kicad/pcbnew/drc/drc_test_provider_library_p...

800 lines
30 KiB
C++

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2021-2023 KiCad Developers.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <kiway.h>
#include <macros.h>
#include <netlist_reader/pcb_netlist.h>
#include <fp_lib_table.h>
#include <board.h>
#include <pcb_shape.h>
#include <zone.h>
#include <footprint.h>
#include <pad.h>
#include <drc/drc_engine.h>
#include <drc/drc_item.h>
#include <drc/drc_test_provider.h>
/*
Library parity test.
Errors generated:
- DRCE_LIB_FOOTPRINT_ISSUES
- DRCE_LIB_FOOTPRINT_MISMATCH
*/
class DRC_TEST_PROVIDER_LIBRARY_PARITY : public DRC_TEST_PROVIDER
{
public:
DRC_TEST_PROVIDER_LIBRARY_PARITY()
{
m_isRuleDriven = false;
}
virtual ~DRC_TEST_PROVIDER_LIBRARY_PARITY()
{
}
virtual bool Run() override;
virtual const wxString GetName() const override
{
return wxT( "library_parity" );
};
virtual const wxString GetDescription() const override
{
return wxT( "Performs board footprint vs library integity checks" );
}
};
//
// The TEST*() macros have two modes:
// In "Report" mode (aReporter != nullptr) all properties are checked and reported on.
// In "DRC" mode (aReporter == nulltpr) properties are only checked until a difference is found.
//
#define TEST( a, b, msg ) \
do { \
if( a != b ) \
{ \
diff = true; \
\
if( aReporter && wxString( msg ).length() ) \
aReporter->Report( msg ); \
} \
\
if( diff && !aReporter ) \
return diff; \
} while (0)
#define EPSILON 0.000001
#define TEST_D( a, b, msg ) \
do { \
if( abs( a - b ) > EPSILON ) \
{ \
diff = true; \
\
if( aReporter && wxString( msg ).length() ) \
aReporter->Report( msg ); \
} \
\
if( diff && !aReporter ) \
return diff; \
} while (0)
#define TEST_V3D( a, b, msg ) \
do { \
if( abs( a.x - b.x ) > EPSILON \
|| abs( a.y - b.y ) > EPSILON \
|| abs( a.z - b.z ) > EPSILON ) \
{ \
diff = true; \
\
if( aReporter && wxString( msg ).length() ) \
aReporter->Report( msg ); \
} \
\
if( diff && !aReporter ) \
return diff; \
} while (0)
#define ITEM_DESC( item ) ( item )->GetItemDescription( &g_unitsProvider )
UNITS_PROVIDER g_unitsProvider( pcbIUScale, EDA_UNITS::MILLIMETRES );
bool primitiveNeedsUpdate( const std::shared_ptr<PCB_SHAPE>& a,
const std::shared_ptr<PCB_SHAPE>& b )
{
REPORTER* aReporter = nullptr;
bool diff = false;
TEST( a->GetShape(), b->GetShape(), "" );
switch( a->GetShape() )
{
case SHAPE_T::SEGMENT:
case SHAPE_T::RECTANGLE:
case SHAPE_T::CIRCLE:
TEST( a->GetStart(), b->GetStart(), "" );
TEST( a->GetEnd(), b->GetEnd(), "" );
break;
case SHAPE_T::ARC:
TEST( a->GetStart(), b->GetStart(), "" );
TEST( a->GetEnd(), b->GetEnd(), "" );
TEST( a->GetCenter(), b->GetCenter(), "" );
TEST_D( a->GetArcAngle().AsDegrees(), b->GetArcAngle().AsDegrees(), "" );
break;
case SHAPE_T::BEZIER:
TEST( a->GetStart(), b->GetStart(), "" );
TEST( a->GetEnd(), b->GetEnd(), "" );
TEST( a->GetBezierC1(), b->GetBezierC1(), "" );
TEST( a->GetBezierC2(), b->GetBezierC2(), "" );
break;
case SHAPE_T::POLY:
TEST( a->GetPolyShape().TotalVertices(), b->GetPolyShape().TotalVertices(), "" );
for( int ii = 0; ii < a->GetPolyShape().TotalVertices(); ++ii )
TEST( a->GetPolyShape().CVertex( ii ), b->GetPolyShape().CVertex( ii ), "" );
break;
default:
UNIMPLEMENTED_FOR( a->SHAPE_T_asString() );
}
TEST( a->GetStroke(), b->GetStroke(), "" );
TEST( a->IsFilled(), b->IsFilled(), "" );
return diff;
}
bool padNeedsUpdate( const PAD* a, const PAD* b )
{
REPORTER* aReporter = nullptr;
bool diff = false;
TEST( a->GetPadToDieLength(), b->GetPadToDieLength(), "" );
TEST( a->GetFPRelativePosition(), b->GetFPRelativePosition(), "" );
TEST( a->GetNumber(), b->GetNumber(), "" );
// These are assigned from the schematic and not from the library
// TEST( a->GetPinFunction(), b->GetPinFunction() );
// TEST( a->GetPinType(), b->GetPinType() );
TEST( a->GetRemoveUnconnected(), b->GetRemoveUnconnected(), "" );
// NB: KeepTopBottom is undefined if RemoveUnconnected is NOT set.
if( a->GetRemoveUnconnected() )
TEST( a->GetKeepTopBottom(), b->GetKeepTopBottom(), "" );
TEST( a->GetShape(), b->GetShape(), "" );
// Trim layersets to the current board before comparing
LSET enabledLayers = a->GetBoard()->GetEnabledLayers();
LSET aLayers = a->GetLayerSet() & enabledLayers;
LSET bLayers = b->GetLayerSet() & enabledLayers;
TEST( aLayers, bLayers, "" );
TEST( a->GetAttribute(), b->GetAttribute(), "" );
TEST( a->GetProperty(), b->GetProperty(), "" );
// The pad orientation, for historical reasons is the pad rotation + parent rotation.
TEST_D( ( a->GetOrientation() - a->GetParentFootprint()->GetOrientation() ).Normalize().AsDegrees(),
( b->GetOrientation() - b->GetParentFootprint()->GetOrientation() ).Normalize().AsDegrees(),
"" );
TEST( a->GetSize(), b->GetSize(), "" );
TEST( a->GetDelta(), b->GetDelta(), "" );
TEST( a->GetRoundRectCornerRadius(), b->GetRoundRectCornerRadius(), "" );
TEST_D( a->GetRoundRectRadiusRatio(), b->GetRoundRectRadiusRatio(), "" );
TEST_D( a->GetChamferRectRatio(), b->GetChamferRectRatio(), "" );
TEST( a->GetChamferPositions(), b->GetChamferPositions(), "" );
TEST( a->GetOffset(), b->GetOffset(), "" );
TEST( a->GetDrillShape(), b->GetDrillShape(), "" );
TEST( a->GetDrillSize(), b->GetDrillSize(), "" );
// Clearance and zone connection overrides are as likely to be set at the board level as in
// the library.
//
// If we ignore them and someone *does* change one of them in the library, then stale
// footprints won't be caught.
//
// On the other hand, if we report them then boards that override at the board level are
// going to be VERY noisy.
