376 lines
14 KiB
C++
376 lines
14 KiB
C++
/*
|
|
* This program source code file is part of KiCad, a free EDA CAD application.
|
|
*
|
|
* Copyright (C) 2011-2016 Jean-Pierre Charras jp.charras at wanadoo.fr
|
|
* Copyright (C) 1992-2021 KiCad Developers, see AUTHORS.txt for contributors.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, you may find one here:
|
|
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
|
|
* or you may search the http://www.gnu.org website for the version 2 license,
|
|
* or you may write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
|
|
*/
|
|
|
|
#ifndef EXCELLON_IMAGE_H
|
|
#define EXCELLON_IMAGE_H
|
|
|
|
|
|
enum drill_M_code_t {
|
|
DRILL_M_UNKNOWN,
|
|
DRILL_M_END,
|
|
DRILL_M_TOOL_DOWN, // tool down (starting a routed hole)
|
|
DRILL_M_TOOL_UP, // tool up (ending a routed hole)
|
|
DRILL_M_ENDFILE,
|
|
DRILL_M_MESSAGE,
|
|
DRILL_M_LONGMESSAGE,
|
|
DRILL_M_HEADER,
|
|
DRILL_M_ENDHEADER,
|
|
DRILL_M_BEGINPATTERN,
|
|
DRILL_M_ENDPATTERN,
|
|
DRILL_M_CANNEDTEXT,
|
|
DRILL_M_TIPCHECK,
|
|
DRILL_M_METRIC,
|
|
DRILL_M_IMPERIAL,
|
|
DRILL_METRIC_HEADER,
|
|
DRILL_IMPERIAL_HEADER,
|
|
DRILL_DETECT_BROKEN,
|
|
DRILL_INCREMENTALHEADER,
|
|
DRILL_REWIND_STOP,
|
|
DRILL_TOOL_CHANGE_STOP,
|
|
DRILL_AUTOMATIC_SPEED,
|
|
DRILL_AXIS_VERSION,
|
|
DRILL_RESET_CMD,
|
|
DRILL_AUTOMATIC_TOOL_CHANGE,
|
|
DRILL_FMT,
|
|
DRILL_SKIP,
|
|
DRILL_TOOL_INFORMATION,
|
|
DRILL_M_END_LIST // not used: sentinel
|
|
};
|
|
|
|
|
|
enum drill_G_code_t {
|
|
DRILL_G_UNKNOWN = DRILL_M_END_LIST+1, // Use next available value
|
|
DRILL_G_ABSOLUTE,
|
|
DRILL_G_INCREMENTAL,
|
|
DRILL_G_ZEROSET,
|
|
DRILL_G_ROUT,
|
|
DRILL_G_DRILL,
|
|
DRILL_G_SLOT,
|
|
DRILL_G_ZERO_SET,
|
|
DRILL_G_LINEARMOVE,
|
|
DRILL_G_CWMOVE,
|
|
DRILL_G_CCWMOVE
|
|
};
|
|
|
|
// Helper struct to analyze Excellon commands
|
|
struct EXCELLON_CMD
|
|
{
|
|
std::string m_Name; // key string
|
|
int m_Code; // internal code, used as id in functions
|
|
int m_asParams; // 0 = no param, -1 = skip params, 1 = read params
|
|
};
|
|
|
|
// Helper struct to store Excellon points in routing mode
|
|
#define ROUTE_CCW 1
|
|
#define ROUTE_CW -1
|
|
|
|
struct EXCELLON_ROUTE_COORD
|
|
{
|
|
int m_x; // X coordinate
|
|
int m_y; // y coordinate
|
|
int m_cx; // center X coordinate in circular routing mode
|
|
// (when the IJ command is used)
|
|
int m_cy; // center y coordinate in circular routing mode
|
|
// (when the IJ command is used)
|
|
int m_radius; // radius in circular routing mode (when the A## command is used)
|
|
int m_rmode; // routing mode: 0 = circular, ROUTE_CCW (1) = ccw, ROUTE_CW (-1) = cw
|
|
int m_arc_type_info; // arc using radius or center coordinates
|
|
|
|
EXCELLON_ROUTE_COORD():
|
|
m_x( 0 ), m_y( 0 ), m_cx( 0 ), m_cy( 0 ), m_radius( 0 ),
|
|
m_rmode( 0 ), m_arc_type_info( 0 )
|
|
{}
|
|
|
|
EXCELLON_ROUTE_COORD( const wxPoint& aPos ):
|
|
