kicad/pcbnew/zones_convert_brd_items_to_...

855 lines
32 KiB
C++

/*******************************************/
/* zones_convert_brd_items_to_polygons.cpp */
/*******************************************/
/* Functions to convert some board items to polygons
* (pads, tracks ..)
* This is used to calculate filled areas in copper zones.
* Filled areas are areas remainder of the full zone area after removed all polygons
* calculated from these items shapes and the clearance area
*
* Important note:
* Because filled areas must have a minimum thickness to match with Design rule, they are draw in 2 step:
* 1 - filled polygons are drawn
* 2 - polygon outlines are drawn with a "minimum thickness width" ( or with a minimum thickness pen )
* So outlines of filled polygons are calculated with the constraint they match with clearance,
* taking in account outlines have thickness
* This ensures:
* - areas meet the minimum thickness requirement.
* - shapes are smoothed.
*/
#include <math.h>
#include <vector>
#include "fctsys.h"
#include "common.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "trigo.h"
#include "zones.h"
#include "PolyLine.h"
// Kbool 1.9 and before had sometimes problemes when calculating thermal shapes as polygons (this is the best solution)
// Kbool 2.0 has solved some problems, but not all
// Kbool 2.1 has solved some others problems, but not all
// Used to create data files to debug Kbool
#include "debug_kbool_key_file_fct.h"
// Also we can create test files for Kbool bebug purposes
// when CREATE_KBOOL_KEY_FILES is defined
// See debug_kbool_key_file_fct.h
extern void Test_For_Copper_Island_And_Remove( BOARD* aPcb,
ZONE_CONTAINER* aZone_container );
extern void TransformRoundedEndsSegmentToPolygon( std::vector <CPolyPt>& aCornerBuffer,
wxPoint aStart, wxPoint aEnd,
int aCircleToSegmentsCount,
int aWidth );
void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
D_PAD& aPad,
int aThermalGap,
int aCopperThickness,
int aMinThicknessValue,
int aCircleToSegmentsCount,
double aCorrectionFactor,
int aThermalRot );
// Local Functions:
void AddTrackWithClearancePolygon( Bool_Engine* aBooleng,
TRACK& aTrack, int aClearanceValue );
void AddPadWithClearancePolygon( Bool_Engine* aBooleng, D_PAD& aPad, int aClearanceValue );
int AddThermalReliefPadPolygon( Bool_Engine* aBooleng,
D_PAD& aPad,
int aThermalGap,
int aCopperThickness, int aMinThicknessValue );
void AddRoundedEndsSegmentPolygon( Bool_Engine* aBooleng,
wxPoint aStart, wxPoint aEnd,
int aWidth );
// Local Variables:
/* how many segments are used to create a polygon from a circle: */
static int s_CircleToSegmentsCount = 16; /* default value. the real value will be changed to 32
* if g_Zone_Arc_Approximation == 1
*/
double s_Correction; /* mult coeff used to enlarge rounded and oval pads (and vias)
* because the segment approximation for arcs and circles
* create a smaller gap than a true circle
*/
/** function AddClearanceAreasPolygonsToPolysList
* Supports a min thickness area constraint.
* Add non copper areas polygons (pads and tracks with clearence)
* to the filled copper area found
* in BuildFilledPolysListData after calculating filled areas in a zone
* Non filled copper areas are pads and track and their clearance areas
* The filled copper area must be computed just before.
* BuildFilledPolysListData() call this function just after creating the
* filled copper area polygon (without clearence areas
* to do that this function:
* 1 - creates a Bool_Engine,with option: holes are linked to outer contours by double overlapping segments
* this means the created polygons have no holes (hole are linked to outer outline by double overlapped segments
* and are therefore compatible with draw functions (DC draw polygons and Gerber or PS outputs)
* 2 - Add the main outline (zone outline) in group A
* 3 - Creates a correction using BOOL_CORRECTION operation to shrink the resulting area
* with m_ZoneMinThickness/2 value.
