haskal
/
kicad
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
kicad/include/wxPcbStruct.h

923 lines
40 KiB
C++
Raw Blame History

/***********************************************************/
/* wxPcbStruct.h: */
/* Classes used in pcbnew, cvpcb and gerbview */
/***********************************************************/
#ifndef WXPCB_STRUCT_H
#define WXPCB_STRUCT_H
#include <vector>
#ifndef PCB_INTERNAL_UNIT
#define PCB_INTERNAL_UNIT 10000
#endif
/* Forward declarations of classes. */
class WinEDA_DrawPanel;
class WinEDA_DrawFrame;
#include "base_struct.h"
class PCB_SCREEN;
class WinEDA_GerberFrame; // GERBER viewer main frame
class WinEDA_Toolbar;
class WinEDA_CvpcbFrame;
class WinEDA_PcbFrame;
class WinEDA_ModuleEditFrame;
// Used but not defined here:
class BOARD;
class TEXTE_PCB;
class MODULE;
class TRACK;
class SEGZONE;
class SEGVIA;
class D_PAD;
class TEXTE_MODULE;
class MIREPCB;
class COTATION;
class EDGE_MODULE;
class WinEDA3D_DrawFrame;
class DRC;
class ZONE_CONTAINER;
/******************************************************************/
/* class WinEDA_BasePcbFrame: Basic class for pcbnew and gerbview */
/******************************************************************/
class WinEDA_BasePcbFrame : public WinEDA_DrawFrame
{
public:
BOARD* m_Pcb;
bool m_DisplayPadFill; // How show pads
bool m_DisplayPadNum; // show pads numbers
int m_DisplayModEdge; // How show module drawings
int m_DisplayModText; // How show module texts
bool m_DisplayPcbTrackFill; /* FALSE : tracks are show in sketch mode, TRUE = filled */
WinEDA3D_DrawFrame* m_Draw3DFrame;
protected:
GENERAL_COLLECTOR* m_Collector;
public:
WinEDA_BasePcbFrame( wxWindow* father, WinEDA_App* parent, int idtype,
const wxString& title,
const wxPoint& pos, const wxSize& size,
long style = KICAD_DEFAULT_DRAWFRAME_STYLE );
~WinEDA_BasePcbFrame();
/**
* Function SetBOARD
* sets the m_Pcb member in such as way as to ensure deleting any previous
* BOARD.
* @param aBoard The BOARD to put into the frame.
*/
void SetBOARD( BOARD* aBoard );
// General
virtual void OnCloseWindow( wxCloseEvent& Event ) = 0;
virtual void Process_Special_Functions( wxCommandEvent& event ) = 0;
virtual void RedrawActiveWindow( wxDC* DC, bool EraseBg ) = 0;
virtual void ReCreateHToolbar() = 0;
virtual void ReCreateVToolbar() = 0;
virtual void OnLeftClick( wxDC* DC, const wxPoint& MousePos ) = 0;
virtual void OnLeftDClick( wxDC* DC, const wxPoint& MousePos ) = 0;
virtual bool OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu ) = 0;
virtual void ReCreateMenuBar();
PCB_SCREEN* GetScreen() const { return (PCB_SCREEN*) WinEDA_DrawFrame::GetBaseScreen(); }
BASE_SCREEN* GetBaseScreen() const;
int BestZoom();
void Show3D_Frame( wxCommandEvent& event );
virtual void GeneralControle( wxDC* DC, wxPoint Mouse );
// Undo and redo functions
public:
virtual void SaveCopyInUndoList( EDA_BaseStruct* ItemToCopy,
int flag_type_command = 0 );
private:
virtual void GetComponentFromUndoList();
virtual void GetComponentFromRedoList();
public:
// Read/write fonctions:
EDA_BaseStruct* ReadDrawSegmentDescr( FILE* File, int* LineNum );
int ReadListeSegmentDescr( FILE* File,
TRACK* PtSegm, int StructType,
int* LineNum, int NumSegm );
int ReadSetup( FILE* File, int* LineNum );
int ReadGeneralDescrPcb( FILE* File, int* LineNum );
// PCB handling
bool Clear_Pcb( bool query );
/**
* Function PcbGeneralLocateAndDisplay
* searches for an item under the mouse cursor.
* Items are searched first on the current working layer.
* If nothing found, an item will be searched without layer restriction. If
* more than one item is found meeting the current working layer criterion, then
* a popup menu is shown which allows the user to pick which item he/she is
* interested in. Once an item is chosen, then it is make the "current item"
* and the status window is updated to reflect this.
