kicad/eeschema/hotkeys.cpp

327 lines
9.8 KiB
C++

/***************/
/* hotkeys.cpp */
/***************/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "program.h"
#include "libcmp.h"
#include "general.h"
#include "id.h"
#include "hotkeys_basic.h"
#include "protos.h"
enum hotkey_id_commnand {
HK_NOT_FOUND = 0,
HK_RESET_LOCAL_COORD,
HK_HELP,
HK_ZOOM_IN,
HK_ZOOM_OUT,
HK_ZOOM_REDRAW,
HK_ZOOM_CENTER,
HK_NEXT_SEARCH,
HK_DELETE,
HK_REPEAT_LAST,
HK_MOVEBLOCK_TO_DRAGBLOCK,
HK_ROTATE_COMPONENT,
HK_MIRROR_X_COMPONENT,
HK_MIRROR_Y_COMPONENT,
HK_ORIENT_NORMAL_COMPONENT,
HK_MOVE_COMPONENT,
HK_ADD_NEW_COMPONENT,
HK_BEGIN_WIRE
};
/* local variables */
/* Hotkey list: */
static Ki_HotkeyInfo HkBeginWire(wxT("begin Wire"), HK_BEGIN_WIRE, 'W');
static Ki_HotkeyInfo HkAddComponent(wxT("Add Component"), HK_ADD_NEW_COMPONENT, 'A');
static Ki_HotkeyInfo HkMirrorYComponent(wxT("Mirror Y Component"), HK_MIRROR_Y_COMPONENT, 'Y');
static Ki_HotkeyInfo HkMirrorXComponent(wxT("Mirror X Component"), HK_MIRROR_X_COMPONENT, 'X');
static Ki_HotkeyInfo HkOrientNormalComponent(wxT("Orient Normal Component"), HK_ORIENT_NORMAL_COMPONENT, 'N');
static Ki_HotkeyInfo HkRotateComponent(wxT("Rotate Component"), HK_ROTATE_COMPONENT, 'R');
static Ki_HotkeyInfo HkMoveComponent(wxT("Move Component"), HK_MOVE_COMPONENT, 'M');
static Ki_HotkeyInfo HkMove2Drag(wxT("Switch move block to drag block"), HK_MOVEBLOCK_TO_DRAGBLOCK, '\t');
static Ki_HotkeyInfo HkInsert(wxT("Repeat Last Item"), HK_REPEAT_LAST, WXK_INSERT);
static Ki_HotkeyInfo HkDelete(wxT("Delete Item"), HK_DELETE, WXK_DELETE);
static Ki_HotkeyInfo HkResetLocalCoord(wxT("Reset local coord."), HK_RESET_LOCAL_COORD, ' ');
static Ki_HotkeyInfo HkNextSearch(wxT("Next Search"), HK_NEXT_SEARCH, WXK_F5);
static Ki_HotkeyInfo HkZoomCenter(wxT("Zoom Center"), HK_ZOOM_CENTER, WXK_F4);
static Ki_HotkeyInfo HkZoomRedraw(wxT("Zoom Redraw"), HK_ZOOM_REDRAW, WXK_F3);
static Ki_HotkeyInfo HkZoomOut(wxT("Zoom Out"), HK_ZOOM_OUT, WXK_F2);
static Ki_HotkeyInfo HkZoomIn(wxT("Zoom In"), HK_ZOOM_IN, WXK_F1);
static Ki_HotkeyInfo HkHelp(wxT("Help: this message"), HK_HELP, '?');
// List of hotkey descriptors for schematic
static Ki_HotkeyInfo *s_Schematic_Hotkey_List[] = {
&HkHelp,
&HkZoomIn, &HkZoomOut, &HkZoomRedraw, &HkZoomCenter,
&HkNextSearch, &HkResetLocalCoord,
&HkDelete, &HkInsert, &HkMove2Drag,
&HkMoveComponent, &HkAddComponent,
&HkRotateComponent, &HkMirrorXComponent, &HkMirrorYComponent, & HkOrientNormalComponent,
&HkBeginWire,
NULL
};
// Library editor:
static Ki_HotkeyInfo HkInsertPin(wxT("Repeat Pin"), HK_REPEAT_LAST, WXK_INSERT);
// List of hotkey descriptors for libray editor
static Ki_HotkeyInfo *s_LibEdit_Hotkey_List[] =
{
&HkHelp,
&HkZoomIn, &HkZoomOut, &HkZoomRedraw, &HkZoomCenter,
&HkResetLocalCoord,
&HkInsertPin,
NULL
};
/***********************************************************/
void WinEDA_SchematicFrame::OnHotKey(wxDC * DC, int hotkey,
EDA_BaseStruct * DrawStruct)
/***********************************************************/
/* Hot keys. Some commands are relatives to the item under the mouse cursor
Commands are case insensitive
Zoom commands are not managed here
*/
{
bool PopupOn = m_CurrentScreen->GetCurItem() &&
m_CurrentScreen->GetCurItem()->m_Flags;
bool RefreshToolBar = FALSE; // We must refresh tool bar when the undo/redo tool state is modified
if ( hotkey == 0 ) return;
wxPoint MousePos = m_CurrentScreen->m_MousePosition;
// Remap the control key Ctrl A (0x01) to GR_KB_CTRL + 'A' (easier to handle...)