* The result is areas with a margin of m_ZoneMinThickness/2
* When drawing outline with segments having a thickness of m_ZoneMinThickness, the outlines will
* match exactly the initial outlines
* 4 - recreates the same Bool_Engine, with no correction
* 5 - Add the main modified outline (zone outline) in group A
* 6 - Add all non filled areas (pads, tracks) in group B with a clearance of m_Clearance + m_ZoneMinThickness/2
* 7 - calculates the polygon A - B
* 8 - put resulting list of polygons (filled areas) in m_FilledPolysList
* This zone contains pads with the same net.
* 9 - Remove insulated copper islands
* 10 - If Thermal shapes are wanted, remove copper around pads in zone, in order to create thes thermal shapes
* a - Creates a bool engine and add the last copper areas in group A
* b - Add thermal shapes (non copper ares in group B
* c - Calculates the polygon A - B
* 11 - Remove new insulated copper islands
*/
/* Important note:
* One can add thermal areas in the step 6, with others items to substract.
* It is faster.
* But :
* kbool fails sometimes in this case (see comments in AddThermalReliefPadPolygon )
* The separate step to make thermal shapes allows a more sophisticated algorith (todo)
* like remove thermal copper bridges in thermal shapes that are not connected to an area
*/
void ZONE_CONTAINER::AddClearanceAreasPolygonsToPolysList( BOARD* aPcb )
{
bool have_poly_to_substract = false;
// Set the number of segments in arc approximations
if( m_ArcToSegmentsCount == 32 )
s_CircleToSegmentsCount = 32;
else
s_CircleToSegmentsCount = 16;
/* calculates the coeff to compensate radius reduction of holes clearance
* due to the segment approx.
* For a circle the min radius is radius * cos( 2PI / s_CircleToSegmentsCount / 2)
* s_Correction is 1 /cos( PI/s_CircleToSegmentsCount )
*/
s_Correction = 1.0 / cos( 3.14159265 / s_CircleToSegmentsCount );
/* Uses a kbool engine to add holes in the m_FilledPolysList polygon.
* Because this function is called just after creating the m_FilledPolysList,
* only one polygon is in list.
* (initial holes in zones are linked into outer contours by double overlapping segments).
* because after adding holes, many polygons could be exist in this list.
*/
Bool_Engine* booleng = new Bool_Engine();
ArmBoolEng( booleng, true );
/* First, Add the main polygon (i.e. the filled area using only one outline)
* in GroupA in Bool_Engine to do a BOOL_CORRECTION operation
* to reserve a m_ZoneMinThickness/2 margind around the outlines and holes
* the margin will be filled when redraw outilnes with segments having a width set to
* m_ZoneMinThickness
* so m_ZoneMinThickness is the min thickness of the filled zones areas
*/
CopyPolygonsFromFilledPolysListToBoolengine( booleng, GROUP_A );
booleng->SetCorrectionFactor( (double) -m_ZoneMinThickness / 2 );
booleng->Do_Operation( BOOL_CORRECTION );
/* Now copy the new outline in m_FilledPolysList */
m_FilledPolysList.clear();
CopyPolygonsFromBoolengineToFilledPolysList( booleng );
delete booleng;
if( m_FilledPolysList.size() == 0 )
return;
/* Second, Add the main (corrected) polygon (i.e. the filled area using only one outline)
* in GroupA in Bool_Engine to do a BOOL_A_SUB_B operation
* All areas to remove will be put in GroupB in Bool_Engine
*/
booleng = new Bool_Engine();
ArmBoolEng( booleng, true );
/* Calculates the clearance value that meet DRC requirements
* from m_ZoneClearance and clearance from the corresponding netclass
* We have a "local" clearance in zones because most of time
* clearance between a zone and others items is bigger than the netclass clearance
* this is more true for small clearance values
* Note also the "local" clearance is used for clearance between non copper items
* or items like texts on copper layers
*/
int zone_clearance = max( m_ZoneClearance, GetClearance() );
zone_clearance += m_ZoneMinThickness / 2;
/* Add holes (i.e. tracks and pads areas as polygons outlines)
* in GroupB in Bool_Engine
*/
/* items ouside the zone bounding box are skipped
* the bounding box is the zone bounding box + the biggest clearance found in Netclass list
*/
EDA_Rect item_boundingbox;
EDA_Rect zone_boundingbox = GetBoundingBox();
int biggest_clearance = aPcb->GetBiggestClearanceValue();
biggest_clearance = MAX( biggest_clearance, zone_clearance );
zone_boundingbox.Inflate( biggest_clearance, biggest_clearance );
#ifdef CREATE_KBOOL_KEY_FILES_FIRST_PASS
CreateKeyFile();
OpenKeyFileEntity( "Layer_fp" );
CopyPolygonsFromFilledPolysListToKeyFile( this, 0 );
#endif
/*
* First : Add pads. Note: pads having the same net as zone are left in zone.
