kicad/bitmaps_png/CMakeLists.txt

904 lines
22 KiB
CMake

# This program source code file is part of KICAD, a free EDA CAD application.
#
# Copyright (C) 2011 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
# Copyright (C) 2011-2022 Kicad Developers, see AUTHORS.txt for contributors.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, you may find one here:
# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
# or you may search the http://www.gnu.org website for the version 2 license,
# or you may write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
#
# In this directory, a number of different processes are managed:
#
# 1) PNG files are created from SVG files for each icon theme and needed bitmap resolution
# 2) An images.tar.gz file is created from all the PNG files
# Step 2) is universal and is done for any builder, whereas step 1) is
# optional and depend on MAINTAIN_PNGS being defined in CMake. The reason we
# can skip 1) is that the *.PNG files are part of the source tree so
# do not need to rebuilt by a typical builder. However, because the *.PNG files
# are part of the source tree, and subject to version control, they should be built
# only when needed, otherwise this results in a diff for the version control system.
# Therefore step 1) is driven by CMake (if MAINTAIN_PNGS) which gives
# us conditional *.PNG building based on an edit to the respective *.SVG file.
# If MAINTAIN_PNGS is not defined, then you are a normal builder and no special
# tools are required. If MAINTAIN_PNGS is defined, then you are a PNG maintainer
# and will need the following tools findable in your PATH:
#
# 1) inkscape - command line mode is used, must be on your PATH
# 2) pngcrush - this program must be on your PATH
#
# lower case is used for local variables, uppercase for global variables
option( MAINTAIN_PNGS
"Set to true if you are a PNG maintainer and have the required tools given in the bitmaps_png/CMakeLists.txt file (default OFF)."
OFF)
# Used Only to maintain PNG files (and therefore to recreate .cpp files)
# The png2cpp creates files with native End of Line format.
# List of themes - each corresponds to a folder of SVGS in ./bitmaps_png/sources/
set( THEMES
light
dark )
# Plan for three sizes of bitmaps:
# SMALL - for menus - 16 x 16
# MID - for toolbars - 24 x 24
# BIG - for program icons - 48 x 48
# which are given on three basename lists: BMAPS_SMALL, BMAPS_MID,and BMAPS_BIG
# respectively. The basename is without file extension and without path.
# A corresponding ${basename}.svg file must exist in 'sources' dir below here.
# small icons (16x16) needed in listboxes and dialog buttons
set( BMAPS_SMALL
icon_bitmap2component_16
icon_eeschema_16
icon_gerbview_16
icon_kicad_16
icon_kicad_nightly_16
icon_libedit_16
icon_modedit_16
icon_pagelayout_editor_16
icon_pcbcalculator_16
icon_pcbnew_16
label_align_left
label_align_right
label_align_top
label_align_bottom
list_nets_16
options_generic_16
pinorient_right
pinorient_left
pinorient_up
pinorient_down
pinshape_normal
pinshape_invert
pinshape_clock_normal
pinshape_clock_invert
pinshape_active_low_input
pinshape_clock_active_low
pinshape_active_low_output
pinshape_clock_fall
pinshape_nonlogic
pintype_input
pintype_output
pintype_bidi
pintype_3states
pintype_passive
pintype_notspecif
pintype_powerinput
pintype_poweroutput
pintype_opencoll
pintype_openemit
pintype_nic
pintype_noconnect
small_down
small_edit
small_folder
small_library
small_plus
small_refresh
small_trash
small_up
small_warning
text_horizontal
text_vertical
text_align_left
text_align_center
text_align_right
text_align_bottom
text_align_middle
text_align_top
text_valign_top
text_valign_center
text_valign_bottom
text_bold
text_italic
text_mirrored
tree_nosel
tree_sel
visibility
visibility_off
www
)
# image basenames that go into the toolbar sized destinations, i.e. 24x24
set( BMAPS_MID
