kicad/pcbnew/onrightclick.cpp

904 lines
35 KiB
C++

/**************************************************/
/* onrightclick.cpp: Right mouse button functions */
/**************************************************/
#include "fctsys.h"
#include "gr_basic.h"
#include "macros.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "class_board_design_settings.h"
#include "pcbnew_id.h"
#include "hotkeys.h"
#include "collectors.h"
/* Bitmaps */
#include "bitmaps.h"
static wxMenu* Append_Track_Width_List( BOARD* aBoard );
/******************************************************************************/
bool WinEDA_PcbFrame::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
/******************************************************************************/
{
wxString msg;
int flags = 0;
bool locate_track = FALSE;
bool BlockActive = (GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE);
wxClientDC dc( DrawPanel );
BOARD_ITEM* item = GetCurItem();
DrawPanel->m_CanStartBlock = -1; // Avoid to start a block coomand when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( BlockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
DrawPanel->CursorOff( &dc );
if( m_ID_current_state )
{
if( item && item->m_Flags )
{
ADD_MENUITEM( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), cancel_xpm );
}
else
{
ADD_MENUITEM( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), cancel_tool_xpm );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->m_Flags )
{
ADD_MENUITEM( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), cancel_xpm );
aPopMenu->AppendSeparator();
}
}
/* Select a proper item */
wxPoint cursorPos = GetScreen()->m_Curseur;
wxPoint selectPos = m_Collector->GetRefPos();
PutOnGrid( &selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->m_Flags == 0) )
{
// show "item selector" menu only if no item now or selected item was not
// previously picked at this position
if( !item || cursorPos != selectPos )
{
DrawPanel->m_AbortRequest = false;
item = PcbGeneralLocateAndDisplay();
if( DrawPanel->m_AbortRequest )
{
DrawPanel->CursorOn( &dc );
return false;
}
}
}
item = GetCurItem();
if( item )
flags = item->m_Flags;
else
flags = 0;
if( item )
{
switch( item->Type() )
{
case TYPE_MODULE:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_MODULE )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _(
"Lock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
locked_xpm );
}
else
{
msg = AddHotkeyName( _(
"Unlock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
unlocked_xpm );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Auto Place Module" ) );
}
if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_TRACKS )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE, _( "Autoroute Module" ) );
}
break;
case TYPE_PAD:
createPopUpMenuForFpPads( (D_PAD*) item, aPopMenu );
break;
case TYPE_TEXTE_MODULE:
createPopUpMenuForFpTexts( (TEXTE_MODULE*) item, aPopMenu );
break;
case TYPE_DRAWSEGMENT: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), apply_xpm );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, move_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING, _( "Edit Drawing" ), edit_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING, _(
"Delete Drawing" ), delete_xpm );
if( item->GetLayer() > LAST_COPPER_LAYER )
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawing on Layer" ), delete_body_xpm );
}
break;
case TYPE_ZONE: // Item used to fill a zone
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), delete_xpm );
break;
case TYPE_ZONE_CONTAINER: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), apply_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), delete_xpm );
}
else
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
break;
case TYPE_TEXTE:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case TYPE_TRACK:
case TYPE_VIA:
locate_track = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case TYPE_MARKER_PCB:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case TYPE_DIMENSION:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION,
msg, edit_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
_( "Delete Dimension" ), delete_xpm );
}
break;
case TYPE_MIRE:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST, msg, move_xpm );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_EDIT_MIRE,
msg, edit_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
_( "Delete Target" ), delete_xpm );
}
break;
case TYPE_EDGE_MODULE:
case TYPE_SCREEN:
case TYPE_NOT_INIT:
case TYPE_PCB:
msg.Printf(
wxT( "WinEDA_PcbFrame::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
DisplayError( this, msg );
SetCurItem( NULL );
break;
default:
msg.Printf(
wxT( "WinEDA_PcbFrame::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
DisplayError( this, msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, move_module_xpm );
}
/* Display context sensitive comands: */
switch( m_ID_current_state )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
_( "Fill or Refill All Zones" ), fill_zone_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
_( "Remove Filled Areas in All Zones" ), fill_zone_xpm );
aPopMenu->AppendSeparator();
}
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), select_w_layer_xpm );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! locate_track ) // This menu is already added when a track is located
ADD_MENUITEM_WITH_SUBMENU( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH,
_( "Select Track Width" ), width_track_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), select_w_layer_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), select_layer_pair_xpm );
aPopMenu->AppendSeparator();
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), select_w_layer_xpm );
aPopMenu->AppendSeparator();
break;
case ID_COMPONENT_BUTT:
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), book_xpm );
aPopMenu->AppendSeparator();
break;
case 0:
if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_MODULE )
{
wxMenu* commands = new wxMenu;
ADD_MENUITEM_WITH_SUBMENU( aPopMenu, commands,
ID_POPUP_PCB_AUTOPLACE_COMMANDS, _(
"Glob Move and Place" ), move_xpm );
ADD_MENUITEM( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Modules" ), unlocked_xpm );
ADD_MENUITEM( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Modules" ), locked_xpm );
commands->AppendSeparator();
ADD_MENUITEM( commands, ID_POPUP_PCB_AUTOMOVE_ALL_MODULES,
_( "Move All Modules" ), move_xpm );
commands->Append( ID_POPUP_PCB_AUTOMOVE_NEW_MODULES, _( "Move New Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES, _( "Autoplace All Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES, _( "Autoplace New Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE, _( "Autoplace Next Module" ) );
commands->AppendSeparator();
ADD_MENUITEM( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Modules" ), rotate_module_pos_xpm );
aPopMenu->AppendSeparator();
}
if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_TRACKS )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
ADD_MENUITEM( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), select_layer_pair_xpm );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES, _( "Autoroute All Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( locate_track )
ADD_MENUITEM_WITH_SUBMENU( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
width_track_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), select_w_layer_xpm );
aPopMenu->AppendSeparator();
break;
}
DrawPanel->CursorOn( &dc );
return true;
}
/*********************************************************/
void WinEDA_PcbFrame::createPopUpBlockMenu( wxMenu* menu )
/*********************************************************/
/* Create Pop sub menu for block commands
