kicad/pcbnew/solve.cpp

1292 lines
40 KiB
C++

/*************/
/* solve.cpp */
/*************/
#include "fctsys.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "class_board_design_settings.h"
#include "autorout.h"
#include "protos.h"
#include "cell.h"
static int Autoroute_One_Track( PCB_EDIT_FRAME* pcbframe,
wxDC* DC,
int two_sides,
int row_source,
int col_source,
int row_target,
int col_target,
RATSNEST_ITEM* pt_chevelu );
static int Retrace( PCB_EDIT_FRAME* pcbframe,
wxDC* DC,
int,
int,
int,
int,
int,
int net_code );
static void OrCell_Trace( BOARD* pcb,
int col,
int row,
int side,
int orient,
int current_net_code );
static void Place_Piste_en_Buffer( PCB_EDIT_FRAME* pcbframe, wxDC* DC );
static int segm_oX, segm_oY;
static int segm_fX, segm_fY; /* Origin and position of the current
* trace segment. */
static RATSNEST_ITEM* pt_cur_ch;
static int Ncurrent; /* measures of progress */
static int s_Clearance; // Clearance value used in autorouter
#define NOSUCCESS 0
#define STOP_FROM_ESC -1
#define ERR_MEMORY -2
#define SUCCESS 1
#define TRIVIAL_SUCCESS 2
/*
** visit neighboring cells like this (where [9] is on the other side):
**
** +---+---+---+
** | 1 | 2 | 3 |
** +---+---+---+
** | 4 |[9]| 5 |
** +---+---+---+
** | 6 | 7 | 8 |
** +---+---+---+
*/
/* for visiting neighbors on the same side: increments/decrements coord of
* [] [0] = row [] (1] = col was added to the coord of the midpoint for
* Get the coord of the 8 neighboring points.
*/
static int delta[8][2] =
{
{ 1, -1 }, /* northwest */
{ 1, 0 }, /* north */
{ 1, 1 }, /* northeast */
{ 0, -1 }, /* west */
{ 0, 1 }, /* east */
{ -1, -1 }, /* southwest */
{ -1, 0 }, /* south */
{ -1, 1 } /* southeast */
};
static int ndir[8] =
{
/* for building paths back to source */
FROM_SOUTHEAST, FROM_SOUTH, FROM_SOUTHWEST,
FROM_EAST, FROM_WEST,
FROM_NORTHEAST, FROM_NORTH, FROM_NORTHWEST
};
/* blocking masks for neighboring cells */
#define BLOCK_NORTHEAST ( DIAG_NEtoSW | BENT_StoNE | BENT_WtoNE \
| ANGLE_NEtoSE | ANGLE_NWtoNE \
| SHARP_NtoNE | SHARP_EtoNE | HOLE )
#define BLOCK_SOUTHEAST ( DIAG_SEtoNW | BENT_NtoSE | BENT_WtoSE \
| ANGLE_NEtoSE | ANGLE_SEtoSW \
| SHARP_EtoSE | SHARP_StoSE | HOLE )
#define BLOCK_SOUTHWEST ( DIAG_NEtoSW | BENT_NtoSW | BENT_EtoSW \
| ANGLE_SEtoSW | ANGLE_SWtoNW \
| SHARP_StoSW | SHARP_WtoSW | HOLE )
#define BLOCK_NORTHWEST ( DIAG_SEtoNW | BENT_EtoNW | BENT_StoNW \
| ANGLE_SWtoNW | ANGLE_NWtoNE \
| SHARP_WtoNW | SHARP_NtoNW | HOLE )
#define BLOCK_NORTH ( LINE_VERTICAL | BENT_NtoSE | BENT_NtoSW \
| BENT_EtoNW | BENT_WtoNE \
| BENT_StoNE | BENT_StoNW \
| CORNER_NORTHEAST | CORNER_NORTHWEST \
| ANGLE_NEtoSE | ANGLE_SWtoNW | ANGLE_NWtoNE \
| DIAG_NEtoSW | DIAG_SEtoNW \
| SHARP_NtoNE | SHARP_NtoNW \
| SHARP_EtoNE | SHARP_WtoNW | HOLE )
#define BLOCK_EAST ( LINE_HORIZONTAL | BENT_EtoSW | BENT_EtoNW \
| BENT_NtoSE | BENT_StoNE \
| BENT_WtoNE | BENT_WtoSE \
| CORNER_NORTHEAST | CORNER_SOUTHEAST \
| ANGLE_NEtoSE | ANGLE_SEtoSW | ANGLE_NWtoNE \
| DIAG_NEtoSW | DIAG_SEtoNW \
| SHARP_EtoNE | SHARP_EtoSE \
| SHARP_NtoNE | SHARP_StoSE | HOLE )
#define BLOCK_SOUTH ( LINE_VERTICAL | BENT_StoNE | BENT_StoNW \
| BENT_EtoSW | BENT_WtoSE \
| BENT_NtoSE | BENT_NtoSW \
| CORNER_SOUTHEAST | CORNER_SOUTHWEST \
| ANGLE_NEtoSE | ANGLE_SWtoNW | ANGLE_SEtoSW \
| DIAG_NEtoSW | DIAG_SEtoNW \
| SHARP_StoSE | SHARP_StoSW \
| SHARP_EtoSE | SHARP_WtoSW | HOLE )
#define BLOCK_WEST ( LINE_HORIZONTAL | BENT_WtoNE | BENT_WtoSE \
| BENT_NtoSW | BENT_StoNW \
| BENT_EtoSW | BENT_EtoNW \
| CORNER_SOUTHWEST | CORNER_NORTHWEST \
| ANGLE_SWtoNW | ANGLE_SEtoSW | ANGLE_NWtoNE \
| DIAG_NEtoSW | DIAG_SEtoNW \
| SHARP_WtoSW | SHARP_WtoNW \
| SHARP_NtoNW | SHARP_StoSW | HOLE )
