haskal
/
kicad
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
kicad/pcbnew/ioascii.cpp

1194 lines
35 KiB
C++
Raw Blame History

/**
* @file ioascii.cpp
* @brief Routines for reading and saving of structures in ASCII file common to Pcbnew and CvPcb.
*/
#include "fctsys.h"
#include "confirm.h"
#include "kicad_string.h"
#include "build_version.h"
#include "wxPcbStruct.h"
#include "richio.h"
#include "macros.h"
#include "pcbcommon.h"
/**
* @todo Fix having to recompile the same file with a different defintion. This is
* what C++ derivation was designed to solve.
*/
#ifdef PCBNEW
#include "zones.h"
#endif
#ifdef CVPCB
#include "cvpcb.h"
#endif
#include "class_board.h"
#include "class_module.h"
#include "class_track.h"
#include "class_pcb_text.h"
#include "class_zone.h"
#include "class_dimension.h"
#include "class_drawsegment.h"
#include "class_mire.h"
#include "pcbnew.h"
#include "pcbnew_id.h"
#include "autorout.h"
#include "pcb_plot_params.h"
/* ASCII format of structures:
*
* Structure PAD:
*
* $PAD
* Sh "name" form DIMVA dimH dV dH East: general form dV, dH = delta size
* Dr. diam dV dH: drill: diameter drilling offsets
* At Type S / N layers: standard, cms, conn, hole, meca.,
* Stack / Normal, 32-bit hexadecimal: occupation layers
* Nm net_code netname
* Po posrefX posrefy: reFX position, Y (0 = east position / anchor)
* $EndPAD
*
* Module Structure
*
* $MODULE namelib
* Po ax ay east layer masquelayer m_TimeCode
* ax ay ord = anchor (position module)
* east = east to 0.1 degree
* layer = layer number
* masquelayer = silkscreen layer for
* m_TimeCode internal use (groups)
* Li <namelib>
*
* Cd <text> description of the component (Component Doc)
* Kw <text> List of key words
*
* Sc schematic timestamp, reference schematic
*
* Op rot90 rot180 placement Options Auto (court rot 90, 180)
* rot90 is about 2x4-bit:
* lsb = cost rot 90, rot court msb = -90;
*
* Tn px py DIMVA dimh East thickness mirror visible "text"
* n = type (0 = ref, val = 1,> 1 = qcq
* Texts POS x, y / anchor and orient module 0
* DIMVA dimh East
* mirror thickness (Normal / Mirror)
* Visible V / I
* DS ox oy fx fy w
* Edge: coord segment ox, oy has fx, fy, on
* was the anchor and orient 0
* thickness w
* DC ox oy fx fy w descr circle (center, 1 point, thickness)
* $PAD
* $EndPAD section pads if available
* $Endmodule
*/
int NbDraw, NbTrack, NbZone, NbMod, NbNets;
/** Read a list of segments (Tracks, zones)
* @return items count or - count if no end block ($End...) found.
*/
int PCB_BASE_FRAME::ReadListeSegmentDescr( LINE_READER* aReader,
TRACK* insertBeforeMe,
int StructType,
int NumSegm )
{
int shape, width, drill, layer, type, flags, net_code;
int tempStartX, tempStartY;
int tempEndX, tempEndY;
int ii = 0;
char* line;
TRACK* newTrack;
while( aReader->ReadLine() )
{
line = aReader->Line();
int makeType;
unsigned long timeStamp;
if( line[0] == '$' )
{
return ii; /* end of segmentlist: OK */
}
int arg_count = sscanf( line + 2, " %d %d %d %d %d %d %d", &shape,
&tempStartX, &tempStartY,
&tempEndX, &tempEndY, &width,
&drill );
// Read the 2nd line to determine the exact type, one of:
// PCB_TRACE_T, PCB_VIA_T, or PCB_ZONE_T. The type field in 2nd line
// differentiates between PCB_TRACE_T and PCB_VIA_T. With virtual
// functions in use, it is critical to instantiate the PCB_VIA_T
// exactly.