*/
{
ADD_MENUITEM( menu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel Block" ), cancel_xpm );
ADD_MENUITEM( menu, ID_POPUP_ZOOM_BLOCK,
_( "Zoom Block" ), zoom_selected_xpm );
menu->AppendSeparator();
ADD_MENUITEM( menu, ID_POPUP_PLACE_BLOCK,
_( "Place Block" ), apply_xpm );
ADD_MENUITEM( menu, ID_POPUP_COPY_BLOCK,
_( "Copy Block" ), copyblock_xpm );
ADD_MENUITEM( menu, ID_POPUP_FLIP_BLOCK,
_( "Flip Block" ), invert_module_xpm );
ADD_MENUITEM( menu, ID_POPUP_ROTATE_BLOCK,
_( "Rotate Block" ), rotate_pos_xpm );
ADD_MENUITEM( menu, ID_POPUP_DELETE_BLOCK,
_( "Delete Block" ), delete_xpm );
}
/******************************************************************************/
void WinEDA_PcbFrame::createPopupMenuForTracks( TRACK* Track, wxMenu* PopMenu )
/******************************************************************************/
/* Create command lines for a popup menu, for track and via editing
* also update Netclass selection
*/
{
wxPoint cursorPosition = GetScreen()->m_Curseur;
wxString msg;
GetBoard()->SetCurrentNetClass( Track->GetNetClassName() );
m_TrackAndViasSizesList_Changed = true;
AuxiliaryToolBar_Update_UI();
int flags = Track->m_Flags;
if( flags == 0 )
{
if( Track->Type() == TYPE_VIA )
{
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_MOVE_TRACK_NODE, _( "Drag Via" ), move_xpm );
}
else
{
if( Track->IsPointOnEnds( cursorPosition, -1 ) != 0 )
{
msg = AddHotkeyName( _( "Move Node" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM );
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_MOVE_TRACK_NODE,
msg, move_xpm );
}
else
{
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE,
_( "Drag Segments, Keep Slope" ), drag_segment_withslope_xpm );
msg = AddHotkeyName( _( "Drag Segment" ), g_Board_Editor_Hokeys_Descr, HK_DRAG_ITEM );
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_DRAG_TRACK_SEGMENT,
msg, drag_track_segment_xpm );
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_BREAK_TRACK,
_( "Break Track" ), break_line_xpm );
}
}
}
else if( flags & IS_DRAGGED ) // Drag via or node in progress
{
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE,
_( "Place Node" ), apply_xpm );
return;
}
else // Edition in progress
{
if( flags & IS_NEW )
{
msg = AddHotkeyName( _( "End Track" ), g_Board_Editor_Hokeys_Descr, HK_END_TRACK );
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_END_TRACK, msg, apply_xpm );
}
msg = AddHotkeyName( _( "Place Via" ), g_Board_Editor_Hokeys_Descr, HK_ADD_VIA );
PopMenu->Append( ID_POPUP_PCB_PLACE_VIA, msg );
msg = AddHotkeyName( _( "Switch Track Posture" ), g_Board_Editor_Hokeys_Descr, HK_SWITCH_TRACK_POSTURE );
PopMenu->Append( ID_POPUP_PCB_SWITCH_TRACK_POSTURE, msg );
// See if we can place a Micro Via (4 or more layers, and start from an external layer):
if( IsMicroViaAcceptable() )
{
msg = AddHotkeyName( _(
"Place Micro Via" ), g_Board_Editor_Hokeys_Descr,
HK_ADD_MICROVIA );
PopMenu->Append( ID_POPUP_PCB_PLACE_MICROVIA, msg );
}
}
// track Width control :
if( !flags )
{
if( Track->Type() == TYPE_VIA )
{
msg = AddHotkeyName( _( "Change Via Size and Drill" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_TRACKSEG, msg, width_segment_xpm );
}
else
{
msg = AddHotkeyName( _( "Change Segment Width" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_TRACKSEG, msg, width_segment_xpm );
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_TRACK,
_( "Change Track Width" ), width_track_xpm );
}
}
// Allows switching to an other track/via size when routing
ADD_MENUITEM_WITH_SUBMENU( PopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH,
_( "Select Track Width" ), width_track_xpm );
// Delete control:
PopMenu->AppendSeparator();
wxMenu* track_mnu = new wxMenu;
ADD_MENUITEM_WITH_SUBMENU( PopMenu, track_mnu,
ID_POPUP_PCB_DELETE_TRACK_MNU, _( "Delete" ), delete_xpm );
msg = AddHotkeyName( Track->Type()==TYPE_VIA ?