struct block
{
int r1, c1;
long b1;
int r2, c2;
long b2;
};
/* blocking masks for diagonal traces */
static struct block blocking[8] =
{ {
0, -1,
BLOCK_NORTHEAST,
1, 0,
BLOCK_SOUTHWEST
},
{
0, 0, 0,
0, 0, 0
},
{
1, 0,
BLOCK_SOUTHEAST,
0, 1,
BLOCK_NORTHWEST
},
{
0, 0, 0,
0, 0, 0
},
{
0, 0, 0,
0, 0, 0
},
{
0, -1,
BLOCK_SOUTHEAST,
-1, 0,
BLOCK_NORTHWEST
},
{
0, 0, 0,
0, 0, 0
},
{
-1, 0,
BLOCK_NORTHEAST,
0, 1,
BLOCK_SOUTHWEST
} };
/* mask for hole-related blocking effects */
static struct
{
long trace;
int present;
} selfok2[8] =
{
{ HOLE_NORTHWEST, 0 },
{ HOLE_NORTH, 0 },
{ HOLE_NORTHEAST, 0 },
{ HOLE_WEST, 0 },
{ HOLE_EAST, 0 },
{ HOLE_SOUTHWEST, 0 },
{ HOLE_SOUTH, 0 },
{ HOLE_SOUTHEAST, 0 }
};
static long newmask[8] =
{
/* patterns to mask out in neighbor cells */
0,
CORNER_NORTHWEST | CORNER_NORTHEAST,
0,
CORNER_NORTHWEST | CORNER_SOUTHWEST,
CORNER_NORTHEAST | CORNER_SOUTHEAST,
0,
CORNER_SOUTHWEST | CORNER_SOUTHEAST,
0
};
/* Route all traces
* Return:
* 1 if OK
* -1 if escape (stop being routed) request
* -2 if default memory allocation
*/
int PCB_EDIT_FRAME::Solve( wxDC* DC, int two_sides )
{
int current_net_code;
int row_source, col_source, row_target, col_target;
int success, nbsucces = 0, nbunsucces = 0;
NETINFO_ITEM* net;
bool stop = false;
wxString msg;
DrawPanel->m_AbortRequest = false;
DrawPanel->m_AbortEnable = true;
s_Clearance = GetBoard()->m_NetClasses.GetDefault()->GetClearance();
Ncurrent = 0;
/* go until no more work to do */
GetWork( &row_source, &col_source, &current_net_code,
&row_target, &col_target, &pt_cur_ch ); // First net to route.
for( ; row_source != ILLEGAL; GetWork( &row_source, &col_source,
&current_net_code, &row_target,
&col_target,
&pt_cur_ch ) )
{
/* Test to stop routing ( escape key pressed ) */
wxYield();
if( DrawPanel->m_AbortRequest )
{
if( IsOK( this, _( "Abort routing?" ) ) )
{
success = STOP_FROM_ESC;
stop = true;
break;
}
else
DrawPanel->m_AbortRequest = 0;
}
EraseMsgBox();
Ncurrent++;
net = GetBoard()->FindNet( current_net_code );
if( net )
{
msg.Printf( wxT( "[%8.8s]" ), GetChars( net->GetNetname() ) );
AppendMsgPanel( wxT( "Net route" ), msg, BROWN );
msg.Printf( wxT( "%d / %d" ), Ncurrent, Ntotal );
AppendMsgPanel( wxT( "Activity" ), msg, BROWN );
}
pt_cur_ch = pt_cur_ch;
segm_oX = GetBoard()->m_BoundaryBox.m_Pos.x + (Board.m_GridRouting * col_source);
segm_oY = GetBoard()->m_BoundaryBox.m_Pos.y + (Board.m_GridRouting * row_source);
segm_fX = GetBoard()->m_BoundaryBox.m_Pos.x + (Board.m_GridRouting * col_target);
segm_fY = GetBoard()->m_BoundaryBox.m_Pos.y + (Board.m_GridRouting * row_target);
/* Draw segment. */
GRLine( &DrawPanel->m_ClipBox,
DC,
segm_oX,
segm_oY,
segm_fX,
segm_fY,
0,
WHITE | GR_XOR );
pt_cur_ch->m_PadStart->Draw( DrawPanel, DC, GR_OR | GR_SURBRILL );
pt_cur_ch->m_PadEnd->Draw( DrawPanel, DC, GR_OR | GR_SURBRILL );
success = Autoroute_One_Track( this,
DC,
two_sides,
row_source,
col_source,
row_target,
col_target,
pt_cur_ch );
switch( success )
{
case NOSUCCESS:
pt_cur_ch->m_Status |= CH_UNROUTABLE;
nbunsucces++;
break;
case STOP_FROM_ESC:
stop = true;
break;
case ERR_MEMORY:
stop = true;
break;
default:
nbsucces++;
break;
}
msg.Printf( wxT( "%d" ), nbsucces );
AppendMsgPanel( wxT( "Ok" ), msg, GREEN );
msg.Printf( wxT( "%d" ), nbunsucces );
AppendMsgPanel( wxT( "Fail" ), msg, RED );
msg.Printf( wxT( " %d" ), GetBoard()->m_NbNoconnect );
AppendMsgPanel( wxT( "Not Connectd" ), msg, CYAN );
/* Delete routing from display. */
pt_cur_ch->m_PadStart->Draw( DrawPanel, DC, GR_AND );
pt_cur_ch->m_PadEnd->Draw( DrawPanel, DC, GR_AND );
if( stop )
break;
}
DrawPanel->m_AbortEnable = false;
return SUCCESS;
}
/* Route a trace on the BOARD.
