kicad/qa/drc_proto/drc_drilled_hole_tester.cpp

284 lines
9.1 KiB
C++

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2020 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <drc/drc_drilled_hole_tester.h>
#include <class_module.h>
#include <drc/drc.h>
#include <widgets/ui_common.h>
DRC_DRILLED_HOLE_TESTER::DRC_DRILLED_HOLE_TESTER( MARKER_HANDLER aMarkerHandler ) :
DRC_TEST_PROVIDER( std::move( aMarkerHandler ) ),
m_units( EDA_UNITS::MILLIMETRES ),
m_board( nullptr ),
m_largestRadius( 0 )
{
}
bool DRC_DRILLED_HOLE_TESTER::RunDRC( EDA_UNITS aUnits, BOARD& aBoard )
{
bool success = true;
// Test drilled holes to minimize drill bit breakage.
//
// Check pad & std. via circular holes for hole-to-hole-min (non-circular holes are milled)
// Check pad & std. via holes for via-min-drill (minimum hole classification)
// Check uvia holes for uvia-min-drill (laser drill classification)
m_units = aUnits;
m_board = &aBoard;
m_holes.clear();
m_largestRadius = 0;
for( MODULE* mod : aBoard.Modules() )
{
for( D_PAD* pad : mod->Pads( ) )
success &= checkPad( pad );
}
for( TRACK* track : aBoard.Tracks() )
{
VIA* via = dynamic_cast<VIA*>( track );
if( via )
{
if( via->GetViaType() == VIATYPE::MICROVIA )
success &= checkMicroVia( via );
else
success &= checkVia( via );
}
}
success &= checkHoles();
return success;
}
bool DRC_DRILLED_HOLE_TESTER::checkPad( D_PAD* aPad )
{
bool success = true;
BOARD_DESIGN_SETTINGS& bds = m_board->GetDesignSettings();
int holeSize = std::min( aPad->GetDrillSize().x, aPad->GetDrillSize().y );
if( holeSize == 0 )
return true;
if( !bds.Ignore( DRCE_TOO_SMALL_PAD_DRILL ) )
{
int minHole = bds.m_MinThroughDrill;
wxString minHoleSource = _( "board minimum" );
DRC_RULE* rule = GetRule( aPad, nullptr, HOLE_CONSTRAINT );
if( rule )
{
minHole = rule->m_MinHole;
minHoleSource = wxString::Format( _( "'%s' rule" ), rule->m_Name );
}
if( holeSize < minHole )
{
DRC_ITEM* drcItem = new DRC_ITEM( DRCE_TOO_SMALL_PAD_DRILL );
m_msg.Printf( drcItem->GetErrorText() + _( " (%s %s; actual %s)" ),
minHoleSource,
MessageTextFromValue( m_units, minHole, true ),
MessageTextFromValue( m_units, holeSize, true ) );
drcItem->SetErrorMessage( m_msg );
drcItem->SetItems( aPad );
HandleMarker( new MARKER_PCB( drcItem, aPad->GetPosition() ) );
success = false;
}
}
if( !bds.Ignore( DRCE_DRILLED_HOLES_TOO_CLOSE ) && bds.m_HoleToHoleMin != 0 )
{
if( aPad->GetDrillShape() == PAD_DRILL_SHAPE_CIRCLE )
addHole( aPad->GetPosition(), aPad->GetDrillSize().x / 2, aPad );
}
return success;
}
bool DRC_DRILLED_HOLE_TESTER::checkVia( VIA* via )
{
bool success = true;
BOARD_DESIGN_SETTINGS& bds = m_board->GetDesignSettings();
if( !bds.Ignore( DRCE_TOO_SMALL_VIA_DRILL ) )
{
int minHole = bds.m_MinThroughDrill;
wxString minHoleSource = _( "board minimum" );
DRC_RULE* rule = GetRule( via, nullptr, HOLE_CONSTRAINT );
if( rule )
{
minHole = rule->m_MinHole;
minHoleSource = wxString::Format( _( "'%s' rule" ), rule->m_Name );
}
if( via->GetDrillValue() < minHole )
{
DRC_ITEM* drcItem = new DRC_ITEM( DRCE_TOO_SMALL_VIA_DRILL );
m_msg.Printf( drcItem->GetErrorText() + _( " (%s %s; actual %s)" ),
minHoleSource,
MessageTextFromValue( m_units, minHole, true ),
MessageTextFromValue( m_units, via->GetDrillValue(), true ) );
drcItem->SetErrorMessage( m_msg );
drcItem->SetItems( via );