if( !aReader->ReadLine() )
break;
line = aReader->Line();
if( line[0] == '$' )
break;
// parse the 2nd line first to determine the type of object
sscanf( line + 2, " %d %d %d %lX %X", &layer, &type, &net_code,
&timeStamp, &flags );
if( StructType==PCB_TRACE_T && type==1 )
makeType = PCB_VIA_T;
else
makeType = StructType;
switch( makeType )
{
default:
case PCB_TRACE_T:
newTrack = new TRACK( GetBoard() );
GetBoard()->m_Track.Insert( newTrack, insertBeforeMe );
break;
case PCB_VIA_T:
newTrack = new SEGVIA( GetBoard() );
GetBoard()->m_Track.Insert( newTrack, insertBeforeMe );
break;
case PCB_ZONE_T: // this is now deprecated, but exits in old boards
newTrack = new SEGZONE( GetBoard() );
GetBoard()->m_Zone.Insert( (SEGZONE*) newTrack, (SEGZONE*) insertBeforeMe );
break;
}
newTrack->m_TimeStamp = timeStamp;
newTrack->m_Start.x = tempStartX;
newTrack->m_Start.y = tempStartY;
newTrack->m_End.x = tempEndX;
newTrack->m_End.y = tempEndY;
newTrack->m_Width = width;
newTrack->m_Shape = shape;
if( arg_count < 7 || drill <= 0 )
newTrack->SetDrillDefault();
else
newTrack->SetDrillValue( drill );
newTrack->SetLayer( layer );
if( makeType == PCB_VIA_T ) // Ensure layers are OK when possible:
{
if( newTrack->Shape() == VIA_THROUGH )
( (SEGVIA*) newTrack )->SetLayerPair( LAYER_N_FRONT, LAYER_N_BACK );
}
newTrack->SetNet( net_code );
newTrack->SetState( flags, ON );
}
DisplayError( this, _( "Error: Unexpected end of file !" ) );
return -ii;
}
int PCB_BASE_FRAME::ReadGeneralDescrPcb( LINE_READER* aReader )
{
char* Line, * data;
while( aReader->ReadLine() )
{
Line = aReader->Line();
data = strtok( Line, " =\n\r" );
if( strnicmp( data, "$EndGENERAL", 10 ) == 0 )
break;
if( stricmp( data, "EnabledLayers" ) == 0 )
{
int EnabledLayers = 0;
data = strtok( NULL, " =\n\r" );
sscanf( data, "%X", &EnabledLayers );
// Setup layer visibility
GetBoard()->SetEnabledLayers( EnabledLayers );
continue;
}
if( strncmp( data, "Ly", 2 ) == 0 ) // Old format for Layer count
{
int Masque_Layer = 1, ii;
data = strtok( NULL, " =\n\r" );
sscanf( data, "%X", &Masque_Layer );
// Setup layer count
int layer_count = 0;
for( ii = 0; ii < NB_COPPER_LAYERS; ii++ )
{
if( Masque_Layer & 1 )
layer_count++;
Masque_Layer >>= 1;
}
GetBoard()->SetCopperLayerCount( layer_count );
continue;
}
if( stricmp( data, "BoardThickness" ) == 0 )
{
data = strtok( NULL, " =\n\r" );
GetBoard()->GetBoardDesignSettings()->m_BoardThickness = atoi( data );
continue;
}
if( strnicmp( data, "Links", 5 ) == 0 )
{
// Info only, do nothing
continue;
}
if( strnicmp( data, "NoConn", 6 ) == 0 )
{
data = strtok( NULL, " =\n\r" );
GetBoard()->m_NbNoconnect = atoi( data );
continue;
}
if( strnicmp( data, "Di", 2 ) == 0 )
{
wxSize pcbsize, screensize;
data = strtok( NULL, " =\n\r" );
GetBoard()->m_BoundaryBox.SetX( atoi( data ) );
data = strtok( NULL, " =\n\r" );
GetBoard()->m_BoundaryBox.SetY( atoi( data ) );
data = strtok( NULL, " =\n\r" );
GetBoard()->m_BoundaryBox.SetWidth( atoi( data ) - GetBoard()->m_BoundaryBox.GetX() );
data = strtok( NULL, " =\n\r" );
GetBoard()->m_BoundaryBox.SetHeight( atoi( data ) - GetBoard()->m_BoundaryBox.GetY() );
continue;
}
/* Reading the number of segments of type DRAW, TRACK, ZONE */
if( stricmp( data, "Ndraw" ) == 0 )
{
data = strtok( NULL, " =\n\r" );
NbDraw = atoi( data );
continue;
}
if( stricmp( data, "Ntrack" ) == 0 )
{
data = strtok( NULL, " =\n\r" );
