kicad/eeschema/eecreate.cpp

552 lines
17 KiB
C++
Raw Blame History

/*********************************************************/
/* Modules de creations de Traits, Wires, Bus, Junctions */
/*********************************************************/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "program.h"
#include "libcmp.h"
#include "general.h"
#include "protos.h"
#include "schframe.h"
#include "schframe.h"
/* Routines Locales */
static void Polyline_in_Ghost( WinEDA_DrawPanel* panel, wxDC* DC, bool erase );
static void Segment_in_Ghost( WinEDA_DrawPanel* panel, wxDC* DC, bool erase );
static void ExitTrace( WinEDA_DrawFrame* frame, wxDC* DC );
static bool IsTerminalPoint( SCH_SCREEN* screen, const wxPoint& pos, int layer );
/*************************************************************/
void WinEDA_SchematicFrame::BeginSegment( wxDC* DC, int type )
/*************************************************************/
/* Routine de Trace de segments ( WIRES, BUS ) pour lesquels chaque segment
* est une structure.
*/
// NOT USED!!!@!@!
{
DrawSegmentStruct* oldsegment, * newsegment;
wxPoint pos = GetScreen()->m_Curseur;
if( GetScreen()->GetCurItem()
&& (GetScreen()->GetCurItem()->m_Flags == 0) )
GetScreen()->SetCurItem( NULL );
if( GetScreen()->GetCurItem() )
{
switch( GetScreen()->GetCurItem()->Type() )
{
case DRAW_SEGMENT_STRUCT_TYPE:
case DRAW_POLYLINE_STRUCT_TYPE:
break;
default:
return;
}
}
oldsegment = newsegment =
(DrawSegmentStruct*) GetScreen()->GetCurItem();
if( !newsegment ) /* 1er point : creation de la 1ere structure */
{
switch( type )
{
default:
newsegment = new DrawSegmentStruct( pos, LAYER_NOTES );
break;
case LAYER_WIRE:
newsegment = new DrawSegmentStruct( pos, LAYER_WIRE );
if( LocatePinEnd( GetScreen()->EEDrawList, pos ) )
newsegment->m_StartIsDangling = FALSE;
break;
case LAYER_BUS:
newsegment = new DrawSegmentStruct( pos, LAYER_BUS );
break;
}
newsegment->m_Flags = IS_NEW;
GetScreen()->SetCurItem( newsegment );
GetScreen()->ManageCurseur = Segment_in_Ghost;
GetScreen()->ForceCloseManageCurseur = ExitTrace;
g_ItemToRepeat = NULL;
}
else /* Trace en cours: Placement d'un point supplementaire */
{
if( (oldsegment->m_Start.x == oldsegment->m_End.x)
&& (oldsegment->m_Start.y == oldsegment->m_End.y) ) /* Structure inutile */
return;
GetScreen()->ManageCurseur( DrawPanel, DC, FALSE );
oldsegment->m_EndIsDangling = FALSE;
/* Creation du segment suivant ou fin de trac<61> si point sur pin, jonction ...*/
if( IsTerminalPoint( GetScreen(), oldsegment->m_End, oldsegment->m_Layer ) )
{
EndSegment( DC ); return;
}
/* Placement en liste generale */
oldsegment->Pnext = GetScreen()->EEDrawList;
g_ItemToRepeat = GetScreen()->EEDrawList = oldsegment;
GetScreen()->CursorOff( DrawPanel, DC ); // Erase schematic cursor
RedrawOneStruct( DrawPanel, DC, oldsegment, GR_DEFAULT_DRAWMODE );
GetScreen()->CursorOn( DrawPanel, DC ); // Display schematic cursor
/* Creation du segment suivant */
newsegment = oldsegment->GenCopy();
newsegment->m_Start = oldsegment->m_End;
newsegment->m_End = pos;
