kicad/pcbnew/dialogs/dialog_print_using_printer.cpp

503 lines
16 KiB
C++

/****************************************/
/* File: dialog_print_using_printer.cpp */
/****************************************/
// Set this to 1 if you want to test PostScript printing under MSW.
//#define wxTEST_POSTSCRIPT_IN_MSW 1
#include <fctsys.h>
#include <appl_wxstruct.h>
#include <class_drawpanel.h>
#include <confirm.h>
#include <wxPcbStruct.h>
#include <base_units.h>
#include <printout_controler.h>
#include <pcbnew.h>
#include <pcbplot.h>
#include <class_board.h>
#include <dialog_print_using_printer_base.h>
#define PEN_WIDTH_MAX_VALUE ( KiROUND( 5 * IU_PER_MM ) )
#define PEN_WIDTH_MIN_VALUE ( KiROUND( 0.005 * IU_PER_MM ) )
extern int g_DrawDefaultLineThickness;
// Local variables
static LAYER_MSK s_SelectedLayers;
static double s_ScaleList[] =
{ 0, 0.5, 0.7, 0.999, 1.0, 1.4, 2.0, 3.0, 4.0 };
// Define min et max reasonnable values for print scale
#define MIN_SCALE 0.01
#define MAX_SCALE 100.0
// static print data and page setup data, to remember settings during the session
static wxPrintData* s_PrintData;
static wxPageSetupDialogData* s_pageSetupData = (wxPageSetupDialogData*) NULL;
static PRINT_PARAMETERS s_Parameters;
/**
* Dialog to print schematic. Class derived from DIALOG_PRINT_USING_PRINTER_base
* created by wxFormBuilder
*/
class DIALOG_PRINT_USING_PRINTER : public DIALOG_PRINT_USING_PRINTER_base
{
public:
DIALOG_PRINT_USING_PRINTER( PCB_EDIT_FRAME* parent );
bool IsMirrored() { return m_Print_Mirror->IsChecked(); }
bool ExcludeEdges() { return m_Exclude_Edges_Pcb->IsChecked(); }
bool PrintUsingSinglePage() { return m_PagesOption->GetSelection(); }
int SetLayerMaskFromListSelection();
private:
PCB_EDIT_FRAME* m_parent;
wxConfig* m_config;
wxCheckBox* m_BoxSelectLayer[32];
static bool m_ExcludeEdgeLayer;
void OnCloseWindow( wxCloseEvent& event );
void OnPageSetup( wxCommandEvent& event );
void OnPrintPreview( wxCommandEvent& event );
void OnPrintButtonClick( wxCommandEvent& event );
void OnScaleSelectionClick( wxCommandEvent& event );
void OnButtonCancelClick( wxCommandEvent& event ) { Close(); }
void SetPrintParameters( );
void SetPenWidth();
void InitValues( );
};
bool DIALOG_PRINT_USING_PRINTER::m_ExcludeEdgeLayer;
void PCB_EDIT_FRAME::ToPrinter( wxCommandEvent& event )
{
const PAGE_INFO& pageInfo = GetPageSettings();
if( s_PrintData == NULL ) // First print
{
s_PrintData = new wxPrintData();
if( !s_PrintData->Ok() )
{
DisplayError( this, _( "Error Init Printer info" ) );
}
s_PrintData->SetQuality( wxPRINT_QUALITY_HIGH ); // Default resolution = HIGH;
}
if( s_pageSetupData == NULL )
s_pageSetupData = new wxPageSetupDialogData( *s_PrintData );
s_pageSetupData->SetPaperId( pageInfo.GetPaperId() );
s_pageSetupData->GetPrintData().SetOrientation( pageInfo.GetWxOrientation() );
if( pageInfo.IsCustom() )
{
if( pageInfo.IsPortrait() )
s_pageSetupData->SetPaperSize( wxSize( Mils2mm( pageInfo.GetWidthMils() ),
Mils2mm( pageInfo.GetHeightMils() ) ) );
else
s_pageSetupData->SetPaperSize( wxSize( Mils2mm( pageInfo.GetHeightMils() ),
Mils2mm( pageInfo.GetWidthMils() ) ) );
}
*s_PrintData = s_pageSetupData->GetPrintData();
DIALOG_PRINT_USING_PRINTER dlg( this );
dlg.ShowModal();
}
DIALOG_PRINT_USING_PRINTER::DIALOG_PRINT_USING_PRINTER( PCB_EDIT_FRAME* parent ) :
DIALOG_PRINT_USING_PRINTER_base( parent )
{
m_parent = parent;
m_config = wxGetApp().GetSettings();
InitValues( );
if( GetSizer() )
{
GetSizer()->SetSizeHints( this );
}
Center();
#ifdef __WXMAC__
/* Problems with modal on wx-2.9 - Anyway preview is standard for OSX */
m_buttonPreview->Hide();
#endif
}
void DIALOG_PRINT_USING_PRINTER::InitValues( )
{
wxString msg;
BOARD* board = m_parent->GetBoard();
s_Parameters.m_PageSetupData = s_pageSetupData;
// Create layer list.
