kicad/pcbnew/modules.cpp

604 lines
17 KiB
C++

/***************/
/* modules.cpp */
/***************/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "trigo.h"
#include "protos.h"
#include "drag.h"
static void Abort_MoveOrCopyModule( WinEDA_DrawPanel* Panel, wxDC* DC );
static MODULE* s_ModuleInitialCopy = NULL; // Copy of module for
// abort/undo command
static PICKED_ITEMS_LIST s_PickedList; // a picked list to
// save initial module
// and dragged tracks
/* Show or hide module pads.
*/
void Show_Pads_On_Off( WinEDA_DrawPanel* panel, wxDC* DC, MODULE* module )
{
D_PAD* pt_pad;
bool pad_fill_tmp;
if( module == 0 )
return;
pad_fill_tmp = DisplayOpt.DisplayPadFill;
DisplayOpt.DisplayPadFill = true; /* Trace en SKETCH */
pt_pad = module->m_Pads;
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
{
pt_pad->Draw( panel, DC, GR_XOR, g_Offset_Module );
}
DisplayOpt.DisplayPadFill = pad_fill_tmp;
}
/* Show or hide ratsnest
*/
void Rastnest_On_Off( WinEDA_DrawPanel* panel, wxDC* DC, MODULE* module )
{
WinEDA_BasePcbFrame* frame = (WinEDA_BasePcbFrame*) panel->GetParent();
frame->build_ratsnest_module( DC, module );
frame->trace_ratsnest_module( DC );
}
/* Get a module name from user and return a pointer to the corresponding module
*/
MODULE* WinEDA_BasePcbFrame::GetModuleByName()
{
wxString modulename;
MODULE* module = NULL;
Get_Message( _( "Name:" ), _( "Search footprint" ), modulename, this );
if( !modulename.IsEmpty() )
{
module = GetBoard()->m_Modules;
while( module )
{
if( module->m_Reference->m_Text.CmpNoCase( modulename ) == 0 )
break;
module = module->Next();
}
}
return module;
}
void WinEDA_PcbFrame::StartMove_Module( MODULE* module, wxDC* DC )
{
if( module == NULL )
return;
if( s_ModuleInitialCopy )
delete s_ModuleInitialCopy;
s_PickedList.ClearItemsList(); // Should be empty, but...
// Creates a copy of the current module, for abort and undo commands
s_ModuleInitialCopy = new MODULE( GetBoard() );
s_ModuleInitialCopy->Copy( module );
s_ModuleInitialCopy->m_Flags = 0;
SetCurItem( module );
GetBoard()->m_Status_Pcb &= ~RATSNEST_ITEM_LOCAL_OK;
module->m_Flags |= IS_MOVED;
GetScreen()->m_Curseur = module->m_Pos;
DrawPanel->MouseToCursorSchema();
/* Show ratsnest. */
if( g_Show_Ratsnest )
DrawGeneralRatsnest( DC );
if( g_DragSegmentList ) /* Should not occur ! */
{
EraseDragListe();
}
if( g_Drag_Pistes_On )
{
Build_Drag_Liste( DrawPanel, DC, module );
ITEM_PICKER itemWrapper( NULL, UR_CHANGED );
for( DRAG_SEGM* pt_drag = g_DragSegmentList;
pt_drag != NULL;
pt_drag = pt_drag->Pnext )
{
TRACK* segm = pt_drag->m_Segm;
itemWrapper.m_PickedItem = segm;
itemWrapper.m_Link = segm->Copy();
itemWrapper.m_Link->SetState( EDIT, OFF );
s_PickedList.PushItem( itemWrapper );
}
}
GetBoard()->m_Status_Pcb |= DO_NOT_SHOW_GENERAL_RASTNEST;
DrawPanel->ManageCurseur = Montre_Position_Empreinte;
DrawPanel->ForceCloseManageCurseur = Abort_MoveOrCopyModule;
DrawPanel->m_AutoPAN_Request = TRUE;
// Erase the module.