* Thermal shapes will be created later if necessary
*/
int item_clearance;
have_poly_to_substract = false;
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->m_Pads; pad != NULL; pad = pad->Next() )
{
if( !pad->IsOnLayer( GetLayer() ) )
continue;
if( pad->GetNet() != GetNet() )
{
item_clearance = pad->GetClearance() + (m_ZoneMinThickness / 2);
item_boundingbox = pad->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
AddPadWithClearancePolygon( booleng, *pad, MAX( zone_clearance, item_clearance ) );
have_poly_to_substract = true;
}
continue;
}
int gap = zone_clearance;
if( (m_PadOption == PAD_NOT_IN_ZONE)
|| (GetNet() == 0) || pad->m_PadShape == PAD_TRAPEZOID )
// PAD_TRAPEZOID shapes are not in zones because they are used in microwave apps
// and i think it is good that shapes are not changed by thermal pads or others
{
item_boundingbox = pad->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
AddPadWithClearancePolygon( booleng, *pad, gap );
have_poly_to_substract = true;
}
}
}
}
/* Add holes (i.e. tracks and pads areas as polygons outlines)
* in GroupB in Bool_Engine
* Next : Add tracks and vias
*/
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( !track->IsOnLayer( GetLayer() ) )
continue;
if( track->GetNet() == GetNet() && (GetNet() != 0) )
continue;
item_clearance = track->GetClearance() + (m_ZoneMinThickness / 2);
item_boundingbox = track->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
AddTrackWithClearancePolygon( booleng, *track, MAX( zone_clearance, item_clearance ) );
have_poly_to_substract = true;
}
}
static std::vector <CPolyPt> cornerBuffer;
cornerBuffer.clear();
/* Add module edge items that are on copper layers
* Pcbnew allows these items to be on copper layers in microwvae applictions
* This is a bad thing, but must be handle here, until a better way is found
*/
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->m_Drawings; item; item = item->Next() )
{
if( !item->IsOnLayer( GetLayer() ) )
continue;
if( item->Type( ) != TYPE_EDGE_MODULE)
continue;
item_boundingbox = item->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
(( EDGE_MODULE* )item)->TransformShapeWithClearanceToPolygon(
cornerBuffer, m_ZoneClearance,
s_CircleToSegmentsCount, s_Correction );
}
}
}
// Add graphic items (copper texts) and board edges
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
if( item->GetLayer() != GetLayer() && item->GetLayer() != EDGE_N )
continue;
switch( item->Type() )
{
case TYPE_DRAWSEGMENT:
( (DRAWSEGMENT*) item )->TransformShapeWithClearanceToPolygon(
cornerBuffer,
m_ZoneClearance,
s_CircleToSegmentsCount,
s_Correction );
break;
case TYPE_TEXTE:
( (TEXTE_PCB*) item )->TransformShapeWithClearanceToPolygon(
cornerBuffer,
m_ZoneClearance,
s_CircleToSegmentsCount,
s_Correction );
break;
default:
break;
}
}
// cornerBuffer contains more than one polygon,
// so read cornerBuffer and verify if there is a end of polygon corner:
for( unsigned icnt = 0; icnt < cornerBuffer.size(); )
{
booleng->StartPolygonAdd( GROUP_B );
{
have_poly_to_substract = true;
unsigned ii;
for( ii = icnt; ii < cornerBuffer.size(); ii++ )
{
booleng->AddPoint( cornerBuffer[ii].x, cornerBuffer[ii].y );
if( cornerBuffer[ii].end_contour )
break;
}
booleng->EndPolygonAdd();
#ifdef CREATE_KBOOL_KEY_FILES_FIRST_PASS
StartKeyFilePolygon( 1 );
for( ii = icnt; ii < cornerBuffer.size(); ii++ )
{
AddKeyFilePointXY( cornerBuffer[ii].x, cornerBuffer[ii].y );
if( cornerBuffer[ii].end_contour )
break;
}
EndKeyFilePolygon();
#endif
icnt = ii + 1;
}
}
#ifdef CREATE_KBOOL_KEY_FILES_FIRST_PASS