LAYER_NUM layer;
wxString layerKey;
for( layer = FIRST_LAYER; layer < NB_PCB_LAYERS; ++layer )
{
if( !board->IsLayerEnabled( layer ) )
m_BoxSelectLayer[layer] = NULL;
else
m_BoxSelectLayer[layer] =
new wxCheckBox( this, -1, board->GetLayerName( layer ) );
}
// Add wxCheckBoxes in layers lists dialog
// List layers in same order than in setup layers dialog
// (Front or Top to Back or Bottom)
DECLARE_LAYERS_ORDER_LIST(layersOrder);
for( LAYER_NUM layer_idx = FIRST_LAYER; layer_idx < NB_PCB_LAYERS; ++layer_idx )
{
layer = layersOrder[layer_idx];
wxASSERT(layer < NB_PCB_LAYERS);
if( m_BoxSelectLayer[layer] == NULL )
continue;
if( layer <= LAST_COPPER_LAYER )
m_CopperLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
else
m_TechnicalLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
layerKey.Printf( OPTKEY_LAYERBASE, layer );
bool option;
if( m_config->Read( layerKey, &option ) )
m_BoxSelectLayer[layer]->SetValue( option );
else
{
LAYER_MSK mask = GetLayerMask( layer );
if( mask & s_SelectedLayers )
m_BoxSelectLayer[layer]->SetValue( true );
}
}
// Option for excluding contents of "Edges Pcb" layer
m_Exclude_Edges_Pcb->Show( true );
// Read the scale adjust option
int scale_idx = 4; // default selected scale = ScaleList[4] = 1.000
if( m_config )
{
m_config->Read( OPTKEY_PRINT_X_FINESCALE_ADJ, &s_Parameters.m_XScaleAdjust );
m_config->Read( OPTKEY_PRINT_Y_FINESCALE_ADJ, &s_Parameters.m_YScaleAdjust );
m_config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
m_config->Read( OPTKEY_PRINT_PAGE_FRAME, &s_Parameters.m_Print_Sheet_Ref, 1);
m_config->Read( OPTKEY_PRINT_MONOCHROME_MODE, &s_Parameters.m_Print_Black_and_White, 1);
m_config->Read( OPTKEY_PRINT_PAGE_PER_LAYER, &s_Parameters.m_OptionPrintPage, 0);
int tmp;
m_config->Read( OPTKEY_PRINT_PADS_DRILL, &tmp, PRINT_PARAMETERS::SMALL_DRILL_SHAPE );
s_Parameters.m_DrillShapeOpt = (PRINT_PARAMETERS::DrillShapeOptT) tmp;
// Test for a reasonnable scale value. Set to 1 if problem
if( s_Parameters.m_XScaleAdjust < MIN_SCALE ||
s_Parameters.m_YScaleAdjust < MIN_SCALE ||
s_Parameters.m_XScaleAdjust > MAX_SCALE ||
s_Parameters.m_YScaleAdjust > MAX_SCALE )
s_Parameters.m_XScaleAdjust = s_Parameters.m_YScaleAdjust = 1.0;
s_SelectedLayers = NO_LAYERS;
for( LAYER_NUM layer = FIRST_LAYER; layer< NB_PCB_LAYERS; ++layer )
{
if( m_BoxSelectLayer[layer] == NULL )
continue;
wxString layerKey;
bool option;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
option = false;
if( m_config->Read( layerKey, &option ) )
{
m_BoxSelectLayer[layer]->SetValue( option );
if( option )
s_SelectedLayers |= GetLayerMask( layer );
}
}
}
m_ScaleOption->SetSelection( scale_idx );
scale_idx = m_ScaleOption->GetSelection();
s_Parameters.m_PrintScale = s_ScaleList[scale_idx];
m_Print_Mirror->SetValue(s_Parameters.m_PrintMirror);
m_Exclude_Edges_Pcb->SetValue(m_ExcludeEdgeLayer);
m_Print_Sheet_Ref->SetValue( s_Parameters.m_Print_Sheet_Ref );
// Options to plot pads and vias holes
m_Drill_Shape_Opt->SetSelection( s_Parameters.m_DrillShapeOpt );
if( s_Parameters.m_Print_Black_and_White )
m_ModeColorOption->SetSelection( 1 );
else
m_ModeColorOption->SetSelection( 0 );
m_PagesOption->SetSelection(s_Parameters.m_OptionPrintPage);
s_Parameters.m_PenDefaultSize = g_DrawDefaultLineThickness;
AddUnitSymbol( *m_TextPenWidth, g_UserUnit );
m_DialogPenWidth->SetValue(