#if 0
if( padHasOverrides( a, b )
return true;
#endif
TEST( a->GetPrimitives().size(), b->GetPrimitives().size(), "" );
for( size_t ii = 0; ii < a->GetPrimitives().size(); ++ii )
{
if( primitiveNeedsUpdate( a->GetPrimitives()[ii], b->GetPrimitives()[ii] ) )
return true;
}
return diff;
}
bool padHasOverrides( const PAD* a, const PAD* b )
{
REPORTER* aReporter = nullptr;
bool diff = false;
TEST( a->GetLocalClearance(), b->GetLocalClearance(), "" );
TEST( a->GetLocalSolderMaskMargin(), b->GetLocalSolderMaskMargin(), "" );
TEST( a->GetLocalSolderPasteMargin(), b->GetLocalSolderPasteMargin(), "" );
TEST_D( a->GetLocalSolderPasteMarginRatio(), b->GetLocalSolderPasteMarginRatio(), "" );
TEST( a->GetZoneConnection(), b->GetZoneConnection(), "" );
TEST( a->GetThermalGap(), b->GetThermalGap(), "" );
TEST( a->GetThermalSpokeWidth(), b->GetThermalSpokeWidth(), "" );
TEST_D( a->GetThermalSpokeAngle().AsDegrees(), b->GetThermalSpokeAngle().AsDegrees(), "" );
TEST( a->GetCustomShapeInZoneOpt(), b->GetCustomShapeInZoneOpt(), "" );
return diff;
}
bool shapeNeedsUpdate( const PCB_SHAPE* a, const PCB_SHAPE* b )
{
REPORTER* aReporter = nullptr;
bool diff = false;
TEST( a->GetShape(), b->GetShape(), "" );
switch( a->GetShape() )
{
case SHAPE_T::RECTANGLE:
{
BOX2I aRect( a->GetStart(), a->GetEnd() - a->GetStart() );
BOX2I bRect( b->GetStart(), b->GetEnd() - b->GetStart() );
aRect.Normalize();
bRect.Normalize();
TEST( aRect.GetOrigin(), bRect.GetOrigin(), "" );
TEST( aRect.GetEnd(), bRect.GetEnd(), "" );
break;
}
case SHAPE_T::SEGMENT:
case SHAPE_T::CIRCLE:
TEST( a->GetStart(), b->GetStart(), "" );
TEST( a->GetEnd(), b->GetEnd(), "" );
break;
case SHAPE_T::ARC:
TEST( a->GetStart(), b->GetStart(), "" );
TEST( a->GetEnd(), b->GetEnd(), "" );
// Arc center is calculated and so may have round-off errors when parents are
// differentially rotated.
if( ( a->GetCenter() - b->GetCenter() ).EuclideanNorm() > pcbIUScale.mmToIU( 0.0001 ) )
return true;
break;
case SHAPE_T::BEZIER:
TEST( a->GetStart(), b->GetStart(), "" );
TEST( a->GetEnd(), b->GetEnd(), "" );
TEST( a->GetBezierC1(), b->GetBezierC1(), "" );
TEST( a->GetBezierC2(), b->GetBezierC2(), "" );
break;
case SHAPE_T::POLY:
TEST( a->GetPolyShape().TotalVertices(), b->GetPolyShape().TotalVertices(), "" );
for( int ii = 0; ii < a->GetPolyShape().TotalVertices(); ++ii )
TEST( a->GetPolyShape().CVertex( ii ), b->GetPolyShape().CVertex( ii ), "" );
break;
default:
UNIMPLEMENTED_FOR( a->SHAPE_T_asString() );
}
TEST( a->GetStroke(), b->GetStroke(), "" );
TEST( a->IsFilled(), b->IsFilled(), "" );
TEST( a->GetLayer(), b->GetLayer(), "" );
return diff;
}
bool textNeedsUpdate( const PCB_TEXT* a, const PCB_TEXT* b )
{
REPORTER* aReporter = nullptr;
bool diff = false;
TEST( a->GetLayer(), b->GetLayer(), "" );
TEST( a->IsKeepUpright(), b->IsKeepUpright(), "" );
TEST( a->GetText(), b->GetText(), "" );
TEST( a->GetTextThickness(), b->GetTextThickness(), "" );
TEST( a->GetTextAngle(), b->GetTextAngle(), "" );
TEST( a->IsItalic(), b->IsItalic(), "" );
TEST( a->IsBold(), b->IsBold(), "" );
TEST( a->IsVisible(), b->IsVisible(), "" );