* Parameters:
* 1 side / 2 sides (0 / 1)
* Coord source (row, col)
* Coord destination (row, col)
* Net_code
* Pointer to the ratsnest reference
*
* Returns:
* SUCCESS if routed
* TRIVIAL_SUCCESS if pads are connected by overlay (no track needed)
* If failure NOSUCCESS
* Escape STOP_FROM_ESC if demand
* ERR_MEMORY if memory allocation failed.
*/
static int Autoroute_One_Track( PCB_EDIT_FRAME* pcbframe,
wxDC* DC,
int two_sides,
int row_source,
int col_source,
int row_target,
int col_target,
RATSNEST_ITEM* pt_chevelu )
{
int r, c, side, d, apx_dist, nr, nc;
int result, skip;
int i;
long curcell, newcell, buddy, lastopen, lastclos, lastmove;
int newdist, olddir, _self;
int current_net_code;
int marge;
int pad_masque_layer_s; /* Mask layers belonging to the
*starting pad. */
int pad_masque_layer_e; /* Mask layers belonging to the ending
*pad. */
int masque_layer_TOP = g_TabOneLayerMask[Route_Layer_TOP];
int masque_layer_BOTTOM = g_TabOneLayerMask[Route_Layer_BOTTOM];
int masque_layers; /* Mask two layers for routing. */
int tab_mask[2]; /* Enables the calculation of the mask
* layer being
* tested. (side = TOP or BOTTOM) */
int start_mask_layer = 0;
wxString msg;
wxBusyCursor dummy_cursor; // Set an hourglass cursor while routing a
// track
result = NOSUCCESS;
marge = s_Clearance +
( pcbframe->GetBoard()->GetCurrentTrackWidth() / 2 );
/* clear direction flags */
i = Nrows * Ncols * sizeof(DIR_CELL);
memset( Board.m_DirSide[TOP], FROM_NOWHERE, i );
memset( Board.m_DirSide[BOTTOM], FROM_NOWHERE, i );
lastopen = lastclos = lastmove = 0;
/* Set tab_masque[side] for final test of routing. */
tab_mask[TOP] = masque_layer_TOP;
tab_mask[BOTTOM] = masque_layer_BOTTOM;
/* Set active layers mask. */
masque_layers = masque_layer_TOP | masque_layer_BOTTOM;
pt_cur_ch = pt_chevelu;
current_net_code = pt_chevelu->GetNet();
pad_masque_layer_s = pt_cur_ch->m_PadStart->m_Masque_Layer;
pad_masque_layer_e = pt_cur_ch->m_PadEnd->m_Masque_Layer;
/* First Test if routing possible ie if the pads are accessible
* on the routing layers.