*
* @param aHotKeyCode The hotkey which relates to the caller and determines the
* type of search to be performed. If zero, then the mouse tools will be
* tested instead.
*/
BOARD_ITEM* PcbGeneralLocateAndDisplay( int aHotKeyCode = 0 );
void ProcessItemSelection( wxCommandEvent& event );
/**
* Function SetCurItem
* sets the currently selected item and displays it in the MsgPanel.
* If the given item is NULL then the MsgPanel is erased and there is no
* currently selected item. This function is intended to make the process
* of "selecting" an item more formal, and to indivisibly tie the operation
* of selecting an item to displaying it using BOARD_ITEM::Display_Infos().
* @param aItem The BOARD_ITEM to make the selected item or NULL if none.
*/
void SetCurItem( BOARD_ITEM* aItem );
BOARD_ITEM* GetCurItem();
/**
* Function GetCollectorsGuide
* @return GENERAL_COLLECTORS_GUIDE - that considers the global configuration options.
*/
GENERAL_COLLECTORS_GUIDE GetCollectorsGuide();
/**
* Function CursorGoto
* positions the cursor at a given coordinate and reframes the drawing if the
* requested point is out of view.
* @param aPos The point to go to.
*/
void CursorGoto( const wxPoint& aPos );
/* Place un repere sur l'ecran au point de coordonnees PCB pos */
void place_marqueur( wxDC* DC, const wxPoint& pos, char* pt_bitmap,
int DrawMode, int color, int type );
// Gestion des modules
void InstallModuleOptionsFrame( MODULE* Module,
wxDC* DC, const wxPoint& pos );
MODULE* Copie_Module( MODULE* module );
MODULE* Exchange_Module( wxWindow* winaff,
MODULE* old_module,
MODULE* new_module );
int Save_1_Module( const wxString& LibName, MODULE* Module,
bool Overwrite, bool DisplayDialog );
void Archive_Modules( const wxString& LibName, bool NewModulesOnly );
MODULE* Select_1_Module_From_BOARD( BOARD* Pcb );
MODULE* GetModuleByName();
// Modules (footprints)
MODULE* Create_1_Module( wxDC* DC, const wxString& module_name );
void Edit_Module( MODULE* module, wxDC* DC );
void Rotate_Module( wxDC* DC,
MODULE* module,
int angle,
bool incremental );
void Place_Module( MODULE* module, wxDC* DC );
void InstallExchangeModuleFrame( MODULE* ExchangeModuleModule,
wxDC* DC, const wxPoint& pos );
// module texts
void RotateTextModule( TEXTE_MODULE* Text, wxDC* DC );
void DeleteTextModule( TEXTE_MODULE* Text, wxDC* DC );
void PlaceTexteModule( TEXTE_MODULE* Text, wxDC* DC );
void StartMoveTexteModule( TEXTE_MODULE* Text, wxDC* DC );
TEXTE_MODULE* CreateTextModule( MODULE* Module, wxDC* DC );
void InstallPadOptionsFrame( D_PAD* pad, wxDC* DC, const wxPoint& pos );
void InstallTextModOptionsFrame( TEXTE_MODULE* TextMod,
wxDC* DC, const wxPoint& pos );
// Pads sur modules
void AddPad( MODULE* Module, bool draw );
void DeletePad( D_PAD* Pad, wxDC* DC );
void StartMovePad( D_PAD* Pad, wxDC* DC );
void RotatePad( D_PAD* Pad, wxDC* DC );
void PlacePad( D_PAD* Pad, wxDC* DC );
void Export_Pad_Settings( D_PAD* aPad );
void Import_Pad_Settings( D_PAD* aPad, bool aDraw );
void Global_Import_Pad_Settings( D_PAD* aPad, bool aDraw );
// loading footprints
MODULE* Get_Librairie_Module( wxWindow* winaff,
const wxString& library,
const wxString& ModuleName,
bool show_msg_err );
wxString Select_1_Module_From_List(
WinEDA_DrawFrame* active_window, const wxString& Library,
const wxString& Mask, const wxString& KeyWord );
MODULE* Load_Module_From_Library( const wxString& library, wxDC* DC );
// ratsnest functions
void Compile_Ratsnest( wxDC* DC, bool affiche ); /* Recalcul complet du chevelu */
void ReCompile_Ratsnest_After_Changes( wxDC* DC );
int Test_1_Net_Ratsnest( wxDC* DC, int net_code );
char* build_ratsnest_module( wxDC* DC, MODULE* Module );
void trace_ratsnest_module( wxDC* DC );
void Build_Board_Ratsnest( wxDC* DC );
void DrawGeneralRatsnest( wxDC* DC, int net_code = 0 );