TEST( a->IsMirrored(), b->IsMirrored(), "" );
TEST( a->GetHorizJustify(), b->GetHorizJustify(), "" );
TEST( a->GetVertJustify(), b->GetVertJustify(), "" );
TEST( a->GetTextSize(), b->GetTextSize(), "" );
TEST( a->GetFPRelativePosition(), b->GetFPRelativePosition(), "" );
return diff;
}
bool zoneNeedsUpdate( const ZONE* a, const ZONE* b, REPORTER* aReporter )
{
bool diff = false;
TEST( a->GetCornerSmoothingType(), b->GetCornerSmoothingType(),
wxString::Format( _( "%s corner smoothing setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetCornerRadius(), b->GetCornerRadius(),
wxString::Format( _( "%s corner smoothing radius differs." ), ITEM_DESC( a ) ) );
TEST( a->GetZoneName(), b->GetZoneName(),
wxString::Format( _( "%s name differs." ), ITEM_DESC( a ) ) );
TEST( a->GetAssignedPriority(), b->GetAssignedPriority(),
wxString::Format( _( "%s priority differs." ), ITEM_DESC( a ) ) );
TEST( a->GetIsRuleArea(), b->GetIsRuleArea(),
wxString::Format( _( "%s keep-out property differs." ), ITEM_DESC( a ) ) );
TEST( a->GetDoNotAllowCopperPour(), b->GetDoNotAllowCopperPour(),
wxString::Format( _( "%s keep out copper fill setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetDoNotAllowFootprints(), b->GetDoNotAllowFootprints(),
wxString::Format( _( "%s keep out footprints setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetDoNotAllowPads(), b->GetDoNotAllowPads(),
wxString::Format( _( "%s keep out pads setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetDoNotAllowTracks(), b->GetDoNotAllowTracks(),
wxString::Format( _( "%s keep out tracks setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetDoNotAllowVias(), b->GetDoNotAllowVias(),
wxString::Format( _( "%s keep out vias setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetLayerSet(), b->GetLayerSet(),
wxString::Format( _( "%s layers differ." ), ITEM_DESC( a ) ) );
TEST( a->GetPadConnection(), b->GetPadConnection(),
wxString::Format( _( "%s pad connection property differs." ), ITEM_DESC( a ) ) );
TEST( a->GetLocalClearance(), b->GetLocalClearance(),
wxString::Format( _( "%s local clearance differs." ), ITEM_DESC( a ) ) );
TEST( a->GetThermalReliefGap(), b->GetThermalReliefGap(),
wxString::Format( _( "%s thermal relief gap differs." ), ITEM_DESC( a ) ) );
TEST( a->GetThermalReliefSpokeWidth(), b->GetThermalReliefSpokeWidth(),
wxString::Format( _( "%s thermal relief spoke width differs." ), ITEM_DESC( a ) ) );
TEST( a->GetMinThickness(), b->GetMinThickness(),
wxString::Format( _( "%s min thickness differs." ), ITEM_DESC( a ) ) );
TEST( a->GetIslandRemovalMode(), b->GetIslandRemovalMode(),
wxString::Format( _( "%s remove islands setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetMinIslandArea(), b->GetMinIslandArea(),
wxString::Format( _( "%s minimum island size setting differs." ), ITEM_DESC( a ) ) );
TEST( a->GetFillMode(), b->GetFillMode(),
wxString::Format( _( "%s fill type differs." ), ITEM_DESC( a ) ) );
TEST( a->GetHatchThickness(), b->GetHatchThickness(),
wxString::Format( _( "%s hatch width differs." ), ITEM_DESC( a ) ) );
TEST( a->GetHatchGap(), b->GetHatchGap(),