NbTrack = atoi( data );
continue;
}
if( stricmp( data, "Nzone" ) == 0 )
{
data = strtok( NULL, " =\n\r" );
NbZone = atoi( data );
continue;
}
if( stricmp( data, "Nmodule" ) == 0 )
{
data = strtok( NULL, " =\n\r" );
NbMod = atoi( data );
continue;
}
if( stricmp( data, "Nnets" ) == 0 )
{
data = strtok( NULL, " =\n\r" );
NbNets = atoi( data );
continue;
}
}
return 1;
}
int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
{
char* Line;
char* data;
NETCLASS* netclass_default = GetBoard()->m_NetClasses.GetDefault();
while( aReader->ReadLine() )
{
Line = aReader->Line();
if( strnicmp( Line, "PcbPlotParams", 13 ) == 0 )
{
PCB_PLOT_PARAMS_PARSER parser( &Line[13], aReader->GetSource() );
try
{
g_PcbPlotOptions.Parse( &parser );
}
catch( IO_ERROR& e )
{
wxString msg;
msg.Printf( _( "Error reading PcbPlotParams from %s:\n%s" ),
aReader->GetSource().GetData(),
e.errorText.GetData() );
wxMessageBox( msg, _( "Open Board File" ), wxICON_ERROR );
}
continue;
}
strtok( Line, " =\n\r" );
data = strtok( NULL, " =\n\r" );
if( stricmp( Line, "$EndSETUP" ) == 0 )
{
// Until such time as the *.brd file does not have the
// global parameters:
// "TrackWidth", "TrackMinWidth", "ViaSize", "ViaDrill",
// "ViaMinSize", and "TrackClearence", put those same global
// values into the default NETCLASS until later board load
// code should override them. *.brd files which have been
// saved with knowledge of NETCLASSes will override these
// defaults, old boards will not.
//
// @todo: I expect that at some point we can remove said global
// parameters from the *.brd file since the ones in the
// default netclass serve the same purpose. If needed
// at all, the global defaults should go into a preferences
// file instead so they are there to start new board
// projects.
GetBoard()->m_NetClasses.GetDefault()->SetParams();
return 0;
}
if( stricmp( Line, "AuxiliaryAxisOrg" ) == 0 )
{
int gx = 0, gy = 0;
gx = atoi( data );
data = strtok( NULL, " =\n\r" );
if( data )
gy = atoi( data );
m_Auxiliary_Axis_Position.x = gx;
m_Auxiliary_Axis_Position.y = gy;
continue;
}
#ifdef PCBNEW
if( stricmp( Line, "Layers" ) == 0 )
{
int tmp;
sscanf( data, "%d", &tmp );
GetBoard()->SetCopperLayerCount( tmp );
continue;
}
const int LAYERKEYZ = sizeof("Layer[") - 1;
if( strncmp( Line, "Layer[", LAYERKEYZ ) == 0 )
{
// parse:
// Layer[n] <a_Layer_name_with_no_spaces> <LAYER_T>
char* cp = Line + LAYERKEYZ;
int layer = atoi( cp );
if( data )
{
wxString layerName = FROM_UTF8( data );
GetBoard()->SetLayerName( layer, layerName );
data = strtok( NULL, " \n\r" );
if( data )
{
LAYER_T type = LAYER::ParseType( data );
GetBoard()->SetLayerType( layer, type );
}
}
continue;
}
if( stricmp( Line, "TrackWidth" ) == 0 ) // no more used
{
continue;
}
if( stricmp( Line, "TrackWidthList" ) == 0 )
{
int tmp = atoi( data );
GetBoard()->m_TrackWidthList.push_back( tmp );
continue;
}
if( stricmp( Line, "TrackClearence" ) == 0 )
{
netclass_default->SetClearance( atoi( data ) );
continue;
}
if( stricmp( Line, "TrackMinWidth" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_TrackMinWidth = atoi( data );
continue;
}
if( stricmp( Line, "ZoneClearence" ) == 0 )
{
g_Zone_Default_Setting.m_ZoneClearance = atoi( data );
continue;
}
if( stricmp( Line, "DrawSegmWidth" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_DrawSegmentWidth = atoi( data );
continue;
}