ReturnStringFromValue( g_UserUnit, s_Parameters.m_PenDefaultSize ) );
// Create scale adjust option
msg.Printf( wxT( "%f" ), s_Parameters.m_XScaleAdjust );
m_FineAdjustXscaleOpt->SetValue( msg );
msg.Printf( wxT( "%f" ), s_Parameters.m_YScaleAdjust );
m_FineAdjustYscaleOpt->SetValue( msg );
bool enable = (s_Parameters.m_PrintScale == 1.0);
if( m_FineAdjustXscaleOpt )
m_FineAdjustXscaleOpt->Enable(enable);
if( m_FineAdjustYscaleOpt )
m_FineAdjustYscaleOpt->Enable(enable);
}
int DIALOG_PRINT_USING_PRINTER::SetLayerMaskFromListSelection()
{
int page_count;
s_Parameters.m_PrintMaskLayer = NO_LAYERS;
LAYER_NUM ii;
for( ii = FIRST_LAYER, page_count = 0; ii < NB_PCB_LAYERS; ++ii )
{
if( m_BoxSelectLayer[ii] == NULL )
continue;
if( m_BoxSelectLayer[ii]->IsChecked() )
{
page_count++;
s_Parameters.m_PrintMaskLayer |= GetLayerMask( ii );
}
}
// In Pcbnew force the EDGE layer to be printed or not with the other layers
m_ExcludeEdgeLayer = m_Exclude_Edges_Pcb->IsChecked();
if( m_ExcludeEdgeLayer )
s_Parameters.m_Flags = 0;
else
s_Parameters.m_Flags = 1;
s_Parameters.m_PageCount = page_count;
return page_count;
}
void DIALOG_PRINT_USING_PRINTER::OnCloseWindow( wxCloseEvent& event )
{
SetPrintParameters();
if( m_config )
{
ConfigBaseWriteDouble( m_config, OPTKEY_PRINT_X_FINESCALE_ADJ,
s_Parameters.m_XScaleAdjust );
ConfigBaseWriteDouble( m_config, OPTKEY_PRINT_Y_FINESCALE_ADJ,
s_Parameters.m_YScaleAdjust );
m_config->Write( OPTKEY_PRINT_SCALE, m_ScaleOption->GetSelection() );
m_config->Write( OPTKEY_PRINT_PAGE_FRAME, s_Parameters.m_Print_Sheet_Ref);
m_config->Write( OPTKEY_PRINT_MONOCHROME_MODE, s_Parameters.m_Print_Black_and_White);
m_config->Write( OPTKEY_PRINT_PAGE_PER_LAYER, s_Parameters.m_OptionPrintPage );
m_config->Write( OPTKEY_PRINT_PADS_DRILL, (long) s_Parameters.m_DrillShapeOpt );
wxString layerKey;
for( LAYER_NUM layer = FIRST_LAYER; layer < NB_PCB_LAYERS; ++layer )
{
if( m_BoxSelectLayer[layer] == NULL )
continue;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
m_config->Write( layerKey, m_BoxSelectLayer[layer]->IsChecked() );
}
}
EndModal( 0 );
}
void DIALOG_PRINT_USING_PRINTER::SetPrintParameters( )
{
PCB_PLOT_PARAMS plot_opts = m_parent->GetPlotSettings();
s_Parameters.m_PrintMirror = m_Print_Mirror->GetValue();
s_Parameters.m_Print_Sheet_Ref = m_Print_Sheet_Ref->GetValue();
s_Parameters.m_Print_Black_and_White =
m_ModeColorOption->GetSelection() != 0;
s_Parameters.m_DrillShapeOpt =
(PRINT_PARAMETERS::DrillShapeOptT) m_Drill_Shape_Opt->GetSelection();
if( m_PagesOption )
s_Parameters.m_OptionPrintPage = m_PagesOption->GetSelection() != 0;
SetLayerMaskFromListSelection();
int idx = m_ScaleOption->GetSelection();
s_Parameters.m_PrintScale = s_ScaleList[idx];
plot_opts.SetScale( s_Parameters.m_PrintScale );
if( m_FineAdjustXscaleOpt )
{
if( s_Parameters.m_XScaleAdjust > MAX_SCALE ||
s_Parameters.m_YScaleAdjust > MAX_SCALE )
DisplayInfoMessage( NULL, _( "Warning: Scale option set to a very large value" ) );
m_FineAdjustXscaleOpt->GetValue().ToDouble( &s_Parameters.m_XScaleAdjust );
}
if( m_FineAdjustYscaleOpt )
{
// Test for a reasonnable scale value
if( s_Parameters.m_XScaleAdjust < MIN_SCALE ||
s_Parameters.m_YScaleAdjust < MIN_SCALE )
DisplayInfoMessage( NULL, _( "Warning: Scale option set to a very small value" ) );
m_FineAdjustYscaleOpt->GetValue().ToDouble( &s_Parameters.m_YScaleAdjust );
}
plot_opts.SetFineScaleAdjustX( s_Parameters.m_XScaleAdjust );