wxString::Format( _( "%s hatch gap differs." ), ITEM_DESC( a ) ) );
TEST_D( a->GetHatchOrientation().AsDegrees(), b->GetHatchOrientation().AsDegrees(),
wxString::Format( _( "%s hatch orientation differs." ), ITEM_DESC( a ) ) );
TEST( a->GetHatchSmoothingLevel(), b->GetHatchSmoothingLevel(),
wxString::Format( _( "%s hatch smoothing level differs." ), ITEM_DESC( a ) ) );
TEST( a->GetHatchSmoothingValue(), b->GetHatchSmoothingValue(),
wxString::Format( _( "%s hatch smoothing amount differs." ), ITEM_DESC( a ) ) );
TEST( a->GetHatchHoleMinArea(), b->GetHatchHoleMinArea(),
wxString::Format( _( "%s minimum hatch hole setting differs." ), ITEM_DESC( a ) ) );
// This is just a display property
// TEST( a->GetHatchBorderAlgorithm(), b->GetHatchBorderAlgorithm() );
TEST( a->Outline()->TotalVertices(), b->Outline()->TotalVertices(),
wxString::Format( _( "%s outline corner count differs." ), ITEM_DESC( a ) ) );
bool cornersDiffer = false;
for( int ii = 0; ii < a->Outline()->TotalVertices(); ++ii )
{
if( a->Outline()->CVertex( ii ) != b->Outline()->CVertex( ii ) )
{
diff = true;
cornersDiffer = true;
break;
}
}
if( cornersDiffer && aReporter )
aReporter->Report( wxString::Format( _( "%s corners differ." ), ITEM_DESC( a ) ) );
return diff;
}
bool modelNeedsUpdate( const FP_3DMODEL& a, const FP_3DMODEL& b, REPORTER* aReporter )
{
bool diff = false;
TEST_V3D( a.m_Scale, b.m_Scale, _( "3D model scale doesn't match: " ) + a.m_Filename );
TEST_V3D( a.m_Rotation, b.m_Rotation, _( "3D model rotation doesn't match: " ) + a.m_Filename );
TEST_V3D( a.m_Offset, b.m_Offset, _( "3D model offset doesn't match: " ) + a.m_Filename );
TEST( a.m_Opacity, b.m_Opacity, _( "3D model opacity doesn't match: " ) + a.m_Filename );
TEST( a.m_Filename, b.m_Filename, _( "3D model doesn't match: " ) + a.m_Filename );
TEST( a.m_Show, b.m_Show, _( "3D model visibility doesn't match: " ) + a.m_Filename );
return diff;
}
bool FOOTPRINT::FootprintNeedsUpdate( const FOOTPRINT* aLibFootprint, REPORTER* aReporter )
{
UNITS_PROVIDER unitsProvider( pcbIUScale, EDA_UNITS::MILLIMETRES );
wxASSERT( aLibFootprint );
bool diff = false;
// To avoid issues when comparing the footprint on board and the footprint in library
// use a footprint not flipped, not rotated and at position 0,0.
// Otherwise one can see differences when comparing coordinates of some items
if( IsFlipped() || GetPosition() != VECTOR2I( 0, 0 ) || GetOrientation() != ANGLE_0 )
{
std::unique_ptr<FOOTPRINT> temp( static_cast<FOOTPRINT*>( Clone() ) );
temp->SetParentGroup( nullptr );
if( IsFlipped() )
temp->Flip( {0,0}, false );
if( GetPosition() != VECTOR2I( 0, 0 ) )
temp->SetPosition( { 0, 0 } );
if( GetOrientation() != ANGLE_0 )
temp->SetOrientation( ANGLE_0 );
for( BOARD_ITEM* item : temp->GraphicalItems() )
{
if( item->Type() == PCB_SHAPE_T )
static_cast<PCB_SHAPE*>( item )->NormalizeRect();
}
diff = temp->FootprintNeedsUpdate( aLibFootprint, aReporter );
// This temporary footprint must not have a parent when it goes out of scope because it must
// not trigger the IncrementTimestamp call in ~FOOTPRINT.