oldsegment->m_Flags = 0;
newsegment->m_Flags = IS_NEW;
GetScreen()->SetCurItem( newsegment );
GetScreen()->ManageCurseur( DrawPanel, DC, FALSE );
newsegment->m_StartIsDangling = FALSE;
newsegment->m_EndIsDangling = TRUE;
}
}
/*************************************************************/
/* Routine de fin de trace d'une struct segment (Wire, Bus */
/*************************************************************/
void WinEDA_SchematicFrame::EndSegment( wxDC* DC )
{
DrawSegmentStruct* segment = (DrawSegmentStruct*) GetScreen()->GetCurItem();
if( GetScreen()->ManageCurseur == NULL )
return;
if( segment == NULL )
return;
if( (segment->m_Flags & IS_NEW) == 0 )
return;
if( (segment->m_Start.x == segment->m_End.x)
&& (segment->m_Start.y == segment->m_End.y) )/* Structure inutile */
{
EraseStruct( segment, (SCH_SCREEN*) GetScreen() );
segment = NULL;
}
else
{
/* Placement en liste generale */
GetScreen()->ManageCurseur( DrawPanel, DC, FALSE );
segment->Pnext = GetScreen()->EEDrawList;
g_ItemToRepeat = GetScreen()->EEDrawList = segment;
segment->m_Flags = 0;
}
/* Fin de trace */
GetScreen()->ManageCurseur = NULL;
GetScreen()->ForceCloseManageCurseur = NULL;
GetScreen()->SetCurItem( NULL );
TestDanglingEnds( GetScreen()->EEDrawList, DC );
SetFlagModify( GetScreen() );
if( segment )
{
GetScreen()->CursorOff( DrawPanel, DC ); // Erase schematic cursor
RedrawOneStruct( DrawPanel, DC, segment, GR_DEFAULT_DRAWMODE );
GetScreen()->CursorOn( DrawPanel, DC ); // Display schematic cursor
}
}
/****************************************************************************/
static void Segment_in_Ghost( WinEDA_DrawPanel* panel, wxDC* DC, bool erase )
/****************************************************************************/
/* Dessin du Segment Fantome lors des deplacements du curseur
*/
{
DrawSegmentStruct* segment =
(DrawSegmentStruct*) panel->m_Parent->GetScreen()->GetCurItem();
wxPoint endpos;
int color;
if( segment == NULL )
return;
color = ReturnLayerColor( segment->m_Layer ) ^ HIGHT_LIGHT_FLAG;
endpos = panel->m_Parent->GetScreen()->m_Curseur;
if( g_HVLines ) /* Coerce the line to vertical or horizontal one: */
{
if( ABS( endpos.x - segment->m_Start.x ) < ABS( endpos.y - segment->m_Start.y ) )
endpos.x = segment->m_Start.x;
else
endpos.y = segment->m_Start.y;
}
if( erase ) // Redraw if segment lengtht != 0
{
if( (segment->m_Start.x != segment->m_End.x)
|| (segment->m_Start.y != segment->m_End.y) )
RedrawOneStruct( panel, DC, segment, XOR_MODE, color );
}
segment->m_End = endpos;
// Redraw if segment lengtht != 0
if( (segment->m_Start.x != segment->m_End.x)
|| (segment->m_Start.y != segment->m_End.y) )
RedrawOneStruct( panel, DC, segment, XOR_MODE, color );
}
/*****************************************************************************/
static void Polyline_in_Ghost( WinEDA_DrawPanel* panel, wxDC* DC, bool erase )
/*****************************************************************************/
/* Dessin du du Polyline Fantome lors des deplacements du curseur
*/
{
DrawPolylineStruct* NewPoly =