*/
if( ( masque_layers & pad_masque_layer_s ) == 0 )
goto end_of_route;
if( ( masque_layers & pad_masque_layer_e ) == 0 )
goto end_of_route;
/* Then test if routing possible ie if the pads are accessible
* On the routing grid (1 grid point must be in the pad)
*/
{
int cX = ( Board.m_GridRouting * col_source )
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.x;
int cY = ( Board.m_GridRouting * row_source )
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.y;
int dx = pt_cur_ch->m_PadStart->m_Size.x / 2;
int dy = pt_cur_ch->m_PadStart->m_Size.y / 2;
int px = pt_cur_ch->m_PadStart->GetPosition().x;
int py = pt_cur_ch->m_PadStart->GetPosition().y;
if( ( ( pt_cur_ch->m_PadStart->m_Orient / 900 ) & 1 ) != 0 )
EXCHG( dx, dy );
if( ( abs( cX - px ) > dx ) || ( abs( cY - py ) > dy ) )
goto end_of_route;
cX = ( Board.m_GridRouting * col_target )
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.x;
cY = ( Board.m_GridRouting * row_target )
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.y;
dx = pt_cur_ch->m_PadEnd->m_Size.x / 2;
dy = pt_cur_ch->m_PadEnd->m_Size.y / 2;
px = pt_cur_ch->m_PadEnd->GetPosition().x;
py = pt_cur_ch->m_PadEnd->GetPosition().y;
if( ( (pt_cur_ch->m_PadEnd->m_Orient / 900) & 1 ) != 0 )
EXCHG( dx, dy );
if( ( abs( cX - px ) > dx ) || ( abs( cY - py ) > dy ) )
goto end_of_route;
}
/* Test the trivial case: direct connection overlay pads. */
if( ( row_source == row_target ) && ( col_source == col_target )
&& ( pad_masque_layer_e & pad_masque_layer_s &
g_TabAllCopperLayerMask[pcbframe->GetBoard()->GetCopperLayerCount() - 1] ) )
{
result = TRIVIAL_SUCCESS;
goto end_of_route;
}
/* Placing the bit to remove obstacles on 2 pads to a link. */
pcbframe->SetStatusText( wxT( "Gen Cells" ) );
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->m_PadStart,
CURRENT_PAD, marge, WRITE_OR_CELL );
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->m_PadEnd,
CURRENT_PAD, marge, WRITE_OR_CELL );
/* Regenerates the remaining barriers (which may encroach on the placement
* bits precedent)
*/
i = pcbframe->GetBoard()->GetPadsCount();
for( unsigned ii = 0; ii < pcbframe->GetBoard()->GetPadsCount(); ii++ )
{
D_PAD* ptr = pcbframe->GetBoard()->m_NetInfo->GetPad( ii );
if( ( pt_cur_ch->m_PadStart != ptr ) && ( pt_cur_ch->m_PadEnd != ptr ) )
{
Place_1_Pad_Board( pcbframe->GetBoard(), ptr, ~CURRENT_PAD,
marge, WRITE_AND_CELL );
}
}
InitQueue(); /* initialize the search queue */
apx_dist = GetApxDist( row_source, col_source, row_target, col_target );
/* Initialize first search. */
if( two_sides ) /* Preferred orientation. */
{
if( abs( row_target - row_source ) > abs( col_target - col_source ) )
{
if( pad_masque_layer_s & masque_layer_TOP )
{
start_mask_layer = 2;
if( SetQueue( row_source, col_source, TOP, 0, apx_dist,
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
}
if( pad_masque_layer_s & masque_layer_BOTTOM )
{
start_mask_layer |= 1;
if( SetQueue( row_source, col_source, BOTTOM, 0, apx_dist,
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
}
}
else
{
if( pad_masque_layer_s & masque_layer_BOTTOM )
{
start_mask_layer = 1;
if( SetQueue( row_source, col_source, BOTTOM, 0, apx_dist,
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
}
if( pad_masque_layer_s & masque_layer_TOP )
{
start_mask_layer |= 2;
if( SetQueue( row_source, col_source, TOP, 0, apx_dist,
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
}
}
}
else if( pad_masque_layer_s & masque_layer_BOTTOM )
{
start_mask_layer = 1;
if( SetQueue( row_source, col_source, BOTTOM, 0, apx_dist,
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
}
/* search until success or we exhaust all possibilities */
GetQueue( &r, &c, &side, &d, &apx_dist );
for( ; r != ILLEGAL; GetQueue( &r, &c, &side, &d, &apx_dist ) )
{
curcell = GetCell( r, c, side );
