kicad/include/base_struct.h

609 lines
21 KiB
C++

/*********************************************************************/
/* base_struct.h : Basic classes for most kicad item descriptions */
/*********************************************************************/
#ifndef BASE_STRUCT_H
#define BASE_STRUCT_H
#include "colors.h"
#if defined (DEBUG)
#include <iostream> // needed for Show()
extern std::ostream& operator <<( std::ostream& out, const wxSize& size );
extern std::ostream& operator <<( std::ostream& out, const wxPoint& pt );
#endif
/* Id for class identification, at run time */
enum KICAD_T {
NOT_USED = -1, // the 3d code uses this value
EOT = 0, // search types array terminator (End Of Types)
TYPE_NOT_INIT = 0,
TYPE_PCB,
TYPE_SCREEN, // not really an item, used to identify a screen
// Items in pcb
TYPE_MODULE, // a footprint
TYPE_PAD, // a pad in a footprint
TYPE_DRAWSEGMENT, // a segment not on copper layers
TYPE_TEXTE, // a text on a layer
TYPE_TEXTE_MODULE, // a text in a footprint
TYPE_EDGE_MODULE, // a footprint edge
TYPE_TRACK, // a track segment (segment on a copper layer)
TYPE_VIA, // a via (like atrack segment on a copper layer)
TYPE_ZONE, // a segment used to fill a zome area (segment on a copper layer)
TYPE_MARKER_PCB, // a marker used to show something
TYPE_COTATION, // a dimension (graphic item)
TYPE_MIRE, // a target (graphic item)
TYPE_ZONE_EDGE_CORNER, // in zone outline: a point to define an outline
TYPE_ZONE_CONTAINER, // a zone area
TYPE_BOARD_ITEM_LIST, // a list of board items
// Draw Items in schematic
DRAW_POLYLINE_STRUCT_TYPE,
DRAW_JUNCTION_STRUCT_TYPE,
TYPE_SCH_TEXT,
TYPE_SCH_LABEL,
TYPE_SCH_GLOBALLABEL,
TYPE_SCH_HIERLABEL,
TYPE_SCH_COMPONENT,
DRAW_SEGMENT_STRUCT_TYPE,
DRAW_BUSENTRY_STRUCT_TYPE,
DRAW_SHEET_STRUCT_TYPE,
DRAW_HIERARCHICAL_PIN_SHEET_STRUCT_TYPE,
TYPE_MARKER_SCH,
DRAW_NOCONNECT_STRUCT_TYPE,
DRAW_PART_TEXT_STRUCT_TYPE,
// General
SCREEN_STRUCT_TYPE,
BLOCK_LOCATE_STRUCT_TYPE,
// Draw Items in library component
LIBCOMPONENT_STRUCT_TYPE,
COMPONENT_ARC_DRAW_TYPE,
COMPONENT_CIRCLE_DRAW_TYPE,
COMPONENT_GRAPHIC_TEXT_DRAW_TYPE,
COMPONENT_RECT_DRAW_TYPE,
COMPONENT_POLYLINE_DRAW_TYPE,
COMPONENT_LINE_DRAW_TYPE,
COMPONENT_PIN_DRAW_TYPE,
COMPONENT_FIELD_DRAW_TYPE,
COMPONENT_BEZIER_DRAW_TYPE,
// Special id used to store clearance values (this is not a good idea: TODO: change it)
TYPE_CLEARANCE,
// End value
MAX_STRUCT_TYPE_ID
};
enum SEARCH_RESULT {
SEARCH_QUIT,
SEARCH_CONTINUE
};
class EDA_BaseStruct;
class WinEDA_DrawFrame;
class BOARD;
class EDA_Rect;
class WinEDA_DrawPanel;
/**
* Class INSPECTOR
* is an abstract class that is used to inspect and possibly collect the
* (search) results of Iterating over a list or tree of KICAD_T objects.
* Extend from this class and implement the Inspect function and provide for
* a way for the extension to collect the results of the search/scan data and
* provide them to the caller.
*/
class INSPECTOR
{
public:
virtual ~INSPECTOR()
{
}
/**
* Function Inspect
* is the examining function within the INSPECTOR which is passed to the
* Iterate function. It is used primarily for searching, but not limited to
* that. It can also collect or modify the scanned objects.
