kicad/bitmaps_png/CMakeLists.txt

807 lines
19 KiB
CMake

# This program source code file is part of KICAD, a free EDA CAD application.
#
# Copyright (C) 2011 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
# Copyright (C) 2011-2018 Kicad Developers, see AUTHORS.txt for contributors.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, you may find one here:
# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
# or you may search the http://www.gnu.org website for the version 2 license,
# or you may write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
#
# In this directory, a number of different processes are managed:
#
# 1) PNG files are created from SVG files
# 2) CPP files are created from PNG files.
# 3) Object files are created from CPP files.
# 4) A static library is created from the object files
# Step 3) is universal and is done for any builder, whereas steps 1) and 2) are
# optional and depend on MAINTAIN_PNGS being defined in CMake. The reason we
# can skip 1) and 2) is that the *.CPP files are part of the source tree so
# do not need to rebuilt by a typical builder. However, because the *.CPP files
# are part of the source tree, and subject to version control, they should be built
# only when needed, otherwise this results in a diff for the version control system.
# Therefore steps 1) and 2) are driven by CMake (if MAINTAIN_PNGS) which gives
# us conditional *.CPP building based on an edit to the respective *.SVG file.
# If MAINTAIN_PNGS is not defined, then you are a normal builder and no special
# tools are required. If MAINTAIN_PNG is defined, then you are a PNG maintainer
# and will need the following tools findable in your PATH:
#
# 1) inkscape - command line mode is used, must be on your PATH
# 2) pngcrush - this program must be on your PATH
#
# lower case is used for local variables, uppercase for global variables
option( MAINTAIN_PNGS
"Set to true if you are a PNG maintainer and have the required tools given in the bitmaps_png/CMakeLists.txt file (default OFF)."
OFF)
# Used Only to maintain PNG files (and therefore to recreate .cpp files)
# The png2cpp creates files with native End of Line format.
# Plan for three sizes of bitmaps:
# SMALL - for menus - 16 x 16
# MID - for toolbars - 24 x 24
# BIG - for program icons - 48 x 48
# which are given on three basename lists: BMAPS_SMALL, BMAPS_MID,and BMAPS_BIG
# respectively. The basename is without file extension and without path.
# A corresponding ${basename}.svg file must exist in 'sources' dir below here.
# small icons (16x16) needed in listboxes and dialog buttons
set( BMAPS_SMALL
icon_bitmap2component_16
icon_eeschema_16
icon_gerbview_16
icon_kicad_16
icon_libedit_16
icon_modedit_16
icon_pagelayout_editor_16
icon_pcbcalculator_16
icon_pcbnew_16
pinorient_right
pinorient_left
pinorient_up
pinorient_down
pinshape_normal
pinshape_invert
pinshape_clock_normal
pinshape_clock_invert
pinshape_active_low_input
pinshape_clock_active_low
pinshape_active_low_output
pinshape_clock_fall
pinshape_nonlogic
pintype_input
pintype_output
pintype_bidi
pintype_3states
pintype_passive
pintype_notspecif
pintype_powerinput
pintype_poweroutput
pintype_opencoll