temp->SetParent( nullptr );
return diff;
}
TEST( GetLibDescription(), aLibFootprint->GetLibDescription(),
_( "Footprint descriptions differ." ) );
TEST( GetKeywords(), aLibFootprint->GetKeywords(),
_( "Footprint keywords differ." ) );
#define TEST_ATTR( a, b, attr, msg ) TEST( ( a & attr ), ( b & attr ), msg )
TEST_ATTR( GetAttributes(), aLibFootprint->GetAttributes(), (FP_THROUGH_HOLE | FP_SMD),
_( "Footprint types differ." ) );
TEST_ATTR( GetAttributes(), aLibFootprint->GetAttributes(), FP_ALLOW_SOLDERMASK_BRIDGES,
_( "Allow bridged solder mask apertures between pads settings differ." ) );
TEST_ATTR( GetAttributes(), aLibFootprint->GetAttributes(), FP_ALLOW_MISSING_COURTYARD,
_( "Exempt from courtyard requirement settings differ." ) );
// Clearance and zone connection overrides are as likely to be set at the board level as in
// the library.
//
// If we ignore them and someone *does* change one of them in the library, then stale
// footprints won't be caught.
//
// On the other hand, if we report them then boards that override at the board level are
// going to be VERY noisy.
if( aReporter )
{
TEST( GetLocalClearance(), aLibFootprint->GetLocalClearance(),
_( "Pad clearance overridden." ) );
TEST( GetLocalSolderMaskMargin(), aLibFootprint->GetLocalSolderMaskMargin(),
_( "Solder mask expansion overridden." ) );
TEST( GetLocalSolderPasteMargin(), aLibFootprint->GetLocalSolderPasteMargin(),
_( "Solder paste absolute clearance overridden." ) );
TEST_D( GetLocalSolderPasteMarginRatio(), aLibFootprint->GetLocalSolderPasteMarginRatio(),
_( "Solder paste relative clearance overridden." ) );
TEST( GetZoneConnection(), aLibFootprint->GetZoneConnection(),
_( "Zone connection overridden." ) );
}
TEST( GetNetTiePadGroups().size(), aLibFootprint->GetNetTiePadGroups().size(),
_( "Net tie pad groups differ." ) );
for( size_t ii = 0; ii < GetNetTiePadGroups().size(); ++ii )
{
TEST( GetNetTiePadGroups()[ii], aLibFootprint->GetNetTiePadGroups()[ii],
_( "Net tie pad groups differ." ) );
}
#define REPORT( msg ) { if( aReporter ) aReporter->Report( msg ); }
#define CHECKPOINT { if( diff && !aReporter ) return diff; }
// Text items are really problematic. We don't want to test the reference, but after that
// it gets messy.
//
// What about the value? Depends on whether or not it's a singleton part.
//
// And what about other texts? They might be added only to instances on the board, or even
// changed for instances on the board. Or they might want to be tested for equality.
//
// Currently we punt and ignore all the text items.
// Drawings and pads are also somewhat problematic as there's no guarantee that they'll be
// in the same order in the two footprints. Rather than building some sophisticated hashing
// algorithm we use the footprint sorting functions to attempt to sort them in the same
// order.
