kicad/pcbnew/router/pns_meander.h

475 lines
12 KiB
C++

/*
* KiRouter - a push-and-(sometimes-)shove PCB router
*
* Copyright (C) 2013-2015 CERN
* Copyright (C) 2016-2021 KiCad Developers, see AUTHORS.txt for contributors.
*
* @author Tomasz Wlostowski <tomasz.wlostowski@cern.ch>
*
* This program is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __PNS_MEANDER_H
#define __PNS_MEANDER_H
#include <math/vector2d.h>
#include <geometry/shape.h>
#include <geometry/shape_line_chain.h>
namespace PNS {
class MEANDER_PLACER_BASE;
class MEANDERED_LINE;
///< Shapes of available meanders.
enum MEANDER_TYPE {
MT_SINGLE, // _|^|_, single-sided
MT_START, // _|^|
MT_FINISH, // |^|_
MT_TURN, // |^| or |_|
MT_CHECK_START, // try fitting a start type, but don't produce a line
MT_CHECK_FINISH, // try fitting a finish type, but don't produce a line
MT_CORNER, // line corner
MT_EMPTY // no meander (straight line)
};
///< Meander corner shape.
enum MEANDER_STYLE {
MEANDER_STYLE_ROUND = 1, // rounded (90 degree arc)
MEANDER_STYLE_CHAMFER // chamfered (45 degree segment)
};
/**
* Dimensions for the meandering algorithm.
*/
class MEANDER_SETTINGS
{
public:
MEANDER_SETTINGS()
{
m_minAmplitude = 100000;
m_maxAmplitude = 1000000;
m_step = 50000;
m_lenPadToDie = 0;
m_spacing = 600000;
m_targetLength = 100000000;
m_targetSkew = 0;
m_cornerStyle = MEANDER_STYLE_ROUND;
m_cornerRadiusPercentage = 100;
m_lengthTolerance = 100000;
}
///< Minimum meandering amplitude.
int m_minAmplitude;
///< Maximum meandering amplitude.
int m_maxAmplitude;
///< Meandering period/spacing (see dialog picture for explanation).
int m_spacing;
///< Amplitude/spacing adjustment step.
int m_step;
///< Length PadToDie.
int m_lenPadToDie;
///< Desired length of the tuned line/diff pair (this is in nm, so allow more than board width).
long long int m_targetLength;
///< Type of corners for the meandered line.
MEANDER_STYLE m_cornerStyle;
///< Rounding percentage (0 - 100).
int m_cornerRadiusPercentage;
///< Allowable tuning error.
int m_lengthTolerance;
///< Target skew value for diff pair de-skewing.
int m_targetSkew;
};
/**
* The geometry of a single meander.
*/
class MEANDER_SHAPE
{
public:
/**
* @param aPlacer the meander placer instance.
* @param aWidth width of the meandered line.
* @param aIsDual when true, the shape contains two meandered
* lines at a given offset (diff pairs).
*/
MEANDER_SHAPE( MEANDER_PLACER_BASE* aPlacer, int aWidth, bool aIsDual = false ) :
m_placer( aPlacer ),
m_dual( aIsDual ),
m_width( aWidth ),
m_baselineOffset( 0 )
{
// Do not leave uninitialized members, and keep static analyzer quiet:
m_type = MT_SINGLE;
m_amplitude = 0;
m_side = false;
m_baseIndex = 0;
m_currentTarget = NULL;
m_meanCornerRadius = 0;
}
/**
* Set the type of the meander.
*/
void SetType( MEANDER_TYPE aType )
{
m_type = aType;
}
/**
* @return the type of the meander.
*/
MEANDER_TYPE Type() const
{
return m_type;
}
/**
* Set an auxiliary index of the segment being meandered in its original LINE.
*/
void SetBaseIndex( int aIndex )
{
m_baseIndex = aIndex;
}
/**
* @return auxiliary index of the segment being meandered in its original LINE.