plot_opts.SetFineScaleAdjustY( s_Parameters.m_YScaleAdjust );
m_parent->SetPlotSettings( plot_opts );
SetPenWidth();
}
void DIALOG_PRINT_USING_PRINTER::SetPenWidth()
{
// Get the new pen width value, and verify min et max value
// NOTE: s_Parameters.m_PenDefaultSize is in internal units
s_Parameters.m_PenDefaultSize = ReturnValueFromTextCtrl( *m_DialogPenWidth );
if( s_Parameters.m_PenDefaultSize > PEN_WIDTH_MAX_VALUE )
{
s_Parameters.m_PenDefaultSize = PEN_WIDTH_MAX_VALUE;
}
if( s_Parameters.m_PenDefaultSize < PEN_WIDTH_MIN_VALUE )
{
s_Parameters.m_PenDefaultSize = PEN_WIDTH_MIN_VALUE;
}
g_DrawDefaultLineThickness = s_Parameters.m_PenDefaultSize;
m_DialogPenWidth->SetValue(
ReturnStringFromValue( g_UserUnit, s_Parameters.m_PenDefaultSize ) );
}
void DIALOG_PRINT_USING_PRINTER::OnScaleSelectionClick( wxCommandEvent& event )
{
double scale = s_ScaleList[m_ScaleOption->GetSelection()];
bool enable = (scale == 1.0);
if( m_FineAdjustXscaleOpt )
m_FineAdjustXscaleOpt->Enable(enable);
if( m_FineAdjustYscaleOpt )
m_FineAdjustYscaleOpt->Enable(enable);
}
void DIALOG_PRINT_USING_PRINTER::OnPageSetup( wxCommandEvent& event )
{
wxPageSetupDialog pageSetupDialog( this, s_pageSetupData );
pageSetupDialog.ShowModal();
(*s_PrintData) = pageSetupDialog.GetPageSetupDialogData().GetPrintData();
(*s_pageSetupData) = pageSetupDialog.GetPageSetupDialogData();
}
void DIALOG_PRINT_USING_PRINTER::OnPrintPreview( wxCommandEvent& event )
{
SetPrintParameters( );
// If no layer selected, we have no plot. prompt user if it happens
// because he could think there is a bug in Pcbnew:
if( s_Parameters.m_PrintMaskLayer == 0 )
{
DisplayError( this, _( "No layer selected" ) );
return;
}
// Pass two printout objects: for preview, and possible printing.
wxString title = _( "Print Preview" );
wxPrintPreview* preview =
new wxPrintPreview( new BOARD_PRINTOUT_CONTROLLER( s_Parameters, m_parent, title ),
new BOARD_PRINTOUT_CONTROLLER( s_Parameters, m_parent, title ),
s_PrintData );
if( preview == NULL )
{
DisplayError( this, wxT( "OnPrintPreview() problem" ) );
return;
}
// Uses the parent position and size.
wxPoint WPos = m_parent->GetPosition();
wxSize WSize = m_parent->GetSize();
preview->SetZoom( 100 );
wxPreviewFrame* frame = new wxPreviewFrame( preview, this, title, WPos, WSize );
frame->Initialize();
frame->Show( true );
}
void DIALOG_PRINT_USING_PRINTER::OnPrintButtonClick( wxCommandEvent& event )
{
SetPrintParameters( );
// If no layer selected, we have no plot. prompt user if it happens
// because he could think there is a bug in Pcbnew:
if( s_Parameters.m_PrintMaskLayer == 0 )
{
DisplayError( this, _( "No layer selected" ) );
return;
}
wxPrintDialogData printDialogData( *s_PrintData );
wxPrinter printer( &printDialogData );
wxString title = _( "Print" );
BOARD_PRINTOUT_CONTROLLER printout( s_Parameters, m_parent, title );
// Alexander's patch had this removed altogether, waiting for testing.
#if 0 && !defined(__WINDOWS__) && !wxCHECK_VERSION(2,9,0)
wxDC* dc = printout.GetDC();
( (wxPostScriptDC*) dc )->SetResolution( 600 ); // Postscript DC resolution is 600 ppi
#endif
if( !printer.Print( this, &printout, true ) )
{
if( wxPrinter::GetLastError() == wxPRINTER_ERROR )
DisplayError( this, _( "There was a problem printing" ) );
return;
}
else
{
*s_PrintData = printer.GetPrintDialogData().GetPrintData();
}
}