if( curcell & CURRENT_PAD )
curcell &= ~HOLE;
if( (r == row_target) && (c == col_target) /* success if layer OK */
&& ( tab_mask[side] & pad_masque_layer_e) )
{
/* Remove link. */
GRSetDrawMode( DC, GR_XOR );
GRLine( &pcbframe->DrawPanel->m_ClipBox,
DC,
segm_oX,
segm_oY,
segm_fX,
segm_fY,
0,
WHITE );
/* Generate trace. */
if( Retrace( pcbframe, DC, row_source, col_source,
row_target, col_target, side, current_net_code ) )
{
result = SUCCESS; /* Success : Route OK */
}
break; /* Routing complete. */
}
if( pcbframe->DrawPanel->m_AbortRequest )
{
result = STOP_FROM_ESC;
break;
}
/* report every COUNT new nodes or so */
#define COUNT 20000
if( ( OpenNodes - lastopen > COUNT )
|| ( ClosNodes - lastclos > COUNT )
|| ( MoveNodes - lastmove > COUNT ) )
{
lastopen = OpenNodes;
lastclos = ClosNodes;
lastmove = MoveNodes;
msg.Printf( wxT( "Activity: Open %d Closed %d Moved %d" ),
OpenNodes, ClosNodes, MoveNodes );
pcbframe->SetStatusText( msg );
}
_self = 0;
if( curcell & HOLE )
{
_self = 5;
/* set 'present' bits */
for( i = 0; i < 8; i++ )
{
selfok2[i].present = 0;
if( curcell & selfok2[i].trace )
selfok2[i].present = 1;
}
}
for( i = 0; i < 8; i++ ) /* consider neighbors */
{
nr = r + delta[i][0]; nc = c + delta[i][1];
/* off the edge? */
if( nr < 0 || nr >= Nrows || nc < 0 || nc >= Ncols )
continue; /* off the edge */
if( _self == 5 && selfok2[i].present )
continue;
newcell = GetCell( nr, nc, side );
if( newcell & CURRENT_PAD )
newcell &= ~HOLE;
/* check for non-target hole */
if( newcell & HOLE )
{
if( nr != row_target || nc != col_target )
continue;
}
/* check for traces */
else if( newcell & HOLE & ~(newmask[i]) )
continue;
/* check blocking on corner neighbors */
if( delta[i][0] && delta[i][1] )
{
/* check first buddy */
buddy = GetCell( r + blocking[i].r1, c + blocking[i].c1, side );
if( buddy & CURRENT_PAD )
buddy &= ~HOLE;
if( buddy & HOLE )
continue;
// if (buddy & (blocking[i].b1)) continue;
/* check second buddy */
buddy = GetCell( r + blocking[i].r2, c + blocking[i].c2, side );
if( buddy & CURRENT_PAD )
buddy &= ~HOLE;
if( buddy & HOLE )
continue;
// if (buddy & (blocking[i].b2)) continue;
}
olddir = GetDir( r, c, side );
newdist = d + CalcDist( ndir[i], olddir,
( olddir == FROM_OTHERSIDE ) ?
GetDir( r, c, 1 - side ) : 0, side );
/* if (a) not visited yet, or (b) we have */
/* found a better path, add it to queue */
if( !GetDir( nr, nc, side ) )
{
SetDir( nr, nc, side, ndir[i] );
SetDist( nr, nc, side, newdist );
if( SetQueue( nr, nc, side, newdist,
GetApxDist( nr, nc, row_target, col_target ),
row_target, col_target ) == 0 )
{
return ERR_MEMORY;
}
}
else if( newdist < GetDist( nr, nc, side ) )
{
SetDir( nr, nc, side, ndir[i] );
SetDist( nr, nc, side, newdist );
ReSetQueue( nr, nc, side, newdist,
GetApxDist( nr, nc, row_target, col_target ),
row_target, col_target );
}
}
/** Test the other layer. **/
if( two_sides )
{
olddir = GetDir( r, c, side );
if( olddir == FROM_OTHERSIDE )
continue; /* useless move, so don't bother */
if( curcell ) /* can't drill via if anything here */
continue;
/* check for holes or traces on other side */
if( ( newcell = GetCell( r, c, 1 - side ) ) != 0 )
continue;
/* check for nearby holes or traces on both sides */
for( skip = 0, i = 0; i < 8; i++ )
{
nr = r + delta[i][0]; nc = c + delta[i][1];
if( nr < 0 || nr >= Nrows || nc < 0 || nc >= Ncols )
continue; /* off the edge !! */
if( GetCell( nr, nc, side ) /* & blocking2[i]*/ )
{
skip = 1; /* can't drill via here */
break;
}
if( GetCell( nr, nc, 1 - side ) /* & blocking2[i]*/ )
{
skip = 1; /* can't drill via here */
break;
}
}
if( skip ) /* neighboring hole or trace? */
continue; /* yes, can't drill via here */
newdist = d + CalcDist( FROM_OTHERSIDE, olddir, 0, side );
/* if (a) not visited yet,
* or (b) we have found a better path,
* add it to queue */