*/
int BaseIndex() const
{
return m_baseIndex;
}
/**
* @return the amplitude of the meander shape.
*/
int Amplitude() const
{
return m_amplitude;
}
/**
* Create a dummy meander shape representing a line corner. Used to define
* the starts/ends of meandered segments.
*
* @param aP1 corner point of the 1st line.
* @param aP2 corner point of the 2nd line (if m_dual == true).
*/
void MakeCorner( VECTOR2I aP1, VECTOR2I aP2 = VECTOR2I( 0, 0 ) );
/**
* Change the amplitude of the meander shape to aAmpl and recalculates the resulting
* line chain.
*
* @param aAmpl new amplitude.
*/
void Resize( int aAmpl );
/**
* Recalculate the line chain representing the meander's shape.
*/
void Recalculate();
/**
* @return true if the shape represents 2 parallel lines (diff pair).
*/
bool IsDual() const
{
return m_dual;
}
/**
* @return true if the meander is to the right of its base segment.
*/
bool Side() const
{
return m_side;
}
/**
* @return end vertex of the base segment of the meander shape.
*/
VECTOR2I End() const
{
return m_clippedBaseSeg.B;
}
/**
* @return the line chain representing the shape of the meander.
*/
const SHAPE_LINE_CHAIN& CLine( int aShape ) const
{
return m_shapes[aShape];
}
/**
* Replace the meander with straight bypass line(s), effectively clearing it.
*/
void MakeEmpty();
/**
* Attempt to fit a meander of a given type onto a segment, avoiding collisions with other
* board features.
*
* @param aType type of meander shape.
* @param aSeg base segment for meandering.
* @param aP start point of the meander.
* @param aSide side of aSeg to put the meander on (true = right).
* @return true on success.
*/
bool Fit( MEANDER_TYPE aType, const SEG& aSeg, const VECTOR2I& aP, bool aSide );
/**
* Return the base segment the meander was fitted to.
*
* @return the base segment.
*/
const SEG& BaseSegment() const
{
return m_clippedBaseSeg;
}
/**
* @return length of the base segment for the meander (i.e.the minimum tuned length).
*/
int BaselineLength() const;
/**
* @return the length of the fitted line chain.
*/
int MaxTunableLength() const;
/**
* @return the current meandering settings.
*/
const MEANDER_SETTINGS& Settings() const;
/**
* @return width of the meandered line.
*/
int Width() const
{
return m_width;
}
/**
* Set the parallel offset between the base segment and the meandered line. Used for
* dual meanders (diff pair) only.
*
* @param aOffset the offset.
*/
void SetBaselineOffset( int aOffset )
{
m_baselineOffset = aOffset;
}
private:
friend class MEANDERED_LINE;
///< Start turtle drawing
void start( SHAPE_LINE_CHAIN* aTarget, const VECTOR2D& aWhere, const VECTOR2D& aDir );
///< Move turtle forward by \a aLength.
void forward( int aLength );
///< Turn the turtle by \a aAngle
void turn( int aAngle );
///< Tell the turtle to draw a mitered corner of given radius and turn direction.
void miter( int aRadius, bool aSide );
///< Tell the turtle to draw an U-like shape.
void uShape( int aSides, int aCorner, int aTop );
///< Generate a 90-degree circular arc.
SHAPE_LINE_CHAIN makeMiterShape( VECTOR2D aP, VECTOR2D aDir, bool aSide );
///< Produce a meander shape of given type.
SHAPE_LINE_CHAIN genMeanderShape( VECTOR2D aP, VECTOR2D aDir, bool aSide, MEANDER_TYPE aType,
int aAmpl, int aBaselineOffset = 0 );
///< Recalculate the clipped baseline after the parameters of the meander have been changed.
void updateBaseSegment();
///< Return sanitized corner radius value.
int cornerRadius() const;
///< Return sanitized spacing value.
int spacing() const;
///< The type of meander.