void trace_ratsnest_pad( wxDC* DC );
void recalcule_pad_net_code(); /* compute and update the PAD net codes */
void build_liste_pads();
int* build_ratsnest_pad( EDA_BaseStruct* ref,
const wxPoint& refpos,
bool init );
void Tst_Ratsnest( wxDC* DC, int ref_netcode );
void test_connexions( wxDC* DC );
void test_1_net_connexion( wxDC* DC, int net_code );
void reattribution_reference_piste( int affiche );
// Plotting
void ToPlotter( wxCommandEvent& event );
void Plot_Serigraphie( int format_plot, FILE* File, int masque_layer );
void Genere_GERBER( const wxString& FullFileName, int Layer,
bool PlotOriginIsAuxAxis );
void Genere_HPGL( const wxString& FullFileName, int Layer );
void Genere_PS( const wxString& FullFileName, int Layer, bool useA4 );
void Plot_Layer_HPGL( FILE* File, int masque_layer,
int garde, int tracevia, int modetrace );
void Plot_Layer_GERBER( FILE* File, int masque_layer,
int garde, int tracevia );
int Gen_D_CODE_File( FILE* file );
void Plot_Layer_PS( FILE* File, int masque_layer,
int garde, int tracevia, int modetrace );
/* Block operations: */
void Block_Delete( wxDC* DC );
void Block_Rotate( wxDC* DC );
void Block_Invert( wxDC* DC );
void Block_Move( wxDC* DC );
void Block_Duplicate( wxDC* DC );
// layerhandling:
// (See pcbnew/sel_layer.cpp for description of why null_layer parameter is provided)
int SelectLayer( int default_layer, int min_layer, int max_layer,
bool null_layer = false );
void SelectLayerPair();
virtual void SwitchLayer( wxDC* DC, int layer );
// divers
void AddHistory( int value, KICAD_T type ); // Add value in data list history
void InstallGridFrame( const wxPoint& pos );
DECLARE_EVENT_TABLE()
};
/*****************************************************/
/* class WinEDA_PcbFrame: public WinEDA_BasePcbFrame */
/*****************************************************/
class WinEDA_PcbFrame : public WinEDA_BasePcbFrame
{
public:
WinEDAChoiceBox* m_SelLayerBox;
WinEDAChoiceBox* m_SelTrackWidthBox;
WinEDAChoiceBox* m_SelViaSizeBox;
private:
bool m_SelTrackWidthBox_Changed;
bool m_SelViaSizeBox_Changed;
wxMenu* m_FilesMenu;
DRC* m_drc; ///< the DRC controller, see drc.cpp
// we'll use lower case function names for private member functions.
void createPopUpMenuForZones( ZONE_CONTAINER* edge_zone, wxMenu* aPopMenu );
void createPopUpMenuForFootprints( MODULE* aModule, wxMenu* aPopMenu );
void createPopUpMenuForFpTexts( TEXTE_MODULE* aText, wxMenu* aPopMenu );
void createPopUpMenuForFpPads( D_PAD* aPad, wxMenu* aPopMenu );
void createPopupMenuForTracks( TRACK* aTrack, wxMenu* aPopMenu );
void createPopUpMenuForTexts( TEXTE_PCB* Text, wxMenu* menu );
void createPopUpBlockMenu( wxMenu* menu );
public:
WinEDA_PcbFrame( wxWindow* father, WinEDA_App* parent, const wxString& title,
const wxPoint& pos, const wxSize& size,
long style = KICAD_DEFAULT_DRAWFRAME_STYLE );
~WinEDA_PcbFrame();
void GetKicadAbout( wxCommandEvent& event );
// Configurations:
void InstallConfigFrame( const wxPoint& pos );
void Process_Config( wxCommandEvent& event );
void Update_config( wxWindow* displayframe );
void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct );
bool OnHotkeyDeleteItem( wxDC* DC, EDA_BaseStruct* DrawStruct );
void OnCloseWindow( wxCloseEvent& Event );
void Process_Special_Functions( wxCommandEvent& event );
void ProcessMuWaveFunctions( wxCommandEvent& event );
void MuWaveCommand( wxDC* DC, const wxPoint& MousePos );
void RedrawActiveWindow( wxDC* DC, bool EraseBg );
void ReCreateHToolbar();
void ReCreateAuxiliaryToolbar();
void ReCreateVToolbar();
void ReCreateAuxVToolbar();
void ReCreateOptToolbar();
void ReCreateMenuBar();
WinEDAChoiceBox* ReCreateLayerBox( WinEDA_Toolbar* parent );
/**
* Function UpdateToolbarLayerInfo
* updates the currently selected layer in the layer listbox and
* the colored icon in the toolbar.
