kicad/pcbnew/dialog_pad_properties.cpp

888 lines
28 KiB
C++

/*******************************************************************/
/* dialog_pad_properties.cpp: Pad editing functions and dialog box */
/* see also dialog_pad_properties.xxx (built with wxFormBuilder) */
/*******************************************************************/
#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "trigo.h"
#include <wx/dcbuffer.h>
#define NBSHAPES 4
int CodeShape[NBSHAPES] = // list of pad shapes.
{
PAD_CIRCLE, PAD_OVAL, PAD_RECT, PAD_TRAPEZOID
};
#define NBTYPES 4
int CodeType[NBTYPES] =
{
PAD_STANDARD, PAD_SMD, PAD_CONN, PAD_HOLE_NOT_PLATED
};
// Default mask layers setup for pads according to the pad type
static long Std_Pad_Layers[NBTYPES] =
{
// PAD_STANDARD:
PAD_STANDARD_DEFAULT_LAYERS,
// PAD_CONN:
PAD_CONN_DEFAULT_LAYERS,
// PAD_SMD:
PAD_SMD_DEFAULT_LAYERS,
//PAD_HOLE_NOT_PLATED:
PAD_HOLE_NOT_PLATED_DEFAULT_LAYERS
};
#include "dialog_pad_properties_base.h"
extern int ChangeSideMaskLayer( int masque );
/**
* class DIALOG_PAD_PROPERTIES, derived from DIALOG_PAD_PROPERTIES_BASE,
* created by wxFormBuilder
*/
class DIALOG_PAD_PROPERTIES : public DIALOG_PAD_PROPERTIES_BASE
{
private:
WinEDA_BasePcbFrame* m_Parent;
D_PAD* m_CurrentPad; // Pad currently edited
D_PAD* m_dummyPad; // a working copy used to show changes
BOARD* m_Board;
bool m_isFlipped; /* true if the parent footprint (therefore pads) is flipped (mirrored)
* in this case, some Y coordinates values must be negated
*/
bool m_canUpdate;
public:
DIALOG_PAD_PROPERTIES( WinEDA_BasePcbFrame* parent, D_PAD* Pad );
~DIALOG_PAD_PROPERTIES()
{
delete m_dummyPad;
}
private:
void initValues();
void OnPadShapeSelection( wxCommandEvent& event );
void OnDrillShapeSelected( wxCommandEvent& event );
void PadOrientEvent( wxCommandEvent& event );
void PadTypeSelected( wxCommandEvent& event );
void PadPropertiesAccept( wxCommandEvent& event );
void SetPadLayersList( long layer_mask );
void OnSetLayer( wxCommandEvent& event );
void OnCancelButtonClick( wxCommandEvent& event );
void OnPaintShowPanel( wxPaintEvent& event );
bool TransfertDataToPad( D_PAD* aPad, bool aPromptOnError = false );
void OnValuesChanged( wxCommandEvent& event );
};
void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
{
wxPaintDC dc( m_panelShowPad );
PAD_DRAWINFO drawInfo;
int color = 0;
if( m_dummyPad->m_Masque_Layer & LAYER_FRONT )
{
color = m_Board->GetVisibleElementColor( PAD_FR_VISIBLE );
}
if( m_dummyPad->m_Masque_Layer & LAYER_BACK )
{
color |= m_Board->GetVisibleElementColor( PAD_BK_VISIBLE );
}
if( color == 0 )
color = LIGHTGRAY;
drawInfo.m_Color = color;
drawInfo.m_HoleColor = DARKGRAY;
drawInfo.m_Offset = m_dummyPad->m_Pos;
drawInfo.m_Display_padnum = true;
drawInfo.m_Display_netname = true;
// Shows the local pad clearance
drawInfo.m_PadClearance = m_dummyPad->m_LocalClearance;
wxSize dc_size = dc.GetSize();
dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );
// Calculate a suitable scale to fit the available draw area
int dim = m_dummyPad->m_Size.x + ABS( m_dummyPad->m_DeltaSize.y);
if( m_dummyPad->m_LocalClearance > 0 )
dim += m_dummyPad->m_LocalClearance * 2;
double scale = (double) dc_size.x / dim;
dim = m_dummyPad->m_Size.y + ABS( m_dummyPad->m_DeltaSize.x);