if( !GetDir( r, c, 1 - side ) )
{
SetDir( r, c, 1 - side, FROM_OTHERSIDE );
SetDist( r, c, 1 - side, newdist );
if( SetQueue( r, c, 1 - side, newdist, apx_dist, row_target,
col_target ) == 0 )
{
return ERR_MEMORY;
}
}
else if( newdist < GetDist( r, c, 1 - side ) )
{
SetDir( r, c, 1 - side, FROM_OTHERSIDE );
SetDist( r, c, 1 - side, newdist );
ReSetQueue( r,
c,
1 - side,
newdist,
apx_dist,
row_target,
col_target );
}
} /* Finished attempt to route on other layer. */
}
end_of_route:
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->m_PadStart,
~CURRENT_PAD, marge, WRITE_AND_CELL );
Place_1_Pad_Board( pcbframe->GetBoard(), pt_cur_ch->m_PadEnd,
~CURRENT_PAD, marge, WRITE_AND_CELL );
msg.Printf( wxT( "Activity: Open %d Closed %d Moved %d"),
OpenNodes, ClosNodes, MoveNodes );
pcbframe->SetStatusText( msg );
return result;
}
static long bit[8][9] =
{
/* OT=Otherside */
/* N, NE, E, SE, S, SW, W, NW, OT */
/* N */
{ LINE_VERTICAL,
BENT_StoNE,
CORNER_SOUTHEAST,
SHARP_StoSE,
0,
SHARP_StoSW,
CORNER_SOUTHWEST,
BENT_StoNW,
( HOLE | HOLE_SOUTH )
},
/* NE */
{
BENT_NtoSW,
DIAG_NEtoSW,
BENT_EtoSW,
ANGLE_SEtoSW,
SHARP_StoSW,
0,
SHARP_WtoSW,
ANGLE_SWtoNW,
( HOLE | HOLE_SOUTHWEST )
},
/* E */
{
CORNER_NORTHWEST,
BENT_WtoNE,
LINE_HORIZONTAL,
BENT_WtoSE,
CORNER_SOUTHWEST,
SHARP_WtoSW,
0,
SHARP_WtoNW,
( HOLE | HOLE_WEST )
},
/* SE */
{
SHARP_NtoNW,
ANGLE_NWtoNE,
BENT_EtoNW,
DIAG_SEtoNW,
BENT_StoNW,
ANGLE_SWtoNW,
SHARP_WtoNW,
0,
( HOLE | HOLE_NORTHWEST )
},
/* S */
{
0,
SHARP_NtoNE,
CORNER_NORTHEAST,
BENT_NtoSE,
LINE_VERTICAL,
BENT_NtoSW,
CORNER_NORTHWEST,
SHARP_NtoNW,
( HOLE | HOLE_NORTH )
},
/* SW */
{
SHARP_NtoNE,
0,
SHARP_EtoNE,
ANGLE_NEtoSE,
BENT_StoNE,
DIAG_NEtoSW,
BENT_WtoNE,
ANGLE_NWtoNE,
( HOLE | HOLE_NORTHEAST )
},
/* W */
{
CORNER_NORTHEAST,
SHARP_EtoNE,
0,
SHARP_EtoSE,
CORNER_SOUTHEAST,
BENT_EtoSW,
LINE_HORIZONTAL,
BENT_EtoNW,
( HOLE | HOLE_EAST )
},
/* NW */
{
BENT_NtoSE,
ANGLE_NEtoSE,
SHARP_EtoSE,
0,
SHARP_StoSE,
ANGLE_SEtoSW,
BENT_WtoSE,
DIAG_SEtoNW,
( HOLE | HOLE_SOUTHEAST )
}
};
/* work from target back to source, actually laying the traces
* Parameters:
* start on side target_side, of coordinates row_target, col_target.
* arrive on side masque_layer_start, coordinate row_source, col_source
* The search is done in reverse routing, the point of arrival (target) to
* the starting point (source)
* The router.
*
* Target_side = symbol (TOP / BOTTOM) of departure
* = Mask_layer_source mask layers Arrival
*
* Returns:
* 0 if error
* > 0 if Ok
*/
static int Retrace( PCB_EDIT_FRAME* pcbframe, wxDC* DC,
int row_source, int col_source,
int row_target, int col_target, int target_side,
int current_net_code )
{
int r0, c0, s0;
int r1, c1, s1; /* row, col, starting side. */
int r2, c2, s2; /* row, col, ending side. */
int x, y = -1;
long b;
r1 = row_target;
c1 = col_target; /* start point is target ( end point is source )*/
s1 = target_side;
r0 = c0 = s0 = ILLEGAL;
wxASSERT( g_CurrentTrackList.GetCount() == 0 );
do {
/* find where we came from to get here */
r2 = r1; c2 = c1; s2 = s1;
x = GetDir( r1, c1, s1 );
switch( x )
{
case FROM_NORTH:
r2++;
break;
case FROM_EAST:
c2++;
break;
case FROM_SOUTH:
r2--;
break;
case FROM_WEST:
c2--;
break;
case FROM_NORTHEAST:
r2++;
c2++;
break;
case FROM_SOUTHEAST:
r2--;
c2++;
break;
case FROM_SOUTHWEST:
r2--;
c2--;
break;
case FROM_NORTHWEST:
r2++;
c2--;
break;
case FROM_OTHERSIDE:
s2 = 1 - s2;
break;
default:
DisplayError( pcbframe,
wxT( "Retrace: internal error: no way back" ) );
return 0;
}
if( r0 != ILLEGAL )
y = GetDir( r0, c0, s0 );
/* see if target or hole */
if( ( ( r1 == row_target ) && ( c1 == col_target ) )
|| ( s1 != s0 ) )
{
int p_dir;
switch( x )
{
case FROM_NORTH:
p_dir = HOLE_NORTH;
break;
case FROM_EAST:
p_dir = HOLE_EAST;
break;
case FROM_SOUTH:
p_dir = HOLE_SOUTH;
break;
case FROM_WEST:
p_dir = HOLE_WEST;
