kicad/utils/idftools/dxf2idf.cpp

432 lines
11 KiB
C++

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2014 Cirilo Bernardo
* Copyright (C) 2018-2020 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <cstdio>
#include <iostream>
#include <dxf2idf.h>
// differences in angle smaller than MIN_ANG are considered equal
#define MIN_ANG (0.01)
// min and max bulge bracketing min. arc before transition to line segment
// and max. arc limit
// MIN_BULGE = 0.002 ~0.45 degrees
// MAX_BULGE = 2000 ~89.97 degrees
#define MIN_BULGE 0.002
#define MAX_BULGE 2000.0
DXF2IDF::~DXF2IDF()
{
while( !lines.empty() )
{
#ifdef DEBUG_IDF
IDF3::printSeg( lines.back() );
#endif
delete lines.back();
lines.pop_back();
}
}
bool DXF2IDF::ReadDxf( const std::string& aFile )
{
DL_Dxf dxf_reader;
bool success = true;
if( !dxf_reader.in( aFile, this ) ) // if file open failed
success = false;
return success;
}
void DXF2IDF::addLine( const DL_LineData& aData )
{
IDF_POINT p1, p2;
p1.x = aData.x1 * m_scale;
p1.y = aData.y1 * m_scale;
p2.x = aData.x2 * m_scale;
p2.y = aData.y2 * m_scale;
insertLine( p1, p2 );
return;
}
void DXF2IDF::addCircle( const DL_CircleData& aData )
{
IDF_POINT p1, p2;
p1.x = aData.cx * m_scale;
p1.y = aData.cy * m_scale;
p2.x = p1.x + aData.radius * m_scale;
p2.y = p1.y;
IDF_SEGMENT* seg = new IDF_SEGMENT( p1, p2, 360, true );
if( seg )
lines.push_back( seg );
return;
}
void DXF2IDF::addArc( const DL_ArcData& aData )
{
IDF_POINT p1, p2;
p1.x = aData.cx * m_scale;
p1.y = aData.cy * m_scale;
// note: DXF circles always run CCW
double ea = aData.angle2;
while( ea < aData.angle1 )
ea += M_PI;
p2.x = p1.x + cos( aData.angle1 ) * aData.radius * m_scale;
p2.y = p1.y + sin( aData.angle1 ) * aData.radius * m_scale;
double angle = ( ea - aData.angle1 ) * 180.0 / M_PI;
IDF_SEGMENT* seg = new IDF_SEGMENT( p1, p2, angle, true );
if( seg )
lines.push_back( seg );
return;
}
bool DXF2IDF::WriteOutline( FILE* aFile, bool isInch )
{
if( lines.empty() )
{
std::cerr << "* DXF2IDF: empty outline\n";
return false;
}
// 1. find lowest X value
// 2. string an outline together
// 3. emit warnings if more than 1 outline
IDF_OUTLINE outline;
IDF3::GetOutline( lines, outline );
if( outline.empty() )
{
return false;
}
char loopDir = '1';
if( outline.IsCCW() )
loopDir = '0';
std::list<IDF_SEGMENT*>::iterator bo;
std::list<IDF_SEGMENT*>::iterator eo;
if( outline.size() == 1 )
{
if( !outline.front()->IsCircle() )
{
return false;
}
// NOTE: a circle always has an angle of 360, never -360,
// otherwise SolidWorks chokes on the file.
if( isInch )
{
fprintf( aFile, "%c %d %d 0\n", loopDir,
(int) (1000 * outline.front()->startPoint.x),
(int) (1000 * outline.front()->startPoint.y) );
fprintf( aFile, "%c %d %d 360\n", loopDir,
(int) (1000 * outline.front()->endPoint.x),
(int) (1000 * outline.front()->endPoint.y) );
}
else
{
fprintf( aFile, "%c %.3f %.3f 0\n", loopDir,
outline.front()->startPoint.x, outline.front()->startPoint.y );
fprintf( aFile, "%c %.3f %.3f 360\n", loopDir,
outline.front()->endPoint.x, outline.front()->endPoint.y );
}
return true;
}
// ensure that the very last point is the same as the very first point
outline.back()-> endPoint = outline.front()->startPoint;
bo = outline.begin();
eo = outline.end();
// for the first item we write out both points
if( (*bo)->angle < MIN_ANG && (*bo)->angle > -MIN_ANG )
{
if( isInch )
{
fprintf( aFile, "%c %d %d 0\n", loopDir,
(int) (1000 * (*bo)->startPoint.x),
(int) (1000 * (*bo)->startPoint.y) );
fprintf( aFile, "%c %d %d 0\n", loopDir,
(int) (1000 * (*bo)->endPoint.x),
(int) (1000 * (*bo)->endPoint.y) );
}
else
{
fprintf( aFile, "%c %.3f %.3f 0\n", loopDir,
(*bo)->startPoint.x, (*bo)->startPoint.y );
fprintf( aFile, "%c %.3f %.3f 0\n", loopDir,
(*bo)->endPoint.x, (*bo)->endPoint.y );
}
}
else
{
if( isInch )
{
fprintf( aFile, "%c %d %d 0\n", loopDir,
(int) (1000 * (*bo)->startPoint.x),
(int) (1000 * (*bo)->startPoint.y) );
fprintf( aFile, "%c %d %d %.2f\n", loopDir,