_( "Delete Via" ) : _( "Delete Segment" ),
g_Board_Editor_Hokeys_Descr, HK_BACK_SPACE );
ADD_MENUITEM( track_mnu, ID_POPUP_PCB_DELETE_TRACKSEG,
msg, delete_line_xpm );
if( !flags )
{
msg = AddHotkeyName( _( "Delete Track" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
ADD_MENUITEM( track_mnu, ID_POPUP_PCB_DELETE_TRACK,
msg, delete_track_xpm );
ADD_MENUITEM( track_mnu, ID_POPUP_PCB_DELETE_TRACKNET,
_( "Delete Net" ), delete_net_xpm );
}
// Add global edition command
if( !flags )
{
PopMenu->AppendSeparator();
ADD_MENUITEM( PopMenu, ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE,
_( "Global Tracks and Vias Edition" ), width_track_via_xpm );
}
// Add lock/unlock flags menu:
track_mnu = new wxMenu;
ADD_MENUITEM_WITH_SUBMENU( PopMenu, track_mnu,
ID_POPUP_PCB_SETFLAGS_TRACK_MNU, _( "Set Flags" ), flag_xpm );
track_mnu->Append( ID_POPUP_PCB_LOCK_ON_TRACKSEG, _( "Locked: Yes" ), wxEmptyString, true );
track_mnu->Append( ID_POPUP_PCB_LOCK_OFF_TRACKSEG, _( "Locked: No" ), wxEmptyString, true );
if( Track->GetState( SEGM_FIXE ) )
track_mnu->Check( ID_POPUP_PCB_LOCK_ON_TRACKSEG, true );
else
track_mnu->Check( ID_POPUP_PCB_LOCK_OFF_TRACKSEG, true );
if( !flags )
{
track_mnu->Append( ID_POPUP_PCB_LOCK_ON_TRACK, _( "Track Locked: Yes" ) );
track_mnu->Append( ID_POPUP_PCB_LOCK_OFF_TRACK, _( "Track Locked: No" ) );
track_mnu->AppendSeparator();
track_mnu->Append( ID_POPUP_PCB_LOCK_ON_NET, _( "Net Locked: Yes" ) );
track_mnu->Append( ID_POPUP_PCB_LOCK_OFF_NET, _( "Net Locked: No" ) );
}
}
/********************************************************************************************/
void WinEDA_PcbFrame::createPopUpMenuForZones( ZONE_CONTAINER* edge_zone, wxMenu* aPopMenu )
/********************************************************************************************/
/* Create the wxMenuitem list for zone outlines editing and zone filling
*/
{
wxString msg;
if( edge_zone->m_Flags == IS_DRAGGED )
{
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_PLACE_DRAGGED_ZONE_OUTLINE_SEGMENT,
_( "Place Edge Outline" ), apply_xpm );
}
else if( edge_zone->m_Flags )
{
if( (edge_zone->m_Flags & IN_EDIT ) )
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_PLACE_ZONE_CORNER,
_( "Place Corner" ), apply_xpm );
else
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_PLACE_ZONE_OUTLINES,
_( "Place Zone" ), apply_xpm );
}
else
{
wxMenu* zones_menu = new wxMenu();
ADD_MENUITEM_WITH_SUBMENU( aPopMenu, zones_menu,
-1, _( "Zones" ), add_zone_xpm );
int index;
if( ( index = edge_zone->HitTestForCorner( GetScreen()->RefPos( true ) ) ) >= 0 )
{
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_MOVE_ZONE_CORNER,
_( "Move Corner" ), move_xpm );
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DELETE_ZONE_CORNER,
_( "Delete Corner" ), delete_xpm );
}
else if( ( index = edge_zone->HitTestForEdge( GetScreen()->RefPos( true ) ) ) >= 0 )
{
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_ADD_ZONE_CORNER,
_( "Create Corner" ), add_corner_xpm );
msg = AddHotkeyName( _( "Drag Outline Segment" ), g_Board_Editor_Hokeys_Descr, HK_DRAG_ITEM );
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT,
msg, drag_outline_segment_xpm );
}
zones_menu->AppendSeparator();
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE,
_( "Add Similar Zone" ), add_zone_xpm );
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE,