CloseKeyFileEntity();
CloseKeyFile();
#endif
/* calculates copper areas */
if( have_poly_to_substract )
{
/* Add the main corrected polygon (i.e. the filled area using only one outline)
* in GroupA in Bool_Engine
*/
CopyPolygonsFromFilledPolysListToBoolengine( booleng, GROUP_A );
booleng->Do_Operation( BOOL_A_SUB_B );
/* put these areas in m_FilledPolysList */
m_FilledPolysList.clear();
CopyPolygonsFromBoolengineToFilledPolysList( booleng );
}
delete booleng;
// Remove insulated islands:
if( GetNet() > 0 )
Test_For_Copper_Island_And_Remove_Insulated_Islands( aPcb );
// remove thermal gaps if required:
if( m_PadOption != THERMAL_PAD || aPcb->m_Modules == NULL )
return;
// Remove thermal symbols
have_poly_to_substract = false;
if( m_PadOption == THERMAL_PAD )
{
booleng = new Bool_Engine();
ArmBoolEng( booleng, true );
have_poly_to_substract = false;
#ifdef CREATE_KBOOL_KEY_FILES
CreateKeyFile();
OpenKeyFileEntity( "Layer" );
CopyPolygonsFromFilledPolysListToKeyFile( this, 0 );
#endif
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->m_Pads; pad != NULL; pad = pad->Next() )
{
if( !pad->IsOnLayer( GetLayer() ) )
continue;
if( pad->GetNet() != GetNet() )
continue;
item_boundingbox = pad->GetBoundingBox();
item_boundingbox.Inflate( m_ThermalReliefGapValue, m_ThermalReliefGapValue );
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
if( AddThermalReliefPadPolygon( booleng, *pad,
m_ThermalReliefGapValue,
m_ThermalReliefCopperBridgeValue,
m_ZoneMinThickness ) )
have_poly_to_substract = true;
}
}
}
#ifdef CREATE_KBOOL_KEY_FILES
CloseKeyFileEntity();
#endif
if( have_poly_to_substract )
{
/* Add the main corrected polygon (i.e. the filled area using only one outline)
* in GroupA in Bool_Engine
*/
CopyPolygonsFromFilledPolysListToBoolengine( booleng, GROUP_A );
/* remove thermal areas (non copper areas) */
booleng->Do_Operation( BOOL_A_SUB_B );
/* put these areas in m_FilledPolysList */
m_FilledPolysList.clear();
CopyPolygonsFromBoolengineToFilledPolysList( booleng );
}
delete booleng;
// Remove insulated islands:
if( GetNet() > 0 )
Test_For_Copper_Island_And_Remove_Insulated_Islands( aPcb );
#ifdef CREATE_KBOOL_KEY_FILES
CloseKeyFile();
#endif
}
// Now we remove all unused thermal stubs.
#define REMOVE_UNUSED_THERMAL_STUBS // Can be commented to skip unused thermal stubs calculations
#ifdef REMOVE_UNUSED_THERMAL_STUBS
/* Add the main (corrected) polygon (i.e. the filled area using only one outline)
* in GroupA in Bool_Engine to do a BOOL_A_SUB_B operation
* All areas to remove will be put in GroupB in Bool_Engine
*/
booleng = new Bool_Engine();
ArmBoolEng( booleng, true );
/*
* Test and add polygons to remove thermal stubs.
*/
have_poly_to_substract = false;
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->m_Pads; pad != NULL; pad = pad->Next() )
{
// check
if( !pad->IsOnLayer( GetLayer() ) )
continue;
if( pad->GetNet() != GetNet() )
continue;
item_boundingbox = pad->GetBoundingBox();
item_boundingbox.Inflate( m_ThermalReliefGapValue, m_ThermalReliefGapValue );
if( !( item_boundingbox.Intersects( zone_boundingbox ) ) )
continue;
// test point
int dx =
( pad->m_Size.x / 2 ) + m_ThermalReliefGapValue;
int dy =
( pad->m_Size.y / 2 ) + m_ThermalReliefGapValue;
// This is CIRCLE pad tweak (for circle pads the thermal stubs are at 45 deg)
int fAngle = pad->m_Orient;
if( pad->m_PadShape == PAD_CIRCLE )
{
dx = (int) ( dx * s_Correction );
dy = dx;
#ifdef CREATE_KBOOL_KEY_FILES_WITH_0_DEG
fAngle = 0;
#else
fAngle = 450;
#endif
}
// compute north, south, west and east points for zone connection.