m_x( aPos.x ), m_y( aPos.y ),
|
|
m_cx( 0 ), m_cy( 0 ), m_radius( 0 ), m_rmode( 0 ),
|
|
m_arc_type_info( ARC_INFO_TYPE_NONE )
|
|
{}
|
|
|
|
EXCELLON_ROUTE_COORD( const wxPoint& aPos, const wxPoint& aCenter, int aMode ):
|
|
m_x( aPos.x ), m_y( aPos.y ),
|
|
m_cx( aCenter.x ), m_cy( aCenter.y ), m_radius( 0 ), m_rmode( aMode ),
|
|
m_arc_type_info( ARC_INFO_TYPE_CENTER )
|
|
{}
|
|
|
|
EXCELLON_ROUTE_COORD( const wxPoint& aPos, int aRadius, int aMode ):
|
|
m_x( aPos.x ), m_y( aPos.y ),
|
|
m_cx( 0 ), m_cy( 0 ), m_radius( aRadius ), m_rmode( aMode ),
|
|
m_arc_type_info( ARC_INFO_TYPE_RADIUS )
|
|
{}
|
|
|
|
wxPoint GetPos() { return wxPoint( m_x, m_y ); }
|
|
};
|
|
|
|
/**
|
|
* Handle a drill image.
|
|
*
|
|
* It is derived from #GERBER_FILE_IMAGE because there is a lot of likeness between EXCELLON
|
|
* files and GERBER files. DCode aperture are also similar to T Codes.
|
|
*/
|
|
class EXCELLON_IMAGE : public GERBER_FILE_IMAGE
|
|
{
|
|
public: EXCELLON_IMAGE( int layer ) :
|
|
GERBER_FILE_IMAGE( layer )
|
|
{
|
|
m_State = READ_HEADER_STATE;
|
|
m_SlotOn = false;
|
|
m_RouteModeOn = false;
|
|
}
|
|
|
|
|
|
~EXCELLON_IMAGE() {};
|
|
|
|
virtual void ResetDefaultValues() override
|
|
{
|
|
GERBER_FILE_IMAGE::ResetDefaultValues();
|
|
SelectUnits( false );
|
|
}
|
|
|
|
|
|
/**
|
|
* Read and load a drill (EXCELLON format) file.
|
|
*
|
|
* When the file cannot be loaded, warning and info messages are stored in m_Messages.
|
|
*
|
|
* @param aFullFileName is the full filename of the Gerber file.
|
|
* @return true if OK, false if the gerber file was not loaded.
|
|
*/
|
|
bool LoadFile( const wxString& aFullFileName );
|
|
|
|
private:
|
|
bool Execute_HEADER_And_M_Command( char*& text );
|
|
bool Select_Tool( char*& text );
|
|
bool Execute_EXCELLON_G_Command( char*& text );
|
|
bool Execute_Drill_Command( char*& text );
|
|
|
|
/**
|
|
* Read a tool definition like T1C0.02 or T1F00S00C0.02 or T1C0.02F00S00
|
|
* and enter params in TCODE list.
|
|
*/
|
|
bool readToolInformation( char*& aText );
|
|
|
|
int TCodeNumber( char*& aText )
|
|
{
|
|
return DCodeNumber( aText );
|
|
}
|
|
|
|
/**
|
|
* End a route command started by M15 ot G01, G02 or G03 command.
|
|
*/
|
|
void FinishRouteCommand();
|
|
|
|
void SelectUnits( bool aMetric );
|
|
|
|
private:
|
|
enum excellon_state {
|
|
READ_HEADER_STATE, // When we are in this state, we are reading header
|
|
READ_PROGRAM_STATE // When we are in this state, we are reading drill data
|
|
};
|
|
|
|
excellon_state m_State; // state of excellon file analysis
|
|
bool m_SlotOn; // true during an oblong drill definition
|
|
// by G85 (canned slot) command
|
|
bool m_RouteModeOn; // true during a route mode (for instance a oval hole) or
|
|
// a cutout.
|
|
std::vector<EXCELLON_ROUTE_COORD> m_RoutePositions; // The list of points in a route mode
|
|
};
|
|
|
|
|
|
/*
|
|
* EXCELLON commands are given here.