_( "Add Cutout Area" ), add_zone_cutout );
zones_menu->AppendSeparator();
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_FILL_ZONE,
_( "Fill Zone" ), fill_zone_xpm );
if( edge_zone->m_FilledPolysList.size() > 0 )
{
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE,
_( "Remove Filled Areas in Zone" ), fill_zone_xpm );
}
msg = AddHotkeyName( _( "Move Zone" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM );
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_MOVE_ZONE_OUTLINES,
msg, move_xpm );
msg = AddHotkeyName( _( "Edit Zone Params" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_EDIT_ZONE_PARAMS,
msg, edit_xpm );
zones_menu->AppendSeparator();
if( index >= 0 && edge_zone->m_Poly->IsCutoutContour( edge_zone->m_CornerSelection ) )
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DELETE_ZONE_CUTOUT,
_( "Delete Cutout" ), delete_xpm );
ADD_MENUITEM( zones_menu, ID_POPUP_PCB_DELETE_ZONE_CONTAINER,
_( "Delete Zone Outline" ), delete_xpm );
}
}
/*********************************************************************************/
void WinEDA_PcbFrame::createPopUpMenuForFootprints( MODULE* aModule, wxMenu* menu )
/*********************************************************************************/
/* Create the wxMenuitem list for footprint editing
*/
{
wxMenu* sub_menu_footprint;
int flags = aModule->m_Flags;
wxString msg;
sub_menu_footprint = new wxMenu;
msg = aModule->MenuText( GetBoard() );
ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_footprint, -1, msg, module_xpm );
if( !flags )
{
msg = AddHotkeyName( _( "Move" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM );
ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_MOVE_MODULE_REQUEST,
msg, move_module_xpm );
msg = AddHotkeyName( _( "Drag" ), g_Board_Editor_Hokeys_Descr, HK_DRAG_ITEM );
ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_DRAG_MODULE_REQUEST,
msg, drag_module_xpm );
}
msg = AddHotkeyName( _( "Rotate +" ), g_Board_Editor_Hokeys_Descr, HK_ROTATE_ITEM );
ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE,
msg, rotate_module_pos_xpm );
ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE,
_( "Rotate -" ), rotate_module_neg_xpm );
msg = AddHotkeyName( _( "Flip" ), g_Board_Editor_Hokeys_Descr, HK_FLIP_FOOTPRINT );
ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_CHANGE_SIDE_MODULE,
msg, invert_module_xpm );
if( !flags )
{
msg = AddHotkeyName( _( "Edit" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_EDIT_MODULE,
msg, edit_module_xpm );
sub_menu_footprint->AppendSeparator();
ADD_MENUITEM( sub_menu_footprint, ID_POPUP_PCB_DELETE_MODULE,
_( "Delete Module" ), delete_module_xpm );
}
}
/********************************************************************/
void WinEDA_PcbFrame::createPopUpMenuForFpTexts( TEXTE_MODULE* FpText, wxMenu* menu )
/********************************************************************/
/* Create the wxMenuitem list for editing texts on footprints
*/
{
wxMenu* sub_menu_Fp_text;
int flags = FpText->m_Flags;
wxString msg = FpText->MenuText( GetBoard() );
sub_menu_Fp_text = new wxMenu;
ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_Fp_text, -1, msg, footprint_text_xpm );
if( !flags )
{
msg = AddHotkeyName( _( "Move" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM );
ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST,
msg, move_field_xpm );
}