if( m_dummyPad->m_LocalClearance > 0 )
dim += m_dummyPad->m_LocalClearance * 2;
double altscale = (double) dc_size.y / dim;
scale = MIN( scale, altscale );
// Give a margin
scale *= 0.7;
dc.SetUserScale( scale, scale );
#ifndef USE_WX_ZOOM
drawInfo.m_Scale = scale;
wxPoint org = ActiveScreen->m_DrawOrg;
wxPoint strt = ActiveScreen->m_StartVisu;
int pzoom = ActiveScreen->GetZoom();
ActiveScreen->m_DrawOrg = wxPoint( 0, 0 );
ActiveScreen->m_StartVisu = wxPoint( 0, 0 );
// Actual scaling factor is 10/Zoom
// We need a scale 1 , and therefore zoom = 10
ActiveScreen->SetZoom( 10 );
#endif
m_dummyPad->DrawShape( NULL, &dc, drawInfo );
#ifndef USE_WX_ZOOM
ActiveScreen->m_DrawOrg = org;
ActiveScreen->m_StartVisu = strt;
ActiveScreen->SetZoom( pzoom );
#endif
event.Skip();
}
/*******************************************************************************************/
DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES( WinEDA_BasePcbFrame* parent, D_PAD* Pad ) :
DIALOG_PAD_PROPERTIES_BASE( parent )
/*******************************************************************************************/
{
m_canUpdate = false;
m_Parent = parent;
m_CurrentPad = Pad;
m_Board = m_Parent->GetBoard();
m_dummyPad = new D_PAD( (MODULE*) NULL );
if( m_CurrentPad )
m_dummyPad->Copy( m_CurrentPad );
else
m_dummyPad->Copy( &g_Pad_Master );
initValues();
GetSizer()->SetSizeHints( this );
Center();
m_canUpdate = true;
}
void WinEDA_BasePcbFrame::InstallPadOptionsFrame( D_PAD* Pad )
{
DIALOG_PAD_PROPERTIES dlg( this, Pad );
dlg.ShowModal();
}
/***************************************/
void DIALOG_PAD_PROPERTIES::initValues()
/***************************************/
{
SetFocus(); // Required under wxGTK if we want to demiss the dialog with the ESC key
int internalUnits = m_Parent->m_InternalUnits;
wxString msg;
m_isFlipped = false;
if( m_CurrentPad )
{
MODULE* Module = (MODULE*) m_CurrentPad->GetParent();
if( Module->GetLayer() == LAYER_N_BACK )
{
m_isFlipped = true;
m_staticModuleSideValue->SetLabel( _( "Back side (footprint is mirrored)" ) );
}
msg.Printf( wxT( "%.1f" ), (double) Module->m_Orient / 10 );
m_staticModuleRotValue->SetLabel( msg );
}
if( m_isFlipped )
{
NEGATE( m_dummyPad->m_Offset.y );
NEGATE( m_dummyPad->m_DeltaSize.y );
/* flip pads layers*/
m_dummyPad->m_Masque_Layer = ChangeSideMaskLayer( m_dummyPad->m_Masque_Layer );
}
m_staticTextWarningPadFlipped->Show(m_isFlipped);
m_PadNumCtrl->SetValue( m_dummyPad->ReturnStringPadName() );
m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );
// Display current unit name in dialog:
m_PadPosX_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadPosY_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadDrill_X_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadDrill_Y_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeSizeX_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeSizeY_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetX_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetY_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_PadShapeDelta_Unit->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_NetClearanceUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
// Display current pad masks clearances units