*/
void UpdateToolbarLayerInfo();
void PrepareLayerIndicator();
void OnLeftClick( wxDC* DC, const wxPoint& MousePos );
void OnLeftDClick( wxDC* DC, const wxPoint& MousePos );
/**
* Function OnRightClick
* populates a popup menu with the choices appropriate for the current context.
* The caller will add the ZOOM menu choices afterwards.
* @param aMousePos The current mouse position
* @param aPopMenu The menu to add to.
*/
bool OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu );
void OnSelectOptionToolbar( wxCommandEvent& event );
void ToolOnRightClick( wxCommandEvent& event );
/* Gestion generale des operations sur block */
int ReturnBlockCommand( int key );
void HandleBlockPlace( wxDC* DC );
int HandleBlockEnd( wxDC* DC );
void SetToolbars();
void Process_Settings( wxCommandEvent& event );
void InstallPcbOptionsFrame( const wxPoint& pos, wxDC* DC, int id );
void InstallPcbGlobalDeleteFrame( const wxPoint& pos );
void GenModulesPosition( wxCommandEvent& event );
void GenModuleReport( wxCommandEvent& event );
void InstallDrillFrame( wxCommandEvent& event );
void ToPostProcess( wxCommandEvent& event );
void Files_io( wxCommandEvent& event );
int LoadOnePcbFile( const wxString& FileName, bool Append );
int ReadPcbFile( FILE* File, bool Append );
bool SavePcbFile( const wxString& FileName );
int SavePcbFormatAscii( FILE* File );
bool WriteGeneralDescrPcb( FILE* File );
bool RecreateCmpFileFromBoard();
void ExportToGenCAD( wxCommandEvent& event );
/**
* Function ExporttoSPECCTRA
* will export the current BOARD to a specctra dsn file. See
* See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the
* specification.
*/
void ExportToSpecctra( wxCommandEvent& event );
/**
* Function ImportSpecctraSession
* will import a specctra *.ses file and use it to relocate MODULEs and
* to replace all vias and tracks in an existing and loaded BOARD.
* See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the
* specification.
*/
void ImportSpecctraSession( wxCommandEvent& event );
/**
* Function ImportSpecctraDesign
* will import a specctra *.dsn file and use it to replace an entire BOARD.
* The new board will not have any graphics, only components, tracks and vias.
* See http://www.autotraxeda.com/docs/SPECCTRA/SPECCTRA.pdf for the
* specification.
*/
void ImportSpecctraDesign( wxCommandEvent& event );
/**
* Function Access_to_External_Tool
* Run an external tool (like freeroute )
*/
void Access_to_External_Tool( wxCommandEvent& event );
/* Fonctions specifiques */
MODULE* ListAndSelectModuleName();
void Liste_Equipot( wxCommandEvent& event );
void Swap_Layers( wxCommandEvent& event );
void Install_Test_DRC_Frame( wxDC* DC );
void Trace_Pcb( wxDC* DC, int mode );
// Handling texts on the board
void Rotate_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
TEXTE_PCB* Create_Texte_Pcb( wxDC* DC );
void Delete_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
void StartMoveTextePcb( TEXTE_PCB* TextePcb, wxDC* DC );
void Place_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
void InstallTextPCBOptionsFrame( TEXTE_PCB* TextPCB,
wxDC* DC, const wxPoint& pos );
// Graphic Segments type DRAWSEGMENT
void Start_Move_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC );
void Place_DrawItem( DRAWSEGMENT* drawitem, wxDC* DC );
// Footprint edition (see also WinEDA_BasePcbFrame)
void StartMove_Module( MODULE* module, wxDC* DC );
bool Delete_Module( MODULE* module, wxDC* DC, bool aAskBeforeDeleting );
// loading modules: see WinEDA_BasePcbFrame
// Board handling
void Erase_Zones( bool query );
void Erase_Segments_Pcb( bool is_edges, bool query );
void Erase_Pistes( wxDC* DC, int masque_type, bool query );
void Erase_Modules( bool query );
void Erase_Textes_Pcb( bool query );
void Erase_Marqueurs();
void UnDeleteItem( wxDC* DC );
void RemoveStruct( BOARD_ITEM* Item, wxDC* DC );
void Via_Edit_Control( wxDC* DC, int command_type, SEGVIA* via );
// Hightlight functions:
int Select_High_Light( wxDC* DC );
void Hight_Light( wxDC* DC );
void DrawHightLight( wxDC* DC, int NetCode );
// Track and via edition:
void DisplayTrackSettings();
/**
* Function Other_Layer_Route
* operates in one of two ways. If argument track is NULL, then swap the active
* layer between m_Route_Layer_TOP and m_Route_Layer_BOTTOM. If a track is
* in progress (track is not NULL), and if DRC allows it, place a via on the end
* of the current track, and then swap the current active layer and start a new
* segment on the new layer.