*
* @param testItem An EDA_BaseStruct to examine.
* @param testData is arbitrary data needed by the inspector to determine
* if the BOARD_ITEM under test meets its match criteria.
* @return SEARCH_RESULT - SEARCH_QUIT if the Iterator is to stop the scan,
* else SCAN_CONTINUE;
*/
SEARCH_RESULT virtual Inspect( EDA_BaseStruct * testItem,
const void* testData ) = 0;
};
/**
* Class EDA_Rect
* handles the component boundary box.
* This class is similar to wxRect, but some wxRect functions are very curious,
* so I prefer this suitable class
*/
class EDA_Rect
{
public:
wxPoint m_Pos; // Rectangle Origin
wxSize m_Size; // Rectangle Size
public:
EDA_Rect() { };
EDA_Rect( const wxPoint& aPos, const wxSize& aSize ) :
m_Pos( aPos )
, m_Size( aSize )
{ }
wxPoint Centre()
{
return wxPoint( m_Pos.x + (m_Size.x >> 1), m_Pos.y + (m_Size.y >> 1) );
}
void Normalize(); // Ensure the height and width are >= 0
bool Inside( const wxPoint& point ); // Return TRUE if point is in Rect
bool Inside( int x, int y ) { return Inside( wxPoint( x, y ) ); }
wxSize GetSize() { return m_Size; }
int GetX() { return m_Pos.x; }
int GetY() { return m_Pos.y; }
wxPoint GetOrigin() { return m_Pos; }
wxPoint GetPosition() { return m_Pos; }
wxPoint GetEnd() { return wxPoint( GetRight(), GetBottom() ); }
int GetWidth() { return m_Size.x; }
int GetHeight() { return m_Size.y; }
int GetRight() { return m_Pos.x + m_Size.x; }
int GetBottom() { return m_Pos.y + m_Size.y; }
void SetOrigin( const wxPoint& pos ) { m_Pos = pos; }
void SetOrigin( int x, int y ) { m_Pos.x = x; m_Pos.y = y; }
void SetSize( const wxSize& size ) { m_Size = size; }
void SetSize( int w, int h ) { m_Size.x = w; m_Size.y = h; }
void Offset( int dx, int dy ) { m_Pos.x += dx; m_Pos.y += dy; }
void Offset( const wxPoint& offset ) { m_Pos.x += offset.x; m_Pos.y += offset.y; }
void SetX( int val ) { m_Pos.x = val; }
void SetY( int val ) { m_Pos.y = val; }
void SetWidth( int val ) { m_Size.x = val; }
void SetHeight( int val ) { m_Size.y = val; }
void SetEnd( int x, int y ) { SetEnd( wxPoint( x, y ) ); }
void SetEnd( const wxPoint& pos )
{
m_Size.x = pos.x - m_Pos.x; m_Size.y = pos.y - m_Pos.y;
}
/**
* Function Intersects
* @return bool - true if the argument rectangle intersects this rectangle.
*/
bool Intersects( const EDA_Rect aRect ) const;
/**
* Function operator(wxRect)
* overloads the cast operator to return a wxRect
*/
operator wxRect() const { return wxRect( m_Pos, m_Size ); }
EDA_Rect& Inflate( wxCoord dx, wxCoord dy );
/** Function Merge
* Modify Position and Size of this in order to contain the given rect
* mainly used to calculate bounding boxes
* @param aRect = given rect to merge with this
*/
void Merge( const EDA_Rect& aRect );
};
/******************************************************/
/* Basic Classes : used classes are derived from them */
/******************************************************/
class DHEAD;
/**
* Class EDA_BaseStruct
* is a base class for most all the kicad significant classes, used in schematics and boards.