m_NetClearanceUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->m_Pos.x, internalUnits );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->m_Pos.y, internalUnits );
PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->m_Drill.x, internalUnits );
PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->m_Drill.y, internalUnits );
PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->m_Size.x, internalUnits );
PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->m_Size.y, internalUnits );
PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->m_Offset.x, internalUnits );
PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->m_Offset.y, internalUnits );
if( m_dummyPad->m_DeltaSize.x )
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->m_DeltaSize.x, internalUnits );
m_radioBtnDeltaXdir->SetValue(true);
}
else
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->m_DeltaSize.y, internalUnits );
m_radioBtnDeltaYdir->SetValue(true);
}
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->m_LocalClearance, internalUnits );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl,
m_dummyPad->m_LocalSolderMaskMargin,
internalUnits );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl,
m_dummyPad->m_LocalSolderPasteMargin,
internalUnits );
if( m_dummyPad->m_LocalSolderPasteMargin == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
msg.Printf( wxT( "%.1f" ), m_dummyPad->m_LocalSolderPasteMarginRatio * 100.0 );
if( m_dummyPad->m_LocalSolderPasteMarginRatio == 0.0
&& msg[0] == '0' ) // Sometimes Printf add a sign if the value is small
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
if( m_CurrentPad )
{
MODULE* Module = (MODULE*) m_CurrentPad->GetParent();
m_dummyPad->m_Orient = m_CurrentPad->m_Orient - Module->m_Orient;
if( m_isFlipped )
NEGATE( m_dummyPad->m_Orient );
}
// adjust rotation agngle to -1800 to 1800 in internal units (0.1 deg)
NORMALIZE_ANGLE_180( m_dummyPad->m_Orient );
// Set layers used by this pad: :
SetPadLayersList( m_dummyPad->m_Masque_Layer );
msg.Clear();
msg << m_dummyPad->m_Orient;
m_PadOrientCtrl->SetValue( msg );
// Pad Orient
switch( m_dummyPad->m_Orient )
{
case 0:
m_PadOrient->SetSelection( 0 );
break;
case 900:
m_PadOrient->SetSelection( 1 );
break;
case - 900:
m_PadOrient->SetSelection( 2 );
break;
case 1800:
case - 1800:
m_PadOrient->SetSelection( 3 );
break;
default:
m_PadOrient->SetSelection( 4 );
break;
}
switch( m_dummyPad->m_PadShape )
{
default:
case PAD_CIRCLE:
m_PadShape->SetSelection( 0 );
break;
case PAD_OVAL:
m_PadShape->SetSelection( 1 );
break;
case PAD_RECT:
m_PadShape->SetSelection( 2 );
break;
case PAD_TRAPEZOID:
m_PadShape->SetSelection( 3 );
break;
}
msg.Printf( wxT( "%d" ), m_dummyPad->m_Orient );
m_PadOrientCtrl->SetValue( msg );
// Selection du type
m_PadType->SetSelection( 0 );
for( int ii = 0; ii < NBTYPES; ii++ )
{
if( CodeType[ii] == m_dummyPad->m_Attribut )
{
m_PadType->SetSelection( ii );
break;
}
}
if( m_dummyPad->m_DrillShape != PAD_OVAL )
m_DrillShapeCtrl->SetSelection( 0 );
else
m_DrillShapeCtrl->SetSelection( 1 );
// Setup layers names from board
m_PadLayerCu->SetLabel( m_Board->GetLayerName( LAYER_N_BACK ) );
m_PadLayerCmp->SetLabel( m_Board->GetLayerName( LAYER_N_FRONT ) );