if( stricmp( Line, "EdgeSegmWidth" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_EdgeSegmentWidth = atoi( data );
continue;
}
if( stricmp( Line, "ViaSize" ) == 0 ) // no more used
{
continue;
}
if( stricmp( Line, "ViaMinSize" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_ViasMinSize = atoi( data );
continue;
}
if( stricmp( Line, "MicroViaSize" ) == 0 ) // Not used
{
continue;
}
if( stricmp( Line, "MicroViaMinSize" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_MicroViasMinSize = atoi( data );
continue;
}
if( stricmp( Line, "ViaSizeList" ) == 0 )
{
int tmp = atoi( data );
VIA_DIMENSION via_dim;
via_dim.m_Diameter = tmp;
data = strtok( NULL, " \n\r" );
if( data )
{
tmp = atoi( data );
via_dim.m_Drill = tmp > 0 ? tmp : 0;
}
GetBoard()->m_ViasDimensionsList.push_back( via_dim );
continue;
}
if( stricmp( Line, "ViaDrill" ) == 0 )
{
int diameter = atoi( data );
netclass_default->SetViaDrill( diameter );
continue;
}
if( stricmp( Line, "ViaMinDrill" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_ViasMinDrill = atoi( data );
continue;
}
if( stricmp( Line, "MicroViaDrill" ) == 0 )
{
int diameter = atoi( data );
netclass_default->SetuViaDrill( diameter );
continue;
}
if( stricmp( Line, "MicroViaMinDrill" ) == 0 )
{
int diameter = atoi( data );
GetBoard()->GetBoardDesignSettings()->m_MicroViasMinDrill = diameter;
continue;
}
if( stricmp( Line, "MicroViasAllowed" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_MicroViasAllowed = atoi( data );
continue;
}
if( stricmp( Line, "TextPcbWidth" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_PcbTextWidth = atoi( data );
continue;
}
if( stricmp( Line, "TextPcbSize" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_PcbTextSize.x = atoi( data );
data = strtok( NULL, " =\n\r" );
GetBoard()->GetBoardDesignSettings()->m_PcbTextSize.y = atoi( data );
continue;
}
if( stricmp( Line, "EdgeModWidth" ) == 0 )
{
g_ModuleSegmentWidth = atoi( data );
continue;
}
if( stricmp( Line, "TextModWidth" ) == 0 )
{
g_ModuleTextWidth = atoi( data );
continue;
}
if( stricmp( Line, "TextModSize" ) == 0 )
{
g_ModuleTextSize.x = atoi( data );
data = strtok( NULL, " =\n\r" );
g_ModuleTextSize.y = atoi( data );
continue;
}
if( stricmp( Line, "PadSize" ) == 0 )
{
g_Pad_Master.m_Size.x = atoi( data );
data = strtok( NULL, " =\n\r" );
g_Pad_Master.m_Size.y = atoi( data );
continue;
}
if( stricmp( Line, "PadDrill" ) == 0 )
{
g_Pad_Master.m_Drill.x = atoi( data );
g_Pad_Master.m_Drill.y = g_Pad_Master.m_Drill.x;
continue;
}
if( stricmp( Line, "Pad2MaskClearance" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_SolderMaskMargin = atoi( data );
continue;
}
if( stricmp( Line, "Pad2PasteClearance" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_SolderPasteMargin = atoi( data );
continue;
}
if( stricmp( Line, "Pad2PasteClearanceRatio" ) == 0 )
{
GetBoard()->GetBoardDesignSettings()->m_SolderPasteMarginRatio = atof( data );
continue;
}
if( stricmp( Line, "GridOrigin" ) == 0 )
{
int Ox = 0;
int Oy = 0;
Ox = atoi( data );
data = strtok( NULL, " =\n\r" );
if ( data )
Oy = atoi( data );
GetScreen()->m_GridOrigin.x = Ox;
GetScreen()->m_GridOrigin.y = Oy;
continue;
}
#endif
}
/* Ensure tracks and vias sizes lists are ok:
* Sort lists by by increasing value and remove duplicates
* (the first value is not tested, because it is the netclass value
*/
