kicad/pcbnew/pcbnew_config.cpp

399 lines
20 KiB
C++

/****************************************/
/** pcbnew_config.cpp : configuration **/
/****************************************/
#include "fctsys.h"
#include "appl_wxstruct.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "gestfich.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "class_board_design_settings.h"
#include "pcbplot.h"
#include "plot_common.h"
#include "worksheet.h"
#include "pcbnew_id.h"
#include "hotkeys.h"
#include "protos.h"
#include "dialog_mask_clearance.h"
#include "dialog_general_options.h"
#include "pcbnew_config.h"
#include "dialog_hotkeys_editor.h"
#define HOTKEY_FILENAME wxT( "pcbnew" )
void PCB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
{
int id = event.GetId();
wxFileName fn;
switch( id )
{
case ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG:
m_show_layer_manager_tools = ! m_show_layer_manager_tools;
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG,
m_show_layer_manager_tools ?
_("Hide &Layers Manager" ) : _("Show &Layers Manager" ));
break;
case ID_PCB_LAYERS_SETUP:
InstallDialogLayerSetup();
break;
case ID_CONFIG_REQ:
InstallConfigFrame();
break;
case ID_PCB_MASK_CLEARANCE:
{
DIALOG_PADS_MASK_CLEARANCE dlg( this );
dlg.ShowModal();
}
break;
case wxID_PREFERENCES:
{
Dialog_GeneralOptions dlg( this );
dlg.ShowModal();
}
break;
case ID_PCB_PAD_SETUP:
InstallPadOptionsFrame( NULL );
break;
case ID_CONFIG_SAVE:
SaveProjectSettings();
break;
case ID_CONFIG_READ:
{
fn = GetScreen()->GetFileName();
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
break;
if( !wxFileExists( dlg.GetPath() ) )
{
wxString msg;
msg.Printf( _( "File %s not found" ), GetChars( dlg.GetPath() ) );
DisplayError( this, msg );
break;
}
LoadProjectSettings( dlg.GetPath() );
break;
}
/* Hotkey IDs */
case ID_PREFERENCES_HOTKEY_EXPORT_CONFIG:
ExportHotkeyConfigToFile( g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_IMPORT_CONFIG:
ImportHotkeyConfigFromFile( g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_EDITOR:
InstallHotkeyFrame( this, g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
// Display current hotkey list for eeschema.
DisplayHotkeyList( this, g_Board_Editor_Hokeys_Descr );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::Process_Config error" ) );
}
}
/**
* Read the project configuration file settings.
*
* @param aProjectFileName = The project file name to load. If aProjectFileName
* is not found load the default project file kicad.pro
* and initialize setting to their default value.
* @return Always returns true.
*/
bool PCB_EDIT_FRAME::LoadProjectSettings( const wxString& aProjectFileName )
{
wxFileName fn = aProjectFileName;
if( fn.GetExt() != ProjectFileExtension )
fn.SetExt( ProjectFileExtension );
wxGetApp().RemoveLibraryPath( g_UserLibDirBuffer );
/* Initialize default values. */
g_LibName_List.Clear();
wxGetApp().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), false );
/* User library path takes precedent over default library search paths. */
wxGetApp().InsertLibraryPath( g_UserLibDirBuffer, 1 );
/* Reset the items visibility flag when loading a new config
* Because it could creates SERIOUS mistakes for the user,
* if board items are not visible after loading a board...
* Grid and ratsnest can be left to their previous state
*/
bool showGrid = IsElementVisible( GRID_VISIBLE );
bool showRats = IsElementVisible( RATSNEST_VISIBLE );
SetVisibleAlls();
SetElementVisibility( GRID_VISIBLE, showGrid );
SetElementVisibility( RATSNEST_VISIBLE, showRats );
return true;
}
void PCB_EDIT_FRAME::SaveProjectSettings()
{
wxFileName fn;
fn = GetScreen()->GetFileName();
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Save Project File" ), fn.GetPath(), fn.GetFullName(),
ProjectFileWildcard, wxFD_SAVE | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
return;
wxGetApp().WriteProjectConfig( dlg.GetPath(), GROUP, GetProjectFileParameters() );
}
/**
* Return project file parameter list for PCBNew.
*
* Populate the project file parameter array specific to PCBNew if it hasn't
* already been populated and return a reference to the array to the caller.
* Creating the parameter list at run time has the advantage of being able
* to define local variables. The old method of statically building the array
* at compile time requiring global variable definitions by design.
*/
PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetProjectFileParameters()
{
if( !m_projectFileParams.empty() )
return m_projectFileParams;
m_projectFileParams.push_back( new PARAM_CFG_FILENAME( wxT( "LibDir" ),&g_UserLibDirBuffer,
GROUPLIB ) );
m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST( wxT( "LibName" ), &g_LibName_List,
GROUPLIB ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDrlX" ), &g_Pad_Master.m_Drill.x,
320, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimH" ), &g_Pad_Master.m_Size.x,
550, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimV" ), &g_Pad_Master.m_Size.y,
550, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "BoardThickness" ),
&boardDesignSettings.m_BoardThickness,
630, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbV" ),
&boardDesignSettings.m_PcbTextSize.y,
600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbH" ),
&boardDesignSettings.m_PcbTextSize.x,
600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModV" ), &g_ModuleTextSize.y,
500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModH" ), &g_ModuleTextSize.x,
500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModW" ), &g_ModuleTextWidth,
100, 1, TEXTS_MAX_WIDTH ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "VEgarde" ),
&boardDesignSettings.m_SolderMaskMargin,
100, 0, 10000 ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "DrawLar" ),
&boardDesignSettings.m_DrawSegmentWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "EdgeLar" ),
&boardDesignSettings.m_EdgeSegmentWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtLar" ),
&boardDesignSettings.m_PcbTextWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "MSegLar" ), &g_ModuleSegmentWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_FILENAME( wxT( "LastNetListRead" ),
&m_lastNetListRead ) );
return m_projectFileParams;
}
/*
* Return the PCBNew applications settings list.