(int) (1000 * (*bo)->endPoint.x),
(int) (1000 * (*bo)->endPoint.y),
(*bo)->angle );
}
else
{
fprintf( aFile, "%c %.3f %.3f 0\n", loopDir,
(*bo)->startPoint.x, (*bo)->startPoint.y );
fprintf( aFile, "%c %.3f %.3f %.2f\n", loopDir,
(*bo)->endPoint.x, (*bo)->endPoint.y, (*bo)->angle );
}
}
++bo;
// for all other segments we only write out the last point
while( bo != eo )
{
if( isInch )
{
if( (*bo)->angle < MIN_ANG && (*bo)->angle > -MIN_ANG )
{
fprintf( aFile, "%c %d %d 0\n", loopDir,
(int) (1000 * (*bo)->endPoint.x),
(int) (1000 * (*bo)->endPoint.y) );
}
else
{
fprintf( aFile, "%c %d %d %.2f\n", loopDir,
(int) (1000 * (*bo)->endPoint.x),
(int) (1000 * (*bo)->endPoint.y),
(*bo)->angle );
}
}
else
{
if( (*bo)->angle < MIN_ANG && (*bo)->angle > -MIN_ANG )
{
fprintf( aFile, "%c %.5f %.5f 0\n", loopDir,
(*bo)->endPoint.x, (*bo)->endPoint.y );
}
else
{
fprintf( aFile, "%c %.5f %.5f %.2f\n", loopDir,
(*bo)->endPoint.x, (*bo)->endPoint.y, (*bo)->angle );
}
}
++bo;
}
return true;
}
void DXF2IDF::setVariableInt( const std::string& key, int value, int code )
{
// Called for every int variable in the DXF file (e.g. "$INSUNITS").
if( key == "$INSUNITS" ) // Drawing units
{
switch( value )
{
case 1: // inches
m_scale = 25.4;
break;
case 2: // feet
m_scale = 304.8;
break;
case 4: // mm
m_scale = 1.0;
break;
case 5: // centimeters
m_scale = 10.0;
break;
case 6: // meters
m_scale = 1000.0;
break;
case 8: // microinches
m_scale = 2.54e-5;
break;
case 9: // mils
m_scale = 0.0254;
break;
case 10: // yards
m_scale = 914.4;
break;
case 11: // Angstroms
m_scale = 1.0e-7;
break;
case 12: // nanometers
m_scale = 1.0e-6;
break;
case 13: // micrometers
m_scale = 1.0e-3;
break;
case 14: // decimeters
m_scale = 100.0;
break;
default:
// use the default of 1.0 for:
// 0: Unspecified Units
// 3: miles
// 7: kilometers
// 15: decameters
// 16: hectometers
// 17: gigameters
// 18: AU
// 19: lightyears
// 20: parsecs
m_scale = 1.0;
break;
}
return;
}
}
void DXF2IDF::addPolyline(const DL_PolylineData& aData )
{
// Convert DXF Polylines into a series of Lines and Arcs.
// A Polyline (as opposed to a LWPolyline) may be a 3D line or
// even a 3D Mesh. The only type of Polyline which is guaranteed
// to import correctly is a 2D Polyline in X and Y, which is what
// we assume of all Polylines. The width used is the width of the Polyline.
// per-vertex line widths, if present, are ignored.
m_entityParseStatus = 1;
m_entity_flags = aData.flags;
m_entityType = DL_ENTITY_POLYLINE;
}
void DXF2IDF::addVertex( const DL_VertexData& aData )
{
if( m_entityParseStatus == 0 )
return; // Error
if( m_entityParseStatus == 1 ) // This is the first vertex of an entity
{
m_lastCoordinate.x = aData.x * m_scale;
m_lastCoordinate.y = aData.y * m_scale;
m_polylineStart = m_lastCoordinate;
m_bulgeVertex = aData.bulge;
m_entityParseStatus = 2;
return;
}
IDF_POINT seg_end;
seg_end.x = aData.x * m_scale;
seg_end.y = aData.y * m_scale;
insertLine( m_lastCoordinate, seg_end );
m_lastCoordinate = seg_end;
}
void DXF2IDF::endEntity()
{
if( m_entityType == DL_ENTITY_POLYLINE )
{
// Polyline flags bit 0 indicates closed (1) or open (0) polyline
if( m_entity_flags & 1 )
{
if( std::abs( m_bulgeVertex ) < MIN_BULGE )
insertLine( m_lastCoordinate, m_polylineStart );
else
insertArc( m_lastCoordinate, m_polylineStart, m_bulgeVertex );
}
}
m_entityType = 0 ;
m_entity_flags = 0;
m_entityParseStatus = 0;
}
void DXF2IDF::insertLine( const IDF_POINT& aSegStart, const IDF_POINT& aSegEnd )
{
IDF_SEGMENT* seg = new IDF_SEGMENT( aSegStart, aSegEnd );
if( seg )
lines.push_back( seg );
return;
}
void DXF2IDF::insertArc( const IDF_POINT& aSegStart, const IDF_POINT& aSegEnd,
double aBulge )
{
if( aBulge < -MAX_BULGE )
aBulge = -MAX_BULGE;
else if( aBulge > MAX_BULGE )
aBulge = MAX_BULGE;
double ang = 720.0 * atan( aBulge ) / M_PI;
IDF_SEGMENT* seg = new IDF_SEGMENT( aSegStart, aSegEnd, ang, false );
if( seg )
lines.push_back( seg );
return;
}