sort( GetBoard()->m_ViasDimensionsList.begin() + 1, GetBoard()->m_ViasDimensionsList.end() );
sort( GetBoard()->m_TrackWidthList.begin() + 1, GetBoard()->m_TrackWidthList.end() );
for( unsigned ii = 1; ii < GetBoard()->m_ViasDimensionsList.size() - 1; ii++ )
{
if( GetBoard()->m_ViasDimensionsList[ii] == GetBoard()->m_ViasDimensionsList[ii + 1] )
{
GetBoard()->m_ViasDimensionsList.erase( GetBoard()->m_ViasDimensionsList.begin() + ii );
ii--;
}
}
for( unsigned ii = 1; ii < GetBoard()->m_TrackWidthList.size() - 1; ii++ )
{
if( GetBoard()->m_TrackWidthList[ii] == GetBoard()->m_TrackWidthList[ii + 1] )
{
GetBoard()->m_TrackWidthList.erase( GetBoard()->m_TrackWidthList.begin() + ii );
ii--;
}
}
return 1;
}
#ifdef PCBNEW
static int WriteSetup( FILE* aFile, PCB_EDIT_FRAME* aFrame, BOARD* aBoard )
{
NETCLASS* netclass_default = aBoard->m_NetClasses.GetDefault();
char text[1024];
fprintf( aFile, "$SETUP\n" );
sprintf( text, "InternalUnit %f INCH\n", 1.0 / PCB_INTERNAL_UNIT );
fprintf( aFile, "%s", text );
fprintf( aFile, "Layers %d\n", aBoard->GetCopperLayerCount() );
unsigned layerMask = g_TabAllCopperLayerMask[aBoard->GetCopperLayerCount() - 1];
for( int layer = 0; layerMask; ++layer, layerMask >>= 1 )
{
if( layerMask & 1 )
{
fprintf( aFile, "Layer[%d] %s %s\n", layer,
TO_UTF8( aBoard->GetLayerName( layer ) ),
LAYER::ShowType( aBoard->GetLayerType( layer ) ) );
}
}
// Save current default track width, for compatibility with older Pcbnew version;
fprintf( aFile, "TrackWidth %d\n", aBoard->GetCurrentTrackWidth() );
// Save custom tracks width list (the first is not saved here: this is the netclass value
for( unsigned ii = 1; ii < aBoard->m_TrackWidthList.size(); ii++ )
fprintf( aFile, "TrackWidthList %d\n", aBoard->m_TrackWidthList[ii] );
fprintf( aFile, "TrackClearence %d\n", netclass_default->GetClearance() );
fprintf( aFile, "ZoneClearence %d\n", g_Zone_Default_Setting.m_ZoneClearance );
fprintf( aFile, "TrackMinWidth %d\n", aBoard->GetBoardDesignSettings()->m_TrackMinWidth );
fprintf( aFile, "DrawSegmWidth %d\n", aBoard->GetBoardDesignSettings()->m_DrawSegmentWidth );
fprintf( aFile, "EdgeSegmWidth %d\n", aBoard->GetBoardDesignSettings()->m_EdgeSegmentWidth );
// Save current default via size, for compatibility with older Pcbnew version;
fprintf( aFile, "ViaSize %d\n", netclass_default->GetViaDiameter() );
fprintf( aFile, "ViaDrill %d\n", netclass_default->GetViaDrill() );
fprintf( aFile, "ViaMinSize %d\n", aBoard->GetBoardDesignSettings()->m_ViasMinSize );
fprintf( aFile, "ViaMinDrill %d\n", aBoard->GetBoardDesignSettings()->m_ViasMinDrill );
// Save custom vias diameters list (the first is not saved here: this is
// the netclass value
for( unsigned ii = 1; ii < aBoard->m_ViasDimensionsList.size(); ii++ )
fprintf( aFile, "ViaSizeList %d %d\n",
aBoard->m_ViasDimensionsList[ii].m_Diameter,
aBoard->m_ViasDimensionsList[ii].m_Drill );
// for old versions compatibility:
fprintf( aFile, "MicroViaSize %d\n", netclass_default->GetuViaDiameter() );
fprintf( aFile, "MicroViaDrill %d\n", netclass_default->GetuViaDrill() );
fprintf( aFile,
"MicroViasAllowed %d\n",
aBoard->GetBoardDesignSettings()->m_MicroViasAllowed );
fprintf( aFile,
"MicroViaMinSize %d\n",
aBoard->GetBoardDesignSettings()->m_MicroViasMinSize );
fprintf( aFile,
"MicroViaMinDrill %d\n",
aBoard->GetBoardDesignSettings()->m_MicroViasMinDrill );