*
* This replaces the old statically define list that had the project
* file settings and the application settings mixed together. This
* was confusing and caused some settings to get saved and loaded
* incorrectly. Currently, only the settings that are needed at start
* up by the main window are defined here. There are other locally used
* settings are scattered throughout the PCBNew source code. If you need
* to define a configuration setting that need to be loaded at run time,
* this is the place to define it.
*
* @todo: Define the configuration variables as member variables instead of
* global variables or move them to the object class where they are
* used.
*/
PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetConfigurationSettings()
{
if( !m_configSettings.empty() )
return m_configSettings;
// Units used in dialogs and toolbars
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "Units" ), (int*)&g_UserUnit, MILLIMETRES ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DisplayPolarCoords" ),
&DisplayOpt.DisplayPolarCood, false ) );
// Display options and modes:
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ViaHoleDisplayMode" ),
&DisplayOpt.m_DisplayViaMode,
VIA_SPECIAL_HOLE_SHOW, VIA_HOLE_NOT_SHOW,
OPT_VIA_HOLE_END - 1 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ShowNetNamesMode" ),
&DisplayOpt.DisplayNetNamesMode, 3, 0, 3 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DisplayTrackFilled" ),
&DisplayOpt.DisplayPcbTrackFill, true ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TrackDisplayClearance" ),
&DisplayOpt.ShowTrackClearanceMode,
SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadFill" ),
&DisplayOpt.DisplayPadFill, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ViaFill" ),
&DisplayOpt.DisplayViaFill, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadAffG" ),
&DisplayOpt.DisplayPadIsol, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadSNum" ),
&DisplayOpt.DisplayPadNum, true ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffC" ),
&DisplayOpt.DisplayModEdge, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffT" ),
&DisplayOpt.DisplayModText, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbAffT" ),
&DisplayOpt.DisplayDrawItems, FILLED, 0, 2 ) );
// Colors:
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay0" ), LOC_COLOR( 0 ),
GREEN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay1" ), LOC_COLOR( 1 ),
BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay2" ), LOC_COLOR( 2 ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay3" ), LOC_COLOR( 3 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay4" ), LOC_COLOR( 4 ),
4 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay5" ), LOC_COLOR( 5 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay6" ), LOC_COLOR( 6 ),
6 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay7" ), LOC_COLOR( 7 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay8" ), LOC_COLOR( 8 ),
7 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay9" ), LOC_COLOR( 9 ),
1 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayA" ), LOC_COLOR( 10 ),
2 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayB" ), LOC_COLOR( 11 ),
3 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayC" ), LOC_COLOR( 12 ),
12 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayD" ), LOC_COLOR( 13 ),
13 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayE" ), LOC_COLOR( 14 ),
14 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayF" ), LOC_COLOR( 15 ),
RED ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayG" ), LOC_COLOR( 16 ),
1 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayH" ), LOC_COLOR( 17 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayI" ), LOC_COLOR( 18 ),
11 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayJ" ), LOC_COLOR( 19 ),
4 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayK" ), LOC_COLOR( 20 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayL" ), LOC_COLOR( 21 ),
3 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayM" ), LOC_COLOR( 22 ),
6 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayN" ), LOC_COLOR( 23 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayO" ), LOC_COLOR( 24 ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayP" ), LOC_COLOR( 25 ),
1 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayQ" ), LOC_COLOR( 26 ),
2 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayR" ), LOC_COLOR( 27 ),
14 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayS" ), LOC_COLOR( 28 ),
YELLOW ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayT" ), LOC_COLOR( 29 ),
13 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayU" ), LOC_COLOR( 30 ),
14 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayV" ), LOC_COLOR( 31 ),
7 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoC" ),
ITEM_COLOR( MOD_TEXT_FR_VISIBLE ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoS" ),
ITEM_COLOR( MOD_TEXT_BK_VISIBLE ),
BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtVis" ),
ITEM_COLOR( MOD_TEXT_INVISIBLE ),
DARKGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CAncreM" ),
ITEM_COLOR( ANCHOR_VISIBLE ), BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCu" ),
ITEM_COLOR( PAD_BK_VISIBLE ), GREEN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCm" ),
ITEM_COLOR( PAD_FR_VISIBLE ), RED ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaTh" ),
ITEM_COLOR( VIA_THROUGH_VISIBLE ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaBu" ),
ITEM_COLOR( VIA_BBLIND_VISIBLE ),
BROWN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaMi" ),
ITEM_COLOR( VIA_MICROVIA_VISIBLE ),
CYAN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoRatsN" ),
ITEM_COLOR( RATSNEST_VISIBLE ),
WHITE ) );
// Miscellaneous:
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TimeOut" ), &g_TimeOut,
600, 0, 60000 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "MaxLnkS" ), &g_MaxLinksShowed,
3, 0, 15 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ShowMRa" ),
&g_Show_Module_Ratsnest, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "TwoSegT" ),
&g_TwoSegmentTrackBuild, true ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "SegmPcb45Only" ), &Segments_45_Only,
true ) );
return m_configSettings;
}