|
|
* Pcbnew uses only few excellon commands
|
|
*/
|
|
|
|
/*
|
|
* see http://www.excellon.com/manuals/program.htm
|
|
*/
|
|
|
|
/* coordinates units:
|
|
* Coordinates are measured either in inch or metric (millimeters).
|
|
* Inch coordinates are in six digits (00.0000) with increments as small as 0.0001 (1/10,000).
|
|
* Metric coordinates can be measured in microns (thousandths of a millimeter)
|
|
* in one of the following three ways:
|
|
* Five digit 10 micron resolution (000.00)
|
|
* Six digit 10 micron resolution (0000.00)
|
|
* Six digit micron resolution (000.000)
|
|
*
|
|
* Leading and trailing zeros:
|
|
* Excellon (CNC-7) uses inches in six digits and metric in five or six digits.
|
|
* The zeros to the left of the coordinate are called leading zeros (LZ).
|
|
* The zeros to right of the coordinate are called trailing zeros (TZ).
|
|
* The CNC-7 uses leading zeros unless you specify otherwise through a part program.
|
|
* You can do so with the INCH/METRIC command.
|
|
* With leading zeros, the leading zeros must always be included.
|
|
* Trailing zeros are unneeded and may be left off.
|
|
* For trailing zeros, the reverse of the above is true.
|
|
*/
|
|
|
|
/*
|
|
* EXCELLON Commands Used in a Header
|
|
* The following table provides you with a list of commands which
|
|
* are the most used in a part program header.
|
|
* COMMAND DESCRIPTION
|
|
* AFS Automatic Feeds and Speeds
|
|
* ATC Automatic Tool Change
|
|
* BLKD Delete all Blocks starting with a slash (/)
|
|
* CCW Clockwise or Counter-clockwise Routing
|
|
* CP Cutter Compensation
|
|
* DETECT Broken Tool Detection
|
|
* DN Down Limit Set
|
|
* DTMDIST Maximum Rout Distance Before Toolchange
|
|
* EXDA Extended Drill Area
|
|
* FMAT Format 1 or 2
|
|
* FSB Turns the Feed/Speed Buttons off
|
|
* HPCK Home Pulse Check
|
|
* ICI Incremental Input of Part Program Coordinates
|
|
* INCH Measure Everything in Inches
|
|
* METRIC Measure Everything in Metric
|
|
* M48 Beginning of Part Program Header
|
|
* M95 End of Header
|
|
* NCSL NC Slope Enable/Disable
|
|
* OM48 Override Part Program Header
|
|
* OSTOP Optional Stop Switch
|
|
* OTCLMP Override Table Clamp
|
|
* PCKPARAM Set up pecking tool,depth,infeed and retract parameters
|
|
* PF Floating Pressure Foot Switch
|
|
* PPR Programmable Plunge Rate Enable
|
|
* PVS Pre-vacuum Shut-off Switch
|
|
* R,C Reset Clocks
|
|
* R,CP Reset Program Clocks
|
|
* R,CR Reset Run Clocks
|
|
* R,D Reset All Cutter Distances
|
|
* R,H Reset All Hit Counters
|
|
* R,T Reset Tool Data
|
|
* SBK Single Block Mode Switch
|
|
* SG Spindle Group Mode
|
|
* SIXM Input From External Source
|
|
* T Tool Information
|
|
* TCST Tool Change Stop
|
|
* UP Upper Limit Set
|
|
* VER Selection of X and Y Axis Version
|
|
* Z Zero Set
|
|
* ZA Auxiliary Zero
|
|
* ZC Zero Correction
|
|
* ZS Zero Preset
|
|
* Z+# or Z-# Set Depth Offset
|
|
* % Rewind Stop
|
|
* #/#/# Link Tool for Automatic Tool Change
|
|
* / Clear Tool Linking
|
|
*/
|
|
|
|
/*
|
|
* Beyond The Header: The Part Program Body
|
|
* COMMAND DESCRIPTION
|
|
* A# Arc Radius
|
|
* B# Retract Rate
|
|
* C# Tool Diameter
|
|
* F# Table Feed Rate;Z Axis Infeed Rate
|
|
* G00X#Y# Route Mode; XY is the starting point
|
|
* G01X#Y# Linear (Straight Line) Route Mode YX is the ending point