* @param track A TRACK* to append the via to or NULL.
* @param DC A device context to draw on.
* @return bool - true if the operation was successful, else false such as
* the case where DRC would not allow a via.
*/
bool Other_Layer_Route( TRACK* track, wxDC* DC );
void Affiche_PadsNoConnect( wxDC* DC );
void Affiche_Status_Net( wxDC* DC );
TRACK* Delete_Segment( wxDC* DC, TRACK* Track );
void Delete_Track( wxDC* DC, TRACK* Track );
void Delete_net( wxDC* DC, TRACK* Track );
void Remove_One_Track( wxDC* DC, TRACK* pt_segm );
bool Resize_Pistes_Vias( wxDC* DC, bool Track, bool Via );
void Edit_Net_Width( wxDC* DC, int Netcode );
void Edit_Track_Width( wxDC* DC, TRACK* Track );
int Edit_TrackSegm_Width( wxDC* DC, TRACK* segm );
TRACK* Begin_Route( TRACK* track, wxDC* DC );
void End_Route( TRACK* track, wxDC* DC );
void ExChange_Track_Layer( TRACK* pt_segm, wxDC* DC );
void Attribut_Segment( TRACK* track, wxDC* DC, bool Flag_On );
void Attribut_Track( TRACK* track, wxDC* DC, bool Flag_On );
void Attribut_net( wxDC* DC, int net_code, bool Flag_On );
void Start_MoveOneNodeOrSegment( TRACK* track, wxDC* DC, int command );
bool PlaceDraggedTrackSegment( TRACK* Track, wxDC* DC );
bool MergeCollinearTracks( TRACK* track, wxDC* DC, int end );
void Start_DragTrackSegmentAndKeepSlope( TRACK* track, wxDC* DC );
void SwitchLayer( wxDC* DC, int layer );
int Add_45_degrees_Segment( wxDC* DC, TRACK* pt_segm );
bool Genere_Pad_Connexion( wxDC* DC, int layer );
// zone handling
/** Function Delete_Zone_Fill
* Remove the zone filling which include the segment aZone, or the zone which have the given time stamp.
* A zone is a group of segments which have the same TimeStamp
* @param DC = current Device Context (can be NULL)
* @param aZone = zone segment within the zone to delete. Can be NULL
* @param aTimestamp = Timestamp for the zone to delete, used if aZone == NULL
*/
void Delete_Zone_Fill( wxDC* DC, SEGZONE* Track, long aTimestamp = 0 );
/** Function Delete_LastCreatedCorner
* Used only while creating a new zone outline
* Remove and delete the current outline segment in progress
* @return 0 if no corner in list, or corner number
*/
int Delete_LastCreatedCorner( wxDC* DC);
/**
* Function Begin_Zone
* initiates a zone edge creation process,
* or terminates the current zone edge and creates a new zone edge stub
*/
int Begin_Zone( wxDC* DC );
/**
* Function End_Zone
* terminates (if no DRC error ) the zone edge creation process
* @param DC = current Device Context
* @return true if Ok, false if DRC error
*/
bool End_Zone( wxDC* DC );
/** Function Fill_Zone()
* Calculate the zone filling for the outline zone_container
* The zone outline is a frontier, and can be complex (with holes)
* The filling starts from starting points like pads, tracks.
* If exists the old filling is removed
* @param DC = current Device Context
* @param zone_container = zone to fill
* @param verbose = true to show error messages
* @return error level (0 = no error)
*/
int Fill_Zone( wxDC* DC, ZONE_CONTAINER* zone_container, bool verbose = TRUE );
/** Function Fill_All_Zones()
* Fill all zones on the board
* The old fillings are removed
* @param frame = reference to the main frame
* @param DC = current Device Context
* @param verbose = true to show error messages
* @return error level (0 = no error)
*/
int Fill_All_Zones( wxDC* DC, bool verbose = TRUE );
/**
* Function Add_Zone_Cutout
* Add a cutout zone to a given zone outline
* @param DC = current Device Context
* @param zone_container = parent zone outline
*/
void Add_Zone_Cutout( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Add_Similar_Zone
* Add a zone to a given zone outline.