pintype_openemit
pintype_noconnect
small_down
small_edit
small_folder
small_library
small_plus
small_refresh
small_trash
small_up
tree_nosel
tree_sel
triangle_down
triangle_right
visibility
visibility_off
www
)
# image basenames that go into the toolbar sized destinations, i.e. 24x24
set( BMAPS_MID
about
add_aligned_dimension
add_arc
add_board
add_bus2bus
add_bus
add_center_dimension
add_circle
add_component
add_corner
add_dashed_line
add_document
add_glabel
add_graphical_segments
add_graphical_polygon
add_hierarchical_label
add_hierar_pin
add_hierarchical_subsheet
add_junction
add_keepout_area
add_label
add_leader
add_library
add_line2bus
add_line_label
add_line
add_orthogonal_dimension
add_pcb_target
add_power
add_rectangle
add_symbol_to_schematic
add_tracks
add_via
add_zone_cutout
add_zone
align_items
align_items_left
align_items_right
align_items_top
align_items_bottom
align_items_center
align_items_middle
anchor
annotate_down_right
annotate_right_down
annotate
apply_pad_settings
array
auto_associate
auto_track_width
autoplace_fields
axis3d_back
axis3d_bottom
axis3d_front
axis3d_left
axis3d_right
axis3d_top
axis3d
break_line
bug
bus_definition_tool
cancel
change_entry_orient
contrast_mode
curved_ratsnest
checked_ok
color_materials
component_select_unit
config
convert
copy
copy_pad_settings
cursor_shape
cursor
custom_pad_to_primitives
cut
datasheet
delete_association
delete_gerber
delete_sheet
delete
directory
directory_browser
directory_open
distribute_horizontal
distribute_vertical
down
drag
drag_segment_withslope
drc
duplicate
edit_comp_footprint
edit_comp_ref
edit_comp_value
editor
edit_cmp_symb_links
edit
edge_to_copper_clearance
enter_sheet
ercerr
erc_green
ercwarn
erc
exit
exchange
export3d
export_cmp
export_dsn
export_idf
export_footprint_names
export_module
export_part
export_png
export_step
export_svg
export_to_pcbnew
export
fabrication
file_bom
file_drl
file_dsn
file_gbr
file_gerber_job
file_html
file_idf
file_pdf
file_pos
file_svg
fill_zone
filter
find
find_replace
flag
flip_board
gbr_select_mode2
gerbview_show_negative_objects
general_deletions
general_ratsnest
grid_select
grid_select_axis
grid
group
group_add
group_enter
group_leave
group_remove
group_ungroup
help
help_online
hidden_pin
hide_ratsnest
hierarchy_nav
hotkeys
hole_to_hole_clearance
hole_to_copper_clearance
icon_cvpcb_24
icon_footprint_browser
icon_gerbview_24
import3d
image
import_brd_file
import_document
import_footprint_names
import_hierarchical_label
import_module
import_part
import_project
import_vector
import
info
insert_module_board
language
layers_manager
leave_sheet
left
libedit
lib_next
lib_previous
library_browser
library_archive
library_archive_as
library
library_table
lines90
list_nets
load_drill
load_gerber
load_module_board
lock_unlock
locked
measurement
pcb_target
mirror_h
mirror_v
mode_module
module_editor
module_wizard
module_filtered_list
module_options
module_pin_filtered_list
module_library_list
module
morgan1
morgan2
move_exactly
move
move_relative
mw_add_gap
mw_add_line
mw_add_shape
mw_add_stub_arc
mw_add_stub
net_highlight
net_highlight_schematic
netlist
new_component
new_footprint
new_generic
new_project
new_project_with_template
