34 lines
1.9 KiB
C
34 lines
1.9 KiB
C
// Do not edit this file, it is autogenerated by CMake from the .md file
|
|
_HKI( "E-series defined in IEC 60063 are a widely accepted system of preferred\n"
|
|
"numbers for electronic components. Available values are approximately\n"
|
|
"equally spaced in a logarithmic scale. Although E-series are used for\n"
|
|
"Zener diodes, inductors and other components, this calculator is mainly\n"
|
|
"intended for resistors.\n"
|
|
"\n"
|
|
" E12: 1,0 1,2 1,5 1,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2\n"
|
|
" E6: 1,0 - 1,5 - 2,2 - 3,3 - 4,7 - 6,8 -\n"
|
|
" E3: 1,0 - - - 2,2 - - - 4,7 - - -\n"
|
|
" E1: 1,0 - - - - - - - - - - -\n"
|
|
"If your design requires any resistor value which is not readily available,\n"
|
|
"this calculator will find a combination of standard E-series components to\n"
|
|
"create it. You can enter the required resistance from 0,0025 to 4000 KOhm. \n"
|
|
"Solutions using 3 or 4 resistors are given if a better match can be found. \n"
|
|
"The 4R checkbox option will take longer to process is considered for the E12\n"
|
|
"series only. Optionally it is possible to exclude up to two additional\n"
|
|
"values from the solution for the reason of being not available. If a\n"
|
|
"E-series value is entered to the required input field, it is always excluded\n"
|
|
"from any solution as it is assumed that this value is unavailable.\n"
|
|
"\n"
|
|
"Solutions are given in the following formats:\n"
|
|
"\n"
|
|
" R1 + R2 +...+ Rn resistors in series\n"
|
|
" R1 | R2 |...| Rn resistors in parallel\n"
|
|
" R1 + (R2|R3)... any combination of the above\n"
|
|
"__Example:__ Voltage dividers, commonly used for 1:10 range selection\n"
|
|
"require resistor ratio values 1:9. Unfortunately the \"9\" is a value, what\n"
|
|
"is not even in the E192 series available. Deviation of 1% and more is yet\n"
|
|
"unacceptable for 8 bit accuracy. For a required resistor value of 9 KOhm,\n"
|
|
"the calculator suggests the E6 values 2k2 + 6k8 in series as a possible\n"
|
|
"exact solution.\n"
|
|
"" );
|