(DrawPolylineStruct*) panel->m_Parent->GetScreen()->GetCurItem();
int color;
wxPoint endpos;
endpos = panel->m_Parent->GetScreen()->m_Curseur;
color = ReturnLayerColor( NewPoly->m_Layer );
GRSetDrawMode( DC, XOR_MODE );
if( g_HVLines )
{
/* Coerce the line to vertical or horizontal one: */
if( ABS( endpos.x - NewPoly->m_Points[NewPoly->m_NumOfPoints * 2 - 2] ) <
ABS( endpos.y - NewPoly->m_Points[NewPoly->m_NumOfPoints * 2 - 1] ) )
endpos.x = NewPoly->m_Points[NewPoly->m_NumOfPoints * 2 - 2];
else
endpos.y = NewPoly->m_Points[NewPoly->m_NumOfPoints * 2 - 1];
}
NewPoly->m_NumOfPoints++;
if( erase )
RedrawOneStruct( panel, DC, NewPoly, XOR_MODE, color );
NewPoly->m_Points[NewPoly->m_NumOfPoints * 2 - 2] = endpos.x;
NewPoly->m_Points[NewPoly->m_NumOfPoints * 2 - 1] = endpos.y;
RedrawOneStruct( panel, DC, NewPoly, XOR_MODE, color );
NewPoly->m_NumOfPoints--;
}
/**********************************************************/
void WinEDA_SchematicFrame::DeleteCurrentSegment( wxDC* DC )
/**********************************************************/
/*
* Routine effacant le dernier trait trace, ou l'element pointe par la souris
*/
{
g_ItemToRepeat = NULL;
if( (GetScreen()->GetCurItem() == NULL)
|| ( (GetScreen()->GetCurItem()->m_Flags & IS_NEW) == 0 ) )
{
return;
}
/* Trace en cours: annulation */
if( GetScreen()->GetCurItem()->Type() == DRAW_POLYLINE_STRUCT_TYPE )
{
Polyline_in_Ghost( DrawPanel, DC, FALSE ); /* Effacement du trace en cours */
}
else
{
Segment_in_Ghost( DrawPanel, DC, FALSE ); /* Effacement du trace en cours */
}
EraseStruct( GetScreen()->GetCurItem(), GetScreen() );
GetScreen()->ManageCurseur = NULL;
GetScreen()->SetCurItem( NULL );
}
/***************************************************************************/
EDA_BaseStruct* WinEDA_SchematicFrame::CreateNewJunctionStruct( wxDC* DC )
/***************************************************************************/
/* Routine to create new connection struct.
*/
{
DrawJunctionStruct* NewConnect;
NewConnect = new DrawJunctionStruct( GetScreen()->m_Curseur );
g_ItemToRepeat = NewConnect;
GetScreen()->CursorOff( DrawPanel, DC ); // Erase schematic cursor
RedrawOneStruct( DrawPanel, DC, NewConnect, GR_DEFAULT_DRAWMODE );
GetScreen()->CursorOn( DrawPanel, DC ); // Display schematic cursor
NewConnect->Pnext = GetScreen()->EEDrawList;
GetScreen()->EEDrawList = NewConnect;
SetFlagModify( GetScreen() );
return NewConnect;
}
/*************************************************************************/
EDA_BaseStruct* WinEDA_SchematicFrame::CreateNewNoConnectStruct( wxDC* DC )
/*************************************************************************/
/*Routine to create new NoConnect struct. ( Symbole de Non Connexion)
*/
{
DrawNoConnectStruct* NewNoConnect;
NewNoConnect = new DrawNoConnectStruct( GetScreen()->m_Curseur );
g_ItemToRepeat = NewNoConnect;
GetScreen()->CursorOff( DrawPanel, DC ); // Erase schematic cursor
RedrawOneStruct( DrawPanel, DC, NewNoConnect, GR_DEFAULT_DRAWMODE );
GetScreen()->CursorOn( DrawPanel, DC ); // Display schematic cursor