about
add_aligned_dimension
add_arc
add_board
add_bus2bus
add_bus
add_center_dimension
add_class_flag
add_circle
add_component
add_corner
add_dashed_line
add_document
add_glabel
add_graphical_segments
add_graphical_polygon
add_hierarchical_label
add_hierar_pin
add_hierarchical_subsheet
add_junction
add_keepout_area
add_label
add_leader
add_library
add_line2bus
add_line_label
add_line
add_orthogonal_dimension
add_pcb_target
add_power
add_radial_dimension
add_rectangle
add_symbol_to_schematic
add_textbox
add_tracks
add_via
add_zone_cutout
add_zone
align_items
align_items_left
align_items_right
align_items_top
align_items_bottom
align_items_center
align_items_middle
anchor
annotate_down_right
annotate_right_down
annotate
apply_pad_settings
array
auto_associate
auto_track_width
autoplace_fields
axis3d_back
axis3d_bottom
axis3d_front
axis3d_left
axis3d_right
axis3d_top
axis3d
break_line
bug
bus_definition_tool
cancel
change_entry_orient
contrast_mode
curved_ratsnest
checked_ok
color_materials
component_select_unit
config
convert
copy
copy_pad_settings
cursor_shape
cursor
custom_pad_to_primitives
cut
datasheet
delete_association
delete_cursor
delete_gerber
delete_sheet
directory
directory_browser
directory_open
distribute_horizontal
distribute_vertical
down
drag
drag_segment_withslope
drc
duplicate
edit_comp_footprint
edit_comp_ref
edit_comp_value
editor
edit_cmp_symb_links
edit
edge_to_copper_clearance
enter_sheet
ercerr
erc_green
ercwarn
erc
exit
exchange
export3d
export_cmp
export_dsn
export_idf
export_file
export_footprint_names
export_module
export_part
export_png
export_step
export_svg
export_to_pcbnew
fabrication
file_bom
file_drl
file_dsn
file_gbr
file_gerber_job
file_html
file_idf
file_pdf
file_pos
file_svg
fill_zone
filter
find
find_replace
flag
flip_board
gbr_select_mode2
gerbview_show_negative_objects
general_deletions
general_ratsnest
grid_select
grid_select_axis
grid
group
group_enter
group_leave
group_remove
group_ungroup
help
help_online
hidden_pin
hide_ratsnest
hierarchy_nav
hotkeys
hole_to_hole_clearance
hole_to_copper_clearance
hv45mode
icon_cvpcb_24
icon_footprint_browser
icon_gerbview_24
icon_pcm_24
import3d
image
import_brd_file
import_document
import_footprint_names
import_hierarchical_label
import_module
import_part
import_project
import_vector
import
info
insert_module_board
language
layers_manager
leave_sheet
left
libedit
lib_next
lib_previous
library_browser
library_archive
library_archive_as
library
library_table
lines_any
lines90
list_nets
load_drill
load_gerber
load_module_board
lock_unlock
locked
measurement
pcb_target
mirror_h
mirror_v
mode_module
module_editor
module_wizard
module_filtered_list
module_options
module_pin_filtered_list
module_library_list
module
morgan1
morgan2
move_exactly
move
move_relative
mw_add_gap
mw_add_line
mw_add_shape
mw_add_stub_arc
mw_add_stub
net_highlight
net_highlight_schematic
netlist
new_component
new_footprint
new_generic
new_library
new_project
noconn
normal
open_project
options_3drender
options_board
options_generic
options_pad
options_schematic
opt_show_polygon
ortho
pad_sketch
pad
pad_enumerate
pad_number
pads_mask_layers
pads_remove
path
pagelayout_normal_view_mode
pagelayout_special_view_mode
part_properties
paste
paste_special
pin2pin
pin_size_to
pin_show_etype
pin_table
pin
plot
polar_coord
post_bom
post_compo
post_d356
post_drill
post_gencad
post_gerber
post_rpt
preference
print_button
project
project_close
project_kicad
ps_diff_pair
ps_diff_pair_gap
ps_diff_pair_tune_length
ps_diff_pair_tune_phase
ps_tune_length
push_pad_settings
puzzle_piece
py_script
recent
redo
refresh
reload
render_mode
rescue
right
router_len_tuner
router_len_tuner_setup
router_len_tuner_amplitude_decr
router_len_tuner_amplitude_incr
router_len_tuner_dist_decr
router_len_tuner_dist_incr
rotate_ccw
rotate_cw
rotate_ccw_x
rotate_cw_x
