits );
long orient_value = 0;
msg = m_PadOrientCtrl->GetValue();
msg.ToLong( &orient_value );
g_Pad_Master.m_Orient = orient_value;
g_Current_PadName = m_PadNumCtrl->GetValue().Left( 4 );
Current_PadNetName = m_PadNetNameCtrl->GetValue();
// Clear some values, according to the pad type and shape
switch( g_Pad_Master.m_PadShape )
{
case PAD_CIRCLE:
g_Pad_Master.m_Offset = wxSize( 0, 0 );
g_Pad_Master.m_DeltaSize = wxSize( 0, 0 );
g_Pad_Master.m_Size.y = g_Pad_Master.m_Size.x;
break;
case PAD_RECT:
g_Pad_Master.m_DeltaSize = wxSize( 0, 0 );
break;
case PAD_OVAL:
g_Pad_Master.m_DeltaSize = wxSize( 0, 0 );
break;
case PAD_TRAPEZOID:
break;
}
switch( g_Pad_Master.m_Attribut )
{
case PAD_STANDARD:
break;
case PAD_CONN:
case PAD_SMD:
g_Pad_Master.m_Offset = wxSize( 0, 0 );
g_Pad_Master.m_Drill = wxSize( 0, 0 );
break;
case PAD_HOLE_NOT_PLATED:
break;
default:
DisplayError( this, wxT( "Error: unknown pad type" ) );
break;
}
PadLayerMask = 0;
if( m_PadLayerCu->GetValue() )
PadLayerMask |= LAYER_BACK;
if( m_PadLayerCmp->GetValue() )
PadLayerMask |= LAYER_FRONT;
if( ( PadLayerMask & (LAYER_BACK | LAYER_FRONT) ) == (LAYER_BACK | LAYER_FRONT) )
PadLayerMask |= ALL_CU_LAYERS;
if( m_PadLayerAdhCmp->GetValue() )
PadLayerMask |= ADHESIVE_LAYER_FRONT;
if( m_PadLayerAdhCu->GetValue() )
PadLayerMask |= ADHESIVE_LAYER_BACK;
if( m_PadLayerPateCmp->GetValue() )
PadLayerMask |= SOLDERPASTE_LAYER_FRONT;
if( m_PadLayerPateCu->GetValue() )
PadLayerMask |= SOLDERPASTE_LAYER_BACK;
if( m_PadLayerSilkCmp->GetValue() )
PadLayerMask |= SILKSCREEN_LAYER_FRONT;
if( m_PadLayerSilkCu->GetValue() )
PadLayerMask |= SILKSCREEN_LAYER_BACK;
if( m_PadLayerMaskCmp->GetValue() )
PadLayerMask |= SOLDERMASK_LAYER_FRONT;
if( m_PadLayerMaskCu->GetValue() )
PadLayerMask |= SOLDERMASK_LAYER_BACK;
if( m_PadLayerECO1->GetValue() )
PadLayerMask |= ECO1_LAYER;
if( m_PadLayerECO2->GetValue() )
PadLayerMask |= ECO2_LAYER;
if( m_PadLayerDraft->GetValue() )
PadLayerMask |= DRAW_LAYER;
/* Test for incorrect values */
if( (g_Pad_Master.m_Size.x < g_Pad_Master.m_Drill.x)
|| (g_Pad_Master.m_Size.y < g_Pad_Master.m_Drill.y) )
{
DisplayError( this, _( "Incorrect value for pad drill: pad drill bigger than pad size" ) );
return;
}
int padlayers_mask = PadLayerMask & (LAYER_BACK | LAYER_FRONT);
if( padlayers_mask == 0 )
{
if( g_Pad_Master.m_Drill.x || g_Pad_Master.m_Drill.y )
{
DisplayError( this, _( "Error: pad is not on a copper layer and has a hole" ) );
return;
}
}
if( ( g_Pad_Master.m_Size.x / 2 <= ABS( g_Pad_Master.m_Offset.x ) )
|| ( g_Pad_Master.m_Size.y / 2 <= ABS( g_Pad_Master.m_Offset.y ) ) )
{
DisplayError( this, _( "Incorrect value for pad offset" ) );
return;
}
g_Pad_Master.m_Masque_Layer = PadLayerMask;
if( m_CurrentPad ) // Set current Pad parameters
{
MODULE* Module = (MODULE*) m_CurrentPad->GetParent();
m_Parent->SaveCopyInUndoList( Module, UR_CHANGED );
Module->m_LastEdit_Time = time( NULL );
// redraw the area where the pad was, without pad (delete pad on screen)
m_CurrentPad->m_Flags |= DO_NOT_DRAW;
m_Parent->DrawPanel->PostDirtyRect( m_CurrentPad->GetBoundingBox() );
m_CurrentPad->m_Flags &= ~DO_NOT_DRAW;
// Update values
m_CurrentPad->m_PadShape = g_Pad_Master.m_PadShape;
m_CurrentPad->m_Attribut = g_Pad_Master.m_Attribut;
if( m_CurrentPad->m_Pos != g_Pad_Master.m_Pos )
{
m_CurrentPad->m_Pos = g_Pad_Master.m_Pos;
RastnestIsChanged = true;
}
/* compute the pos 0 value, i.e. pad position for module orient = 0 i.e.