if( DC )
{
int tmp = module->m_Flags;
module->m_Flags |= DO_NOT_DRAW;
DrawPanel->PostDirtyRect( module->GetBoundingBox() );
module->m_Flags = tmp;
}
DrawPanel->ManageCurseur( DrawPanel, DC, FALSE );
}
/* Called on a move or copy module command abort
*/
void Abort_MoveOrCopyModule( WinEDA_DrawPanel* Panel, wxDC* DC )
{
DRAG_SEGM* pt_drag;
TRACK* pt_segm;
MODULE* module;
WinEDA_PcbFrame* pcbframe = (WinEDA_PcbFrame*) Panel->GetParent();
module = (MODULE*) pcbframe->GetScreen()->GetCurItem();
pcbframe->GetBoard()->m_Status_Pcb &= ~RATSNEST_ITEM_LOCAL_OK;
if( module )
{
// Erase the current footprint on screen
DrawModuleOutlines( Panel, DC, module );
/* If a move command: return to old position
* If a copy command, delete the new footprint
*/
if( module->m_Flags & IS_MOVED ) // Move command
{
if( g_Drag_Pistes_On )
{
/* Erase on screen dragged tracks */
pt_drag = g_DragSegmentList;
for( ; pt_drag != NULL; pt_drag = pt_drag->Pnext )
{
pt_segm = pt_drag->m_Segm;
pt_segm->Draw( Panel, DC, GR_XOR );
}
}
/* Go to old position for dragged tracks */
pt_drag = g_DragSegmentList;
for( ; pt_drag != NULL; pt_drag = pt_drag->Pnext )
{
pt_segm = pt_drag->m_Segm; pt_segm->SetState( EDIT, OFF );
pt_drag->SetInitialValues();
pt_segm->Draw( Panel, DC, GR_OR );
}
EraseDragListe();
module->m_Flags = 0;
}
if( (module->m_Flags & IS_NEW) ) // Copy command: delete new footprint
{
module->DeleteStructure();
module = NULL;
pcbframe->GetBoard()->m_Status_Pcb = 0;
pcbframe->GetBoard()->m_NetInfo->BuildListOfNets();
}
}
/* Redraw the module. */
if( module && s_ModuleInitialCopy )
{
if( s_ModuleInitialCopy->m_Orient != module->m_Orient )
pcbframe->Rotate_Module( NULL,
module,
s_ModuleInitialCopy->m_Orient,
FALSE );
if( s_ModuleInitialCopy->GetLayer() != module->GetLayer() )
pcbframe->Change_Side_Module( module, NULL );
module->Draw( Panel, DC, GR_OR );
}
g_Drag_Pistes_On = FALSE;
Panel->ManageCurseur = NULL;
Panel->ForceCloseManageCurseur = NULL;
pcbframe->SetCurItem( NULL );
delete s_ModuleInitialCopy;
s_ModuleInitialCopy = NULL;
s_PickedList.ClearListAndDeleteItems();
// Display ratsnest is allowed
pcbframe->GetBoard()->m_Status_Pcb &= ~DO_NOT_SHOW_GENERAL_RASTNEST;
if( g_Show_Ratsnest )
pcbframe->DrawGeneralRatsnest( DC );
}
/**
* Function Copie_Module
* Copy an existing footprint. The new footprint is added in module list
* @param module = footprint to copy
* @return a pointer on the new footprint (the copy of the existing footprint)
*/
MODULE* WinEDA_BasePcbFrame::Copie_Module( MODULE* module )
{
MODULE* newmodule;
if( module == NULL )
return NULL;
GetScreen()->SetModify();
/* Duplicate module */
GetBoard()->m_Status_Pcb = 0;
newmodule = new MODULE( GetBoard() );
newmodule->Copy( module );
GetBoard()->Add( newmodule, ADD_APPEND );
newmodule->m_Flags = IS_NEW;
GetBoard()->m_NetInfo->BuildListOfNets();
newmodule->DisplayInfo( this );
GetBoard()->m_Status_Pcb &= ~RATSNEST_ITEM_LOCAL_OK;
return newmodule;
}
/* Redraw the footprint when moving the mouse.
