kicad/pcbnew/controle.cpp

352 lines
10 KiB
C++

/********************************************************/
/* Routines generales de gestion des commandes usuelles */
/********************************************************/
/* fichier controle.cpp */
/*
* Routines d'affichage grille, Boite de coordonnees, Curseurs, marqueurs ...
*/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "pcbnew.h"
#include "id.h"
#include "protos.h"
#include "collectors.h"
/* Routines Locales : */
/* Variables Locales */
/**********************************/
void RemoteCommand( const char* cmdline )
/**********************************/
/* Read a remote command send by eeschema via a socket,
* port KICAD_PCB_PORT_SERVICE_NUMBER (currently 4242)
*/
{
char line[1024];
wxString msg;
char* idcmd;
char* text;
WinEDA_PcbFrame* frame = EDA_Appl->m_PcbFrame;
MODULE* module = 0;
strncpy( line, cmdline, sizeof(line) - 1 );
msg = CONV_FROM_UTF8( line );
idcmd = strtok( line, " \n\r" );
text = strtok( NULL, " \n\r" );
if( (idcmd == NULL) || (text == NULL) )
return;
if( strcmp( idcmd, "$PART:" ) == 0 )
{
msg = CONV_FROM_UTF8( text );
module = ReturnModule( frame->m_Pcb, msg );
msg.Printf( _( "Locate module %s %s" ), msg.GetData(),
module ? wxT( "Ok" ) : wxT( "not found" ) );
frame->Affiche_Message( msg );
if( module )
{
wxClientDC dc( frame->DrawPanel );
frame->DrawPanel->PrepareGraphicContext( &dc );
frame->DrawPanel->CursorOff( &dc );
frame->GetScreen()->m_Curseur = module->m_Pos;
frame->DrawPanel->CursorOn( &dc );
}
}
if( idcmd && strcmp( idcmd, "$PIN:" ) == 0 )
{
wxString pinName, modName;
D_PAD* pad = NULL;
int netcode = -1;
pinName = CONV_FROM_UTF8( text );
text = strtok( NULL, " \n\r" );
if( text && strcmp( text, "$PART:" ) == 0 )
text = strtok( NULL, "\n\r" );
wxClientDC dc( frame->DrawPanel );
frame->DrawPanel->PrepareGraphicContext( &dc );
modName = CONV_FROM_UTF8( text );
module = ReturnModule( frame->m_Pcb, modName );
if( module )
pad = ReturnPad( module, pinName );
if( pad )
netcode = pad->m_NetCode;
if( netcode > 0 ) /* hightlighted the net selected net*/
{
if( g_HightLigt_Status ) /* erase the old hightlighted net */
frame->Hight_Light( &dc );
g_HightLigth_NetCode = netcode;
frame->Hight_Light( &dc ); /* hightlighted the new one */
frame->DrawPanel->CursorOff( &dc );
frame->GetScreen()->m_Curseur = pad->m_Pos;
frame->DrawPanel->CursorOn( &dc );
}
if( module == NULL )
msg.Printf( _( "module %s not found" ), text );
else if( pad == NULL )
msg.Printf( _( "Pin %s (module %s) not found" ), pinName.GetData(), modName.GetData() );
else
msg.Printf( _( "Locate Pin %s (module %s)" ), pinName.GetData(), modName.GetData() );
frame->Affiche_Message( msg );
}
if( module ) // if found, center the module on screen.
frame->Recadre_Trace( false );
}
/***********************************************************************/
BOARD_ITEM* WinEDA_BasePcbFrame::PcbGeneralLocateAndDisplay()
/***********************************************************************/
/* Search an item under the mouse cursor.
* items are searched first on the current working layer.
* if nothing found, an item will be searched without layer restriction
*/
{
BOARD_ITEM* item;
#if defined(DEBUG)
// test scaffolding for Collect():
GENERAL_COLLECTORS_GUIDE guide = GetCollectorsGuide();
m_Collector->Collect( m_Pcb,
GetScreen()->RefPos(true),
&guide );
// use only the first one collected for now.
item = (*m_Collector)[0]; // grab first one, may be NULL
std::cout << "collected " << m_Collector->GetCount() << '\n'; // debugging only
if( item )
{
item->Display_Infos( this );
// debugging: print out the collected items, showing their priority order too.
