kicad/include/pcbstruct.h

437 lines
16 KiB
C++

/**************************************************************/
/* pcbstruct.h : definition des structures de donnees type PCB */
/**************************************************************/
#ifndef PCBSTRUCT_H
#define PCBSTRUCT_H
#include "base_struct.h"
// Definitions relatives aux libariries
#define ENTETE_LIBRAIRIE "PCBNEW-LibModule-V1"
#define ENTETE_LIBDOC "PCBNEW-LibDoc----V1"
#define L_ENTETE_LIB 18
#define EXT_CMP wxT( ".emp" )
#define EXT_CMP_MASK wxT( "*.emp" )
#define EXT_DOC wxT( ".mdc" )
/* Bits indicateurs du membre .Status, pour pistes, modules... */
#define FLAG1 0x2000 /* flag libre pour calculs locaux */
#define FLAG0 0x1000 /* flag libre pour calculs locaux */
#define BEGIN_ONPAD 0x800 /* flag indiquant un debut de segment sur pad */
#define END_ONPAD 0x400 /* flag indiquant une fin de segment sur pad */
#define BUSY 0x0200 /* flag indiquant que la structure a deja
* ete examinee, dans certaines routines */
#define DELETED 0x0100 /* Bit flag de Status pour structures effacee
* et mises en chaine "DELETED" */
#define NO_TRACE 0x80 /* l'element ne doit pas etre affiche */
#define SURBRILL 0x20 /* element en surbrillance */
#define DRAG 0x10 /* segment en mode drag */
#define EDIT 0x8 /* element en cours d'edition */
#define SEGM_FIXE 0x04 /* segment FIXE ( pas d'effacement global ) */
#define SEGM_AR 0x02 /* segment Auto_Route */
#define CHAIN 0x01 /* segment marque */
/*************************************/
/* constantes de gestion des couches */
/*************************************/
#define CUIVRE_LAYER 0x00000001 /* Bit layer cuivre */
#define LAYER_2 0x00000002 /* Bit layer 2 */
#define LAYER_3 0x00000004 /* Bit layer 3 */
#define LAYER_4 0x00000008 /* Bit layer 4 */
#define LAYER_5 0x00000010 /* Bit layer 5 */
#define LAYER_6 0x00000020 /* Bit layer 6 */
#define LAYER_7 0x00000040 /* Bit layer 7 */
#define LAYER_8 0x00000080 /* Bit layer 8 */
#define LAYER_9 0x00000100 /* Bit layer 9 */
#define LAYER_10 0x00000200 /* Bit layer 10 */
#define LAYER_11 0x00000400 /* Bit layer 11 */
#define LAYER_12 0x00000800 /* Bit layer 12 */
#define LAYER_13 0x00001000 /* Bit layer 13 */
#define LAYER_14 0x00002000 /* Bit layer 14 */
#define LAYER_15 0x00004000 /* Bit layer 15 */
#define CMP_LAYER 0x00008000 /* Bit layer cmp */
#define ADHESIVE_LAYER_CU 0x00010000
#define ADHESIVE_LAYER_CMP 0x00020000
#define SOLDERPASTE_LAYER_CU 0x00040000
#define SOLDERPASTE_LAYER_CMP 0x00080000
#define SILKSCREEN_LAYER_CU 0x00100000
#define SILKSCREEN_LAYER_CMP 0x00200000
#define SOLDERMASK_LAYER_CU 0x00400000
#define SOLDERMASK_LAYER_CMP 0x00800000
#define DRAW_LAYER 0x01000000
#define COMMENT_LAYER 0x02000000
#define ECO1_LAYER 0x04000000
#define ECO2_LAYER 0x08000000
#define EDGE_LAYER 0x10000000
// extra bits 0xE0000000
/* masques generaux : */
#define ALL_LAYERS 0x1FFFFFFF
#define ALL_NO_CU_LAYERS 0x1FFF0000
#define ALL_CU_LAYERS 0x0000FFFF
#define INTERNAL_LAYERS 0x00007FFE /* Bits layers internes */
#define EXTERNAL_LAYERS 0x00008001
/* Flags pour les couches cuivres */
/* numero des couches particulieres */
#define LAYER_CUIVRE_N 0
#define CUIVRE_N 0
#define LAYER_N_2 1 /* Numero layer 2 */
#define LAYER_N_3 2 /* Numero layer 3 */
#define LAYER_N_4 3 /* Numero layer 4 */
#define LAYER_N_5 4 /* Numero layer 5 */