fprintf( aFile, "TextPcbWidth %d\n", aBoard->GetBoardDesignSettings()->m_PcbTextWidth );
fprintf( aFile,
"TextPcbSize %d %d\n",
aBoard->GetBoardDesignSettings()->m_PcbTextSize.x,
aBoard->GetBoardDesignSettings()->m_PcbTextSize.y );
fprintf( aFile, "EdgeModWidth %d\n", g_ModuleSegmentWidth );
fprintf( aFile, "TextModSize %d %d\n", g_ModuleTextSize.x, g_ModuleTextSize.y );
fprintf( aFile, "TextModWidth %d\n", g_ModuleTextWidth );
fprintf( aFile, "PadSize %d %d\n", g_Pad_Master.m_Size.x, g_Pad_Master.m_Size.y );
fprintf( aFile, "PadDrill %d\n", g_Pad_Master.m_Drill.x );
fprintf( aFile,
"Pad2MaskClearance %d\n",
aBoard->GetBoardDesignSettings()->m_SolderMaskMargin );
if( aBoard->GetBoardDesignSettings()->m_SolderPasteMargin != 0 )
fprintf( aFile,
"Pad2PasteClearance %d\n",
aBoard->GetBoardDesignSettings()->m_SolderPasteMargin );
if( aBoard->GetBoardDesignSettings()->m_SolderPasteMarginRatio != 0 )
fprintf( aFile,
"Pad2PasteClearanceRatio %g\n",
aBoard->GetBoardDesignSettings()->m_SolderPasteMarginRatio );
if ( aFrame->GetScreen()->m_GridOrigin != wxPoint( 0, 0 ) )
{
fprintf( aFile,
"GridOrigin %d %d\n",
aFrame->GetScreen()->m_GridOrigin.x,
aFrame->GetScreen()->m_GridOrigin.y );
}
fprintf( aFile,
"AuxiliaryAxisOrg %d %d\n",
aFrame->m_Auxiliary_Axis_Position.x,
aFrame->m_Auxiliary_Axis_Position.y );
STRING_FORMATTER sf;
g_PcbPlotOptions.Format( &sf, 0 );
wxString record = FROM_UTF8( sf.GetString().c_str() );
record.Replace( wxT("\n"), wxT(""), true );
record.Replace( wxT(" "), wxT(" "), true);
fprintf( aFile, "PcbPlotParams %s\n", TO_UTF8( record ) );
fprintf( aFile, "$EndSETUP\n\n" );
return 1;
}
#endif
bool PCB_EDIT_FRAME::WriteGeneralDescrPcb( FILE* File )
{
EDA_ITEM* PtStruct = GetBoard()->m_Modules;
int NbModules, NbDrawItem, NbLayers;
/* Write copper layer count */
NbLayers = GetBoard()->GetCopperLayerCount();
fprintf( File, "$GENERAL\n" );
fprintf( File, "encoding utf-8\n");
fprintf( File, "LayerCount %d\n", NbLayers );
// Write old format for Layer count (for compatibility with old versions of
// pcbnew
fprintf( File,
"Ly %8X\n",
g_TabAllCopperLayerMask[NbLayers - 1] | ALL_NO_CU_LAYERS );
fprintf( File, "EnabledLayers %08X\n", GetBoard()->GetEnabledLayers() );
fprintf( File, "Links %d\n", GetBoard()->GetRatsnestsCount() );
fprintf( File, "NoConn %d\n", GetBoard()->m_NbNoconnect );
/* Write Bounding box info */
GetBoard()->ComputeBoundingBox();
fprintf( File, "Di %d %d %d %d\n",
GetBoard()->m_BoundaryBox.GetX(),
GetBoard()->m_BoundaryBox.GetY(),
GetBoard()->m_BoundaryBox.GetRight(),
GetBoard()->m_BoundaryBox.GetBottom() );
/* Write segment count for footprints, drawings, track and zones */
/* Calculate the footprint count */
for( NbModules = 0; PtStruct != NULL; PtStruct = PtStruct->Next() )
NbModules++;
PtStruct = GetBoard()->m_Drawings; NbDrawItem = 0;
for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
NbDrawItem++;
fprintf( File, "Ndraw %d\n", NbDrawItem );
fprintf( File, "Ntrack %d\n", GetBoard()->GetNumSegmTrack() );
fprintf( File, "Nzone %d\n", GetBoard()->GetNumSegmZone() );
fprintf( File, "BoardThickness %d\n", GetBoard()->GetBoardDesignSettings()->m_BoardThickness );
fprintf( File, "Nmodule %d\n", NbModules );
fprintf( File, "Nnets %d\n", GetBoard()->m_NetInfo->GetCount() );
fprintf( File, "$EndGENERAL\n\n" );
return true;
}
/**
* Function WriteSheetDescr
* Save the page information (size, texts, date ..)