noconn
normal
open_project
options_3drender
options_board
options_generic
options_pad
options_schematic
opt_show_polygon
ortho
pad_sketch
pad
pad_enumerate
pad_number
pads_mask_layers
pads_remove
path
pagelayout_normal_view_mode
pagelayout_special_view_mode
part_properties
paste
pin2pin
pin_size_to
pin_show_etype
pin_table
pin
plot
polar_coord
post_bom
post_compo
post_d356
post_drill
post_gencad
post_gerber
post_rpt
preference
print_button
project
project_close
project_kicad
ps_diff_pair
ps_diff_pair_gap
ps_diff_pair_tune_length
ps_diff_pair_tune_phase
ps_tune_length
push_pad_settings
puzzle_piece
py_script
recent
redo
refresh
reload
render_mode
rescue
right
router_len_tuner
router_len_tuner_setup
router_len_tuner_amplitude_decr
router_len_tuner_amplitude_incr
router_len_tuner_dist_decr
router_len_tuner_dist_incr
rotate_ccw
rotate_cw
rotate_ccw_x
rotate_cw_x
rotate_ccw_y
rotate_cw_y
rotate_ccw_z
rotate_cw_z
save_as
save_symbol_to_schematic
save_fp_to_board
save
select_layer_pair
select_w_layer
select_same_sheet
shape_3d
shape_3d_back
sheetset
simulator
sim_run
sim_stop
sim_tune
sim_probe
sim_add_signal
sim_settings
search_tree
set_origin
show_dcodenumber
show_footprint
show_mod_edge
show_ratsnest
showtrack
show_zone
show_zone_disable
show_zone_outline_only
show_all_layers
show_no_layers
show_no_copper_layers
show_all_copper_layers
show_all_front_layers
show_all_back_layers
show_front_assembly_layers
show_back_assembly_layers
special_tools
spreadsheet
swap_layer
switch_corner_rounding_shape
text
text_sketch
three_d
tool_ratsnest
tools
trash
undo
unit_inch
unit_mil
unit_mm
unknown
unlocked
unzip
up
update_pcb_from_sch
update_sch_from_pcb
use_3D_copper_thickness
via
via_annulus
via_buried
via_microvia
via_sketch
via_diameter
via_hole_diameter
width_track_via
width_track
zip
zone_duplicate
zone_fillet
zone_unfill
zoom_area
zoom_auto_fit_in_page
zoom_fit_in_page
zoom_fit_to_objects
zoom_center_on_screen
zoom_in
zoom_out
zoom_selection
)
# 24 x 24 for internal icons
set( BMAPS_24
icon_bitmap2component_24
icon_eeschema_24
icon_gerbview_24
icon_pagelayout_editor_24
icon_pcbcalculator_24
icon_pcbnew_24
)
# 32 x 32 for icon sets
set( BMAPS_32
icon_bitmap2component_32
icon_eeschema_32
icon_gerbview_32
icon_kicad_32
icon_libedit_32
icon_modedit_32
icon_pagelayout_editor_32
icon_pcbcalculator_32
icon_pcbnew_32
)
# 48 x 48 for now
set( BMAPS_BIG
dialog_warning
icon_3d
icon_cvpcb
icon_eeschema
icon_gerbview
icon_kicad
icon_libedit
icon_modedit
icon_pcbnew
icon_bitmap2component
icon_pagelayout_editor
icon_pcbcalculator
reannotate_down_left
reannotate_down_right
reannotate_left_down
reannotate_left_up
reannotate_right_down
reannotate_right_up
reannotate_up_left
reannotate_up_right
icon_pagelayout_editor
wizard_add_fplib_icon
)
# 64 x 64 for icon sets
set( BMAPS_64
icon_cvpcb
icon_eeschema
icon_gerbview
icon_kicad
icon_libedit
icon_modedit
icon_pcbnew
icon_pagelayout_editor
icon_bitmap2component
icon_pcbcalculator
)
# 128 x 128 for icon sets
set( BMAPS_128
icon_cvpcb
icon_eeschema
icon_gerbview
icon_kicad
icon_libedit
icon_modedit
icon_pcbnew
icon_pagelayout_editor
icon_bitmap2component
icon_pcbcalculator
)
set( BMAPS_OTHER