#define LAYER_N_6 5 /* Numero layer 6 */
#define LAYER_N_7 6 /* Numero layer 7 */
#define LAYER_N_8 7 /* Numero layer 8 */
#define LAYER_N_9 8 /* Numero layer 9 */
#define LAYER_N_10 9 /* Numero layer 10 */
#define LAYER_N_11 10 /* Numero layer 11 */
#define LAYER_N_12 11 /* Numero layer 12 */
#define LAYER_N_13 12 /* Numero layer 13 */
#define LAYER_N_14 13 /* Numero layer 14 */
#define LAYER_N_15 14 /* Numero layer 15 */
#define LAYER_CMP_N 15
#define CMP_N 15
#define NB_COPPER_LAYERS (CMP_N + 1)
#define FIRST_NO_COPPER_LAYER 16
#define ADHESIVE_N_CU 16
#define ADHESIVE_N_CMP 17
#define SOLDERPASTE_N_CU 18
#define SOLDERPASTE_N_CMP 19
#define SILKSCREEN_N_CU 20
#define SILKSCREEN_N_CMP 21
#define SOLDERMASK_N_CU 22
#define SOLDERMASK_N_CMP 23
#define DRAW_N 24
#define COMMENT_N 25
#define ECO1_N 26
#define ECO2_N 27
#define EDGE_N 28
#define LAST_NO_COPPER_LAYER 28
#define NB_LAYERS (EDGE_N + 1)
#define LAYER_COUNT 32
/* Forme des segments (pistes, contours ..) ( parametre .shape ) */
enum Track_Shapes {
S_SEGMENT = 0, /* segment rectiligne */
S_RECT, /* segment forme rect (i.e. bouts non arrondis) */
S_ARC, /* segment en arc de cercle (bouts arrondis)*/
S_CIRCLE, /* segment en cercle (anneau)*/
S_ARC_RECT, /* segment en arc de cercle (bouts droits) (GERBER)*/
S_SPOT_OVALE, /* spot ovale (for GERBER)*/
S_SPOT_CIRCLE, /* spot rond (for GERBER)*/
S_SPOT_RECT, /* spot rect (for GERBER)*/
S_POLYGON /* polygon shape */
};
/* Forward declaration */
class MODULE;
class EQUIPOT;
class MARQUEUR;
class TRACK;
class D_PAD;
struct CHEVELU;
class Ki_PageDescr;
class DrawBlockStruct;
// Class for handle current printed board design settings
#define HIST0RY_NUMBER 8
class EDA_BoardDesignSettings
{
public:
int m_CopperLayerCount; // Number of copper layers for this design
int m_ViaDrill; // via drill (for the entire board)
int m_CurrentViaSize; // Current via size
int m_ViaSizeHistory[HIST0RY_NUMBER]; // Last HIST0RY_NUMBER used via sizes
int m_CurrentViaType; // via type (BLIND, TROUGHT ...), bits 1 and 2 (not 0 and 1)
int m_CurrentTrackWidth; // current track width
int m_TrackWidhtHistory[HIST0RY_NUMBER]; // Last HIST0RY_NUMBER used track widths
int m_DrawSegmentWidth; // current graphic line width (not EDGE layer)
int m_EdgeSegmentWidth; // current graphic line width (EDGE layer only)
int m_PcbTextWidth; // current Pcb (not module) Text width
wxSize m_PcbTextSize; // current Pcb (not module) Text size
int m_TrackClearence; // track to track and track to pads clearance
int m_ZoneClearence; // zone to track and zone to pads clearance
int m_MaskMargin; // Solder mask margin
// Color options for screen display of the Printed Board:
int m_PcbGridColor; // Grid color
int m_LayerColor[32]; // Layer colors (tracks and graphic items)
int m_ViaColor[4]; // Via color (depending on is type)
int m_ModuleTextCMPColor; // Text module color for modules on the COMPONENT layer
int m_ModuleTextCUColor; // Text module color for modules on the COPPER layer
int m_ModuleTextNOVColor; // Text module color for "invisible" texts (must be BLACK if really not displayed)
int m_AnchorColor; // Anchor color for modules and texts
int m_PadCUColor; // Pad color for the COMPONENT side of the pad
int m_PadCMPColor; // Pad color for the COPPER side of the pad
// Pad color for the pads of both sides is m_PadCUColor OR m_PadCMPColor (in terms of colors)