* refer to module origin (module position) */
m_CurrentPad->m_Pos0 = m_CurrentPad->m_Pos;
m_CurrentPad->m_Pos0 -= Module->m_Pos;
m_CurrentPad->m_Orient = g_Pad_Master.m_Orient + Module->m_Orient;
RotatePoint( &m_CurrentPad->m_Pos0.x, &m_CurrentPad->m_Pos0.y, -Module->m_Orient );
m_CurrentPad->m_Size = g_Pad_Master.m_Size;
m_CurrentPad->m_DeltaSize = g_Pad_Master.m_DeltaSize;
m_CurrentPad->m_Drill = g_Pad_Master.m_Drill;
m_CurrentPad->m_DrillShape = g_Pad_Master.m_DrillShape;
m_CurrentPad->m_Offset = g_Pad_Master.m_Offset;
if( m_CurrentPad->m_Masque_Layer != g_Pad_Master.m_Masque_Layer )
{
RastnestIsChanged = true;
m_CurrentPad->m_Masque_Layer = g_Pad_Master.m_Masque_Layer;
}
m_CurrentPad->SetPadName( g_Current_PadName );
if( m_CurrentPad->GetNetname() != Current_PadNetName )
{
if( Current_PadNetName.IsEmpty() )
{
m_CurrentPad->SetNet( 0 );
m_CurrentPad->SetNetname( Current_PadNetName );
}
else
{
const NETINFO_ITEM* net = m_Parent->GetBoard()->FindNet( Current_PadNetName );
if( net )
{
RastnestIsChanged = true;
m_CurrentPad->SetNetname( Current_PadNetName );
m_CurrentPad->SetNet( net->GetNet() );
}
else
DisplayError( NULL, _( "Unknown netname, no change" ) );
}
}
m_CurrentPad->m_LocalClearance = g_Pad_Master.m_LocalClearance;
m_CurrentPad->m_LocalSolderMaskMargin = g_Pad_Master.m_LocalSolderMaskMargin;
m_CurrentPad->m_LocalSolderPasteMargin = g_Pad_Master.m_LocalSolderPasteMargin;
m_CurrentPad->m_LocalSolderPasteMarginRatio = g_Pad_Master.m_LocalSolderPasteMarginRatio;
m_CurrentPad->ComputeRayon();
Module->Set_Rectangle_Encadrement();
m_CurrentPad->DisplayInfo( m_Parent );
// redraw the area where the pad was
m_Parent->DrawPanel->PostDirtyRect( m_CurrentPad->GetBoundingBox() );
m_Parent->OnModify();
}
EndModal( wxID_OK );
if( RastnestIsChanged ) // The net ratsnest must be recalculated
m_Parent->GetBoard()->m_Status_Pcb = 0;
}
/*********************************************************************/
void DIALOG_PAD_PROPERTIES::OnCancelButtonClick( wxCommandEvent& event )
/*********************************************************************/
{
EndModal( wxID_CANCEL );
}