for( unsigned i=0; i<m_Collector->GetCount(); ++i )
(*m_Collector)[i]->Show( 0, std::cout );
}
return item;
#else
item = Locate( CURSEUR_OFF_GRILLE, GetScreen()->m_Active_Layer );
if( item == NULL )
item = Locate( CURSEUR_OFF_GRILLE, -1 );
return item;
#endif
}
/****************************************************************/
void WinEDA_BasePcbFrame::GeneralControle( wxDC* DC, wxPoint Mouse )
/*****************************************************************/
{
wxSize delta;
int zoom = GetScreen()->GetZoom();
wxPoint curpos, oldpos;
int hotkey = 0;
ActiveScreen = GetScreen();
// Save the board after the time out :
int CurrentTime = time( NULL );
if( !GetScreen()->IsModify() || GetScreen()->IsSave() )
{
/* If no change, reset the time out */
g_SaveTime = CurrentTime;
}
if( (CurrentTime - g_SaveTime) > g_TimeOut )
{
wxString tmpFileName = GetScreen()->m_FileName;
wxString filename = g_SaveFileName + PcbExtBuffer;
bool flgmodify = GetScreen()->IsModify();
( (WinEDA_PcbFrame*) this )->SavePcbFile( filename );
if( flgmodify ) // Set the flags m_Modify cleared by SavePcbFile()
{
GetScreen()->SetModify();
GetScreen()->SetSave(); // Set the flags m_FlagSave cleared by SetModify()
}
GetScreen()->m_FileName = tmpFileName;
SetTitle( GetScreen()->m_FileName );
}
curpos = DrawPanel->CursorRealPosition( Mouse );
oldpos = GetScreen()->m_Curseur;
delta.x = (int) round( (double) GetScreen()->GetGrid().x / zoom );
delta.y = (int) round( (double) GetScreen()->GetGrid().y / zoom );
if( delta.x <= 0 )
delta.x = 1;
if( delta.y <= 0 )
delta.y = 1;
switch( g_KeyPressed )
{
case EDA_PANNING_UP_KEY:
OnZoom( ID_ZOOM_PANNING_UP );
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_DOWN_KEY:
OnZoom( ID_ZOOM_PANNING_DOWN );
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_LEFT_KEY:
OnZoom( ID_ZOOM_PANNING_LEFT );
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_RIGHT_KEY:
OnZoom( ID_ZOOM_PANNING_RIGHT );
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_ZOOM_IN_FROM_MOUSE:
OnZoom( ID_ZOOM_PLUS_KEY );
oldpos = curpos = GetScreen()->m_Curseur;
break;
case EDA_ZOOM_OUT_FROM_MOUSE:
OnZoom( ID_ZOOM_MOINS_KEY );
oldpos = curpos = GetScreen()->m_Curseur;
break;
case EDA_ZOOM_CENTER_FROM_MOUSE:
OnZoom( ID_ZOOM_CENTER_KEY );
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_NUMPAD8: /* Deplacement curseur vers le haut */
case WXK_UP:
Mouse.y -= delta.y;
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD2: /* Deplacement curseur vers le bas */
case WXK_DOWN:
Mouse.y += delta.y;
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD4: /* Deplacement curseur vers la gauche */
case WXK_LEFT:
Mouse.x -= delta.x;
DrawPanel->MouseTo( Mouse );
break;
case WXK_NUMPAD6: /* Deplacement curseur vers la droite */
case WXK_RIGHT:
Mouse.x += delta.x;
DrawPanel->MouseTo( Mouse );
break;
default:
hotkey = g_KeyPressed;
break;
}
/* Put cursor in new position, according to the zoom keys (if any) */
GetScreen()->m_Curseur = curpos;
/* Put cursor on grid or a pad centre if requested
* But if the tool DELETE is active the cursor is left off grid
* this is better to reach items to delete off grid
*/
D_PAD* pad;
bool keep_on_grid = TRUE;
if( m_ID_current_state == ID_PCB_DELETE_ITEM_BUTT )
keep_on_grid = FALSE;
/* Cursor is left off grid if no block in progress and no moving object */
if( GetScreen()->BlockLocate.m_State != STATE_NO_BLOCK )
keep_on_grid = TRUE;
EDA_BaseStruct* DrawStruct = GetScreen()->GetCurItem();
if( DrawStruct && DrawStruct->m_Flags )
keep_on_grid = TRUE;
switch( g_MagneticPadOption )
{
case capture_cursor_in_track_tool:
case capture_always:
pad = Locate_Any_Pad( m_Pcb, CURSEUR_OFF_GRILLE, TRUE );
if( (m_ID_current_state != ID_TRACK_BUTT )
&& (g_MagneticPadOption == capture_cursor_in_track_tool) )
pad = NULL;
if( keep_on_grid )
{
if( pad ) // Put cursor on the pad
GetScreen()->m_Curseur = curpos = pad->m_Pos;
else
// Put cursor on grid
PutOnGrid( &GetScreen()->m_Curseur );
}
break;
case no_effect:
default:
// If we are not in delete function, put cursor on grid
if( keep_on_grid )
PutOnGrid( &GetScreen()->m_Curseur );
break;
}
if( oldpos != GetScreen()->m_Curseur )
{
curpos = GetScreen()->m_Curseur;
GetScreen()->m_Curseur = oldpos;
DrawPanel->CursorOff( DC );
GetScreen()->m_Curseur = curpos;
DrawPanel->CursorOn( DC );
if( DrawPanel->ManageCurseur )
{
DrawPanel->ManageCurseur( DrawPanel, DC, TRUE );
}
}
if( hotkey )
{
OnHotKey( DC, hotkey, NULL );
}
if( GetScreen()->IsRefreshReq() )
{
RedrawActiveWindow( DC, TRUE );
}
SetToolbars();
Affiche_Status_Box(); /* Affichage des coord curseur */
}