kicad/eeschema/class_text-label.h

378 lines
13 KiB
C++

/********************************************/
/* Definitions for the EESchema program: */
/********************************************/
#ifndef CLASS_TEXT_LABEL_H
#define CLASS_TEXT_LABEL_H
#include "macros.h"
#include "base_struct.h"
/* Type of SCH_HIERLABEL and SCH_GLOBALLABEL
* mainly used to handle the graphic associated shape
*/
typedef enum {
NET_INPUT,
NET_OUTPUT,
NET_BIDI,
NET_TRISTATE,
NET_UNSPECIFIED,
NET_TMAX /* Last value */
} TypeSheetLabel;
extern const char* SheetLabelType[]; /* names of types of labels */
class SCH_TEXT : public SCH_ITEM,
public EDA_TextStruct
{
public:
int m_Layer;
int m_Shape;
bool m_IsDangling; // true if not connected (used to draw the "not
// connected" symbol
protected:
int m_SchematicOrientation; /* orientation of texts (comments) and
* labels in schematic
* 0 = normal (horizontal, left
* justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified).
* This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the
* mirrored position of up
* this is perhaps a duplicate of m_Orient
* and m_HJustified or m_VJustified,
* but is more easy to handle that 3
* parameters in editions, Reading and
* Saving file
*/
public:
SCH_TEXT( const wxPoint& pos = wxPoint( 0, 0 ),
const wxString& text = wxEmptyString,
KICAD_T aType = TYPE_SCH_TEXT );
~SCH_TEXT() { }
virtual wxString GetClass() const
{
return wxT( "SCH_TEXT" );
}
/** function SetTextOrientAndJustifyParmeters
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation (for a text )
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetSchematicTextOrientation( int aSchematicOrientation );
int GetSchematicTextOrientation() { return m_SchematicOrientation; }
/** function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset();
SCH_TEXT* GenCopy();
virtual void Draw( WinEDA_DrawPanel* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
void SwapData( SCH_TEXT* copyitem );
void Place( WinEDA_SchematicFrame* frame, wxDC* DC );
/** Function HitTest
* @return true if the point aPosRef is within item area
* @param aPosRef = a wxPoint to test
*/
bool HitTest( const wxPoint& aPosRef );
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_Rect GetBoundingBox();
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/** Function GetPenSize
* @return the size of the "pen" that be used to draw or plot this item
*/
int GetPenSize();
// Geometric transforms (used in block operations):
/** virtual function Move
* move item to a new position.
* @param aMoveVector = the displacement vector
*/
virtual void Move( const wxPoint& aMoveVector )
{
m_Pos += aMoveVector;
}
/** virtual function Mirror_Y
* mirror item relative to an Y axis
* @param aYaxis_position = the y axis position
*/
virtual void Mirror_Y( int aYaxis_position );
#if defined(DEBUG)
void Show( int nestLevel, std::ostream& os );
#endif
};
class SCH_LABEL : public SCH_TEXT
{
public:
SCH_LABEL( const wxPoint& pos = wxPoint( 0, 0 ),
const wxString& text = wxEmptyString );
~SCH_LABEL() { }
virtual void Draw( WinEDA_DrawPanel* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
virtual wxString GetClass() const
{
return wxT( "SCH_LABEL" );
}
/** function SetTextOrientAndJustifyParmeters
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation (for a label)
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetSchematicTextOrientation( int aSchematicOrientation );
/** function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset();
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_Rect GetBoundingBox();
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
};
class SCH_GLOBALLABEL : public SCH_TEXT
{
public:
SCH_GLOBALLABEL( const wxPoint& pos = wxPoint( 0, 0 ),
const wxString& text = wxEmptyString );
~SCH_GLOBALLABEL() { }
virtual void Draw( WinEDA_DrawPanel* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
virtual wxString GetClass() const
{
return wxT( "SCH_GLOBALLABEL" );
}
/** function SetTextOrientAndJustifyParmeters
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetSchematicTextOrientation( int aSchematicOrientation );
/** function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset();
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/** Function HitTest
* @return true if the point aPosRef is within item area
* @param aPosRef = a wxPoint to test
*/
bool HitTest( const wxPoint& aPosRef );
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_Rect GetBoundingBox();
/** function CreateGraphicShape
* Calculates the graphic shape (a polygon) associated to the text
* @param aCorner_list = a buffer to fill with polygon corners coordinates
* @param Pos = Position of the shape
*/
void CreateGraphicShape( std::vector <wxPoint>& aCorner_list,
const wxPoint& Pos );
/** virtual function Mirror_Y
* mirror item relative to an Y axis
* @param aYaxis_position = the y axis position
*/
virtual void Mirror_Y( int aYaxis_position );
};
class SCH_HIERLABEL : public SCH_TEXT
{
public:
SCH_HIERLABEL( const wxPoint& pos = wxPoint( 0, 0 ),
const wxString& text = wxEmptyString );
~SCH_HIERLABEL() { }
virtual void Draw( WinEDA_DrawPanel* panel,
wxDC* DC,
const wxPoint& offset,
int draw_mode,
int Color = -1 );
virtual wxString GetClass() const
{
return wxT( "SCH_HIERLABEL" );
}
/** function SetTextOrientAndJustifyParmeters
* Set m_SchematicOrientation, and initialize
* m_orient,m_HJustified and m_VJustified, according to the value of
* m_SchematicOrientation
* must be called after changing m_SchematicOrientation
* @param aSchematicOrientation =
* 0 = normal (horizontal, left justified).
* 1 = up (vertical)
* 2 = (horizontal, right justified). This can be seen as the mirrored
* position of 0
* 3 = bottom . This can be seen as the mirrored position of up
*/
virtual void SetSchematicTextOrientation( int aSchematicOrientation );
/** function GetSchematicTextOffset (virtual)
* @return the offset between the SCH_TEXT position and the text itself
* position
* This offset depend on orientation, and the type of text
* (room to draw an associated graphic symbol, or put the text above a
* wire)
*/
virtual wxPoint GetSchematicTextOffset();
/** function CreateGraphicShape
* Calculates the graphic shape (a polygon) associated to the text
* @param aCorner_list = a buffer to fill with polygon corners coordinates
* @param Pos = Postion of the shape
*/
void CreateGraphicShape( std::vector <wxPoint>& aCorner_list,
const wxPoint& Pos );
/**
* Function Save
* writes the data structures for this object out to a FILE in "*.sch"
* format.
* @param aFile The FILE to write to.
* @return bool - true if success writing else false.
*/
bool Save( FILE* aFile ) const;
/** Function HitTest
* @return true if the point aPosRef is within item area
* @param aPosRef = a wxPoint to test
*/
bool HitTest( const wxPoint& aPosRef );
/**
* Function GetBoundingBox
* returns the orthogonal, bounding box of this object for display purposes.
* This box should be an enclosing perimeter for visible components of this
* object, and the units should be in the pcb or schematic coordinate system.
* It is OK to overestimate the size by a few counts.
*/
EDA_Rect GetBoundingBox();
/** virtual function Mirror_Y
* mirror item relative to an Y axis
* @param aYaxis_position = the y axis position
*/
virtual void Mirror_Y( int aYaxis_position );
};
#endif /* CLASS_TEXT_LABEL_H */