break;
case FROM_NORTHEAST:
p_dir = HOLE_NORTHEAST;
break;
case FROM_SOUTHEAST:
p_dir = HOLE_SOUTHEAST;
break;
case FROM_SOUTHWEST:
p_dir = HOLE_SOUTHWEST;
break;
case FROM_NORTHWEST:
p_dir = HOLE_NORTHWEST;
break;
case FROM_OTHERSIDE:
default:
DisplayError( pcbframe, wxT( "Retrace: error 1" ) );
return 0;
}
OrCell_Trace(
pcbframe->GetBoard(), r1, c1, s1, p_dir, current_net_code );
}
else
{
if( ( y == FROM_NORTH || y == FROM_NORTHEAST
|| y == FROM_EAST || y == FROM_SOUTHEAST
|| y == FROM_SOUTH || y == FROM_SOUTHWEST
|| y == FROM_WEST || y == FROM_NORTHWEST )
&& ( x == FROM_NORTH || x == FROM_NORTHEAST
|| x == FROM_EAST || x == FROM_SOUTHEAST
|| x == FROM_SOUTH || x == FROM_SOUTHWEST
|| x == FROM_WEST || x == FROM_NORTHWEST
|| x == FROM_OTHERSIDE )
&& ( ( b = bit[y - 1][x - 1] ) != 0 ) )
{
OrCell_Trace( pcbframe->GetBoard(), r1, c1, s1, b,
current_net_code );
if( b & HOLE )
OrCell_Trace( pcbframe->GetBoard(), r2, c2, s2, HOLE,
current_net_code );
}
else
{
DisplayError( pcbframe, wxT( "Retrace: error 2" ) );
return 0;
}
}
if( ( r2 == row_source ) && ( c2 == col_source ) ) /* see if source */
{
int p_dir;
switch( x )
{
case FROM_NORTH:
p_dir = HOLE_SOUTH;
break;
case FROM_EAST:
p_dir = HOLE_WEST;
break;
case FROM_SOUTH:
p_dir = HOLE_NORTH;
break;
case FROM_WEST:
p_dir = HOLE_EAST;
break;
case FROM_NORTHEAST:
p_dir = HOLE_SOUTHWEST;
break;
case FROM_SOUTHEAST:
p_dir = HOLE_NORTHWEST;
break;
case FROM_SOUTHWEST:
p_dir = HOLE_NORTHEAST;
break;
case FROM_NORTHWEST:
p_dir = HOLE_SOUTHEAST;
break;
case FROM_OTHERSIDE:
default:
DisplayError( pcbframe, wxT( "Retrace: error 3" ) );
return 0;
}
OrCell_Trace( pcbframe->GetBoard(), r2, c2, s2, p_dir,
current_net_code );
}
/* move to next cell */
r0 = r1;
c0 = c1;
s0 = s1;
r1 = r2;
c1 = c2;
s1 = s2;
} while( !( ( r2 == row_source ) && ( c2 == col_source ) ) );
Place_Piste_en_Buffer( pcbframe, DC );
return 1;
}
/* This function is used by Retrace and read the autorouting matrix data cells to create
* the real track on the physical board
*/
static void OrCell_Trace( BOARD* pcb, int col, int row,
int side, int orient, int current_net_code )
{
int dx0, dy0, dx1, dy1;
TRACK* newTrack;
if( orient == HOLE ) // placement of a via
{
newTrack = new SEGVIA( pcb );
g_CurrentTrackList.PushBack( newTrack );
g_CurrentTrackSegment->SetState( TRACK_AR, ON );
g_CurrentTrackSegment->SetLayer( 0x0F );
g_CurrentTrackSegment->m_Start.x =
g_CurrentTrackSegment->m_End.x = pcb->m_BoundaryBox.m_Pos.x +
( Board.m_GridRouting * row );
g_CurrentTrackSegment->m_Start.y =
g_CurrentTrackSegment->m_End.y = pcb->m_BoundaryBox.m_Pos.y +
( Board.m_GridRouting * col );
g_CurrentTrackSegment->m_Width = pcb->GetCurrentViaSize();
g_CurrentTrackSegment->m_Shape = pcb->GetBoardDesignSettings()->m_CurrentViaType;
g_CurrentTrackSegment->SetNet( current_net_code );
}
else // placement of a standard segment
{
newTrack = new TRACK( pcb );
g_CurrentTrackList.PushBack( newTrack );
g_CurrentTrackSegment->SetLayer( Route_Layer_BOTTOM );
if( side == TOP )
g_CurrentTrackSegment->SetLayer( Route_Layer_TOP );
g_CurrentTrackSegment->SetState( TRACK_AR, ON );
g_CurrentTrackSegment->m_End.x = pcb->m_BoundaryBox.m_Pos.x +
( Board.m_GridRouting * row );
g_CurrentTrackSegment->m_End.y = pcb->m_BoundaryBox.m_Pos.y +
( Board.m_GridRouting * col );
g_CurrentTrackSegment->SetNet( current_net_code );
if( g_CurrentTrackSegment->Back() == NULL ) /* Start trace. */
{
g_CurrentTrackSegment->m_Start.x = segm_fX;
g_CurrentTrackSegment->m_Start.y = segm_fY;
/* Placement on the center of the pad if outside grid. */
dx1 = g_CurrentTrackSegment->m_End.x -
g_CurrentTrackSegment->m_Start.x;
dy1 = g_CurrentTrackSegment->m_End.y -
g_CurrentTrackSegment->m_Start.y;
dx0 = pt_cur_ch->m_PadEnd->GetPosition().x -
g_CurrentTrackSegment->m_Start.x;
dy0 = pt_cur_ch->m_PadEnd->GetPosition().y -