* @param screen BASE_SCREEN to save
* @param File = an open FILE to write info
*/
bool WriteSheetDescr( BASE_SCREEN* screen, FILE* File )
{
Ki_PageDescr* sheet = screen->m_CurrentSheetDesc;
fprintf( File, "$SHEETDESCR\n" );
fprintf( File, "Sheet %s %d %d\n",
TO_UTF8( sheet->m_Name ), sheet->m_Size.x, sheet->m_Size.y );
fprintf( File, "Title %s\n", EscapedUTF8( screen->m_Title ).c_str() );
fprintf( File, "Date %s\n", EscapedUTF8( screen->m_Date ).c_str() );
fprintf( File, "Rev %s\n", EscapedUTF8( screen->m_Revision ).c_str() );
fprintf( File, "Comp %s\n", EscapedUTF8( screen->m_Company ).c_str() );
fprintf( File, "Comment1 %s\n", EscapedUTF8( screen->m_Commentaire1 ).c_str() );
fprintf( File, "Comment2 %s\n", EscapedUTF8( screen->m_Commentaire2 ).c_str() );
fprintf( File, "Comment3 %s\n", EscapedUTF8( screen->m_Commentaire3 ).c_str() );
fprintf( File, "Comment4 %s\n", EscapedUTF8( screen->m_Commentaire4 ).c_str() );
fprintf( File, "$EndSHEETDESCR\n\n" );
return true;
}
static bool ReadSheetDescr( BASE_SCREEN* screen, LINE_READER* aReader )
{
char* Line, buf[1024], * text;
while( aReader->ReadLine() )
{
Line = aReader->Line();
if( strnicmp( Line, "$End", 4 ) == 0 )
return true;
if( strnicmp( Line, "Sheet", 4 ) == 0 )
{
text = strtok( Line, " \t\n\r" );
text = strtok( NULL, " \t\n\r" );
Ki_PageDescr* sheet = g_SheetSizeList[0];
int ii;
for( ii = 0; sheet != NULL; ii++, sheet = g_SheetSizeList[ii] )
{
if( stricmp( TO_UTF8( sheet->m_Name ), text ) == 0 )
{
screen->m_CurrentSheetDesc = sheet;
if( sheet == &g_Sheet_user )
{
text = strtok( NULL, " \t\n\r" );
if( text )
sheet->m_Size.x = atoi( text );
text = strtok( NULL, " \t\n\r" );
if( text )
sheet->m_Size.y = atoi( text );
}
break;
}
}
continue;
}
if( strnicmp( Line, "Title", 2 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Title = FROM_UTF8( buf );
continue;
}
if( strnicmp( Line, "Date", 2 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Date = FROM_UTF8( buf );
continue;
}
if( strnicmp( Line, "Rev", 2 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Revision = FROM_UTF8( buf );
continue;
}
if( strnicmp( Line, "Comp", 4 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Company = FROM_UTF8( buf );
continue;
}
if( strnicmp( Line, "Comment1", 8 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Commentaire1 = FROM_UTF8( buf );
continue;
}
if( strnicmp( Line, "Comment2", 8 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Commentaire2 = FROM_UTF8( buf );
continue;
}
if( strnicmp( Line, "Comment3", 8 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Commentaire3 = FROM_UTF8( buf );
continue;
}
if( strnicmp( Line, "Comment4", 8 ) == 0 )
{
ReadDelimitedText( buf, Line, 256 );
screen->m_Commentaire4 = FROM_UTF8( buf );
continue;
}
}
return false;
}
int PCB_EDIT_FRAME::ReadPcbFile( LINE_READER* aReader, bool Append )
{
char* Line;
wxBusyCursor dummy;
// Switch the locale to standard C (needed to read floating point numbers
// like 1.3)
SetLocaleTo_C_standard();
BOARD* board = GetBoard();
NbDraw = NbTrack = NbZone = NbMod = NbNets = -1;
board->m_Status_Pcb = 0;
board->m_NetClasses.Clear();
// Put a dollar sign in front, and test for a specific length of characters
// The -1 is to omit the trailing \0 which is included in sizeof() on a
// string.
#define TESTLINE( x ) (strncmp( Line, "$" x, sizeof("$" x) - 1 ) == 0)
while( aReader->ReadLine() )
{
Line = aReader->Line();
// put the more frequent ones at the top
if( TESTLINE( "MODULE" ) )
{
MODULE* Module = new MODULE( board );
if( Module == NULL )
continue;
board->Add( Module, ADD_APPEND );
Module->ReadDescr( aReader );
continue;
}
if( TESTLINE( "DRAWSEGMENT" ) )
{
DRAWSEGMENT* DrawSegm = new DRAWSEGMENT( board );
board->Add( DrawSegm, ADD_APPEND );
DrawSegm->ReadDrawSegmentDescr( aReader );
continue;
}
if( TESTLINE( "EQUIPOT" ) )
{
NETINFO_ITEM* net = new NETINFO_ITEM( board );
board->m_NetInfo->AppendNet( net );
net->ReadDescr( aReader );
continue;
}
if( TESTLINE( "TEXTPCB" ) )
{
TEXTE_PCB* pcbtxt = new TEXTE_PCB( board );
board->Add( pcbtxt, ADD_APPEND );
pcbtxt->ReadTextePcbDescr( aReader );
continue;
}
if( TESTLINE( "TRACK" ) )
{
#ifdef PCBNEW
TRACK* insertBeforeMe = Append ? NULL : board->m_Track.GetFirst();
ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_TRACE_T, NbTrack );
#endif
continue;
}
if( TESTLINE( BRD_NETCLASS ) )
{
// create an empty NETCLASS without a name.