// Add a small value to ensure point is inside (or outside) zone, not on an edge
wxPoint ptTest[4];
ptTest[0] = wxPoint( 0, 3 + dy + m_ZoneMinThickness / 2 );
ptTest[1] = wxPoint( 0, -(3 + dy + m_ZoneMinThickness / 2) );
ptTest[2] = wxPoint( 3 + dx + m_ZoneMinThickness / 2, 0 );
ptTest[3] = wxPoint( -(3 + dx + m_ZoneMinThickness / 2), 0 );
// Test all sides
for( int i = 0; i<4; i++ )
{
// rotate point
RotatePoint( &ptTest[i], fAngle );
// translate point
ptTest[i] += pad->ReturnShapePos();
bool inside = HitTestFilledArea( ptTest[i] );
if( inside == false )
{
// polygon buffer
std::vector<wxPoint> corners_buffer;
// polygons are rectangles with width of copper bridge value
// contour line width has to be taken into calculation to avoid "thermal stub bleed"
const int iDTRC =
( m_ThermalReliefCopperBridgeValue - m_ZoneMinThickness ) / 2;
switch( i )
{
case 0:
corners_buffer.push_back( wxPoint( -iDTRC, dy ) );
corners_buffer.push_back( wxPoint( +iDTRC, dy ) );
corners_buffer.push_back( wxPoint( +iDTRC, iDTRC ) );
corners_buffer.push_back( wxPoint( -iDTRC, iDTRC ) );
break;
case 1:
corners_buffer.push_back( wxPoint( -iDTRC, -dy ) );
corners_buffer.push_back( wxPoint( +iDTRC, -dy ) );
corners_buffer.push_back( wxPoint( +iDTRC, -iDTRC ) );
corners_buffer.push_back( wxPoint( -iDTRC, -iDTRC ) );
break;
case 2:
corners_buffer.push_back( wxPoint( dx, -iDTRC ) );
corners_buffer.push_back( wxPoint( dx, iDTRC ) );
corners_buffer.push_back( wxPoint( +iDTRC, iDTRC ) );
corners_buffer.push_back( wxPoint( +iDTRC, -iDTRC ) );
break;
case 3:
corners_buffer.push_back( wxPoint( -dx, -iDTRC ) );
corners_buffer.push_back( wxPoint( -dx, iDTRC ) );
corners_buffer.push_back( wxPoint( -iDTRC, iDTRC ) );
corners_buffer.push_back( wxPoint( -iDTRC, -iDTRC ) );
break;
}
// add computed polygon to group_B
if( booleng->StartPolygonAdd( GROUP_B ) )
{
for( unsigned ic = 0; ic < corners_buffer.size(); ic++ )
{
wxPoint cpos = corners_buffer[ic];
RotatePoint( &cpos, fAngle ); // Rotate according to module orientation
cpos += pad->ReturnShapePos(); // Shift origin to position
booleng->AddPoint( cpos.x, cpos.y );
have_poly_to_substract = true;
}
booleng->EndPolygonAdd();
}
}
}
}
}
/* compute copper areas */
if( have_poly_to_substract )
{
/* Add the main corrected polygon (i.e. the filled area using only one outline)
* in GroupA in Bool_Engine
*/
CopyPolygonsFromFilledPolysListToBoolengine( booleng, GROUP_A );
booleng->Do_Operation( BOOL_A_SUB_B );
/* put these areas in m_FilledPolysList */
m_FilledPolysList.clear();
CopyPolygonsFromBoolengineToFilledPolysList( booleng );
// Remove insulated islands, if any:
if( GetNet() > 0 )
Test_For_Copper_Island_And_Remove_Insulated_Islands( aPcb );
}
delete booleng;
#endif // REMOVE_UNUSED_THERMAL_STUBS
}
/** Function AddPadPolygonWithPadClearance
* Add a polygon cutout for a pad in a zone area
* Convert arcs and circles to multiple straight lines
*/
void AddPadWithClearancePolygon( Bool_Engine* aBooleng,
D_PAD& aPad, int aClearanceValue )
{
static std::vector <CPolyPt> cornerBuffer;
if( aBooleng->StartPolygonAdd( GROUP_B ) == 0 )
return;
cornerBuffer.clear();
