kicad/pcbnew/pcbplot.h

194 lines
6.6 KiB
C++

/**
* @file pcbnew/pcbplot.h
*/
#ifndef PCBPLOT_H_
#define PCBPLOT_H_
#include <pad_shapes.h>
#include <pcb_plot_params.h>
class PLOTTER;
class TEXTE_PCB;
class DRAWSEGMENT;
class DIMENSION;
class MODULE;
class EDGE_MODULE;
class PCB_TARGET;
class TEXTE_MODULE;
class ZONE_CONTAINER;
class BOARD;
// Shared Config keys for plot and print
#define OPTKEY_LAYERBASE wxT( "PlotLayer_%d" )
#define OPTKEY_PRINT_X_FINESCALE_ADJ wxT( "PrintXFineScaleAdj" )
#define OPTKEY_PRINT_Y_FINESCALE_ADJ wxT( "PrintYFineScaleAdj" )
#define OPTKEY_PRINT_SCALE wxT( "PrintScale" )
#define OPTKEY_PRINT_MODULE_SCALE wxT( "PrintModuleScale" )
#define OPTKEY_PRINT_PAGE_FRAME wxT( "PrintPageFrame" )
#define OPTKEY_PRINT_MONOCHROME_MODE wxT( "PrintMonochrome" )
#define OPTKEY_PRINT_PADS_DRILL wxT( "PrintPadsDrillOpt" )
#define OPTKEY_PLOT_X_FINESCALE_ADJ wxT( "PlotXFineScaleAdj" )
#define OPTKEY_PLOT_Y_FINESCALE_ADJ wxT( "PlotYFineScaleAdj" )
#define CONFIG_PS_FINEWIDTH_ADJ wxT( "PSPlotFineWidthAdj" )
// Define min and max reasonable values for plot/print scale
#define PLOT_MIN_SCALE 0.01
#define PLOT_MAX_SCALE 100.0
// Conversion unit constants.
// Convert pcb dimension of 0.1 mil to PS units of inches.
#define SCALE_PS .0001
// Convert dimension 0.1 mil -> HPGL units (1 HPGL unit = 25 micrometers):
#define SCALE_HPGL 0.102041
// Small drill marks (small pad holes) diameter value
#define SMALL_DRILL (int)( 0.35 * IU_PER_MM )
// A helper class to plot board items
class BRDITEMS_PLOTTER: public PCB_PLOT_PARAMS
{
PLOTTER* m_plotter;
BOARD* m_board;
int m_layerMask;
public:
BRDITEMS_PLOTTER( PLOTTER* aPlotter, BOARD* aBoard, const PCB_PLOT_PARAMS& aPlotOpts )
: PCB_PLOT_PARAMS( aPlotOpts )
{
m_plotter = aPlotter;
m_board = aBoard;
m_layerMask = 0;
}
/**
* @return a 'width adjustment' for the postscript engine
* (useful for controlling toner bleeding during direct transfer)
* addded to track width and via/pads size
*/
int getFineWidthAdj()
{
if( GetFormat() == PLOT_FORMAT_POST )
return GetWidthAdjust();
else
return 0;
}
// Basic functions to plot a board item
void SetLayerMask( int aLayerMask ){ m_layerMask = aLayerMask; }
void Plot_Edges_Modules();
void Plot_1_EdgeModule( EDGE_MODULE* aEdge );
void PlotTextModule( TEXTE_MODULE* aTextMod, EDA_COLOR_T aColor );
bool PlotAllTextsModule( MODULE* aModule );
void PlotDimension( DIMENSION* Dimension );
void PlotPcbTarget( PCB_TARGET* PtMire );
void PlotFilledAreas( ZONE_CONTAINER* aZone );
void PlotTextePcb( TEXTE_PCB* pt_texte );
void PlotDrawSegment( DRAWSEGMENT* PtSegm );
/**
* Plot a pad.
* unlike other items, a pad had not a specific color,
* and be drawn as a non filled item although the plot mode is filled
* color and plot mode are needed by this function
*/
void PlotPad( D_PAD* aPad, EDA_COLOR_T aColor, EDA_DRAW_MODE_T aPlotMode );
/**
* plot items like text and graphics,
* but not tracks and modules
*/
void PlotBoardGraphicItems();
/** Function PlotDrillMarks
* Draw a drill mark for pads and vias.
* Must be called after all drawings, because it
* redraw the drill mark on a pad or via, as a negative (i.e. white) shape in
* FILLED plot mode (for PS and PDF outputs)
*/
void PlotDrillMarks();
/**
* Function getColor
* @return the layer color
* @param aLayer = the layer id
* White color is special: cannot be seen on a white paper
* and in B&W mode, is plotted as white but other colors are plotted in BLACK
* so the returned color is LIGHTGRAY when the layer color is WHITE
*/
EDA_COLOR_T getColor( int aLayer );
private:
/** Helper function to plot a single drill mark. It compensate and clamp
* the drill mark size depending on the current plot options
*/
void plotOneDrillMark( PAD_SHAPE_T aDrillShape,
const wxPoint &aDrillPos, wxSize aDrillSize,
const wxSize &aPadSize,
double aOrientation, int aSmallDrill );
};
PLOTTER *StartPlotBoard( BOARD *aBoard,
PCB_PLOT_PARAMS *aPlotOpts,
const wxString& aFullFileName,
const wxString& aSheetDesc );
/**
* Function PlotOneBoardLayer
* main function to plot one copper or technical layer.
* It prepare options and calls the specilized plot function,
* according to the layer type
* @param aBoard = the board to plot
* @param aPlotter = the plotter to use
* @param aLayer = the layer id to plot
* @param aPlotOpt = the plot options (files, sketch). Has meaning for some formats only
*/
void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, int aLayer,
const PCB_PLOT_PARAMS& aPlotOpt );
/**
* Function PlotStandardLayer
* plot copper or technical layers.
* not used for silk screen layers, because these layers have specific
* requirements, mainly for pads
* @param aBoard = the board to plot
* @param aPlotter = the plotter to use
* @param aLayerMask = the mask to define the layers to plot
* @param aPlotOpt = the plot options (files, sketch). Has meaning for some formats only
*
* aPlotOpt has 3 important options to controle this plot,
* which are set, depending on the layer typpe to plot
* SetEnablePlotVia( bool aEnable )
* aEnable = true to plot vias, false to skip vias (has meaning
* only for solder mask layers).
* SetSkipPlotNPTH_Pads( bool aSkip )
* aSkip = true to skip NPTH Pads, when the pad size and the pad hole
* have the same size. Used in GERBER format only.
* SetDrillMarksType( DrillMarksType aVal ) controle the actual hole:
* no hole, small hole, actual hole
*/
void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask,
const PCB_PLOT_PARAMS& aPlotOpt );
/**
* Function PlotSilkScreen
* plot silkscreen layers which have specific requirements, mainly for pads.
* Should not be used for other layers
* @param aBoard = the board to plot
* @param aPlotter = the plotter to use
* @param aLayerMask = the mask to define the layers to plot (silkscreen Front and/or Back)
* @param aPlotOpt = the plot options (files, sketch). Has meaning for some formats only
*/
void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, long aLayerMask,
const PCB_PLOT_PARAMS& aPlotOpt );
// PLOTGERB.CPP
void SelectD_CODE_For_LineDraw( PLOTTER* plotter, int aSize );
#endif // PCBPLOT_H_