MEANDER_TYPE m_type;
///< The placer that placed this meander.
MEANDER_PLACER_BASE* m_placer;
///< Dual or single line.
bool m_dual;
///< Width of the line.
int m_width;
///< Amplitude of the meander.
int m_amplitude;
///< Offset wrs the base segment (dual only).
int m_baselineOffset;
///< Average radius of meander corners (for correction of DP meanders).
int m_meanCornerRadius;
///< First point of the meandered line.
VECTOR2I m_p0;
///< Base segment (unclipped).
SEG m_baseSeg;
///< Base segment (clipped).
SEG m_clippedBaseSeg;
///< Side (true = right).
bool m_side;
///< The actual shapes (0 used for single, both for dual).
SHAPE_LINE_CHAIN m_shapes[2];
///< Index of the meandered segment in the base line.
int m_baseIndex;
///< The current turtle direction.
VECTOR2D m_currentDir;
///< The current turtle position.
VECTOR2D m_currentPos;
///< The line the turtle is drawing on.
SHAPE_LINE_CHAIN* m_currentTarget;
};
/**
* Represent a set of meanders fitted over a single or two lines.
*/
class MEANDERED_LINE
{
public:
MEANDERED_LINE()
{
// Do not leave uninitialized members, and keep static analyzer quiet:
m_placer = NULL;
m_dual = false;
m_width = 0;
m_baselineOffset = 0;
}
/**
* @param aPlacer the meander placer instance
* @param aIsDual when true, the meanders are generated for two coupled lines
*/
MEANDERED_LINE( MEANDER_PLACER_BASE* aPlacer, bool aIsDual = false ) :
m_placer( aPlacer ),
m_dual( aIsDual )
{
// Do not leave uninitialized members, and keep static analyzer quiet:
m_width = 0;
m_baselineOffset = 0;
}
~MEANDERED_LINE()
{
Clear();
}
/**
* Create a dummy meander shape representing a line corner. Used to define the starts/ends
* of meandered segments.
*
* @param aA corner point of the 1st line.
* @param aB corner point of the 2nd line (if m_dual == true).
*/
void AddCorner( const VECTOR2I& aA, const VECTOR2I& aB = VECTOR2I( 0, 0 ) );
/**
* Add a new meander shape to the meandered line.
*
* @param aShape the meander shape to add
*/
void AddMeander( MEANDER_SHAPE* aShape );
/**
* Clear the line geometry, removing all corners and meanders.
*/
void Clear();
/**
* Set the line width.
*/
void SetWidth( int aWidth )
{
m_width = aWidth;
}
/**
* Fit maximum amplitude meanders on a given segment and adds to the current line.
*
* @param aSeg the base segment to meander.
* @param aBaseIndex index of the base segment in the original line.
*/
void MeanderSegment( const SEG& aSeg, int aBaseIndex = 0 );
/// @copydoc MEANDER_SHAPE::SetBaselineOffset()
void SetBaselineOffset( int aOffset )
{
m_baselineOffset = aOffset;
}
/**
* @return set of meander shapes for this line.
*/
std::vector<MEANDER_SHAPE*>& Meanders()
{
return m_meanders;
}
/**
* Check if the given shape is intersecting with any other meander in the current line.
*
* @param aShape the shape to check.
* @param aClearance clearance value.
* @return true, if the meander shape is not colliding.
*/
bool CheckSelfIntersections( MEANDER_SHAPE* aShape, int aClearance );
/**
* @return the current meandering settings.
*/
const MEANDER_SETTINGS& Settings() const;
private:
VECTOR2I m_last;
MEANDER_PLACER_BASE* m_placer;
std::vector<MEANDER_SHAPE*> m_meanders;
bool m_dual;
int m_width;
int m_baselineOffset;
};
}
#endif // __PNS_MEANDER_H