* if the zones are overlappeing they will be merged
* @param DC = current Device Context
* @param zone_container = parent zone outline
*/
void Add_Similar_Zone( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Edit_Zone_Params
* Edit params (layer, clearance, ...) for a zone outline
*/
void Edit_Zone_Params( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Start_Move_Zone_Corner
* Prepares a move corner in a zone outline,
* called from a move corner command (IsNewCorner = false),
* or a create new cornet command (IsNewCorner = true )
*/
void Start_Move_Zone_Corner( wxDC* DC,
ZONE_CONTAINER* zone_container,
int corner_id,
bool IsNewCorner );
/**
* Function Start_Move_Zone_Corner
* Prepares a drag edge in an existing zone outline,
*/
void Start_Move_Zone_Drag_Outline_Edge( wxDC* DC,
ZONE_CONTAINER* zone_container,
int corner_id );
/**
* Function End_Move_Zone_Corner_Or_Outlines
* Terminates a move corner in a zone outline, or a move zone outlines
* @param DC = current Device Context (can be NULL)
* @param zone_container: the given zone
*/
void End_Move_Zone_Corner_Or_Outlines( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function End_Move_Zone_Corner_Or_Outlines
* Remove the currently selected corner in a zone outline
* the .m_CornerSelection is used as corner selection
*/
void Remove_Zone_Corner( wxDC* DC, ZONE_CONTAINER* zone_container );
/** Function Delete_Zone
* Remove the zone which include the segment aZone, or the zone which have the given time stamp.
* A zone is a group of segments which have the same TimeStamp
* @param DC = current Device Context (can be NULL)
* @param zone_container = zone to modify
* the member .m_CornerSelection is used to find the outline to remove.
* if the outline is the main outline, all the zone is removed
* otherwise, the hole is deleted
*/
void Delete_Zone_Contour( wxDC* DC, ZONE_CONTAINER* zone_container );
/**
* Function Start_Move_Zone_Outlines
* Initialise parametres to move an existing zone outlines.
* @param DC = current Device Context (can be NULL)
* @param zone_container: the given zone to move
*/
void Start_Move_Zone_Outlines( wxDC* DC, ZONE_CONTAINER* zone_container );
// Target handling
MIREPCB* Create_Mire( wxDC* DC );
void Delete_Mire( MIREPCB* MirePcb, wxDC* DC );
void StartMove_Mire( MIREPCB* MirePcb, wxDC* DC );
void Place_Mire( MIREPCB* MirePcb, wxDC* DC );
void InstallMireOptionsFrame( MIREPCB* MirePcb, wxDC* DC, const wxPoint& pos );
// Graphic segments type DRAWSEGMENT handling:
DRAWSEGMENT* Begin_DrawSegment( DRAWSEGMENT* Segment, int shape, wxDC* DC );
void End_Edge( DRAWSEGMENT* Segment, wxDC* DC );
void Drawing_SetNewWidth( DRAWSEGMENT* DrawSegm, wxDC* DC );
void Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC );
void Delete_Drawings_All_Layer( DRAWSEGMENT* Segment, wxDC* DC );
// Dimension handling:
void Install_Edit_Cotation( COTATION* Cotation, wxDC* DC, const wxPoint& pos );
COTATION* Begin_Cotation( COTATION* Cotation, wxDC* DC );
void Delete_Cotation( COTATION* Cotation, wxDC* DC );
// netlist handling:
void InstallNetlistFrame( wxDC* DC, const wxPoint& pos );
// Autoplacement:
void AutoPlace( wxCommandEvent& event );
/** function OnOrientFootprints
* install the dialog box for the comman Orient Footprints
*/
void OnOrientFootprints( void );
/** function ReOrientModules
* Set the orientation of footprints
* @param ModuleMask = mask (wildcard allowed) selection
* @param Orient = new orientation
* @param include_fixe = true to orient locked footprints
*/
void ReOrientModules( const wxString& ModuleMask, int Orient,
bool include_fixe );
void FixeModule( MODULE* Module, bool Fixe );
void AutoMoveModulesOnPcb( wxDC* DC, bool PlaceModulesHorsPcb );
bool SetBoardBoundaryBoxFromEdgesOnly();
void AutoPlaceModule( MODULE* Module, int place_mode, wxDC* DC );
int RecherchePlacementModule( MODULE* Module, wxDC* DC );
void GenModuleOnBoard( MODULE* Module );
float Compute_Ratsnest_PlaceModule( wxDC* DC );
int GenPlaceBoard();
void DrawInfoPlace( wxDC* DC );
// Autorouting:
int Solve( wxDC* DC, int two_sides );
void Reset_Noroutable( wxDC* DC );
void Autoroute( wxDC* DC, int mode );
void ReadAutoroutedTracks( wxDC* DC );
void GlobalRoute( wxDC* DC );
// divers
void Show_1_Ratsnest( EDA_BaseStruct* item, wxDC* DC );
void Ratsnest_On_Off( wxDC* DC );
void Clean_Pcb( wxDC* DC );
BOARD_ITEM* SaveItemEfface( BOARD_ITEM* PtItem, int nbitems );
void InstallFindFrame( const wxPoint& pos, wxDC* DC );
/**
* Function SendMessageToEESCHEMA
* sends a message to the schematic editor so that it may move its cursor
* to a part with the same reference as the objectToSync
* @param objectToSync The object whose reference is used to syncronize eeschema.
