kicad/eeschema/schematic_undo_redo.cpp

477 lines
14 KiB
C++

/************************************************************/
/* eeschema: undo and redo functions for schematic editor */
/************************************************************/
#include "fctsys.h"
#include "class_drawpanel.h"
#include "class_sch_screen.h"
#include "wxEeschemaStruct.h"
#include "general.h"
#include "protos.h"
#include "sch_bus_entry.h"
#include "sch_marker.h"
#include "sch_junction.h"
#include "sch_line.h"
#include "sch_no_connect.h"
#include "sch_component.h"
#include "sch_polyline.h"
#include "sch_sheet.h"
#include "sch_bitmap.h"
/* Functions to undo and redo edit commands.
* commands to undo are stored in CurrentScreen->m_UndoList
* commands to redo are stored in CurrentScreen->m_RedoList
*
* m_UndoList and m_RedoList handle a std::vector of PICKED_ITEMS_LIST
* Each PICKED_ITEMS_LIST handle a std::vector of pickers (class ITEM_PICKER),
* that store the list of schematic items that are concerned by the command to
* undo or redo and is created for each command to undo (handle also a command
* to redo). each picker has a pointer pointing to an item to undo or redo (in
* fact: deleted, added or modified), and has a pointer to a copy of this item,
* when this item has been modified (the old values of parameters are
* therefore saved)
*
* there are 3 cases:
* - delete item(s) command
* - change item(s) command
* - add item(s) command
* and 2 cases for block:
* - move list of items
* - mirror (Y) list of items
*
* Undo command
* - delete item(s) command:
* => deleted items are moved in undo list
*
* - change item(s) command
* => A copy of item(s) is made (a DrawPickedStruct list of wrappers)
* the .m_Link member of each wrapper points the modified item.
* the .m_Item member of each wrapper points the old copy of this item.
*
* - add item(s) command
* =>A list of item(s) is made. The .m_Item member of each wrapper points
* the new item.
*
* Redo command
* - delete item(s) old command:
* => deleted items are moved in GetDrawItems() list, and in
*
* - change item(s) command
* => the copy of item(s) is moved in Undo list
*
* - add item(s) command
* => The list of item(s) is used to create a deleted list in undo
* list(same as a delete command)
*
* Some block operations that change items can be undone without memorized
* items, just the coordinates of the transform: move list of items (undo/
* redo is made by moving with the opposite move vector) mirror (Y) and flip
* list of items (undo/redo is made by mirror or flip items) so they are
* handled specifically.
*
* A problem is the hierarchical sheet handling.
* the data associated (sub-hierarchy, undo/redo list) is deleted only
* when the sheet is really deleted (i.e. when deleted from undo or redo list)
* This is handled by its destructor.
*/
/* Used if undo / redo command:
* swap data between Item and its copy, pointed by its .m_Image member
* swapped data is data modified by edition, so not all values are swapped
*/
void SwapData( EDA_ITEM* aItem, EDA_ITEM* aImage )
{
if( aItem == NULL || aImage == NULL )
{
wxMessageBox( wxT( "SwapData error: NULL pointer" ) );
return;
}
switch( aItem->Type() )
{
case SCH_POLYLINE_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_POLYLINE*) aItem )
#define DEST ( (SCH_POLYLINE*) aImage )
break;
case SCH_JUNCTION_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_JUNCTION*) aItem )
#define DEST ( (SCH_JUNCTION*) aImage )
EXCHG( SOURCE->m_Pos, DEST->m_Pos );
break;
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_TEXT*) aItem )
#define DEST ( (SCH_TEXT*) aImage )
DEST->SwapData( SOURCE );