NewNoConnect->Pnext = GetScreen()->EEDrawList;
GetScreen()->EEDrawList = NewNoConnect;
SetFlagModify( GetScreen() );
return NewNoConnect;
}
/**********************************************************/
static void ExitTrace( WinEDA_DrawFrame* frame, wxDC* DC )
/**********************************************************/
/* Routine de sortie des menus de trace */
{
BASE_SCREEN* Screen = frame->GetScreen();
if( Screen->GetCurItem() ) /* trace en cours */
{
Screen->ManageCurseur( frame->DrawPanel, DC, FALSE );
Screen->ManageCurseur = NULL;
Screen->ForceCloseManageCurseur = NULL;
EraseStruct( Screen->GetCurItem(), (SCH_SCREEN*) Screen );
Screen->SetCurItem( NULL );
return;
}
else
g_ItemToRepeat = NULL; // Fin de commande generale
}
/***************************************************/
void WinEDA_SchematicFrame::RepeatDrawItem( wxDC* DC )
/***************************************************/
/* Routine de recopie du dernier element dessine
* Les elements duplicables sont
* fils, bus, traits, textes, labels
* Les labels termines par un nombre seront incrementes
*/
{
char Line[256];
int ox = 0, oy = 0;
if( g_ItemToRepeat == NULL )
return;
switch( g_ItemToRepeat->Type() )
{
case DRAW_JUNCTION_STRUCT_TYPE:
#undef STRUCT
#define STRUCT ( (DrawJunctionStruct*) g_ItemToRepeat )
g_ItemToRepeat = STRUCT->GenCopy();
STRUCT->m_Pos.x += g_RepeatStep.x; ox = STRUCT->m_Pos.x;
STRUCT->m_Pos.y += g_RepeatStep.y; oy = STRUCT->m_Pos.y;
break;
case DRAW_NOCONNECT_STRUCT_TYPE:
#undef STRUCT
#define STRUCT ( (DrawNoConnectStruct*) g_ItemToRepeat )
g_ItemToRepeat = STRUCT->GenCopy();
STRUCT->m_Pos.x += g_RepeatStep.x; ox = STRUCT->m_Pos.x;
STRUCT->m_Pos.y += g_RepeatStep.y; oy = STRUCT->m_Pos.y;
break;
case TYPE_SCH_TEXT:
#undef STRUCT
#define STRUCT ( (SCH_TEXT*) g_ItemToRepeat )
g_ItemToRepeat = STRUCT->GenCopy();
STRUCT->m_Pos.x += g_RepeatStep.x; ox = STRUCT->m_Pos.x;
STRUCT->m_Pos.y += g_RepeatStep.y; oy = STRUCT->m_Pos.y;
/*** Increment du numero de label ***/
strcpy( Line, STRUCT->GetText() );
IncrementLabelMember( Line );
STRUCT->m_Text = Line;
break;
case TYPE_SCH_LABEL:
case TYPE_SCH_GLOBALLABEL:
case TYPE_SCH_HIERLABEL:
#undef STRUCT
#define STRUCT ( (SCH_LABEL*) g_ItemToRepeat )
g_ItemToRepeat = STRUCT->GenCopy();
STRUCT->m_Pos.x += g_RepeatStep.x; ox = STRUCT->m_Pos.x;
STRUCT->m_Pos.y += g_RepeatStep.y; oy = STRUCT->m_Pos.y;
/*** Increment du numero de label ***/
strcpy( Line, STRUCT->GetText() );
IncrementLabelMember( Line );
STRUCT->m_Text = Line;
break;
case DRAW_SEGMENT_STRUCT_TYPE:
#undef STRUCT
#define STRUCT ( (DrawSegmentStruct*) g_ItemToRepeat )
g_ItemToRepeat = STRUCT->GenCopy();
STRUCT->m_Start.x += g_RepeatStep.x; ox = STRUCT->m_Start.x;
STRUCT->m_Start.y += g_RepeatStep.y; oy = STRUCT->m_Start.y;
STRUCT->m_End.x += g_RepeatStep.x;
STRUCT->m_End.y += g_RepeatStep.y;
break;
case DRAW_RACCORD_STRUCT_TYPE:
#undef STRUCT
#define STRUCT ( (DrawRaccordStruct*) g_ItemToRepeat )
g_ItemToRepeat = STRUCT->GenCopy();
STRUCT->m_Pos.x += g_RepeatStep.x; ox = STRUCT->m_Pos.x;