*/
// These define are used for the .m_Flags and .m_UndoRedoStatus member of the class EDA_BaseStruct
#define IS_CHANGED (1 << 0)
#define IS_LINKED (1 << 1)
#define IN_EDIT (1 << 2)
#define IS_MOVED (1 << 3)
#define IS_NEW (1 << 4)
#define IS_RESIZED (1 << 5)
#define IS_DRAGGED (1 << 6)
#define IS_DELETED (1 << 7)
#define IS_WIRE_IMAGE (1 << 8)
#define STARTPOINT (1 << 9)
#define ENDPOINT (1 << 10)
#define SELECTED (1 << 11)
#define SELECTEDNODE (1 << 12) ///< flag indiquant que la structure a deja selectionnee
#define STRUCT_DELETED (1 << 13) ///< Bit flag de Status pour structures effacee
#define CANDIDATE (1 << 14) ///< flag indiquant que la structure est connectee
#define SKIP_STRUCT (1 << 15) ///< flag indiquant que la structure ne doit pas etre traitee
#define DO_NOT_DRAW (1 << 16) ///< Used to disable draw function
#define DRAW_ERASED (1 << 17) ///< draw in background color, used by classs TRACK in gerbview
class EDA_BaseStruct
{
private:
/**
* Run time identification, _keep private_ so it can never be changed after
* a constructor sets it. See comment near SetType() regarding virtual functions.
*/
KICAD_T m_StructType;
protected:
EDA_BaseStruct* Pnext; /* Linked list: Link (next struct) */
EDA_BaseStruct* Pback; /* Linked list: Link (previous struct) */
EDA_BaseStruct* m_Parent; /* Linked list: Link (parent struct) */
EDA_BaseStruct* m_Son; /* Linked list: Link (son struct) */
DHEAD* m_List; ///< which DLIST I am on.
public:
int m_Flags; // flags for editing and other misc. uses
unsigned long m_TimeStamp; // Time stamp used for logical links
int m_Selected; /* Used by block commands, and selective editing */
// member used in undo/redo function
EDA_BaseStruct* m_Image; // Link to an image copy to save a copy of old parmeters values
private:
int m_Status;
private:
void InitVars();
public:
EDA_BaseStruct( EDA_BaseStruct* parent, KICAD_T idType );
EDA_BaseStruct( KICAD_T idType );
virtual ~EDA_BaseStruct() { };
/**
* Function Type
* returns the type of object. This attribute should never be changed after
* a constructor sets it, so there is no public "setter" method.
* @return KICAD_T - the type of object.
*/
KICAD_T Type() const { return m_StructType; }
EDA_BaseStruct* Next() const { return (EDA_BaseStruct*) Pnext; }
EDA_BaseStruct* Back() const { return (EDA_BaseStruct*) Pback; }
EDA_BaseStruct* GetParent() const { return m_Parent; }
EDA_BaseStruct* GetSon() const { return m_Son; }
DHEAD* GetList() const { return m_List; }
void SetNext( EDA_BaseStruct* aNext ) { Pnext = aNext; }
void SetBack( EDA_BaseStruct* aBack ) { Pback = aBack; }
void SetParent( EDA_BaseStruct* aParent ) { m_Parent = aParent; }
void SetSon( EDA_BaseStruct* aSon ) { m_Son = aSon; }
void SetList( DHEAD* aList ) { m_List = aList; }
/* Gestion de l'etat (status) de la structure (active, deleted..) */
int GetState( int type ) const
{
return m_Status & type;
}
void SetState( int type, int state )
{
if( state )
m_Status |= type; // state = ON or OFF
else
m_Status &= ~type;
}
int ReturnStatus() const { return m_Status; }
void SetStatus( int new_status )
{
m_Status = new_status;
}
/**
* Function DisplayInfo
* has knowledge about the frame and how and where to put status information
* about this object into the frame's message panel.
* @param frame A WinEDA_DrawFrame in which to print status information.
*/
virtual void DisplayInfo( WinEDA_DrawFrame* frame )
{
// derived classes may implement this
}
/**
* Function HitTest
* tests if the given wxPoint is within the bounds of this object.
* @param refPos A wxPoint to test
* @return bool - true if a hit, else false
*/
virtual bool HitTest( const wxPoint& refPos )
{
return false; // derived classes should override this function
}
/**
* Function HitTest (overlayed)
* tests if the given EDA_Rect intersect this object.
* For now, an ending point must be inside this rect.