int m_RatsnestColor; // Ratsnest color
public:
EDA_BoardDesignSettings( void );
};
// Values for m_DisplayViaMode member:
enum DisplayViaMode {
VIA_HOLE_NOT_SHOW = 0,
VIA_SPECIAL_HOLE_SHOW,
ALL_VIA_HOLE_SHOW,
OPT_VIA_HOLE_END
};
class BOARD : public EDA_BaseStruct
{
public:
WinEDA_BasePcbFrame* m_PcbFrame; // Window de visualisation
EDA_Rect m_BoundaryBox; // Limites d'encadrement du PCB
int m_Unused;
int m_Status_Pcb; // Mot d'etat: Bit 1 = Chevelu calcule
EDA_BoardDesignSettings* m_BoardSettings; // Link to current design settings
int m_NbNets; // Nombre de nets (equipotentielles)
int m_NbNodes; // nombre de pads connectes
int m_NbLinks; // nombre de chevelus
int m_NbLoclinks; // nombre de chevelus dans Local ratsnest
// minimal de pistes a tracer
int m_NbNoconnect; // nombre de chevelus actifs
int m_NbSegmTrack; // nombre d'elements de type segments de piste
int m_NbSegmZone; // nombre d'elements de type segments de zone
EDA_BaseStruct* m_Drawings; // pointeur sur liste drawings
MODULE* m_Modules; // pointeur sur liste zone modules
EQUIPOT* m_Equipots; // pointeur liste zone equipot
TRACK* m_Track; // pointeur relatif zone piste
TRACK* m_Zone; // pointeur tableau zone zones de cuivre
D_PAD** m_Pads; // pointeur liste d'acces aux pads
int m_NbPads; // nombre total de pads
CHEVELU* m_Ratsnest; // pointeur liste des chevelus
CHEVELU* m_LocalRatsnest; // pointeur liste des chevelus d'un module
EDGE_ZONE* m_CurrentLimitZone; /* pointeur sur la liste des segments
* de delimitation de la zone en cours de trace */
BOARD( EDA_BaseStruct* StructFather, WinEDA_BasePcbFrame* frame );
~BOARD( void );
/* supprime du chainage la structure Struct */
void UnLink( void );
/* Routines de calcul des nombres de segments pistes et zones */
int GetNumSegmTrack( void );
int GetNumSegmZone( void );
int GetNumNoconnect( void ); // retourne le nombre de connexions manquantes
int GetNumRatsnests( void ); // retourne le nombre de chevelus
int GetNumNodes( void ); // retourne le nombre de pads a netcode > 0
// Calcul du rectangle d'encadrement:
bool ComputeBoundaryBox( void );
/**
* Function Visit
* may be re-implemented for each derived class in order to handle
* all the types given by its member data. Implementations should call
* inspector->Inspect() on types in scanTypes[], and may use IterateForward()
* to do so on lists of such data.
* @param inspector An INSPECTOR instance to use in the inspection.
* @param testData Arbitrary data used by the inspector.
* @param scanTypes Which KICAD_T types are of interest and the order
* is significant too, terminated by EOT.
* @return SEARCH_RESULT - SEARCH_QUIT if the Iterator is to stop the scan,
* else SCAN_CONTINUE, and determined by the inspector.
*/
SEARCH_RESULT Visit( INSPECTOR* inspector, const void* testData,
const KICAD_T scanTypes[] );
/**
* Function FindPadOrModule
* searches for either a pad or module, giving precedence to pads.
* Any Pad or Module on the desired layer that HitTest()s true will be
* returned, otherwise any visible Pad or Module on any other layer.
* The provided layer must be visible.
* @param refPos The wxPoint to hit-test.
* @return EDA_BaseStruct* - if a direct hit, else NULL.
*/
EDA_BaseStruct* FindPadOrModule( const wxPoint& refPos, int layer );
#if defined(DEBUG)
/**
* Function GetClass
* returns the class name.