|
|
* G02X#Y#... Circular CW Mode. Radius value (A#) or Center position (I#J#) follows
|
|
* G03X#Y#... Circular CCW Mode. Radius value (A#) or Center position (I#J#) follows
|
|
* G04X# Variable Dwell
|
|
* G05 Drill Mode
|
|
* G07 Override current tool feed or speed
|
|
* G32X#Y#A# Routed Circle Canned Cycle
|
|
* CW G33X#Y#A# Routed Circle Canned Cycle
|
|
* CCW G34,#(,#) Select Vision Tool
|
|
* G35(X#Y#) Single Point Vision Offset (Relative to Work Zero)
|
|
* G36(X#Y#) Multipoint Vision Translation (Relative to Work Zero)
|
|
* G37 Cancel Vision Translation or Offset (From G35 or G36)
|
|
* G38(X#Y#) Vision Corrected Single Hole Drilling (Relative to Work Zero)
|
|
* G39(X#Y#) Vision System Autocalibration
|
|
* G40 Cutter Compensation Off
|
|
* G41 Cutter Compensation Left
|
|
* G42 Cutter Compensation Right
|
|
* G45(X#Y#) Single Point Vision Offset (Relative to G35 or G36)
|
|
* G46(X#Y#) Multipoint Vision Translation (Relative to G35 or G36)
|
|
* G47 Cancel Vision Translation or Offset (From G45 or G46)
|
|
* G48(X#Y#) Vision Corrected Single Hole Drilling (Relative to G35 or G36)
|
|
* G82(G81) Dual In Line Package
|
|
* G83 Eight Pin L Pack
|
|
* G84 Circle
|
|
* G85 Slot
|
|
* G87 Routed Step Slot Canned Cycle
|
|
* G90 Absolute Mode
|
|
* G91 Incremental Input Mode
|
|
* G93X#Y# Zero Set
|
|
* H# Maximum hit count
|
|
* I#J# Arc Center Offset
|
|
* M00(X#Y#) End of Program - No Rewind
|
|
* M01 End of Pattern
|
|
* M02X#Y# Repeat Pattern Offset
|
|
* M06(X#Y#) Optional Stop
|
|
* M08 End of Step and Repeat
|
|
* M09(X#Y#) Stop for Inspection
|
|
* M14 Z Axis Route Position With Depth Controlled Contouring
|
|
* M15 Z Axis Route Position
|
|
* M16 Retract With Clamping
|
|
* M17 Retract Without Clamping
|
|
* M18 Command tool tip check
|
|
* M25 Beginning of Pattern
|
|
* M30(X#Y#) End of Program Rewind
|
|
* M45,long message\ Long Operator message on multiple\ part program lines
|
|
* M47,text Operator Message
|
|
* M50,# Vision Step and Repeat Pattern Start
|
|
* M51,# Vision Step and Repeat Rewind
|
|
* M52(#) Vision Step and Repeat Offset Counter Control
|
|
* M02XYM70 Swap Axes
|
|
* M60 Reference Scaling enable
|
|
* M61 Reference Scaling disable
|
|
* M62 Turn on peck drilling
|
|
* M63 Turn off peck drilling
|
|
* M71 Metric Measuring Mode
|
|
* M72 Inch Measuring Mode
|
|
* M02XYM80 Mirror Image X Axis
|
|
* M02XYM90 Mirror Image Y Axis
|
|
* M97,text Canned Text
|
|
* M98,text Canned Text
|
|
* M99,subprogram User Defined Stored Pattern
|
|
* P#X#(Y#) Repeat Stored Pattern
|
|
* R#M02X#Y# Repeat Pattern (S&R)
|
|
* R#(X#Y#) Repeat Hole
|
|
* S# Spindle RPM
|
|
* T# Tool Selection; Cutter Index
|
|
* Z+# or Z-# Depth Offset
|
|
* % Beginning of Pattern (see M25 command)
|
|
* / Block Delete
|
|
*/
|
|
|
|
/*
|
|
* Example of a Header
|
|
* COMMAND PURPOSE
|
|
* M48 The beginning of a header
|
|
* INCH,LZ Use the inch measuring system with leading zeros
|
|
* VER,1 Use Version 1 X and Y axis layout
|
|
* FMAT,2 Use Format 2 commands
|
|
* 1/2/3 Link tools 1, 2, and 3
|
|
* T1C.04F200S65 Set Tool 1 for 0.040" with infeed rate of 200 inch/min Speed of 65,000 RPM
|
|
* DETECT,ON Detect broken tools
|
|
* M95 End of the header
|
|
*/
|
|
|
|
#endif // EXCELLON_IMAGE_H
|