if ( (hotkey & GR_KB_CTRL) != 0 ) hotkey += 'A' - 1;
/* Convert lower to upper case (the usual toupper function has problem with non ascii codes like function keys */
if( (hotkey >= 'a') && (hotkey <= 'z') ) hotkey += 'A' - 'a';
// Search command from key :
int CommandCode = GetCommandCodeFromHotkey(hotkey, s_Schematic_Hotkey_List);
switch( CommandCode )
{
default:
case HK_NOT_FOUND:
return;
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList(this, s_Schematic_Hotkey_List);
break;
case HK_ZOOM_IN:
case HK_ZOOM_OUT:
case HK_ZOOM_REDRAW:
case HK_ZOOM_CENTER:
case HK_RESET_LOCAL_COORD:
break;
case HK_MOVEBLOCK_TO_DRAGBLOCK: // Switch to drag mode, when block moving
HandleBlockEndByPopUp(BLOCK_DRAG, DC);
break;
case HK_DELETE:
if ( PopupOn ) break;
RefreshToolBar = LocateAndDeleteItem(this, DC);
m_CurrentScreen->SetModify();
m_CurrentScreen->SetCurItem( NULL);
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
break;
case HK_REPEAT_LAST:
if ( g_ItemToRepeat && (g_ItemToRepeat->m_Flags == 0) )
{
RepeatDrawItem(DC);
}
else wxBell();
break;
case HK_NEXT_SEARCH :
if ( g_LastSearchIsMarker ) WinEDA_SchematicFrame::FindMarker(1);
else FindSchematicItem(wxEmptyString, 2);
break;
case HK_ADD_NEW_COMPONENT: // Add component
if ( DrawStruct && DrawStruct->m_Flags ) break;
// switch to m_ID_current_state = ID_COMPONENT_BUTT;
if ( m_ID_current_state != ID_COMPONENT_BUTT ) SetToolID( ID_COMPONENT_BUTT, wxCURSOR_PENCIL, _("Add Component"));
OnLeftClick(DC, MousePos);
break;
case HK_BEGIN_WIRE: // Add wire
if ( DrawStruct ) // An item is selected. If edited and not a wire, a new command is not possible
{
if ( DrawStruct->m_Flags ) // Item selected and edition in progress
{
if (DrawStruct->m_StructType == DRAW_SEGMENT_STRUCT_TYPE )
{
EDA_DrawLineStruct * segment = (EDA_DrawLineStruct *)DrawStruct;
if ( segment->m_Layer != LAYER_WIRE ) break;
}
else break;
}
}
// switch to m_ID_current_state = ID_WIRE_BUTT;
if ( m_ID_current_state != ID_WIRE_BUTT ) SetToolID( ID_WIRE_BUTT, wxCURSOR_PENCIL, _("Add Wire"));
OnLeftClick(DC, MousePos);
break;
case HK_ROTATE_COMPONENT: // Component Rotation
if ( DrawStruct == NULL )
{
DrawStruct = PickStruct( GetScreen()->m_Curseur,
GetScreen()->EEDrawList, LIBITEM|TEXTITEM|LABELITEM );
if ( DrawStruct == NULL ) break;
if ( DrawStruct->m_StructType == DRAW_LIB_ITEM_STRUCT_TYPE )
DrawStruct = LocateSmallestComponent( GetScreen() );
if ( DrawStruct == NULL ) break;
}
switch (DrawStruct->m_StructType)
{
case DRAW_LIB_ITEM_STRUCT_TYPE:
if ( DrawStruct->m_Flags == 0 )
{
SaveCopyInUndoList(DrawStruct, IS_CHANGED);
RefreshToolBar = TRUE;
}
CmpRotationMiroir(
(EDA_SchComponentStruct *) DrawStruct, DC, CMP_ROTATE_COUNTERCLOCKWISE );
break;
case DRAW_TEXT_STRUCT_TYPE:
case DRAW_LABEL_STRUCT_TYPE:
case DRAW_GLOBAL_LABEL_STRUCT_TYPE:
if ( DrawStruct->m_Flags == 0 )
{
SaveCopyInUndoList(DrawStruct, IS_CHANGED);