m_PadLayerAdhCmp->SetLabel( m_Board->GetLayerName( ADHESIVE_N_FRONT ) );
m_PadLayerAdhCu->SetLabel( m_Board->GetLayerName( ADHESIVE_N_BACK ) );
m_PadLayerPateCmp->SetLabel( m_Board->GetLayerName( SOLDERPASTE_N_FRONT ) );
m_PadLayerPateCu->SetLabel( m_Board->GetLayerName( SOLDERPASTE_N_BACK ) );
m_PadLayerSilkCmp->SetLabel( m_Board->GetLayerName( SILKSCREEN_N_FRONT ) );
m_PadLayerSilkCu->SetLabel( m_Board->GetLayerName( SILKSCREEN_N_BACK ) );
m_PadLayerMaskCmp->SetLabel( m_Board->GetLayerName( SOLDERMASK_N_FRONT ) );
m_PadLayerMaskCu->SetLabel( m_Board->GetLayerName( SOLDERMASK_N_BACK ) );
m_PadLayerECO1->SetLabel( m_Board->GetLayerName( ECO1_N ) );
m_PadLayerECO2->SetLabel( m_Board->GetLayerName( ECO2_N ) );
m_PadLayerDraft->SetLabel( m_Board->GetLayerName( DRAW_N ) );
/* All init are done,
* Update some dialog widgets state (Enable/disable options):
*/
wxCommandEvent cmd_event;
OnPadShapeSelection( cmd_event );
OnDrillShapeSelected( cmd_event );
}
/*********************************************************************/
void DIALOG_PAD_PROPERTIES::OnPadShapeSelection( wxCommandEvent& event )
/*********************************************************************/
{
switch( m_PadShape->GetSelection() )
{
case 0: //CIRCLE:
m_ShapeDelta_Ctrl->Enable( false );
m_radioBtnDeltaXdir->Enable( false );
m_radioBtnDeltaYdir->Enable( false );
m_ShapeSize_Y_Ctrl->Enable( false );
break;
case 1: //OVALE:
m_ShapeDelta_Ctrl->Enable( false );
m_radioBtnDeltaXdir->Enable( false );
m_radioBtnDeltaYdir->Enable( false );
m_ShapeSize_Y_Ctrl->Enable( true );
break;
case 2: // PAD_RECT:
m_ShapeDelta_Ctrl->Enable( false );
m_radioBtnDeltaXdir->Enable( false );
m_radioBtnDeltaYdir->Enable( false );
m_ShapeSize_Y_Ctrl->Enable( true );
break;
case 3: //TRAPEZE:
m_ShapeDelta_Ctrl->Enable( true );
m_radioBtnDeltaXdir->Enable( true );
m_radioBtnDeltaYdir->Enable( true );
m_ShapeSize_Y_Ctrl->Enable( true );
break;
}
TransfertDataToPad( m_dummyPad );
m_panelShowPad->Refresh();
}
/**********************************************************************/
void DIALOG_PAD_PROPERTIES::OnDrillShapeSelected( wxCommandEvent& event )
/**********************************************************************/
{
if( (m_PadType->GetSelection() == 1) || (m_PadType->GetSelection() == 2) )
{
// pad type = SMD or CONN: no hole allowed
m_PadDrill_X_Ctrl->Enable( false );
m_PadDrill_Y_Ctrl->Enable( false );
}
else
{
switch( m_DrillShapeCtrl->GetSelection() )
{
case 0: //CIRCLE:
m_PadDrill_X_Ctrl->Enable( true );
m_PadDrill_Y_Ctrl->Enable( false );
break;
case 1: //OVALE:
m_PadDrill_X_Ctrl->Enable( true );
m_PadDrill_Y_Ctrl->Enable( true );
break;
}
}
TransfertDataToPad( m_dummyPad );
m_panelShowPad->Refresh();
}
/*******************************************************************/
void DIALOG_PAD_PROPERTIES::PadOrientEvent( wxCommandEvent& event )
/********************************************************************/
{
switch( m_PadOrient->GetSelection() )
{
case 0:
m_dummyPad->m_Orient = 0;
break;
case 1:
m_dummyPad->m_Orient = 900;
break;
case 2:
m_dummyPad->m_Orient = -900;
break;
case 3:
m_dummyPad->m_Orient = 1800;
break;
default:
break;
}
wxString msg;
msg.Printf( wxT( "%d" ), m_dummyPad->m_Orient );
m_PadOrientCtrl->SetValue( msg );
TransfertDataToPad( m_dummyPad );