HandleMarker( new MARKER_PCB( drcItem, via->GetPosition() ) );
success = false;
}
}
if( !bds.Ignore( DRCE_DRILLED_HOLES_TOO_CLOSE ) && bds.m_HoleToHoleMin != 0 )
{
addHole( via->GetPosition(), via->GetDrillValue() / 2, via );
}
return success;
}
bool DRC_DRILLED_HOLE_TESTER::checkMicroVia( VIA* via )
{
bool success = true;
BOARD_DESIGN_SETTINGS& bds = m_board->GetDesignSettings();
if( !bds.Ignore( DRCE_TOO_SMALL_MICROVIA_DRILL ) )
{
int minHole = bds.m_MicroViasMinDrill;
wxString minHoleSource = _( "board minimum" );
DRC_RULE* rule = GetRule( via, nullptr, HOLE_CONSTRAINT );
if( rule )
{
minHole = rule->m_MinHole;
minHoleSource = wxString::Format( _( "'%s' rule" ), rule->m_Name );
}
if( via->GetDrillValue() < minHole )
{
DRC_ITEM* drcItem = new DRC_ITEM( DRCE_TOO_SMALL_MICROVIA_DRILL );
m_msg.Printf( drcItem->GetErrorText() + _( " (%s %s; actual %s)" ),
minHoleSource,
MessageTextFromValue( m_units, minHole, true ),
MessageTextFromValue( m_units, via->GetDrillValue(), true ) );
drcItem->SetErrorMessage( m_msg );
drcItem->SetItems( via );
HandleMarker( new MARKER_PCB( drcItem, via->GetPosition() ) );
success = false;
}
}
return success;
}
void DRC_DRILLED_HOLE_TESTER::addHole( const wxPoint& aLocation, int aRadius, BOARD_ITEM* aOwner )
{
DRILLED_HOLE hole;
hole.m_location = aLocation;
hole.m_drillRadius = aRadius;
hole.m_owner = aOwner;
m_largestRadius = std::max( m_largestRadius, aRadius );
m_holes.push_back( hole );
}
bool DRC_DRILLED_HOLE_TESTER::checkHoles()
{
bool success = true;
BOARD_DESIGN_SETTINGS& bds = m_board->GetDesignSettings();
// No need to check if we're ignoring DRCE_DRILLED_HOLES_TOO_CLOSE; if we are then we
// won't have collected any holes to test.
// Sort holes by X for performance. In the nested iteration we then need to look at
// following holes only while they are within the refHole's neighborhood as defined by
// the refHole radius + the minimum hole-to-hole clearance + the largest radius any of
// the following holes can have.
std::sort( m_holes.begin(), m_holes.end(),
[]( const DRILLED_HOLE& a, const DRILLED_HOLE& b )
{
if( a.m_location.x == b.m_location.x )
return a.m_location.y < b.m_location.y;
else
return a.m_location.x < b.m_location.x;
} );
for( size_t ii = 0; ii < m_holes.size(); ++ii )
{
const DRILLED_HOLE& refHole = m_holes[ ii ];
int neighborhood = refHole.m_drillRadius + bds.m_HoleToHoleMin + m_largestRadius;
for( size_t jj = ii + 1; jj < m_holes.size(); ++jj )
{
const DRILLED_HOLE& checkHole = m_holes[ jj ];
if( refHole.m_location.x + neighborhood < checkHole.m_location.x )
break;
// Holes with identical locations are allowable
if( checkHole.m_location == refHole.m_location )
continue;
int actual = KiROUND( GetLineLength( checkHole.m_location, refHole.m_location ) );
actual = std::max( 0, actual - checkHole.m_drillRadius - refHole.m_drillRadius );
if( actual < bds.m_HoleToHoleMin )
{
DRC_ITEM* drcItem = new DRC_ITEM( DRCE_DRILLED_HOLES_TOO_CLOSE );
m_msg.Printf( drcItem->GetErrorText() + _( " (board minimum %s; actual %s)" ),
MessageTextFromValue( m_units, bds.m_HoleToHoleMin, true ),
MessageTextFromValue( m_units, actual, true ) );
drcItem->SetErrorMessage( m_msg );
drcItem->SetItems( refHole.m_owner, checkHole.m_owner );
HandleMarker( new MARKER_PCB( drcItem, refHole.m_location ) );
success = false;
}
}
}
return success;
}