rotate_ccw_y
rotate_cw_y
rotate_ccw_z
rotate_cw_z
save_as
save
select_layer_pair
select_w_layer
select_same_sheet
shape_3d
shape_3d_back
sheetset
simulator
sim_run
sim_stop
sim_tune
sim_probe
sim_add_signal
search_tree
set_origin
show_dcodenumber
show_footprint
show_mod_edge
show_ratsnest
showtrack
show_other
show_tht
show_smt
show_zone
show_zone_disable
show_zone_outline_only
show_zone_triangulation
show_all_layers
show_no_layers
show_no_copper_layers
show_all_copper_layers
show_all_front_layers
show_all_back_layers
show_front_assembly_layers
show_back_assembly_layers
special_tools
spreadsheet
swap_layer
switch_corner_rounding_shape
text
text_sketch
thermal_spokes
three_d
tool_ratsnest
tools
trash
undo
unit_inch
unit_mil
unit_mm
unknown
unlocked
unzip
up
update_pcb_from_sch
update_sch_from_pcb
via
via_annulus
via_buried
via_microvia
via_sketch
via_diameter
via_hole_diameter
width_track_via
width_track
zip
zone_duplicate
zone_fillet
zone_unfill
zoom_area
zoom_auto_fit_in_page
zoom_fit_in_page
zoom_fit_to_objects
zoom_center_on_screen
zoom_in
zoom_out
zoom_selection
)
# 24 x 24 for internal icons
set( BMAPS_24
icon_bitmap2component_24
icon_eeschema_24
icon_gerbview_24
icon_libedit_24
icon_modedit_24
icon_pagelayout_editor_24
icon_pcbcalculator_24
icon_pcbnew_24
)
# 32 x 32 for icon sets
set( BMAPS_32
icon_bitmap2component_32
icon_eeschema_32
icon_gerbview_32
icon_kicad_32
icon_kicad_nightly_32
icon_libedit_32
icon_modedit_32
icon_pagelayout_editor_32
icon_pcbcalculator_32
icon_pcbnew_32
)
# 48 x 48 for now
set( BMAPS_BIG
dialog_warning
icon_3d
icon_cvpcb
icon_eeschema
icon_gerbview
icon_kicad
icon_kicad_nightly
icon_libedit
icon_modedit
icon_pcbnew
icon_bitmap2component
icon_pagelayout_editor
icon_pcbcalculator
icon_pcm
reannotate_down_left
reannotate_down_right
reannotate_left_down
reannotate_left_up
reannotate_right_down
reannotate_right_up
reannotate_up_left
reannotate_up_right
icon_pagelayout_editor
wizard_add_fplib_icon
)
# 64 x 64 for icon sets
set( BMAPS_64
icon_cvpcb
icon_eeschema
icon_gerbview
icon_kicad
icon_kicad_nightly
icon_libedit
icon_modedit
icon_pcbnew
icon_pagelayout_editor
icon_bitmap2component
icon_pcbcalculator
)
# 128 x 128 for icon sets
set( BMAPS_128
icon_cvpcb
icon_eeschema
icon_gerbview
icon_kicad
icon_kicad_nightly
icon_libedit
icon_modedit
icon_pcbnew
icon_pagelayout_editor
icon_bitmap2component
icon_pcbcalculator
)
# Images in this section are generated at whatever resolution is set in the source SVG file
# Use Inkscape Document Properties > Custom Size to set (make sure units are pixels)
# These are used for images in the UI that are not-square or very large (infographics, etc)
set( BMAPS_OTHER
att_bridge
att_pi
att_splitter
att_tee
c_microstrip
coax
color_code_multiplier
color_code_tolerance
color_code_value
color_code_value_and_name
cpw
cpw_back
microstrip
microstrip_zodd_zeven
pads_npth
pads_npth_bottom
pads_npth_top
pads_npth_top_bottom
pads_remove_unused
pads_remove_unused_keep_bottom
pads_reset_unused
rectwaveguide
regul
regul_3pins
stripline
stroke_dash
stroke_dashdot
stroke_dashdotdot
stroke_dot
stroke_solid
teardrop_sizes
teardrop_rect_sizes
teardrop_track_sizes
tune_diff_pair_length_legend
tune_diff_pair_skew_legend
tune_single_track_length_legend
twistedpair
viacalc
)
# @todo keep these in sync with .bzrignore
set( TMP_DIR "${CMAKE_CURRENT_BINARY_DIR}/tmp" )
# true to generate log files, false to build icon files only
# generate logs is useful only if you have problems
set( CREATE_LOG_FILES false )
set( BITMAP_INFO_FILE "${CMAKE_SOURCE_DIR}/include/bitmaps/bitmap_info.h" )
set( BITMAP_INFO_TEMPLATE "${CMAKE_SOURCE_DIR}/include/bitmaps/bitmap_info.h.in" )
set( BITMAP_INFO_LIST "" )
set( ALL_PNGS "" )
function( svg2png inputFile outFile pngWidth pngHeight )
#message( "svg2png( inputFile: ${inputFile} outFile: ${outFile} pngWidth: ${pngWidth} pngHeight: ${pngHeight})")