aPad.TransformShapeWithClearanceToPolygon( cornerBuffer,
aClearanceValue,
s_CircleToSegmentsCount,
s_Correction );
for( unsigned ii = 0; ii < cornerBuffer.size(); ii++ )
aBooleng->AddPoint( cornerBuffer[ii].x, cornerBuffer[ii].y );
aBooleng->EndPolygonAdd();
#ifdef CREATE_KBOOL_KEY_FILES_FIRST_PASS
StartKeyFilePolygon( 1 );
for( unsigned ii = 0; ii < cornerBuffer.size(); ii++ )
AddKeyFilePointXY( cornerBuffer[ii].x, cornerBuffer[ii].y );
EndKeyFilePolygon();
#endif
}
/** function AddThermalReliefPadPolygon
* Add holes around a pad to create a thermal relief
* copper thickness is min (dx/2, aCopperWitdh) or min (dy/2, aCopperWitdh)
* @param aBooleng = current Bool_Engine
* @param aPad = the current pad used to create the thermal shape
* @param aThermalGap = gap in thermal shape
* @param aMinThicknessValue = min copper thickness allowed
*/
/* thermal reliefs are created as 4 polygons.
* each corner of a polygon if calculated for a pad at position 0, 0, orient 0,
* and then moved and rotated acroding to the pad position and orientation
*/
/* WARNING:
* When Kbool calculates the filled areas :
* i.e when substracting holes (thermal shapes) to the full zone area
* under certains circumstances kboll drop some holes.
* see CreateThermalReliefPadPolygon().
*/
int AddThermalReliefPadPolygon( Bool_Engine* aBooleng,
D_PAD& aPad,
int aThermalGap,
int aCopperThickness, int aMinThicknessValue )
{
static std::vector <CPolyPt> cornerBuffer;
cornerBuffer.clear();
int polycount = 0;
int thermalRot = 450;
#ifdef CREATE_KBOOL_KEY_FILES_WITH_0_DEG
thermalRot = 0;
#endif
CreateThermalReliefPadPolygon( cornerBuffer,
aPad, aThermalGap, aCopperThickness,
aMinThicknessValue,
s_CircleToSegmentsCount,
s_Correction, thermalRot );
// cornerBuffer can contain more than one polygon,
// so read cornerBuffer and verify if there is a end of polygon corner:
for( unsigned icnt = 0; icnt < cornerBuffer.size(); )
{
aBooleng->StartPolygonAdd( GROUP_B );
polycount++;
unsigned ii;
for( ii = icnt; ii < cornerBuffer.size(); ii++ )
{
aBooleng->AddPoint( cornerBuffer[ii].x, cornerBuffer[ii].y );
if( cornerBuffer[ii].end_contour )
break;
}
aBooleng->EndPolygonAdd();
#ifdef CREATE_KBOOL_KEY_FILES
StartKeyFilePolygon( 1 );
for( ii = icnt; ii < cornerBuffer.size(); ii++ )
{
AddKeyFilePointXY( cornerBuffer[ii].x, cornerBuffer[ii].y );
if( cornerBuffer[ii].end_contour )
break;
}
EndKeyFilePolygon();
#endif
icnt = ii + 1;
}
return polycount;
}
/** Function AddTrackWithClearancePolygon
* Add a polygon cutout for a track in a zone area
* Convert arcs and circles to multiple straight lines
*/
void AddTrackWithClearancePolygon( Bool_Engine* aBooleng,
TRACK& aTrack, int aClearanceValue )
{
static std::vector <CPolyPt> cornerBuffer;
cornerBuffer.clear();
aTrack.TransformShapeWithClearanceToPolygon( cornerBuffer,
aClearanceValue,
s_CircleToSegmentsCount,
s_Correction );
if( !aBooleng->StartPolygonAdd( GROUP_B ) )
return;
for( unsigned ii = 0; ii < cornerBuffer.size(); ii++ )
aBooleng->AddPoint( cornerBuffer[ii].x, cornerBuffer[ii].y );
aBooleng->EndPolygonAdd();
#ifdef CREATE_KBOOL_KEY_FILES_FIRST_PASS
StartKeyFilePolygon( 1 );
for( unsigned ii = 0; ii < cornerBuffer.size(); ii++ )