* @return wxString
*/
wxString GetClass() const
{
return wxT( "BOARD" );
}
/**
* Function Show
* is used to output the object tree, currently for debugging only.
* @param nestLevel An aid to prettier tree indenting, and is the level
* of nesting of this object within the overall tree.
* @param os The ostream& to output to.
*/
void Show( int nestLevel, std::ostream& os );
#endif
};
/* Description d'un ecran */
class PCB_SCREEN : public BASE_SCREEN
{
public:
int m_Active_Layer; /* ref couche active */
int m_Route_Layer_TOP; /* ref couches actives */
int m_Route_Layer_BOTTOM; /* pour placement vias et routage 2 couches */
public:
PCB_SCREEN( int idscreen );
~PCB_SCREEN( void );
PCB_SCREEN* Next( void ) { return (PCB_SCREEN*) Pnext; }
void Init( void );
void SetNextZoom( void );
void SetPreviousZoom( void );
void SetLastZoom( void );
};
/***************************/
/* Description des Modules */
/***************************/
#include "class_pad.h" /* Description des Pastilles :*/
#include "class_edge_mod.h"
#include "class_text_mod.h"
#include "class_module.h"
#include "class_equipot.h"
/***********************************/
/* Description des elements du PCB */
/***********************************/
class DRAWSEGMENT : public EDA_BaseLineStruct
{
public:
int m_Shape; // forme: Segment , Cercle..
int m_Type; // numero de sous type ( cotation.. )
int m_Angle; // pour les arcs: "longueur" de l'arc en 1/10 deg
public:
DRAWSEGMENT( EDA_BaseStruct* StructFather, DrawStructureType idtype = TYPEDRAWSEGMENT );
~DRAWSEGMENT( void );
// Read/write data
bool WriteDrawSegmentDescr( FILE* File );
bool ReadDrawSegmentDescr( FILE* File, int* LineNum );
/* supprime du chainage la structure Struct */
void UnLink( void );
void Copy( DRAWSEGMENT* source );
/**
* Function HitTest
* tests if the given wxPoint is within the bounds of this object.
* @param ref_pos A wxPoint to test
* @return bool - true if a hit, else false
*/
bool HitTest( const wxPoint& ref_pos );
#if defined(DEBUG)
/**
* Function GetClass
* returns the class name.
* @return wxString
*/
wxString GetClass() const
{
return wxT("pgraphic");
}
#endif
};
#include "class_pcb_text.h"
#include "class_cotation.h"
#include "class_mire.h"
#include "class_track.h"
/*******************/
/* class EDGE_ZONE */
/*******************/
class EDGE_ZONE : public DRAWSEGMENT
{
public:
EDGE_ZONE( EDA_BaseStruct* StructFather );
EDGE_ZONE( const EDGE_ZONE& edgezone );
~EDGE_ZONE( void );
};
/************************************/
/* Gestion des marqueurs sur le PCB */
/************************************/
class MARQUEUR : public EDA_BaseStruct
{
/* Description d'un marqueur */
public:
wxPoint m_Pos;
char* m_Bitmap; /* Shape (bitmap) */
int m_Type;
int m_Color; /* couleur */
wxString m_Diag; /* Associated text (comment) */
public:
MARQUEUR( EDA_BaseStruct* StructFather );
~MARQUEUR( void );
void UnLink( void );
void Draw( WinEDA_DrawPanel* panel, wxDC* DC, int DrawMode );
};
class DISPLAY_OPTIONS
{
public:
bool DisplayPadFill;
bool DisplayPadNum;
bool DisplayPadNoConn;
bool DisplayPadIsol;
int DisplayModEdge;
int DisplayModText;
bool DisplayPcbTrackFill; /* FALSE = sketch , TRUE = filled */
bool DisplayTrackIsol;
int m_DisplayViaMode; /* 0 do not show via hole,
* 1 show via hole for non default value
* 2 show all via hole */
bool DisplayPolarCood;
bool DisplayZones;
bool Show_Modules_Cmp;
bool Show_Modules_Cu;
int DisplayDrawItems;
bool ContrastModeDisplay;
public:
DISPLAY_OPTIONS( void );
};
#endif /* PCBSTRUCT_H */