STRUCT->m_Pos.y += g_RepeatStep.y; oy = STRUCT->m_Pos.y;
break;
default:
g_ItemToRepeat = NULL;
DisplayError( this, "Repeat Type Error", 10 );
break;
}
if( g_ItemToRepeat )
{
g_ItemToRepeat->Pnext = GetScreen()->EEDrawList;
GetScreen()->EEDrawList = g_ItemToRepeat;
TestDanglingEnds( GetScreen()->EEDrawList, NULL );
RedrawOneStruct( DrawPanel, DC, g_ItemToRepeat, GR_DEFAULT_DRAWMODE );
// GetScreen()->Curseur.x = ox; GetScreen()->Curseur.x = oy;
// GRMouseWarp(DrawPanel, DrawPanel->CursorScreenPosition() );
}
}
/******************************************/
void IncrementLabelMember( char* Line )
/******************************************/
/* Routine incrementant les labels, c'est a dire pour les textes finissant
* par un nombre, ajoutant <RepeatDeltaLabel> a ce nombre
*/
{
char* strnum;
int ii;
strnum = Line + strlen( Line ) - 1;
if( !isdigit( *strnum ) )
return;
while( (strnum >= Line) && isdigit( *strnum ) )
strnum--;
strnum++; /* pointe le debut de la chaine des digits */
ii = atoi( strnum ) + g_RepeatDeltaLabel;
sprintf( strnum, "%d", ii );
}
/***************************************************************************/
static bool IsTerminalPoint( SCH_SCREEN* screen, const wxPoint& pos, int layer )
/***************************************************************************/
/* Returne TRUE si pos est un point possible pour terminer automatiquement un
* segment, c'est a dire pour
* - type WIRE, si il y a
* - une jonction
* - ou une pin
* - ou une extr<74>mit<69> unique de fil
*
* - type BUS, si il y a
* - ou une extr<74>mit<69> unique de BUS
*/
{
EDA_BaseStruct* item;
LibDrawPin* pin;
DrawLibItemStruct* LibItem = NULL;
DrawSheetLabelStruct* pinsheet;
wxPoint itempos;
switch( layer )
{
case LAYER_BUS:
item = PickStruct( screen, BUSITEM );
if( item )
return TRUE;
pinsheet = LocateAnyPinSheet( pos, screen->EEDrawList );
if( pinsheet && IsBusLabel( pinsheet->GetText() ) )
{
itempos = pinsheet->m_Pos;
if( (itempos.x == pos.x) && (itempos.y == pos.y) )
return TRUE;
}
break;
case LAYER_NOTES:
item = PickStruct( screen, DRAWITEM );
if( item )
return TRUE;
break;
case LAYER_WIRE:
item = PickStruct( screen, RACCORDITEM | JUNCTIONITEM );
if( item )
return TRUE;
pin = LocateAnyPin( screen->EEDrawList, pos, &LibItem );
if( pin && LibItem )
{
// calcul de la position exacte du point de connexion de la pin,
// selon orientation du composant:
itempos = LibItem->GetScreenCoord( pin->m_Pos );
itempos.x += LibItem->m_Pos.x;
itempos.y += LibItem->m_Pos.y;
if( (itempos.x == pos.x) && (itempos.y == pos.y) )
return TRUE;
}
item = PickStruct( screen, WIREITEM );
if( item )
return TRUE;
item = PickStruct( screen, LABELITEM );
if( item && (item->Type() != TYPE_SCH_TEXT)
&& ( ( (SCH_GLOBALLABEL*) item )->m_Pos.x == pos.x )
&& ( ( (SCH_GLOBALLABEL*) item )->m_Pos.y == pos.y ) )
return TRUE;
pinsheet = LocateAnyPinSheet( pos, screen->EEDrawList );
if( pinsheet && !IsBusLabel( pinsheet->GetText() ) )
{
itempos = pinsheet->m_Pos;
if( (itempos.x == pos.x) && (itempos.y == pos.y) )
return TRUE;
}
break;
default:
break;
}
return FALSE;
}