std::set<BOARD_ITEM*, FOOTPRINT::cmp_drawings> aShapes;
std::copy_if( GraphicalItems().begin(), GraphicalItems().end(),
std::inserter( aShapes, aShapes.begin() ),
[]( BOARD_ITEM* item )
{
return item->Type() == PCB_SHAPE_T;
} );
std::set<BOARD_ITEM*, FOOTPRINT::cmp_drawings> bShapes;
std::copy_if( aLibFootprint->GraphicalItems().begin(), aLibFootprint->GraphicalItems().end(),
std::inserter( bShapes, bShapes.begin() ),
[]( BOARD_ITEM* item )
{
return item->Type() == PCB_SHAPE_T;
} );
if( aShapes.size() != bShapes.size() )
{
diff = true;
REPORT( _( "Graphic item count differs." ) );
}
else
{
for( auto aIt = aShapes.begin(), bIt = bShapes.begin(); aIt != aShapes.end(); aIt++, bIt++ )
{
if( ( *aIt )->Type() == PCB_SHAPE_T )
{
if( shapeNeedsUpdate( static_cast<PCB_SHAPE*>( *aIt ), static_cast<PCB_SHAPE*>( *bIt ) ) )
{
diff = true;
REPORT( wxString::Format( _( "%s differs." ), ITEM_DESC( *aIt ) ) );
}
}
}
}
CHECKPOINT;
std::set<PAD*, FOOTPRINT::cmp_pads> aPads( Pads().begin(), Pads().end() );
std::set<PAD*, FOOTPRINT::cmp_pads> bPads( aLibFootprint->Pads().begin(), aLibFootprint->Pads().end() );
if( aPads.size() != bPads.size() )
{
diff = true;
REPORT( _( "Pad count differs." ) );
}
else
{
for( auto aIt = aPads.begin(), bIt = bPads.begin(); aIt != aPads.end(); aIt++, bIt++ )
{
if( padNeedsUpdate( *aIt, *bIt ) )
{
diff = true;
REPORT( wxString::Format( _( "Pad %s differs." ), (*aIt)->GetNumber() ) );
}
else if( aReporter && padHasOverrides( *aIt, *bIt ) )
{
diff = true;
REPORT( wxString::Format( _( "Pad %s has overrides." ), (*aIt)->GetNumber() ) );
}
}
}
CHECKPOINT;
if( Models().size() != aLibFootprint->Models().size() )
{
diff = true;
REPORT( _( "3D model count differs." ) );
}
else
{
for( size_t ii = 0; ii < Models().size(); ++ii )
diff |= modelNeedsUpdate( Models()[ii], aLibFootprint->Models()[ii], aReporter );
}
CHECKPOINT;
// Rotate/position a copy of libFootprint so that zones sort the same
std::unique_ptr<FOOTPRINT> libCopy( static_cast<FOOTPRINT*>( aLibFootprint->Clone() ) );
libCopy->SetOrientation( GetOrientation() );
libCopy->Move( GetPosition() );
std::set<ZONE*, FOOTPRINT::cmp_zones> aZones( Zones().begin(), Zones().end() );
std::set<ZONE*, FOOTPRINT::cmp_zones> bZones( libCopy->Zones().begin(), libCopy->Zones().end() );
if( aZones.size() != bZones.size() )
{
diff = true;
REPORT( _( "Rule area count differs." ) );
}
else
{
for( auto aIt = aZones.begin(), bIt = bZones.begin(); aIt != aZones.end(); aIt++, bIt++ )
diff |= zoneNeedsUpdate( *aIt, *bIt, aReporter );
}
return diff;
}
bool DRC_TEST_PROVIDER_LIBRARY_PARITY::Run()
{
BOARD* board = m_drcEngine->GetBoard();
PROJECT* project = board->GetProject();
if( !project )
{
reportAux( _( "No project loaded, skipping library parity tests." ) );
return true; // Continue with other tests
}
if( !reportPhase( _( "Loading footprint library table..." ) ) )
return false; // DRC cancelled
std::map<LIB_ID, std::shared_ptr<FOOTPRINT>> libFootprintCache;