* @param refArea : the given EDA_Rect
* @return bool - true if a hit, else false
*/
virtual bool HitTest( EDA_Rect& refArea )
{
return false; // derived classes should override this function
}
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
virtual EDA_Rect GetBoundingBox()
{
#if defined (DEBUG)
printf( "Missing GetBoundingBox()\n" );
Show( 0, std::cout ); // tell me which classes still need GetBoundingBox support
#endif
// return a zero-sized box per default. derived classes should override this
return EDA_Rect( wxPoint( 0, 0 ), wxSize( 0, 0 ) );
}
/**
* Function IterateForward
* walks through the object tree calling the inspector() on each object
* type requested in scanTypes.
*
* @param listStart The first in a list of EDA_BaseStructs to iterate over.
* @param inspector Is an INSPECTOR to call on each object that is one of
* the requested scanTypes.
* @param testData Is an aid to testFunc, and should be sufficient to
* allow it to fully determine if an item meets the match criteria, but it
* may also be used to collect output.
* @param scanTypes A KICAD_T array that is EOT
* terminated, and provides both the order and interest level of of
* the types of objects to be iterated over.
* @return SEARCH_RESULT - SEARCH_QUIT if the called INSPECTOR returned
* SEARCH_QUIT, else SCAN_CONTINUE;
*/
static SEARCH_RESULT IterateForward( EDA_BaseStruct* listStart,
INSPECTOR* inspector,
const void* testData,
const KICAD_T scanTypes[] );
/**
* Function Visit
* may be re-implemented for each derived class in order to handle
* all the types given by its member data. Implementations should call
* inspector->Inspect() on types in scanTypes[], and may use IterateForward()
* to do so on lists of such data.
* @param inspector An INSPECTOR instance to use in the inspection.
* @param testData Arbitrary data used by the inspector.
* @param scanTypes Which KICAD_T types are of interest and the order
* is significant too, terminated by EOT.
* @return SEARCH_RESULT - SEARCH_QUIT if the Iterator is to stop the scan,
* else SCAN_CONTINUE, and determined by the inspector.
*/
virtual SEARCH_RESULT Visit( INSPECTOR* inspector, const void* testData,
const KICAD_T scanTypes[] );
/**
* Function GetClass
* returns the class name.
* @return wxString
*/
virtual wxString GetClass() const
{
return wxT( "EDA_BaseStruct" );
}
#if defined (DEBUG)
/**
* Function Show
* is used to output the object tree, currently for debugging only.
* @param nestLevel An aid to prettier tree indenting, and is the level
* of nesting of this object within the overall tree.
* @param os The ostream& to output to.
*/
virtual void Show( int nestLevel, std::ostream& os );
/**
* Function NestedSpace
* outputs nested space for pretty indenting.
* @param nestLevel The nest count
* @param os The ostream&, where to output
* @return std::ostream& - for continuation.
**/
static std::ostream& NestedSpace( int nestLevel, std::ostream& os );
#endif
};
// Graphic Text justify:
// Values -1,0,1 are used in computations, do not change them
enum GRTextHorizJustifyType {
GR_TEXT_HJUSTIFY_LEFT = -1,
GR_TEXT_HJUSTIFY_CENTER = 0,
GR_TEXT_HJUSTIFY_RIGHT = 1
};
enum GRTextVertJustifyType {
GR_TEXT_VJUSTIFY_TOP = -1,
GR_TEXT_VJUSTIFY_CENTER = 0,
GR_TEXT_VJUSTIFY_BOTTOM = 1
};
/* Options to show solid segments (segments, texts...) */
enum GRTraceMode {
FILAIRE = 0, // segments are drawn as lines
FILLED, // normal mode: segments have thickness
SKETCH // skect mode: segments have thickness, but are not filled
};
/**
* Enum FILL_T
* is the set of fill types used in plotting or drawing enclosed areas.
*/
enum FILL_T {
NO_FILL, // Poly, Square, Circle, Arc = option No Fill
FILLED_SHAPE, /* Poly, Square, Circle, Arc = option Fill
* with current color ("Solid shape") */
FILLED_WITH_BG_BODYCOLOR, /* Poly, Square, Circle, Arc = option Fill
* with background body color, translucent
* (texts inside this shape can be seen)
* not filled in B&W mode when plotting or
* printing */
};
#define DEFAULT_SIZE_TEXT 60 /* default text height (in mils or 1/1000") */
/**
* Class EDA_TextStruct
* is a basic class to handle texts (labels, texts on components or footprints ..)
* not used directly.