*/
void Montre_Position_Empreinte( WinEDA_DrawPanel* panel, wxDC* DC, bool erase )
{
MODULE* module = (MODULE*) panel->GetScreen()->GetCurItem();
if( module == NULL )
return;
/* Erase current footprint. */
if( erase )
{
DrawModuleOutlines( panel, DC, module );
}
/* Redraw the module at the new position. */
g_Offset_Module = module->m_Pos - panel->GetScreen()->m_Curseur;
DrawModuleOutlines( panel, DC, module );
Dessine_Segments_Dragges( panel, DC );
}
/**
* Function Delete Module
* Remove a footprint from m_Modules linked list and put it in undelete buffer
* The ratsnest and pad list are recalculated
* @param module = footprint to delete
* @param DC = currentDevice Context. if NULL: do not redraw new ratsnest and
* dirty rectangle
* @param aPromptBeforeDeleting : if true: ask for confirmation before deleting
*/
bool WinEDA_PcbFrame::Delete_Module( MODULE* module,
wxDC* DC,
bool aAskBeforeDeleting )
{
wxString msg;
if( module == NULL )
return FALSE;
module->DisplayInfo( this );
/* Confirm module delete. */
if( aAskBeforeDeleting )
{
msg << _( "Delete Module" ) << wxT( " " ) << module->m_Reference->m_Text
<< wxT( " (" ) << _( "Value " ) << module->m_Value->m_Text
<< wxT( ") ?" );
if( !IsOK( this, msg ) )
{
return FALSE;
}
}
GetScreen()->SetModify();
/* Erase ratsnest if needed
* Dirty rectangle is not used here because usually using a XOR draw mode
* gives good results (very few artifacts) for ratsnest
*/
if( g_Show_Ratsnest )
DrawGeneralRatsnest( DC );
/* Remove module from list, and put it in undo command list */
m_Pcb->m_Modules.Remove( module );
module->SetState( DELETED, ON );
SaveCopyInUndoList( module, UR_DELETED );
Compile_Ratsnest( DC, true );
// redraw the area where the module was
if( DC )
DrawPanel->PostDirtyRect( module->GetBoundingBox() );
RedrawActiveWindow( DC, TRUE );
return TRUE;
}
/**
* Function Change_Side_Module
* Flip a footprint (switch layer from component or component to copper)
* The mirroring is made from X axis
* if a footprint is not on copper or component layer it is not flipped
* (it could be on an adhesive layer, not supported at this time)
* @param Module the footprint to flip
* @param DC Current Device Context. if NULL, no redraw
*/
void WinEDA_PcbFrame::Change_Side_Module( MODULE* Module, wxDC* DC )
{
if( Module == NULL )
return;
if( ( Module->GetLayer() != LAYER_N_FRONT )
&& ( Module->GetLayer() != LAYER_N_BACK ) )
return;
GetScreen()->SetModify();
if( !( Module->m_Flags & IS_MOVED ) ) /* This is a simple flip, no other
*edition in progress */
{
GetBoard()->m_Status_Pcb &= ~( LISTE_RATSNEST_ITEM_OK | CONNEXION_OK );
if( DC )
{
int tmp = Module->m_Flags;
Module->m_Flags |= DO_NOT_DRAW;
DrawPanel->PostDirtyRect( Module->GetBoundingBox() );
Module->m_Flags = tmp;
}
/* Show ratsnest if necessary. */
if( DC && g_Show_Ratsnest )
DrawGeneralRatsnest( DC );
g_Offset_Module.x = 0;
g_Offset_Module.y = 0;
}
else // Module is being moved.
{
/* Erase footprint and draw outline if it has been already drawn. */
if( DC )
{
DrawModuleOutlines( DrawPanel, DC, Module );
Dessine_Segments_Dragges( DrawPanel, DC );
}
}
/* Flip the module */
Module->Flip( Module->m_Pos );
Module->DisplayInfo( this );
if( !( Module->m_Flags & IS_MOVED ) ) /* Inversion simple */
{
if( DC )
{
Module->Draw( DrawPanel, DC, GR_OR );
Compile_Ratsnest( DC, true );
}
}
else
{
if( DC )
{
DrawModuleOutlines( DrawPanel, DC, Module );
Dessine_Segments_Dragges( DrawPanel, DC );
}
GetBoard()->m_Status_Pcb &= ~RATSNEST_ITEM_LOCAL_OK;
}
}
/* Place module at cursor position.
*
* DC (if NULL: no display screen has the output.
* Update module coordinates with the new position.
*/
void WinEDA_BasePcbFrame::Place_Module( MODULE* module,
wxDC* DC,
bool aDoNotRecreateRatsnest )
{
TRACK* pt_segm;
wxPoint newpos;
if( module == 0 )
return;
GetScreen()->SetModify();
GetBoard()->m_Status_Pcb &= ~( LISTE_RATSNEST_ITEM_OK | CONNEXION_OK);
if( module->m_Flags & IS_NEW )
{
SaveCopyInUndoList( module, UR_NEW );
}
else if( (module->m_Flags & IS_MOVED ) )
{
ITEM_PICKER picker( module, UR_CHANGED );
picker.m_Link = s_ModuleInitialCopy;
s_PickedList.PushItem( picker );
s_ModuleInitialCopy = NULL; // the picker is now owner of
// s_ModuleInitialCopy.