pads_npth
pads_npth_top_bottom
pads_npth_top
pads_npth_bottom
pads_remove_unused
pads_remove_unused_keep_bottom
pads_reset_unused
stroke_dash
stroke_dashdot
stroke_dot
stroke_solid
tune_diff_pair_length_legend
tune_diff_pair_skew_legend
tune_single_track_length_legend
)
# @todo keep these in sync with .bzrignore
set( TMP_DIR "${CMAKE_CURRENT_BINARY_DIR}/tmp" )
# true to generate log files, false to build icon files only
# generate logs is useful only if you have problems
set( CREATE_LOG_FILES false )
function( svg2png inputFile outFile pngWidth pngHeight )
#message( "svg2png( inputFile: ${inputFile} outFile: ${outFile} pngWidth: ${pngWidth} pngHeight: ${pngHeight})")
if( CREATE_LOG_FILES )
set( logfile "${TMP_DIR}/${bmn}.inkscape.log" )
else()
set( logfile "null" )
endif()
get_filename_component( bmn ${inputFile} NAME_WE )
add_custom_command(
OUTPUT ${outFile}
# this Inkscape command line is for old Inkscape version < 1.0
# COMMAND ${Inkscape_EXECUTABLE} --without-gui --export-area-snap -f ${inputFile} --export-png ${outFile}
# this Inkscape command line is for Inkscape >= 1.0
COMMAND ${Inkscape_EXECUTABLE} --export-area-snap --export-type="png" ${inputFile} --export-filename ${outFile}
-w ${pngWidth} -h ${pngHeight} > ${logfile}
DEPENDS ${inputFile}
COMMENT "Creating ${pngHeight} pixel tall ${outFile}"
)
endfunction()
# Function png2png
# converts a basic PNG to one
function( png2png inputFile outFile )
if( CREATE_LOG_FILES )
set( logfile "${TMP_DIR}/${bmn}.pngcrush.log" )
else()
set( logfile "null" )
endif()
get_filename_component( bmn ${inputFile} NAME_WE )
add_custom_command(
OUTPUT ${outFile}
# pngcrush all icons without background to remove any extraneous text records.
COMMAND ${pngcrush_EXECUTABLE} -rem alla ${inputFile} ${outFile} > ${logfile}
DEPENDS ${inputFile}
COMMENT "Creating cleaned file ${outFile}"
)
endfunction()
# Function png2cpp
# converts a single *.png to *.cpp
function( png2cpp inputFile outFile )
add_custom_command(
OUTPUT ${outFile}
COMMAND ${CMAKE_COMMAND} -DinputFile=${inputFile} -DoutCppFile=${outFile}
-P ${CMAKE_MODULE_PATH}/PNG2cpp.cmake
DEPENDS ${inputFile} ${CMAKE_MODULE_PATH}/PNG2cpp.cmake
COMMENT "Creating ${outFile}"
)
endfunction()
# Function bitmap_dir
# converts all the basenames in bmapList found in hardcoded 'sources' dir
# and and puts them into cpp_${pngHeight} and png_${pngHeight} directories.
function( bitmap_dir pngWidth pngHeight bmapList )
set( cppDir "${CMAKE_CURRENT_SOURCE_DIR}/cpp_${pngHeight}" )
set( pngDir "${CMAKE_CURRENT_SOURCE_DIR}/png_${pngHeight}" )
file( MAKE_DIRECTORY ${pngDir} ${cppDir} )
#file( REMOVE_RECURSE ${TMP_DIR} )
file( MAKE_DIRECTORY ${TMP_DIR} )
#svg2png( inputFile outFile pngWidth pngHeight )
foreach( bmn ${bmapList} )
set( pngFile "${pngDir}/${bmn}.png" )
set( cppFile "${cppDir}/${bmn}.cpp" )
set( tmpFile "${TMP_DIR}/${bmn}_${pngHeight}.png" )
#svg2png( inputFile outFile pngWidth pngHeight )
svg2png( ${CMAKE_CURRENT_SOURCE_DIR}/sources/${bmn}.svg ${tmpFile} ${pngWidth} ${pngHeight} )
#png2png( inputFile outFile )
png2png( ${tmpFile} ${pngFile} )
#png2cpp( inputFile outFile )
png2cpp( ${pngFile} ${cppFile} )
endforeach()
endfunction()
if( MAINTAIN_PNGS )