* The text classes are derived from EDA_BaseStruct and EDA_TextStruct
*/
class EDA_TextStruct
{
public:
wxString m_Text; /* text! */
wxPoint m_Pos; /* XY position of anchor text. */
wxSize m_Size; /* XY size of text */
int m_Width; /* pen size used to draw this text */
int m_Orient; /* Orient in 0.1 degrees */
bool m_Mirror; /* Display Normal / mirror */
int m_Attributs; /* flags (visible...) */
bool m_Italic; /* true to simulate (or use if exists) an italic font... */
bool m_Bold; /* true to simulate a bold font ... */
GRTextHorizJustifyType m_HJustify; /* Horiz justification */
GRTextVertJustifyType m_VJustify; /* Vertical justification */
bool m_MultilineAllowed; /* true to use multiline option, false to use only single line text
* Single line is faster in calculations than multiline */
public:
EDA_TextStruct( const wxString& text = wxEmptyString );
virtual ~EDA_TextStruct();
int GetLength() const { return m_Text.Length(); };
/** Function Draw
* @param aPanel = the current DrawPanel
* @param aDC = the current Device Context
* @param aOffset = draw offset (usually (0,0))
* @param EDA_Colors aColor = text color
* @param aDrawMode = GR_OR, GR_XOR.., -1 to use the current mode.
* @param GRTraceMode aDisplay_mode = FILAIRE, FILLED or SKETCH
* @param EDA_Colors aAnchor_color = anchor color ( UNSPECIFIED_COLOR = do not draw anchor ).
*/
void Draw( WinEDA_DrawPanel* aPanel, wxDC* aDC,
const wxPoint& aOffset, EDA_Colors aColor,
int aDrawMode, GRTraceMode aDisplay_mode = FILAIRE,
EDA_Colors aAnchor_color = UNSPECIFIED_COLOR );
private:
/** Function DrawOneLineOfText
* Draw a single text line.
* Used to draw each line of this EDA_TextStruct, that can be multiline
* @param aPanel = the current DrawPanel
* @param aDC = the current Device Context
* @param aOffset = draw offset (usually (0,0))
* @param EDA_Colors aColor = text color
* @param aDrawMode = GR_OR, GR_XOR.., -1 to use the current mode.
* @param aFillMode = FILAIRE, FILLED or SKETCH
* @param EDA_Colors aAnchor_color = anchor color ( UNSPECIFIED_COLOR = do not draw anchor ).
* @param EDA_Colors aText = the single line of text to draw.
* @param EDA_Colors aPos = the position of this line ).
*/
void DrawOneLineOfText( WinEDA_DrawPanel* aPanel, wxDC* aDC,
const wxPoint& aOffset, EDA_Colors aColor,
int aDrawMode, GRTraceMode aFillMode,
EDA_Colors aAnchor_color, wxString& aText,
wxPoint aPos );
public:
/**
* Function TextHitTest
* tests if the given wxPoint is within the bounds of this object.
* @param ref_pos A wxPoint to test
* @return bool - true if a hit, else false
*/
bool TextHitTest( const wxPoint& ref_pos );
/**
* Function TextHitTest (overlayed)
* tests if the given EDA_Rect intersect this object.
* For now, the anchor must be inside this rect.
* @param refArea : the given EDA_Rect
* @return bool - true if a hit, else false
*/
bool TextHitTest( EDA_Rect& refArea );
/**
* Function LenSize
* @return the text lenght in internal units
* @param aLine : the line of text to consider.
* For single line text, this parameter is always m_Text
*/
int LenSize(const wxString & aLine) const;
/** Function GetTextBox
* useful in multiline texts to calculate the full text or a line area (for zones filling, locate functions....)
* @return the rect containing the line of text (i.e. the position and the size of one line)
* this rectangle is calculated for 0 orient text. if orient is not 0 the rect must be rotated to match the physical area
* @param aLine : the line of text to consider.
* for single line text, aLine is unused
* If aLine == -1, the full area (considering all lines) is returned
*/
EDA_Rect GetTextBox( int aLine = -1);
/** Function GetInterline
* return the distance between 2 text lines
* has meaning only for multiline texts
*/
int GetInterline()
{
return (( m_Size.y * 13 ) / 10) + m_Width;
}
};
#endif /* BASE_STRUCT_H */