kicad/gerbview/files.cpp

239 lines
6.8 KiB
C++

/*************/
/* files.cpp */
/*************/
#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "gestfich.h"
#include "gerbview.h"
#include "pcbplot.h"
static void LoadDCodeFile( WinEDA_GerberFrame* frame,
const wxString& FullFileName );
/* Load a Gerber file selected from history list on current layer
* Previous data is deleted
*/
void WinEDA_GerberFrame::OnFileHistory( wxCommandEvent& event )
{
wxString fn;
fn = GetFileFromHistory( event.GetId(), _( "Printed circuit board" ) );
if( fn != wxEmptyString )
{
Erase_Current_Layer( false );
LoadOneGerberFile( fn, false );
}
}
/* File commands. */
void WinEDA_GerberFrame::Files_io( wxCommandEvent& event )
{
int id = event.GetId();
switch( id )
{
case wxID_FILE:
{
wxString fileName = GetScreen()->m_FileName;
Erase_Current_Layer( false );
LoadOneGerberFile( fileName, true );
break;
}
case ID_MENU_INC_LAYER_AND_APPEND_FILE:
case ID_INC_LAYER_AND_APPEND_FILE:
{
int origLayer = getActiveLayer();
if( origLayer < NB_LAYERS )
{
setActiveLayer(origLayer+1);
Erase_Current_Layer( false );
if( !LoadOneGerberFile( wxEmptyString ) )
setActiveLayer(origLayer);
SetToolbars();
}
else
{
wxString msg;
msg.Printf( _( "GerbView only supports a maximum of %d layers. You must first \
delete an existing layer to load any new layers." ), NB_LAYERS );
wxMessageBox( msg );
}
}
break;
case ID_NEW_BOARD:
Clear_Pcb( true );
Zoom_Automatique( false );
DrawPanel->Refresh();
ClearMsgPanel();
break;
case ID_GERBVIEW_LOAD_DRILL_FILE:
DisplayError( this, _( "Not yet available..." ) );
break;
case ID_GERBVIEW_LOAD_DCODE_FILE:
LoadDCodeFile( this, wxEmptyString );
break;
default:
DisplayError( this, wxT( "File_io Internal Error" ) );
break;
}
}
bool WinEDA_GerberFrame::LoadOneGerberFile( const wxString& aFullFileName, bool aOpenFileDialog )
{
wxString filetypes;
wxFileName filename = aFullFileName;
ActiveScreen = GetScreen();
if( !filename.IsOk() || aOpenFileDialog )
{
/* Standard gerber filetypes
* (See http://en.wikipedia.org/wiki/Gerber_File)
* the .pho extension is the default used in Pcbnew
* However there are a lot of other extensions used for gerber files
* Because the first letter is usually g, we accept g* as extension
* (Mainly internal copper layers do not have specific extention,
* and filenames are like *.g1, *.g2 *.gb1 ...).
*/
filetypes = _( "Gerber files (.g* .lgr .pho)" );
filetypes << wxT("|");
filetypes += wxT("*.g*;*.G*;*.lgr;*.LGR;*.pho;*.PHO" );
filetypes << wxT("|");
/* Special gerber filetypes */
filetypes += _( "Top layer (*.GTL)|*.GTL;*.gtl|" );
filetypes += _( "Bottom layer (*.GBL)|*.GBL;*.gbl|" );
filetypes += _( "Bottom solder resist (*.GBS)|*.GBS;*.gbs|" );
filetypes += _( "Top solder resist (*.GTS)|*.GTS;*.gts|" );
filetypes += _( "Bottom overlay (*.GBO)|*.GBO;*.gbo|" );
filetypes += _( "Top overlay (*.GTO)|*.GTO;*.gto|" );
filetypes += _( "Bottom paste (*.GBP)|*.GBP;*.gbp|" );
filetypes += _( "Top paste (*.GTP)|*.GTP;*.gtp|" );
filetypes += _( "Keep-out layer (*.GKO)|*.GKO;*.gko|" );
filetypes += _( "Mechanical layers (*.GMx)|*.GM1;*.gm1;*.GM2;*.gm2;*.GM3;*.gm3|" );
filetypes += _( "Top Pad Master (*.GPT)|*.GPT;*.gpt|" );
filetypes += _( "Bottom Pad Master (*.GPB)|*.GPB;*.gpb|" );
/* All filetypes */
filetypes += AllFilesWildcard;
/* Use the current working directory if the file name path does not exist. */
wxString current_path = wxGetCwd();
if( filename.DirExists() )
current_path = filename.GetPath();
wxFileDialog dlg( this,
_( "Open Gerber File" ),
current_path,
filename.GetFullName(),
filetypes,
wxFD_OPEN | wxFD_FILE_MUST_EXIST );
if( dlg.ShowModal() == wxID_CANCEL )
return false;
filename = dlg.GetPath();
}
GetScreen()->m_FileName = filename.GetFullPath();
wxSetWorkingDirectory( filename.GetPath() );
filename.SetExt( g_PenFilenameExt );
if( Read_GERBER_File( GetScreen()->m_FileName, filename.GetFullPath() ) )
SetLastProject( GetScreen()->m_FileName );
Zoom_Automatique( false );
GetScreen()->SetRefreshReq();
g_SaveTime = time( NULL );
return true;
}
/*
* Read a DCode file (not used with RX274X files , just with RS274D old files).
* Note: there is no standard for DCode file.
* Just read a file format created by early versions of Pcbnew.
* Returns:
* 0 if file not read (cancellation of order ...)
* 1 if OK
*/
static void LoadDCodeFile( WinEDA_GerberFrame* frame,
const wxString& FullFileName )
{
wxString wildcard;
wxFileName fn = FullFileName;
ActiveScreen = frame->GetScreen();
if( !fn.IsOk() )
{
wildcard.Printf( _( "Gerber DCODE files (%s)|*.%s" ),
GetChars( g_PenFilenameExt ),
GetChars( g_PenFilenameExt ) );
wildcard += AllFilesWildcard;
fn = frame->GetScreen()->m_FileName;
fn.SetExt( g_PenFilenameExt );
wxFileDialog dlg( (wxWindow*) frame, _( "Load GERBER DCODE File" ),
fn.GetPath(), fn.GetFullName(), wildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST );
if( dlg.ShowModal() == wxID_CANCEL )
return;
fn = dlg.GetPath();
}
frame->Read_D_Code_File( fn.GetFullPath() );
frame->CopyDCodesSizeToItems();
frame->GetScreen()->SetRefreshReq();
}
/* Save the file in ASCII PCB.
*/
bool WinEDA_GerberFrame::SaveGerberFile( const wxString& FullFileName )
{
wxString wildcard;
wxFileName fn = FullFileName;
if( !fn.IsOk() )
{
fn = GetScreen()->m_FileName;
wildcard.Printf( _( "Gerber DCODE files (%s)|*.%s" ),
GetChars( g_PenFilenameExt ),
GetChars( g_PenFilenameExt ) );
wxFileDialog dlg( this, _( "Save Gerber File" ), fn.GetPath(),
fn.GetFullName(), wildcard,
wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
if( dlg.ShowModal() == wxID_CANCEL )
return false;
fn = dlg.GetPath();
}
GetScreen()->m_FileName = fn.GetFullPath();
// TODO
return true;
}