if( CREATE_LOG_FILES )
set( logfile "${TMP_DIR}/${bmn}.inkscape.log" )
else()
if( MSVC )
set( logfile "nul" )
else()
set( logfile "null" )
endif()
endif()
if( ${pngWidth} EQUAL -1 )
set( sizeArgs --export-area-page )
else()
set( sizeArgs -w ${pngWidth} -h ${pngHeight} )
endif()
add_custom_command(
OUTPUT ${outFile}
# this Inkscape command line is for old Inkscape version < 1.0
# COMMAND ${Inkscape_EXECUTABLE} --without-gui --export-area-snap -f ${inputFile} --export-png ${outFile} -w ${pngWidth} -h ${pngHeight} > ${logfile}
# this Inkscape command line is for Inkscape >= 1.0
COMMAND ${Inkscape_EXECUTABLE} --export-area-snap --export-type=png ${inputFile}
--export-filename ${outFile} ${sizeArgs} > ${logfile}
DEPENDS ${inputFile}
COMMENT "Creating ${pngHeight} pixel tall ${outFile}"
VERBATIM
)
endfunction()
# Function png2png
# converts a basic PNG to one
function( png2png inputFile outFile )
if( CREATE_LOG_FILES )
set( logfile "${TMP_DIR}/${bmn}.pngcrush.log" )
else()
if( MSVC )
set( logfile "nul" )
else()
set( logfile "null" )
endif()
endif()
add_custom_command(
OUTPUT ${outFile}
# pngcrush all icons without background to remove any extraneous text records.
COMMAND ${pngcrush_EXECUTABLE} -rem alla ${inputFile} ${outFile} > ${logfile}
DEPENDS ${inputFile}
COMMENT "Creating cleaned file ${outFile}"
)
endfunction()
# Function png2cpp
# converts a single *.png to *.cpp
function( png2cpp inputFile outFile )
add_custom_command(
OUTPUT ${outFile}
COMMAND ${CMAKE_COMMAND} -DinputFile=${inputFile} -DoutCppFile=${outFile}
-P ${CMAKE_MODULE_PATH}/BuildSteps/PNG2cpp.cmake
DEPENDS ${inputFile} ${CMAKE_MODULE_PATH}/BuildSteps/PNG2cpp.cmake
COMMENT "Creating ${outFile}"
)
endfunction()
# Function bitmap_dir
# Creates build targets for all the source SVGs in the given list, output at the given resolution
# Will create targets for each theme in the THEMES list.
# A height of -1 means to export with the page area rather than scaling to a given resolution.
# This is used for the BMAPS_OTHER list which have varying output sizes.
function( bitmap_dir pngWidth pngHeight bmapList )
set( pngDir "${CMAKE_CURRENT_SOURCE_DIR}/png" )
file( MAKE_DIRECTORY ${pngDir} )
#file( REMOVE_RECURSE ${TMP_DIR} )
file( MAKE_DIRECTORY ${TMP_DIR} )
foreach( theme ${THEMES} )
if( NOT ${theme} STREQUAL "light" )
set( themeTag "_${theme}" )
else()
set( themeTag "" )
endif()
if( ${pngHeight} EQUAL -1 )
set( heightTag "" )
else()
set( heightTag "_${pngHeight}" )
endif()
foreach( bmn ${bmapList} )
set( svgFile "${CMAKE_CURRENT_SOURCE_DIR}/sources/${theme}/${bmn}.svg" )
set( pngFile "${bmn}${themeTag}${heightTag}.png" )
set( pngPath "${pngDir}/${pngFile}" )
set( tmpFile "${TMP_DIR}/${pngFile}" )
if( NOT EXISTS ${svgFile} )
message( "Warning: Source SVG ${svgFile} does not exist!" )
continue()
endif()
#svg2png( inputFile outFile pngWidth pngHeight )
svg2png( ${svgFile} ${tmpFile} ${pngWidth} ${pngHeight} )
#png2png( inputFile outFile )
png2png( ${tmpFile} ${pngPath} )
set( bitmapInfo
" { BITMAPS::${bmn}, wxT( \"${pngFile}\" ), ${pngHeight}, wxT( \"${theme}\" ) },\n"
)
set( BITMAP_INFO_LIST "${BITMAP_INFO_LIST}${bitmapInfo}" )
list( APPEND ALL_PNGS ${pngPath} )
endforeach()
endforeach()
set( ALL_PNGS ${ALL_PNGS} PARENT_SCOPE )
set( BITMAP_INFO_LIST ${BITMAP_INFO_LIST} PARENT_SCOPE )
endfunction()
include( FindUnixCommands )
if( TAR STREQUAL "TAR-NOTFOUND" )
# CMake on Windows CI seems to struggle to find tar even though it's in PATH
# Let's help it out as modern windows (Server 2019 and 10 provide tar)
if( MSVC )
# yolo
set( TAR "C:\\Windows\\System32\\tar.exe" )
else()
message( FATAL_ERROR "Could not find the tar program." )
endif()
endif()
set( BITMAP_ARCHIVE_PATH ${CMAKE_BINARY_DIR}/resources/images.tar.gz )
if( NOT ALL_PNGS )
file( GLOB_RECURSE ALL_PNGS ${CMAKE_CURRENT_SOURCE_DIR}/png/*.png )
endif()
if( MINGW )