NETCLASS* netclass = new NETCLASS( board, wxEmptyString );
// fill it from the *.brd file, and establish its name.
netclass->ReadDescr( aReader );
if( !board->m_NetClasses.Add( netclass ) )
{
// Must have been a name conflict, this is a bad board file.
// User may have done a hand edit to the file.
// Delete netclass if board could not take ownership of it.
delete netclass;
// @todo: throw an exception here, this is a bad board file.
}
continue;
}
if( TESTLINE( "CZONE_OUTLINE" ) )
{
ZONE_CONTAINER* zone_descr = new ZONE_CONTAINER( board );
zone_descr->ReadDescr( aReader );
if( zone_descr->GetNumCorners() > 2 ) // should always occur
board->Add( zone_descr );
else
delete zone_descr;
continue;
}
if( TESTLINE( "COTATION" ) )
{
DIMENSION* Dimension = new DIMENSION( board );
board->Add( Dimension, ADD_APPEND );
Dimension->ReadDimensionDescr( aReader );
continue;
}
if( TESTLINE( "PCB_TARGET" ) )
{
PCB_TARGET* Mire = new PCB_TARGET( board );
board->Add( Mire, ADD_APPEND );
Mire->ReadMirePcbDescr( aReader );
continue;
}
if( TESTLINE( "ZONE" ) )
{
#ifdef PCBNEW
SEGZONE* insertBeforeMe = Append ? NULL : board->m_Zone.GetFirst();
ReadListeSegmentDescr( aReader, insertBeforeMe, PCB_ZONE_T, NbZone );
#endif
continue;
}
if( TESTLINE( "GENERAL" ) )
{
ReadGeneralDescrPcb( aReader );
continue;
}
if( TESTLINE( "SHEETDESCR" ) )
{
ReadSheetDescr( GetScreen(), aReader );
continue;
}
if( TESTLINE( "SETUP" ) )
{
if( !Append )
{
ReadSetup( aReader );
}
else
{
while( aReader->ReadLine() )
{
Line = aReader->Line();
if( TESTLINE( "EndSETUP" ) )
break;
}
}
continue;
}
if( TESTLINE( "EndPCB" ) )
break;
}
SetLocaleTo_Default(); // revert to the current locale
GetBoard()->m_Status_Pcb = 0;
// Build the net info list
GetBoard()->m_NetInfo->BuildListOfNets();
board->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
return 1;
}
#ifdef PCBNEW
/* Save the current PCB in ASCII format
* Returns
* 1 if OK
* 0 if error occurs saving file.
*/
int PCB_EDIT_FRAME::SavePcbFormatAscii( FILE* aFile )
{
bool rc;
char line[256];
GetBoard()->m_Status_Pcb &= ~CONNEXION_OK;
wxBeginBusyCursor();
// Switch the locale to standard C (needed to print floating point numbers
// like 1.3)
SetLocaleTo_C_standard();
/* Writing file header. */
fprintf( aFile, "PCBNEW-BOARD Version %d date %s\n\n", g_CurrentVersionPCB,
DateAndTime( line ) );
fprintf( aFile, "# Created by Pcbnew%s\n\n", TO_UTF8( GetBuildVersion() ) );
GetBoard()->SynchronizeNetsAndNetClasses();
// Select default Netclass before writing file.
// Useful to save default values in headers
GetBoard()->SetCurrentNetClass( GetBoard()->m_NetClasses.GetDefault()->GetName() );
WriteGeneralDescrPcb( aFile );
WriteSheetDescr( GetScreen(), aFile );
WriteSetup( aFile, this, GetBoard() );
rc = GetBoard()->Save( aFile );
SetLocaleTo_Default(); // revert to the current locale
wxEndBusyCursor();
if( !rc )
DisplayError( this, wxT( "Unable to save PCB file" ) );
else
SetStatusText( wxEmptyString );
return rc;
}
#endif
Reference in New Issue View Git Blame Copy Permalink