# Inkscape is required to convert SVG files to PNG files.
set( Inkscape_FOUND FALSE )
if( NOT Inkscape_FOUND )
find_program( Inkscape_EXECUTABLE inkscape
PATHS "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\Inkscape;InstallDir]"
DOC "Inkscape vector drawing program." )
if( NOT Inkscape_EXECUTABLE )
message( FATAL_ERROR "Could not find the Inkscape vector drawing program." )
else( NOT Inkscape_EXECUTABLE )
set( Inkscape_FOUND TRUE )
set( Inkscape_EXECUTABLE ${Inkscape_EXECUTABLE}
CACHE FILEPATH "Path and file name of the Inkscape program." )
message( STATUS "The Inkscape vector drawing program found." )
endif( NOT Inkscape_EXECUTABLE )
endif( NOT Inkscape_FOUND )
# pngcrush is required to reduce the size of the converted PNG files.
set( pngcrush_FOUND FALSE )
if( NOT pngcrush_FOUND )
find_program( pngcrush_EXECUTABLE pngcrush DOC "The PNG size reduction program." )
if( NOT pngcrush_EXECUTABLE )
message( FATAL_ERROR "Could not find the pngcrush PNG size reduction program." )
else( NOT pngcrush_EXECUTABLE )
set( pngcrush_FOUND TRUE )
set( pngcrush_EXECUTABLE ${pngcrush_EXECUTABLE}
CACHE FILEPATH "Path and file name of the pngcrush program." )
message( STATUS "The pngcrush PNG size reduction program found." )
endif( NOT pngcrush_EXECUTABLE )
endif( NOT pngcrush_FOUND )
# these 3 cmake commands for each desired bitmap size set, repeat as needed:
bitmap_dir( 16 16 "${BMAPS_SMALL}" )
bitmap_dir( 24 24 "${BMAPS_MID}" )
bitmap_dir( 32 32 "${BMAPS_32}" )
bitmap_dir( 22 22 "${BMAPS_22}" )
bitmap_dir( 24 24 "${BMAPS_24}" )
bitmap_dir( 64 64 "${BMAPS_64}" )
bitmap_dir( 128 128 "${BMAPS_128}" )
bitmap_dir( 48 48 "${BMAPS_BIG}" )
endif( MAINTAIN_PNGS )
#message( "CPP_LIST: ${CPP_LIST}" )
# a target with no output, just so changes get built
#add_custom_target( make_cpp_files ALL DEPENDS ${CPP_LIST} )
set( CPP_LIST "" )
foreach( bmn ${BMAPS_SMALL} )
#message( "library add cpp_16/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_16/${bmn}.cpp )
endforeach()
foreach( bmn ${BMAPS_MID} )
#message( "library add cpp_24/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_24/${bmn}.cpp )
endforeach()
foreach( bmn ${BMAPS_24} )
#message( "library add cpp_24/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_24/${bmn}.cpp )
endforeach()
foreach( bmn ${BMAPS_32} )
#message( "library add cpp_32/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_32/${bmn}.cpp )
endforeach()
foreach( bmn ${BMAPS_BIG} )
#message( "library add cpp_48/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_48/${bmn}.cpp )
endforeach()
foreach( bmn ${BMAPS_OTHER} )
#message( "library add cpp_other/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_other/${bmn}.cpp )
endforeach()
# Commented out to prevent name smashing in the library
# Uncomment to regenerate for icon sets
# TODO: make this build automatic
#foreach( bmn ${BMAPS_22} )
#message( "library add cpp_22/${bmn}.cpp" )
# list( APPEND CPP_LIST cpp_22/${bmn}.cpp )
#endforeach()
#foreach( bmn ${BMAPS_64} )
#message( "library add cpp_64/${bmn}.cpp" )
# list( APPEND CPP_LIST cpp_64/${bmn}.cpp )
#endforeach()
#foreach( bmn ${BMAPS_128} )
#message( "library add cpp_128/${bmn}.cpp" )
# list( APPEND CPP_LIST cpp_128/${bmn}.cpp )
#endforeach()
#add_library( bitmaps SHARED ${CPP_LIST} )
add_library( bitmaps STATIC ${CPP_LIST} )
target_include_directories( bitmaps PUBLIC
include
)