break;
case SCH_COMPONENT_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_COMPONENT*) aItem )
#define DEST ( (SCH_COMPONENT*) aImage )
DEST->SwapData( SOURCE );
break;
case SCH_LINE_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_LINE*) aItem )
#define DEST ( (SCH_LINE*) aImage )
EXCHG( SOURCE->m_Start, DEST->m_Start );
EXCHG( SOURCE->m_End, DEST->m_End );
break;
case SCH_BUS_ENTRY_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_BUS_ENTRY*) aItem )
#define DEST ( (SCH_BUS_ENTRY*) aImage )
EXCHG( SOURCE->m_Pos, DEST->m_Pos );
EXCHG( SOURCE->m_Size, DEST->m_Size );
break;
case SCH_SHEET_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_SHEET*) aItem )
#define DEST ( (SCH_SHEET*) aImage )
DEST->SwapData( SOURCE );
break;
case SCH_MARKER_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_MARKER*) aItem )
#define DEST ( (SCH_MARKER*) aImage )
EXCHG( SOURCE->m_Pos, DEST->m_Pos );
break;
case SCH_SHEET_PIN_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_SHEET_PIN*) aItem )
#define DEST ( (SCH_SHEET_PIN*) aImage )
DEST->SwapData( SOURCE );
break;
case SCH_NO_CONNECT_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_NO_CONNECT*) aItem )
#define DEST ( (SCH_NO_CONNECT*) aImage )
EXCHG( SOURCE->m_Pos, DEST->m_Pos );
break;
case SCH_BITMAP_T:
#undef SOURCE
#undef DEST
#define SOURCE ( (SCH_BITMAP*) aItem )
#define DEST ( (SCH_BITMAP*) aImage )
DEST->SwapData( SOURCE );
break;
case SCH_FIELD_T:
break;
// not directly used in schematic:
default:
wxMessageBox( wxT( "SwapData() error: unexpected type" ) );
break;
}
}
void SCH_EDIT_FRAME::SaveCopyInUndoList( SCH_ITEM* aItem,
UNDO_REDO_T aCommandType,
const wxPoint& aTransformPoint )
{
/* Does not save a null item.
* but if aCommandType == UR_WIRE_IMAGE, we must save null item.
* It happens for the first wire entered in schematic:
* To undo this first command, the previous state is a NULL item,
* and we accept this
*/
if( aItem == NULL && ( aCommandType != UR_WIRE_IMAGE ) )
return;
SCH_ITEM* CopyOfItem;
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
ITEM_PICKER itemWrapper( aItem, aCommandType );
if( aItem )
{
itemWrapper.m_PickedItemType = aItem->Type();
itemWrapper.m_PickerFlags = aItem->GetFlags();
}
switch( aCommandType )
{
case UR_CHANGED: /* Create a copy of item */
CopyOfItem = DuplicateStruct( aItem, true );
itemWrapper.m_Link = CopyOfItem;
if( CopyOfItem )
commandToUndo->PushItem( itemWrapper );
break;
case UR_NEW:
case UR_WIRE_IMAGE:
case UR_DELETED:
case UR_ROTATED:
case UR_MOVED:
commandToUndo->PushItem( itemWrapper );
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ),
aCommandType );
wxMessageBox( msg );
}
break;
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after new save there is no redo to do */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else
delete commandToUndo;
}
void SCH_EDIT_FRAME::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// Copy picker list:
commandToUndo->CopyList( aItemsList );
// Verify list, and creates data if needed
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) commandToUndo->GetPickedItem( ii );
wxASSERT( item );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
switch( command )
{
case UR_CHANGED: /* Create a copy of item */
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
commandToUndo->SetPickedItemLink( DuplicateStruct( item, true ), ii );
wxASSERT( commandToUndo->GetPickedItemLink( ii ) );
break;
case UR_MOVED:
case UR_MIRRORED_Y:
case UR_MIRRORED_X:
case UR_ROTATED:
case UR_NEW:
case UR_DELETED:
case UR_EXCHANGE_T:
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unknown undo/redo command %d" ), command ) );