FP_LIB_TABLE* libTable = project->PcbFootprintLibs();
wxString msg;
int ii = 0;
const int progressDelta = 250;
if( !reportPhase( _( "Checking board footprints against library..." ) ) )
return false;
for( FOOTPRINT* footprint : board->Footprints() )
{
if( m_drcEngine->IsErrorLimitExceeded( DRCE_LIB_FOOTPRINT_ISSUES )
&& m_drcEngine->IsErrorLimitExceeded( DRCE_LIB_FOOTPRINT_MISMATCH ) )
{
return true; // Continue with other tests
}
if( !reportProgress( ii++, (int) board->Footprints().size(), progressDelta ) )
return false; // DRC cancelled
LIB_ID fpID = footprint->GetFPID();
wxString libName = fpID.GetLibNickname();
wxString fpName = fpID.GetLibItemName();
const LIB_TABLE_ROW* libTableRow = nullptr;
try
{
libTableRow = libTable->FindRow( libName );
}
catch( const IO_ERROR& )
{
}
if( !libTableRow )
{
if( !m_drcEngine->IsErrorLimitExceeded( DRCE_LIB_FOOTPRINT_ISSUES ) )
{
std::shared_ptr<DRC_ITEM> drcItem = DRC_ITEM::Create( DRCE_LIB_FOOTPRINT_ISSUES );
msg.Printf( _( "The current configuration does not include the library '%s'." ),
libName );
drcItem->SetErrorMessage( msg );
drcItem->SetItems( footprint );
reportViolation( drcItem, footprint->GetCenter(), UNDEFINED_LAYER );
}
continue;
}
else if( !libTable->HasLibrary( libName, true ) )
{
if( !m_drcEngine->IsErrorLimitExceeded( DRCE_LIB_FOOTPRINT_ISSUES ) )
{
std::shared_ptr<DRC_ITEM> drcItem = DRC_ITEM::Create( DRCE_LIB_FOOTPRINT_ISSUES );
msg.Printf( _( "The library '%s' is not enabled in the current configuration." ),
libName );
drcItem->SetErrorMessage( msg );
drcItem->SetItems( footprint );
reportViolation( drcItem, footprint->GetCenter(), UNDEFINED_LAYER );
}
continue;
}
auto cacheIt = libFootprintCache.find( fpID );
std::shared_ptr<FOOTPRINT> libFootprint;
if( cacheIt != libFootprintCache.end() )
{
libFootprint = cacheIt->second;
}
else
{
try
{
libFootprint.reset( libTable->FootprintLoad( libName, fpName, true ) );
if( libFootprint )
libFootprintCache[ fpID ] = libFootprint;
}
catch( const IO_ERROR& )
{
}
}
if( !libFootprint )
{
if( !m_drcEngine->IsErrorLimitExceeded( DRCE_LIB_FOOTPRINT_ISSUES ) )
{
std::shared_ptr<DRC_ITEM> drcItem = DRC_ITEM::Create( DRCE_LIB_FOOTPRINT_ISSUES );
msg.Printf( _( "Footprint '%s' not found in library '%s'." ),
fpName,
libName );
drcItem->SetErrorMessage( msg );
drcItem->SetItems( footprint );
reportViolation( drcItem, footprint->GetCenter(), UNDEFINED_LAYER );
}
}
else if( footprint->FootprintNeedsUpdate( libFootprint.get() ) )
{
if( !m_drcEngine->IsErrorLimitExceeded( DRCE_LIB_FOOTPRINT_MISMATCH ) )
{
std::shared_ptr<DRC_ITEM> drcItem = DRC_ITEM::Create( DRCE_LIB_FOOTPRINT_MISMATCH );
msg.Printf( _( "Footprint '%s' does not match copy in library '%s'." ),
fpName,
libName );
drcItem->SetErrorMessage( msg );
drcItem->SetItems( footprint );
reportViolation( drcItem, footprint->GetCenter(), UNDEFINED_LAYER );
}
}
}
return true;
}
namespace detail
{
static DRC_REGISTER_TEST_PROVIDER<DRC_TEST_PROVIDER_LIBRARY_PARITY> dummy;
}