# This seems like a huge hack, but I can't find a better way. If anyone else does, please
# feel free to replace this with it...
file( TO_CMAKE_PATH "${BITMAP_ARCHIVE_PATH}" TAR_OUTPUT_FILE )
string( REGEX REPLACE "^([a-zA-Z]):/" "/\\1/" TAR_OUTPUT_FILE "${TAR_OUTPUT_FILE}" )
else()
set( TAR_OUTPUT_FILE "${BITMAP_ARCHIVE_PATH}" )
endif()
add_custom_target( bitmap_archive ALL
COMMAND ${TAR} cfz "${TAR_OUTPUT_FILE}" .
DEPENDS ${ALL_PNGS}
BYPRODUCTS ${BITMAP_ARCHIVE_PATH}
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/png
COMMENT "Creating image archive ${TAR_OUTPUT_FILE}"
VERBATIM
)
install( FILES ${BITMAP_ARCHIVE_PATH}
DESTINATION ${KICAD_DATA}/resources
)
if( MAINTAIN_PNGS )
# Inkscape is required to convert SVG files to PNG files.
set( Inkscape_FOUND FALSE )
if( NOT Inkscape_FOUND )
find_program( Inkscape_EXECUTABLE inkscape
PATHS "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\Inkscape;InstallDir]" "$ENV{PROGRAMFILES}\\Inkscape\\bin"
DOC "Inkscape vector drawing program." )
if( NOT Inkscape_EXECUTABLE )
message( FATAL_ERROR "Could not find the Inkscape vector drawing program." )
else( NOT Inkscape_EXECUTABLE )
set( Inkscape_FOUND TRUE )
set( Inkscape_EXECUTABLE ${Inkscape_EXECUTABLE}
CACHE FILEPATH "Path and file name of the Inkscape program." )
message( STATUS "The Inkscape vector drawing program found." )
endif( NOT Inkscape_EXECUTABLE )
endif( NOT Inkscape_FOUND )
# pngcrush is required to reduce the size of the converted PNG files.
set( pngcrush_FOUND FALSE )
if( NOT pngcrush_FOUND )
find_program( pngcrush_EXECUTABLE pngcrush DOC "The PNG size reduction program." )
if( NOT pngcrush_EXECUTABLE )
message( FATAL_ERROR "Could not find the pngcrush PNG size reduction program." )
else( NOT pngcrush_EXECUTABLE )
set( pngcrush_FOUND TRUE )
set( pngcrush_EXECUTABLE ${pngcrush_EXECUTABLE}
CACHE FILEPATH "Path and file name of the pngcrush program." )
message( STATUS "The pngcrush PNG size reduction program found." )
endif( NOT pngcrush_EXECUTABLE )
endif( NOT pngcrush_FOUND )
# these 3 cmake commands for each desired bitmap size set, repeat as needed:
bitmap_dir( 16 16 "${BMAPS_SMALL}" )
bitmap_dir( 24 24 "${BMAPS_MID}" )
bitmap_dir( 32 32 "${BMAPS_32}" )
bitmap_dir( 22 22 "${BMAPS_22}" )
bitmap_dir( 24 24 "${BMAPS_24}" )
bitmap_dir( 64 64 "${BMAPS_64}" )
bitmap_dir( 128 128 "${BMAPS_128}" )
bitmap_dir( 48 48 "${BMAPS_BIG}" )
bitmap_dir( -1 -1 "${BMAPS_OTHER}" )
configure_file( ${BITMAP_INFO_TEMPLATE} ${BITMAP_INFO_FILE} NEWLINE_STYLE UNIX )
add_custom_target( generate_pngs ALL
DEPENDS ${ALL_PNGS}
COMMENT "Creating PNGs from SVGs"
)
add_dependencies( bitmap_archive generate_pngs )
endif( MAINTAIN_PNGS )