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after new save there is no redo to do */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
delete commandToUndo;
}
void SCH_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand )
{
SCH_ITEM* item;
SCH_ITEM* alt_item;
// Undo in the reverse order of list creation: (this can allow stacked
// changes like the same item can be changes and deleted in the same
// complex command
for( int ii = aList->GetCount() - 1; ii >= 0; ii-- )
{
item = (SCH_ITEM*) aList->GetPickedItem( ii );
if( item )
item->ClearFlags();
SCH_ITEM* image = (SCH_ITEM*) aList->GetPickedItemLink( ii );
switch( aList->GetPickedItemStatus( ii ) )
{
case UR_CHANGED: /* Exchange old and new data for each item */
SwapData( item, image );
break;
case UR_NEW: /* new items are deleted */
aList->SetPickedItemStatus( UR_DELETED, ii );
GetScreen()->RemoveFromDrawList( item );
break;
case UR_DELETED: /* deleted items are put in EEdrawList, as new items */
aList->SetPickedItemStatus( UR_NEW, ii );
item->SetNext( GetScreen()->GetDrawItems() );
GetScreen()->SetDrawItems( item );
break;
case UR_MOVED:
item->ClearFlags();
item->SetFlags( aList->GetPickerFlags( ii ) );
item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint );
item->ClearFlags();
break;
case UR_MIRRORED_Y:
{
wxPoint mirrorPoint = aList->m_TransformPoint;
item->Mirror_Y( mirrorPoint.x );
}
break;
case UR_MIRRORED_X:
{
wxPoint mirrorPoint = aList->m_TransformPoint;
item->Mirror_X( mirrorPoint.y );
}
break;
case UR_ROTATED:
{
// To undo a rotate 90 deg transform we must rotate 270 deg to undo
// and 90 deg to redo:
wxPoint RotationPoint = aList->m_TransformPoint;
item->Rotate( RotationPoint );
if( aRedoCommand )
break; // A only one rotate transform is OK
// Make 3 rotate 90 deg transforms is this is actually an undo command
item->Rotate( RotationPoint );
item->Rotate( RotationPoint );
}
break;
case UR_WIRE_IMAGE:
/* Exchange the current wires and the old wires */
alt_item = GetScreen()->ExtractWires( false );
aList->SetPickedItem( alt_item, ii );
while( item )
{
SCH_ITEM* nextitem = item->Next();
item->SetNext( GetScreen()->GetDrawItems() );
GetScreen()->SetDrawItems( item );
item->ClearFlags();
item = nextitem;
}
break;
case UR_EXCHANGE_T:
alt_item = (SCH_ITEM*) aList->GetPickedItemLink( ii );
alt_item->SetNext( NULL );
alt_item->SetBack( NULL );
GetScreen()->RemoveFromDrawList( item );
GetScreen()->AddToDrawList( alt_item );
aList->SetPickedItem( alt_item, ii );
aList->SetPickedItemLink( item, ii );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unknown undo/redo command %d" ),
aList->GetPickedItemStatus( ii ) ) );
break;
}
}
}
void SCH_EDIT_FRAME::GetSchematicFromUndoList( wxCommandEvent& event )
{
if( GetScreen()->GetUndoCommandCount() <= 0 )
return;
/* Get the old list */
PICKED_ITEMS_LIST* List = GetScreen()->PopCommandFromUndoList();
/* Undo the command */
PutDataInPreviousState( List, false );
/* Put the old list in RedoList */
List->ReversePickersListOrder();
GetScreen()->PushCommandToRedoList( List );
OnModify();
SetSheetNumberAndCount();
GetScreen()->TestDanglingEnds();
DrawPanel->Refresh();
}
void SCH_EDIT_FRAME::GetSchematicFromRedoList( wxCommandEvent& event )
{
if( GetScreen()->GetRedoCommandCount() == 0 )
return;
/* Get the old list */
PICKED_ITEMS_LIST* List = GetScreen()->PopCommandFromRedoList();
/* Redo the command: */
PutDataInPreviousState( List, true );
/* Put the old list in UndoList */
List->ReversePickersListOrder();
GetScreen()->PushCommandToUndoList( List );
OnModify();
SetSheetNumberAndCount();
GetScreen()->TestDanglingEnds();
DrawPanel->Refresh();
}