*/
void SendMessageToEESCHEMA( BOARD_ITEM* objectToSync );
/* Micro waves functions */
void Edit_Gap( wxDC* DC, MODULE* Module );
MODULE* Create_MuWaveBasicShape( wxDC* DC, const wxString& name, int pad_count );
MODULE* Create_MuWaveComponent( wxDC* DC, int shape_type );
MODULE* Create_MuWavePolygonShape( wxDC* DC );
void Begin_Self( wxDC* DC );
MODULE* Genere_Self( wxDC* DC );
DECLARE_EVENT_TABLE()
};
/****************************************************/
/* class WinEDA_GerberFrame: public WinEDA_PcbFrame */
/****************************************************/
class WinEDA_GerberFrame : public WinEDA_BasePcbFrame
{
public:
WinEDAChoiceBox* m_SelLayerBox;
WinEDAChoiceBox* m_SelLayerTool;
private:
wxMenu* m_FilesMenu;
public:
WinEDA_GerberFrame( wxWindow* father, WinEDA_App* parent, const wxString& title,
const wxPoint& pos, const wxSize& size,
long style = KICAD_DEFAULT_DRAWFRAME_STYLE );
~WinEDA_GerberFrame();
void Update_config();
void OnCloseWindow( wxCloseEvent& Event );
void Process_Special_Functions( wxCommandEvent& event );
void RedrawActiveWindow( wxDC* DC, bool EraseBg );
void ReCreateHToolbar();
void ReCreateVToolbar();
void ReCreateOptToolbar();
void ReCreateMenuBar();
void OnLeftClick( wxDC* DC, const wxPoint& MousePos );
void OnLeftDClick( wxDC* DC, const wxPoint& MousePos );
bool OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu );
int BestZoom(); // Retourne le meilleur zoom
void OnSelectOptionToolbar( wxCommandEvent& event );
void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct );
BOARD_ITEM* GerberGeneralLocateAndDisplay();
BOARD_ITEM* Locate( int typeloc );
void SetToolbars();
void Process_Settings( wxCommandEvent& event );
void Process_Config( wxCommandEvent& event );
void InstallConfigFrame( const wxPoint& pos );
void InstallPcbOptionsFrame( const wxPoint& pos, int id );
void InstallPcbGlobalDeleteFrame( const wxPoint& pos );
/* handlers for block commands */
int ReturnBlockCommand( int key );
virtual void HandleBlockPlace( wxDC* DC );
virtual int HandleBlockEnd( wxDC* DC );
void InstallDrillFrame( wxCommandEvent& event );
void ToPostProcess( wxCommandEvent& event );
void Genere_HPGL( const wxString& FullFileName, int Layers );
void Genere_GERBER( const wxString& FullFileName, int Layers );
void Genere_PS( const wxString& FullFileName, int Layers );
void Plot_Layer_HPGL( FILE* File, int masque_layer,
int garde, int tracevia, int modetrace );
void Plot_Layer_GERBER( FILE* File, int masque_layer,
int garde, int tracevia );
int Gen_D_CODE_File( const wxString& Name_File );
void Plot_Layer_PS( FILE* File, int masque_layer,
int garde, int tracevia, int modetrace );
void Files_io( wxCommandEvent& event );
int LoadOneGerberFile( const wxString& FileName, wxDC* DC, int mode );
int ReadGerberFile( wxDC* DC, FILE* File, bool Append );
bool Read_GERBER_File( wxDC* DC,
const wxString& GERBER_FullFileName,
const wxString& D_Code_FullFileName );
bool SaveGerberFile( const wxString& FileName, wxDC* DC );
int Read_D_Code_File( const wxString& D_Code_FullFileName );
void CopyDCodesSizeToItems();
void Liste_D_Codes( wxDC* DC );
/* Fonctions specifiques */
void Trace_Gerber( wxDC* DC, int draw_mode, int printmasklayer );
// Copper texts
void Rotate_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
TEXTE_PCB* Create_Texte_Pcb( wxDC* DC );
void Delete_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
void StartMoveTextePcb( TEXTE_PCB* TextePcb, wxDC* DC );