}
if( s_PickedList.GetCount() )
{
SaveCopyInUndoList( s_PickedList, UR_UNSPECIFIED );
// Clear list, but DO NOT delete items,
// because they are owned by the saved undo list and they therefore in
// use
s_PickedList.ClearItemsList();
}
if( g_Show_Module_Ratsnest && ( GetBoard()->m_Status_Pcb & LISTE_PAD_OK )
&& DC )
trace_ratsnest_module( DC );
newpos = GetScreen()->m_Curseur;
module->SetPosition( newpos );
module->m_Flags = 0;
delete s_ModuleInitialCopy;
s_ModuleInitialCopy = NULL;
if( DC )
module->Draw( DrawPanel, DC, GR_OR );
if( g_DragSegmentList )
{
/* Redraw dragged track segments */
for( DRAG_SEGM* pt_drag = g_DragSegmentList;
pt_drag != NULL;
pt_drag = pt_drag->Pnext )
{
pt_segm = pt_drag->m_Segm;
pt_segm->SetState( EDIT, OFF );
if( DC )
pt_segm->Draw( DrawPanel, DC, GR_OR );
}
// Delete drag list
EraseDragListe();
}
g_Drag_Pistes_On = FALSE;
DrawPanel->ManageCurseur = NULL;
DrawPanel->ForceCloseManageCurseur = NULL;
if( !aDoNotRecreateRatsnest )
Compile_Ratsnest( DC, true );
if( DC )
RedrawActiveWindow( DC, TRUE );
module->DisplayInfo( this );
}
/*
* Rotate the footprint angle degrees in the direction < 0.
* If incremental == TRUE, the rotation is made from the last orientation,
* If the module is placed in the absolute orientation angle.
* If DC == NULL, the component does not redraw.
* Otherwise, it erases and redraws turns
*/
void WinEDA_BasePcbFrame::Rotate_Module( wxDC* DC, MODULE* module,
int angle, bool incremental )
{
if( module == NULL )
return;
GetScreen()->SetModify();
if( !( module->m_Flags & IS_MOVED ) ) /* This is a simple rotation, no other
* edition in progress */
{
if( DC ) // Erase footprint to screen
{
int tmp = module->m_Flags;
module->m_Flags |= DO_NOT_DRAW;
DrawPanel->PostDirtyRect( module->GetBoundingBox() );
module->m_Flags = tmp;
if( g_Show_Ratsnest )
DrawGeneralRatsnest( DC );
}
}
else
{
if( DC )
{
DrawModuleOutlines( DrawPanel, DC, module );
Dessine_Segments_Dragges( DrawPanel, DC );
}
}
GetBoard()->m_Status_Pcb &= ~( LISTE_RATSNEST_ITEM_OK | CONNEXION_OK );
if( incremental )
module->SetOrientation( module->m_Orient + angle );
else
module->SetOrientation( angle );
module->DisplayInfo( this );
if( DC )
{
if( !( module->m_Flags & IS_MOVED ) ) /* Rotation simple */
{
module->Draw( DrawPanel, DC, GR_OR );
Compile_Ratsnest( DC, true );
}
else
{
DrawModuleOutlines( DrawPanel, DC, module );
Dessine_Segments_Dragges( DrawPanel, DC );
}
RedrawActiveWindow( DC, TRUE );
}
}
/*************************************************/
/* Redraw mode XOR the silhouette of the module. */
/*************************************************/
void DrawModuleOutlines( WinEDA_DrawPanel* panel, wxDC* DC, MODULE* module )
{
int pad_fill_tmp;
D_PAD* pt_pad;
if( module == NULL )
return;
module->DrawEdgesOnly( panel, DC, g_Offset_Module, GR_XOR );
if( g_Show_Pads_Module_in_Move )
{
pad_fill_tmp = DisplayOpt.DisplayPadFill;
#ifndef __WXMAC__
DisplayOpt.DisplayPadFill = true;
#else
DisplayOpt.DisplayPadFill = false;
#endif
pt_pad = module->m_Pads;
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
{
pt_pad->Draw( panel, DC, GR_XOR, g_Offset_Module );
}
DisplayOpt.DisplayPadFill = pad_fill_tmp;
}
if( g_Show_Module_Ratsnest && panel )
{
WinEDA_BasePcbFrame* frame = (WinEDA_BasePcbFrame*) panel->GetParent();
frame->build_ratsnest_module( DC, module );
frame->trace_ratsnest_module( DC );
}
}