RefreshToolBar = TRUE;
}
ChangeTextOrient( (DrawTextStruct*)DrawStruct, DC);
break;
}
break;
case HK_MIRROR_Y_COMPONENT: // Mirror Y (Component)
if ( DrawStruct == NULL )
DrawStruct = LocateSmallestComponent( GetScreen() );
if ( DrawStruct )
{
if ( DrawStruct->m_Flags == 0 )
{
SaveCopyInUndoList(DrawStruct, IS_CHANGED);
RefreshToolBar = TRUE;
}
CmpRotationMiroir(
(EDA_SchComponentStruct *) DrawStruct, DC, CMP_MIROIR_Y );
}
break;
case HK_MIRROR_X_COMPONENT: // Mirror X (Component)
if ( DrawStruct == NULL )
DrawStruct = LocateSmallestComponent( GetScreen() );
if ( DrawStruct )
{
if ( DrawStruct->m_Flags == 0 )
{
SaveCopyInUndoList(DrawStruct, IS_CHANGED);
RefreshToolBar = TRUE;
}
CmpRotationMiroir(
(EDA_SchComponentStruct *) DrawStruct, DC, CMP_MIROIR_X );
}
break;
case HK_ORIENT_NORMAL_COMPONENT: // Orient 0, no mirror (Component)
if ( DrawStruct == NULL )
DrawStruct = LocateSmallestComponent( GetScreen() );
if ( DrawStruct )
{
if ( DrawStruct->m_Flags == 0 )
{
SaveCopyInUndoList(DrawStruct, IS_CHANGED);
RefreshToolBar = TRUE;
}
CmpRotationMiroir(
(EDA_SchComponentStruct *) DrawStruct, DC, CMP_NORMAL );
TestDanglingEnds(m_CurrentScreen->EEDrawList, DC);
}
break;
case HK_MOVE_COMPONENT: // Start move Component
if ( PopupOn ) break;
if ( DrawStruct == NULL )
DrawStruct = LocateSmallestComponent( GetScreen() );
if ( DrawStruct && (DrawStruct->m_Flags ==0) )
{
m_CurrentScreen->SetCurItem(DrawStruct);
Process_Move_Item(m_CurrentScreen->GetCurItem(), DC);
}
break;
}
if ( RefreshToolBar ) SetToolbars();
}
/***********************************************************/
void WinEDA_LibeditFrame::OnHotKey(wxDC * DC, int hotkey,
EDA_BaseStruct * DrawStruct)
/***********************************************************/
/* Hot keys for the component editot. Some commands are relatives to the item under the mouse cursor
Commands are case insensitive
Zoom commands are not managed here
*/
{
bool RefreshToolBar = FALSE; // We must refresh tool bar when the undo/redo tool state is modified
if ( hotkey == 0 ) return;
wxPoint MousePos = m_CurrentScreen->m_MousePosition;
/* Convert lower to upper case (the usual toupper function has problem with non ascii codes like function keys */
if( (hotkey >= 'a') && (hotkey <= 'z') ) hotkey += 'A' - 'a';
int CommandCode = GetCommandCodeFromHotkey(hotkey, s_LibEdit_Hotkey_List);
switch( CommandCode )
{
default:
case HK_NOT_FOUND:
return;
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList(this, s_LibEdit_Hotkey_List);
break;
case HK_ZOOM_IN:
case HK_ZOOM_OUT:
case HK_ZOOM_REDRAW:
case HK_ZOOM_CENTER:
case HK_RESET_LOCAL_COORD:
break;
case HK_REPEAT_LAST:
if ( LibItemToRepeat && (LibItemToRepeat->m_Flags == 0) &&
(LibItemToRepeat->m_StructType == COMPONENT_PIN_DRAW_TYPE) )
{
RepeatPinItem(DC, (LibDrawPin*) LibItemToRepeat);
}
else wxBell();
break;
}
if ( RefreshToolBar ) SetToolbars();
}