AddKeyFilePointXY( cornerBuffer[ii].x, cornerBuffer[ii].y );
EndKeyFilePolygon();
#endif
}
/** Function AddRoundedEndsSegmentPolygon
* Add a polygon cutout for a segment (with rounded ends) in a zone area
* Convert arcs to multiple straight lines
*/
void AddRoundedEndsSegmentPolygon( Bool_Engine* aBooleng,
wxPoint aStart, wxPoint aEnd,
int aWidth )
{
static std::vector <CPolyPt> cornerBuffer;
cornerBuffer.clear();
TransformRoundedEndsSegmentToPolygon( cornerBuffer,
aStart, aEnd,
s_CircleToSegmentsCount,
aWidth );
if( !aBooleng->StartPolygonAdd( GROUP_B ) )
return;
for( unsigned ii = 0; ii < cornerBuffer.size(); ii++ )
aBooleng->AddPoint( cornerBuffer[ii].x, cornerBuffer[ii].y );
aBooleng->EndPolygonAdd();
#ifdef CREATE_KBOOL_KEY_FILES
StartKeyFilePolygon( 1 );
for( unsigned ii = 0; ii < cornerBuffer.size(); ii++ )
AddKeyFilePointXY( cornerBuffer[ii].x, cornerBuffer[ii].y );
EndKeyFilePolygon();
#endif
}
/***********************************************************************************************************/
int ZONE_CONTAINER::CopyPolygonsFromFilledPolysListToBoolengine( Bool_Engine* aBoolengine,
GroupType aGroup )
/************************************************************************************************************/
/** Function CopyPolygonsFromFilledPolysListToBoolengine
* Copy (Add) polygons found in m_FilledPolysList to kbool BoolEngine
* m_FilledPolysList may have more than one polygon
* @param aBoolengine = kbool engine
* @param aGroup = group in kbool engine (GROUP_A or GROUP_B only)
* @return the corner count
*/
{
unsigned corners_count = m_FilledPolysList.size();
int count = 0;
unsigned ic = 0;
while( ic < corners_count )
{
if( aBoolengine->StartPolygonAdd( aGroup ) )
{
for( ; ic < corners_count; ic++ )
{
CPolyPt* corner = &m_FilledPolysList[ic];
aBoolengine->AddPoint( corner->x, corner->y );
count++;
if( corner->end_contour )
{
ic++;
break;
}
}
aBoolengine->EndPolygonAdd();
}
}
return count;
}
/*****************************************************************************************/
int ZONE_CONTAINER::CopyPolygonsFromBoolengineToFilledPolysList( Bool_Engine* aBoolengine )
/*****************************************************************************************/
/** Function CopyPolygonsFromBoolengineToFilledPolysList
* Copy (Add) polygons created by kbool (after Do_Operation) to m_FilledPolysList
* @param aBoolengine = kbool engine
* @return the corner count
*/
{
int count = 0;
while( aBoolengine->StartPolygonGet() )
{
CPolyPt corner( 0, 0, false );
while( aBoolengine->PolygonHasMorePoints() )
{
corner.x = (int) aBoolengine->GetPolygonXPoint();
corner.y = (int) aBoolengine->GetPolygonYPoint();
corner.end_contour = false;
// Flag this corner if starting a hole connection segment:
// This is used by draw functions to draw only useful segments (and not extra segments)
corner.utility = (aBoolengine->GetPolygonPointEdgeType() == KB_FALSE_EDGE) ? 1 : 0;
m_FilledPolysList.push_back( corner );
count++;
}
corner.end_contour = true;
m_FilledPolysList.pop_back();
m_FilledPolysList.push_back( corner );
aBoolengine->EndPolygonGet();
}
return count;
}