g_CurrentTrackSegment->m_Start.y;
/* If aligned, change the origin point. */
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
g_CurrentTrackSegment->m_Start =
pt_cur_ch->m_PadEnd->GetPosition();
}
else // Creation of a supplemental segment
{
g_CurrentTrackSegment->m_Start =
pt_cur_ch->m_PadEnd->GetPosition();
newTrack = g_CurrentTrackSegment->Copy();
newTrack->m_Start = g_CurrentTrackSegment->m_End;
g_CurrentTrackList.PushBack( newTrack );
}
}
else
{
if( g_CurrentTrackSegment->Back() )
{
g_CurrentTrackSegment->m_Start =
g_CurrentTrackSegment->Back()->m_End;
}
}
g_CurrentTrackSegment->m_Width = pcb->GetCurrentTrackWidth();
if( g_CurrentTrackSegment->m_Start != g_CurrentTrackSegment->m_End )
{
/* Reduce aligned segments by one. */
TRACK* oldTrack = g_CurrentTrackSegment->Back();
if( oldTrack && oldTrack->Type() != TYPE_VIA )
{
dx1 = g_CurrentTrackSegment->m_End.x -
g_CurrentTrackSegment->m_Start.x;
dy1 = g_CurrentTrackSegment->m_End.y -
g_CurrentTrackSegment->m_Start.y;
dx0 = oldTrack->m_End.x - oldTrack->m_Start.x;
dy0 = oldTrack->m_End.y - oldTrack->m_Start.y;
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
oldTrack->m_End = g_CurrentTrackSegment->m_End;
delete g_CurrentTrackList.PopBack();
}
}
}
}
}
/* Insert the new track created in the list of tracks.
* amend the points of beginning and end of the track so that they are
* connected
* Center on pads even if they are off grid.
*/
static void Place_Piste_en_Buffer( PCB_EDIT_FRAME* pcbframe, wxDC* DC )
{
if( g_FirstTrackSegment == NULL )
return;
int dx0, dy0, dx1, dy1;
int marge, via_marge;
EDA_DRAW_PANEL* panel = pcbframe->DrawPanel;
PCB_SCREEN* screen = pcbframe->GetScreen();
marge = s_Clearance + ( pcbframe->GetBoard()->GetCurrentTrackWidth() / 2 );
via_marge = s_Clearance + ( pcbframe->GetBoard()->GetCurrentViaSize() / 2 );
dx1 = g_CurrentTrackSegment->m_End.x - g_CurrentTrackSegment->m_Start.x;
dy1 = g_CurrentTrackSegment->m_End.y - g_CurrentTrackSegment->m_Start.y;
/* Place on center of pad if off grid. */
dx0 = pt_cur_ch->m_PadStart->GetPosition().x - g_CurrentTrackSegment->m_Start.x;
dy0 = pt_cur_ch->m_PadStart->GetPosition().y - g_CurrentTrackSegment->m_Start.y;
/* If aligned, change the origin point. */
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
g_CurrentTrackSegment->m_End = pt_cur_ch->m_PadStart->GetPosition();
}
else
{
TRACK* newTrack = g_CurrentTrackSegment->Copy();
newTrack->m_End = pt_cur_ch->m_PadStart->GetPosition();
newTrack->m_Start = g_CurrentTrackSegment->m_End;
g_CurrentTrackList.PushBack( newTrack );
}
g_FirstTrackSegment->start = Locate_Pad_Connecte( pcbframe->GetBoard(),
g_FirstTrackSegment, START );
if( g_FirstTrackSegment->start )
g_FirstTrackSegment->SetState( BEGIN_ONPAD, ON );
g_CurrentTrackSegment->end = Locate_Pad_Connecte( pcbframe->GetBoard(),
g_CurrentTrackSegment, END );
if( g_CurrentTrackSegment->end )
g_CurrentTrackSegment->SetState( END_ONPAD, ON );
/* Out the new track on the matrix board */
for( TRACK* track = g_FirstTrackSegment; track; track = track->Next() )
{
TraceSegmentPcb( pcbframe->GetBoard(), track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( pcbframe->GetBoard(), track, VIA_IMPOSSIBLE,
via_marge, WRITE_OR_CELL );
}
// Insert new segments in real board
int netcode = g_FirstTrackSegment->GetNet();
TRACK* firstTrack = g_FirstTrackSegment;
int newCount = g_CurrentTrackList.GetCount();
// Put entire new current segment list in BOARD
TRACK* track;
TRACK* insertBeforeMe = g_CurrentTrackSegment->GetBestInsertPoint( pcbframe->GetBoard() );
while( ( track = g_CurrentTrackList.PopFront() ) != NULL )
{
pcbframe->GetBoard()->m_Track.Insert( track, insertBeforeMe );
}
Trace_Une_Piste( panel, DC, firstTrack, newCount, GR_OR );
pcbframe->test_1_net_connexion( DC, netcode );
screen->SetModify();
}