m_panelShowPad->Refresh();
}
/*****************************************************************/
void DIALOG_PAD_PROPERTIES::PadTypeSelected( wxCommandEvent& event )
/*****************************************************************/
/* Adjust the better mask layer according to the selected pad type
*/
{
long layer_mask;
int ii;
ii = m_PadType->GetSelection();
if( (ii < 0) || ( ii >= NBTYPES) )
ii = 0;
layer_mask = Std_Pad_Layers[ii];
SetPadLayersList( layer_mask );
// Enable/disable drill dialog items:
event.SetId( m_DrillShapeCtrl->GetSelection() );
OnDrillShapeSelected( event );
}
/****************************************************************/
void DIALOG_PAD_PROPERTIES::SetPadLayersList( long layer_mask )
/****************************************************************/
/** SetPadLayersList
* Update the CheckBoxes state in pad layers list,
* @param layer_mask = pad layer mask (ORed layers bit mask)
*/
{
m_PadLayerCu->SetValue( ( layer_mask & LAYER_BACK ) );
m_PadLayerCmp->SetValue( ( layer_mask & LAYER_FRONT ) );
m_PadLayerAdhCmp->SetValue( ( layer_mask & ADHESIVE_LAYER_FRONT ) );
m_PadLayerAdhCu->SetValue( ( layer_mask & ADHESIVE_LAYER_BACK ) );
m_PadLayerPateCmp->SetValue( ( layer_mask & SOLDERPASTE_LAYER_FRONT ) );
m_PadLayerPateCu->SetValue( ( layer_mask & SOLDERPASTE_LAYER_BACK ) );
m_PadLayerSilkCmp->SetValue( ( layer_mask & SILKSCREEN_LAYER_FRONT ) );
m_PadLayerSilkCu->SetValue( ( layer_mask & SILKSCREEN_LAYER_BACK ) );
m_PadLayerMaskCmp->SetValue( ( layer_mask & SOLDERMASK_LAYER_FRONT ) );
m_PadLayerMaskCu->SetValue( ( layer_mask & SOLDERMASK_LAYER_BACK ) );
m_PadLayerECO1->SetValue( ( layer_mask & ECO1_LAYER ) );
m_PadLayerECO2->SetValue( ( layer_mask & ECO2_LAYER ) );
m_PadLayerDraft->SetValue( ( layer_mask & DRAW_LAYER ) );
}
// Called when select/deselect a layer.
void DIALOG_PAD_PROPERTIES::OnSetLayer( wxCommandEvent& event )
{
TransfertDataToPad( m_dummyPad );
m_panelShowPad->Refresh();
}
/*************************************************************************/
void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
/*************************************************************************/
/* Updates the different parameters for the component being edited.
*/
{
bool rastnestIsChanged = false;
int isign = m_isFlipped ? -1 : 1;
bool success = TransfertDataToPad( m_dummyPad, true );
if( !success ) // An error on parameters has occured
return;
TransfertDataToPad( &g_Pad_Master, false );
g_Current_PadName = g_Pad_Master.ReturnStringPadName();
if( m_CurrentPad ) // Set current Pad parameters
{
MODULE* Module = (MODULE*) m_CurrentPad->GetParent();
m_Parent->SaveCopyInUndoList( Module, UR_CHANGED );
Module->m_LastEdit_Time = time( NULL );
// redraw the area where the pad was, without pad (delete pad on screen)
m_CurrentPad->m_Flags |= DO_NOT_DRAW;
m_Parent->DrawPanel->PostDirtyRect( m_CurrentPad->GetBoundingBox() );
m_CurrentPad->m_Flags &= ~DO_NOT_DRAW;
// Update values
m_CurrentPad->m_PadShape = g_Pad_Master.m_PadShape;
m_CurrentPad->m_Attribut = g_Pad_Master.m_Attribut;
if( m_CurrentPad->m_Pos != g_Pad_Master.m_Pos )
{
m_CurrentPad->m_Pos = g_Pad_Master.m_Pos;
rastnestIsChanged = true;
}
/* compute the pos 0 value, i.e. pad position for module orient = 0 i.e.