msg = AddHotkeyName( _( "Rotate" ), g_Board_Editor_Hokeys_Descr, HK_ROTATE_ITEM );
ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_ROTATE_TEXTMODULE,
msg, rotate_field_xpm );
if( !flags )
{
msg = AddHotkeyName( _( "Edit" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_EDIT_TEXTMODULE,
msg, edit_text_xpm );
}
if( !flags && FpText->m_Type == TEXT_is_DIVERS ) // Graphic texts can be deleted only if are not currently edited
{
ADD_MENUITEM( sub_menu_Fp_text, ID_POPUP_PCB_DELETE_TEXTMODULE,
_( "Delete" ), delete_xpm );
}
if( !flags )
{
MODULE* module = (MODULE*) FpText->GetParent();
if( module )
{
menu->AppendSeparator();
createPopUpMenuForFootprints( module, menu );
}
}
}
/************************************************************************/
void WinEDA_PcbFrame::createPopUpMenuForFpPads( D_PAD* Pad, wxMenu* menu )
/************************************************************************/
/* Create pop menu for pads
* also update Netclass selection
*/
{
wxMenu* sub_menu_Pad;
int flags = Pad->m_Flags;
if( flags ) // Currently in edit, no others commands possible
return;
GetBoard()->SetCurrentNetClass( Pad->GetNetClassName() );
m_TrackAndViasSizesList_Changed = true;
AuxiliaryToolBar_Update_UI();
wxString msg = Pad->MenuText( GetBoard() );
sub_menu_Pad = new wxMenu;
ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_Pad, -1, msg, pad_xpm );
ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_MOVE_PAD_REQUEST,
_( "Move" ), move_pad_xpm );
ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_DRAG_PAD_REQUEST,
_( "Drag" ), drag_pad_xpm );
ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_EDIT_PAD,
_( "Edit" ), options_pad_xpm );
sub_menu_Pad->AppendSeparator();
ADD_MENUITEM_WITH_HELP( sub_menu_Pad, ID_POPUP_PCB_IMPORT_PAD_SETTINGS,
_( "Copy Current Settings to this Pad" ),
wxEmptyString,
options_new_pad_xpm );
ADD_MENUITEM_WITH_HELP( sub_menu_Pad, ID_POPUP_PCB_EXPORT_PAD_SETTINGS,
_( "Copy this Pad Settings to Current Settings" ),
wxEmptyString,
export_options_pad_xpm );
ADD_MENUITEM_WITH_HELP( sub_menu_Pad, ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS,
_( "Global Pads Edition" ),
_( "Copy this pad settings to all pads in this footprint (or similar footprints)" ),
global_options_pad_xpm );
sub_menu_Pad->AppendSeparator();
ADD_MENUITEM( sub_menu_Pad, ID_POPUP_PCB_DELETE_PAD,
_( "Delete" ), delete_pad_xpm );
if( m_HTOOL_current_state == ID_TOOLBARH_PCB_MODE_TRACKS )
{
menu->Append( ID_POPUP_PCB_AUTOROUTE_PAD, _( "Autoroute Pad" ) );
menu->Append( ID_POPUP_PCB_AUTOROUTE_NET, _( "Autoroute Net" ) );
}
MODULE* module = (MODULE*) Pad->GetParent();
if( module )
{
menu->AppendSeparator();
createPopUpMenuForFootprints( module, menu );
}
}
/*****************************************************************************/
void WinEDA_PcbFrame::createPopUpMenuForTexts( TEXTE_PCB* Text, wxMenu* menu )
/*****************************************************************************/
/* Create pop menu for pcb texts */
{
wxMenu* sub_menu_Text;
int flags = Text->m_Flags;
wxString msg = Text->MenuText( GetBoard() );
sub_menu_Text = new wxMenu;
ADD_MENUITEM_WITH_SUBMENU( menu, sub_menu_Text, -1, msg, add_text_xpm );
if( !flags )
{
msg = AddHotkeyName( _( "Move" ), g_Board_Editor_Hokeys_Descr, HK_MOVE_ITEM );
ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST,
msg, move_text_xpm );
}
msg = AddHotkeyName( _( "Rotate" ), g_Board_Editor_Hokeys_Descr, HK_ROTATE_ITEM );
ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_ROTATE_TEXTEPCB,
msg, rotate_pos_xpm );
msg = AddHotkeyName( _( "Edit" ), g_Board_Editor_Hokeys_Descr, HK_EDIT_ITEM );
ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_EDIT_TEXTEPCB,
msg, edit_text_xpm );
sub_menu_Text->AppendSeparator();
ADD_MENUITEM( sub_menu_Text, ID_POPUP_PCB_DELETE_TEXTEPCB,
_( "Delete" ), delete_text_xpm );
}
/**********************************************************************/
void WinEDA_PcbFrame::createPopUpMenuForMarkers( MARKER_PCB* aMarker, wxMenu* aPopMenu )
/**********************************************************************/
{
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_DELETE_MARKER, _( "Delete Marker" ), delete_xpm );
ADD_MENUITEM( aPopMenu, ID_POPUP_PCB_GETINFO_MARKER, _( "Marker Error Info" ), info_xpm );
}
/*******************************************************/
static wxMenu* Append_Track_Width_List( BOARD* aBoard )
/*******************************************************/
/**
* Function Append_Track_Width_List
* creates a wxMenu * which shows the last used track widths and via diameters
* @return a pointeur to the menu
*/
{
wxString msg;
wxMenu* trackwidth_menu;
wxString value;
trackwidth_menu = new wxMenu;
trackwidth_menu->Append( ID_POPUP_PCB_SELECT_AUTO_WIDTH,
_( "Auto Width" ),
_(
"Use the track width when starting on a track, otherwise the current track width" ),
true );
if( aBoard->GetBoardDesignSettings()->m_UseConnectedTrackWidth )
trackwidth_menu->Check( ID_POPUP_PCB_SELECT_AUTO_WIDTH, true );
if( aBoard->m_ViaSizeSelector != 0
|| aBoard->m_TrackWidthSelector != 0
|| aBoard->GetBoardDesignSettings()->m_UseConnectedTrackWidth )
trackwidth_menu->Append( ID_POPUP_PCB_SELECT_USE_NETCLASS_VALUES,
_( "Use Netclass Values" ),
_( "Use track and via sizes from their Netclass values" ),
true );
for( unsigned ii = 0; ii < aBoard->m_TrackWidthList.size(); ii++ )
{
value = ReturnStringFromValue( g_UserUnit, aBoard->m_TrackWidthList[ii],
PCB_INTERNAL_UNIT, true );
msg.Printf( _( "Track %s" ), GetChars( value ) );
if( ii == 0 )
msg << _( " (use NetClass)" );
trackwidth_menu->Append( ID_POPUP_PCB_SELECT_WIDTH1 + ii, msg, wxEmptyString, true );
}
if( aBoard->GetBoardDesignSettings()->m_UseConnectedTrackWidth )
trackwidth_menu->Check( ID_POPUP_PCB_SELECT_AUTO_WIDTH, true );
else
{
if( aBoard->m_TrackWidthSelector < aBoard->m_TrackWidthList.size() )
trackwidth_menu->Check( ID_POPUP_PCB_SELECT_WIDTH1 + aBoard->m_TrackWidthSelector,
true );
}
trackwidth_menu->AppendSeparator();
for( unsigned ii = 0; ii < aBoard->m_ViasDimensionsList.size(); ii++ )
{
value = ReturnStringFromValue( g_UserUnit, aBoard->m_ViasDimensionsList[ii].m_Diameter,
PCB_INTERNAL_UNIT, true );
wxString drill = ReturnStringFromValue( g_UserUnit,
aBoard->m_ViasDimensionsList[ii].m_Drill,
PCB_INTERNAL_UNIT, true );
if( aBoard->m_ViasDimensionsList[ii].m_Drill <= 0 )
msg.Printf( _( "Via %s" ), GetChars( value ) );
else
{
msg.Printf( _( "Via %s; (drl %s)" ), GetChars( value ), GetChars( drill ) );
}
if( ii == 0 )
msg << _( " (use NetClass)" );
trackwidth_menu->Append( ID_POPUP_PCB_SELECT_VIASIZE1 + ii, msg, wxEmptyString, true );
}
if( aBoard->m_ViaSizeSelector < aBoard->m_ViasDimensionsList.size() )
trackwidth_menu->Check( ID_POPUP_PCB_SELECT_VIASIZE1 + aBoard->m_ViaSizeSelector, true );
return trackwidth_menu;
}