void Place_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC );
// PCB handling
bool Clear_Pcb( bool query );
void Erase_Current_Layer( bool query );
void Erase_Zones( bool query );
void Erase_Segments_Pcb( bool is_edges, bool query );
void Erase_Pistes( int masque_type, bool query );
void Erase_Textes_Pcb( bool query );
void UnDeleteItem( wxDC* DC );
void Delete_DCode_Items( wxDC* DC, int dcode_value, int layer_number );
TRACK* Begin_Route( TRACK* track, wxDC* DC );
void End_Route( TRACK* track, wxDC* DC );
TRACK* Delete_Segment( wxDC* DC, TRACK* Track );
int Edit_TrackSegm_Width( wxDC* DC, TRACK* segm );
// Conversion function
void ExportDataInPcbnewFormat( wxCommandEvent& event );
DECLARE_EVENT_TABLE()
};
/*********************************************************/
/* class WinEDA_ModuleEditFrame: public WinEDA_DrawFrame */
/* Class for the footprint editor */
/*********************************************************/
class WinEDA_ModuleEditFrame : public WinEDA_BasePcbFrame
{
public:
MODULE* CurrentModule;
wxString m_CurrentLib;
public:
WinEDA_ModuleEditFrame( wxWindow* father, WinEDA_App* parent,
const wxString& title,
const wxPoint& pos, const wxSize& size,
long style = KICAD_DEFAULT_DRAWFRAME_STYLE );
~WinEDA_ModuleEditFrame();
void InstallOptionsFrame( const wxPoint& pos );
void OnCloseWindow( wxCloseEvent& Event );
void Process_Special_Functions( wxCommandEvent& event );
void RedrawActiveWindow( wxDC* DC, bool EraseBg );
void ReCreateHToolbar();
void ReCreateVToolbar();
void ReCreateOptToolbar();
void ReCreateAuxiliaryToolbar();
void OnLeftClick( wxDC* DC, const wxPoint& MousePos );
void OnLeftDClick( wxDC* DC, const wxPoint& MousePos );
bool OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu );
void SetToolbars();
void ReCreateMenuBar();
void ToolOnRightClick( wxCommandEvent& event );
void OnSelectOptionToolbar( wxCommandEvent& event );
void OnHotKey( wxDC* DC, int hotkey, EDA_BaseStruct* DrawStruct );
/* handlers for block commands */
int ReturnBlockCommand( int key );
virtual void HandleBlockPlace( wxDC* DC );
virtual int HandleBlockEnd( wxDC* DC );
BOARD_ITEM* ModeditLocateAndDisplay( int aHotKeyCode = 0 );
/* Undo and redo functions */
public:
void SaveCopyInUndoList( EDA_BaseStruct* ItemToCopy, int flag_type_command = 0 );
private:
void GetComponentFromUndoList();
void GetComponentFromRedoList();
public:
// Footprint edition
void Place_Ancre( MODULE* module, wxDC* DC );
void RemoveStruct( EDA_BaseStruct* Item, wxDC* DC );
void Transform( MODULE* module, wxDC* DC, int transform );
// loading Footprint
MODULE* Import_Module( wxDC* DC );
void Export_Module( MODULE* ptmod, bool createlib );
void Load_Module_Module_From_BOARD( MODULE* Module );
// functions to edit footprint edges
void Edit_Edge_Width( EDGE_MODULE* Edge, wxDC* DC );
void Edit_Edge_Layer( EDGE_MODULE* Edge, wxDC* DC );
void Delete_Edge_Module( EDGE_MODULE* Edge, wxDC* DC );
EDGE_MODULE* Begin_Edge_Module( EDGE_MODULE* Edge, wxDC* DC, int type_edge );
void End_Edge_Module( EDGE_MODULE* Edge, wxDC* DC );
void Enter_Edge_Width( EDGE_MODULE* Edge, wxDC* DC );
void Start_Move_EdgeMod( EDGE_MODULE* drawitem, wxDC* DC );
void Place_EdgeMod( EDGE_MODULE* drawitem, wxDC* DC );
// handlers for libraries:
void Delete_Module_In_Library( const wxString& libname );
int Create_Librairie( const wxString& LibName );
void Select_Active_Library();
DECLARE_EVENT_TABLE()
};
#endif /* WXPCB_STRUCT_H */
Reference in New Issue View Git Blame Copy Permalink