* refer to module origin (module position) */
m_CurrentPad->m_Pos0 = m_CurrentPad->m_Pos;
m_CurrentPad->m_Pos0 -= Module->m_Pos;
m_CurrentPad->m_Orient = (g_Pad_Master.m_Orient * isign) + Module->m_Orient;
RotatePoint( &m_CurrentPad->m_Pos0.x, &m_CurrentPad->m_Pos0.y, -Module->m_Orient );
m_CurrentPad->m_Size = g_Pad_Master.m_Size;
m_CurrentPad->m_DeltaSize = g_Pad_Master.m_DeltaSize;
m_CurrentPad->m_DeltaSize.y *= isign;
m_CurrentPad->m_Drill = g_Pad_Master.m_Drill;
m_CurrentPad->m_DrillShape = g_Pad_Master.m_DrillShape;
m_CurrentPad->m_Offset = g_Pad_Master.m_Offset;
m_CurrentPad->m_Offset.y *= isign;
if( m_CurrentPad->m_Masque_Layer != g_Pad_Master.m_Masque_Layer )
{
rastnestIsChanged = true;
m_CurrentPad->m_Masque_Layer = g_Pad_Master.m_Masque_Layer;
}
if( m_isFlipped )
m_CurrentPad->m_Masque_Layer = ChangeSideMaskLayer( m_CurrentPad->m_Masque_Layer );
m_CurrentPad->SetPadName( g_Pad_Master.ReturnStringPadName() );
if( m_CurrentPad->GetNetname() != g_Pad_Master.GetNetname() )
{
if( g_Pad_Master.GetNetname().IsEmpty() )
{
rastnestIsChanged = true;
m_CurrentPad->SetNet( 0 );
m_CurrentPad->SetNetname( wxEmptyString );
}
else
{
const NETINFO_ITEM* net = m_Parent->GetBoard()->FindNet( g_Pad_Master.GetNetname() );
if( net )
{
rastnestIsChanged = true;
m_CurrentPad->SetNetname( g_Pad_Master.GetNetname() );
m_CurrentPad->SetNet( net->GetNet() );
}
else
DisplayError( NULL, _( "Unknown netname, netname not changed" ) );
}
}
m_CurrentPad->m_LocalClearance = g_Pad_Master.m_LocalClearance;
m_CurrentPad->m_LocalSolderMaskMargin = g_Pad_Master.m_LocalSolderMaskMargin;
m_CurrentPad->m_LocalSolderPasteMargin = g_Pad_Master.m_LocalSolderPasteMargin;
m_CurrentPad->m_LocalSolderPasteMarginRatio = g_Pad_Master.m_LocalSolderPasteMarginRatio;
m_CurrentPad->ComputeShapeMaxRadius();
Module->Set_Rectangle_Encadrement();
m_CurrentPad->DisplayInfo( m_Parent );
// redraw the area where the pad was
m_Parent->DrawPanel->PostDirtyRect( m_CurrentPad->GetBoundingBox() );
m_Parent->OnModify();
}
EndModal( wxID_OK );
if( rastnestIsChanged ) // The net ratsnest must be recalculated
m_Parent->GetBoard()->m_Status_Pcb = 0;
}
bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError )
{
long PadLayerMask;
int internalUnits = m_Parent->m_InternalUnits;
wxString msg;
aPad->m_Attribut = CodeType[m_PadType->GetSelection()];
aPad->m_PadShape = CodeShape[m_PadShape->GetSelection()];
// Read pad clearances values:
aPad->m_LocalClearance = ReturnValueFromTextCtrl( *m_NetClearanceValueCtrl,
internalUnits );
aPad->m_LocalSolderMaskMargin = ReturnValueFromTextCtrl( *m_SolderMaskMarginCtrl,
internalUnits );
aPad->m_LocalSolderPasteMargin = ReturnValueFromTextCtrl( *m_SolderPasteMarginCtrl,
internalUnits );
double dtmp = 0.0;
msg = m_SolderPasteMarginRatioCtrl->GetValue();
msg.ToDouble( &dtmp );
// A margin ratio de -50% means no paste on a pad, the ratio must be >= 50 %
if( dtmp < -50 )
dtmp = -50;
if( dtmp > +100 )
dtmp = +100;
aPad->m_LocalSolderPasteMarginRatio = dtmp / 100;
// Read pad position:
aPad->m_Pos.x = ReturnValueFromTextCtrl( *m_PadPosition_X_Ctrl, internalUnits );
aPad->m_Pos.y = ReturnValueFromTextCtrl( *m_PadPosition_Y_Ctrl, internalUnits );
aPad->m_Pos0 = aPad->m_Pos;
// Read pad drill:
aPad->m_Drill.x = ReturnValueFromTextCtrl( *m_PadDrill_X_Ctrl, internalUnits );
aPad->m_Drill.y = ReturnValueFromTextCtrl( *m_PadDrill_Y_Ctrl, internalUnits );
if( m_DrillShapeCtrl->GetSelection() == 0 )
{
aPad->m_DrillShape = PAD_CIRCLE;
aPad->m_Drill.y = aPad->m_Drill.x;
}
else
aPad->m_DrillShape = PAD_OVAL;
// Read pad shape size:
aPad->m_Size.x = ReturnValueFromTextCtrl( *m_ShapeSize_X_Ctrl, internalUnits );
aPad->m_Size.y = ReturnValueFromTextCtrl( *m_ShapeSize_Y_Ctrl, internalUnits );
if( aPad->m_PadShape == PAD_CIRCLE )
aPad->m_Size.y = aPad->m_Size.x;
// Read pad shape delta size:
// m_DeltaSize.x or m_DeltaSize.y must be NULL. for a trapezoid.
wxSize delta;
if( m_radioBtnDeltaXdir->GetValue() )
delta.x = ReturnValueFromTextCtrl( *m_ShapeDelta_Ctrl, internalUnits );
else
delta.y = ReturnValueFromTextCtrl( *m_ShapeDelta_Ctrl, internalUnits );
aPad->m_DeltaSize = delta;
// Test bad values (be sure delta values are not to large)
// remember DeltaSize.x is the Y size variation
bool error = false;
if( (aPad->m_DeltaSize.x < 0) && (aPad->m_DeltaSize.x <= -aPad->m_Size.y) )
{
aPad->m_DeltaSize.x = -aPad->m_Size.y + 2;
error = true;
}
if( (aPad->m_DeltaSize.x > 0) && (aPad->m_DeltaSize.x >= aPad->m_Size.y) )
{
aPad->m_DeltaSize.x = aPad->m_Size.y - 2;
error = true;
}
if( (aPad->m_DeltaSize.y < 0) && (aPad->m_DeltaSize.y <= -aPad->m_Size.x) )
{
aPad->m_DeltaSize.y = -aPad->m_Size.x + 2;
error = true;
}
if( (aPad->m_DeltaSize.y > 0) && (aPad->m_DeltaSize.y >= aPad->m_Size.x) )
{
aPad->m_DeltaSize.y = aPad->m_Size.x - 2;
error = true;
}
// Read pad shape offset:
aPad->m_Offset.x = ReturnValueFromTextCtrl( *m_ShapeOffset_X_Ctrl, internalUnits );
aPad->m_Offset.y = ReturnValueFromTextCtrl( *m_ShapeOffset_Y_Ctrl, internalUnits );
long orient_value = 0;
msg = m_PadOrientCtrl->GetValue();
msg.ToLong( &orient_value );
aPad->m_Orient = orient_value;
msg = m_PadNumCtrl->GetValue().Left( 4 );
aPad->SetPadName( msg );
aPad->SetNetname( m_PadNetNameCtrl->GetValue() );
// Clear some values, according to the pad type and shape
switch( aPad->m_PadShape )
{
case PAD_CIRCLE:
aPad->m_Offset = wxSize( 0, 0 );
aPad->m_DeltaSize = wxSize( 0, 0 );
aPad->m_Size.y = aPad->m_Size.x;
break;
case PAD_RECT:
aPad->m_DeltaSize = wxSize( 0, 0 );
break;
case PAD_OVAL:
aPad->m_DeltaSize = wxSize( 0, 0 );
break;
case PAD_TRAPEZOID:
break;
}
switch( aPad->m_Attribut )
{
case PAD_STANDARD:
break;
case PAD_CONN:
case PAD_SMD:
aPad->m_Offset = wxSize( 0, 0 );
aPad->m_Drill = wxSize( 0, 0 );
break;
case PAD_HOLE_NOT_PLATED:
break;
default:
DisplayError( this, wxT( "Error: unknown pad type" ) );
break;
}
PadLayerMask = 0;
if( m_PadLayerCu->GetValue() )
PadLayerMask |= LAYER_BACK;
if( m_PadLayerCmp->GetValue() )
PadLayerMask |= LAYER_FRONT;
if( ( PadLayerMask & (LAYER_BACK | LAYER_FRONT) ) == (LAYER_BACK | LAYER_FRONT) )
PadLayerMask |= ALL_CU_LAYERS;
if( m_PadLayerAdhCmp->GetValue() )
PadLayerMask |= ADHESIVE_LAYER_FRONT;
if( m_PadLayerAdhCu->GetValue() )
PadLayerMask |= ADHESIVE_LAYER_BACK;
if( m_PadLayerPateCmp->GetValue() )
PadLayerMask |= SOLDERPASTE_LAYER_FRONT;
if( m_PadLayerPateCu->GetValue() )
PadLayerMask |= SOLDERPASTE_LAYER_BACK;
if( m_PadLayerSilkCmp->GetValue() )
PadLayerMask |= SILKSCREEN_LAYER_FRONT;
if( m_PadLayerSilkCu->GetValue() )
PadLayerMask |= SILKSCREEN_LAYER_BACK;
if( m_PadLayerMaskCmp->GetValue() )
PadLayerMask |= SOLDERMASK_LAYER_FRONT;
if( m_PadLayerMaskCu->GetValue() )
PadLayerMask |= SOLDERMASK_LAYER_BACK;
if( m_PadLayerECO1->GetValue() )
PadLayerMask |= ECO1_LAYER;
if( m_PadLayerECO2->GetValue() )
PadLayerMask |= ECO2_LAYER;
if( m_PadLayerDraft->GetValue() )
PadLayerMask |= DRAW_LAYER;
aPad->m_Masque_Layer = PadLayerMask;
/* Test for incorrect values */
if( aPromptOnError )
{
if( (aPad->m_Size.x < aPad->m_Drill.x)
|| (aPad->m_Size.y < aPad->m_Drill.y) )
{
DisplayError( this, _( "Incorrect value for pad drill: pad drill bigger than pad size" ) );
return false;
}
int padlayers_mask = PadLayerMask & (LAYER_BACK | LAYER_FRONT);
if( padlayers_mask == 0 )
{
if( aPad->m_Drill.x || aPad->m_Drill.y )
{
DisplayError( this, _( "Error: pad is not on a copper layer and has a hole" ) );
return false;
}
}
if( ( aPad->m_Size.x / 2 <= ABS( aPad->m_Offset.x ) )
|| ( aPad->m_Size.y / 2 <= ABS( aPad->m_Offset.y ) ) )
{
DisplayError( this, _( "Incorrect value for pad offset" ) );
return false;
}
if( error )
{
DisplayError( this, _( "Too large value for pad delta size" ) );
return false;
}
}
return true;
}
// Called when a dimension has change.
// Update the pad dimensions shown in the panel.
void DIALOG_PAD_PROPERTIES::OnValuesChanged( wxCommandEvent& event )
{
if( m_canUpdate )
{
TransfertDataToPad( m_dummyPad );
m_panelShowPad->Refresh();
}
}
/*********************************************************************/
void DIALOG_PAD_PROPERTIES::OnCancelButtonClick( wxCommandEvent& event )
/*********************************************************************/
{
EndModal( wxID_CANCEL );
}