haskal
/
kicad
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
kicad/CHANGELOG.txt

725 lines
34 KiB
Plaintext
Raw Blame History

KiCad ChangeLog 2009
====================
Please add newer entries at the top, list the date and your name with
email address.
2009-Sep-10 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
More NETCLASS work, started on the UI also. Almost done. Put NETCLASS support
into DRC. Fixed DRC dialog so progress during DRC is sensible and visible.
The specctra_export probably still needs a little work regarding VIAs.
Don't install this version of PCBNEW if you need stability. You can compile
and look but I would not install it quite yet. I compiled wxformbuilder
from source, so you may need to upgrade to load my *.fbp files.
Jean-Pierre @ todo: pcbnew/zones_test_and_combine_areas.cpp needs to
use NETCLASS and not g_DesignSettings.m_TrackClearance
2009-sept-10 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew
Work on undo/redo in pcbnew finished.
Switch to kbool V2.0. This version solves some problems in zones calculations but not all.
The Kbool's author, Klaas Holveda, is still working on these problems
Thanks to Klaas
2009-aug-23 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew
Work on undo/redo in pcbnew almost finished.
2009-Aug-16 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
* first of my work on NETCLASSes, more to come.
wrote: BOARD* BOARD_ITEM::GetBoard(), int BOARD_CONNECTED_ITEM::GetClearance( BOARD_CONNECTED_ITEM* ),
rewrote: classes NETCLASS, NETCLASSES, BOARD::SynchronizeNetsAndNetClasses(),
added: NETCLASS::m_ViaDrillSize, NETCLASS::m_Description. Removed netname from
EQUIPOTs in *.brd file (were redundant with NETCLASSes in *.brd file). NETCLASSes
now follow EQUIPOTs in *.brd file.
NETs and NETCLASSes are linked by pointer from class NET.
BOARD::SynchronizeNetsAndNetClasses() will validate pointers, NETs and NETCLASSes.
* Pay particular attention to the new:
int BOARD_CONNECTED_ITEM::GetClearance( BOARD_CONNECTED_ITEM* aItem ) const
which considers two netclasses and finds the largest distance from the two
involved.
* I would love to see class NETINFO_ITEM renamed to NET.
2009-Aug-6 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
MsgPanel is dynamically sized based on system gui font. Before this fix
the window height was hardcoded and was too small on systems with large
fonts. See WinEDA_MsgPanel::GetRequiredHeight();
2009-aug-08 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew
Work on undo/redo in pcbnew in progress.
SEG_ZONE is now deprecated.
When a zone is fille by segment, the ZONE_CONTAINER handles these segments
2009-july-29 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew
Starting work on undo/redo in pcbnew.
Currently, undo redo commands are only delete one item (and only for some items)
2009-july-25 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++all
Rework on undo/redo and block functions
Better and simpler coding of block and undo/redo functions
The goal is to have the same functions in eeschema and pcbnew.
and have a full undo/redo in pcbnew.
2009-july-18 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew
First work about net classes. This is a work in progress and a moving target.
Manual routing and DRC do not use yet this feature
2009-Jul-13 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
added support to specctra import for the <structure_out> descriptor.
<route_descriptor> had confused <structure_descriptor> with the <structure_out_descriptor>
The fix facillitates round tripping from the TOPO-R router.
2009-july-10 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++Eeschema:
Enhanced netlist creation and ERC tests for component having multiple parts per package
Connecting power pins of all parts is no more needed.
Usually, these components have in schematic duplicated power pins.
Op amps having 4 parts have also 4 duplicated pins per power input,
and therefore the user must place 4 power symboles per physical power pin
Now Only one power is needed (now eeschema search for a connected pin
between duplicated power pins)
Note this is a work in progress because the ERC does not check if these duplicate
are connected to the *same* net.
2009-july-06 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++All:
Use a common class for markers in pcbnew and eeschema:
created a basic class called MARKER_BASE
class DRC_ITEM is also common to pcbnew and eeschema
class MARKER (in pcbnew) and class MARKER_SCH (eeschema) are derived
from this basic class.
The main goal is to use a common class for pcbnew and eeschema to handle
errors and to have similar dialogs
and have more comprehensive ERC messages errors in eeschema
This is a work in progress
2009-july-05 UPDATE Jerry Jacobs <jerkejacobs@gmail.com
================================================================================
+ Closing bug 2802441, No single error messages any more, 2009-06-07 over2there.
Fixed this both in eeschema and cvpcb, for now printing wxstring in a
messagebox. Should make a nice textctrl dialog.
+ Added cvpcb directory to Doxyfile
2009-june-19 UPDATE Jerry Jacobs <jerkejacobs@gmail.com>
================================================================================
Added Hauptmech patch.
I Updated doc to match this patch.
++Pcbnew:
> * Board thickness in the 3D view can be set in *.pcb files (hand edit)
> * Hotkey files bug: incorrect file extension as default in some open/save dialogs.
> * Hotkeys made available for pcbnew [add track] and [add module] tools.
> * Drag and Move hotkeys extended to drag tracks and move nodes/vias when the [add track] tool is active.
> * Show/Hide Invisible Text button added to lefthand menu
> * Dropdown list of clearance history available next to trackwidth history.
2009-june-18 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++Pcbnew:
Added: in DRC tests: tests for vias min size and tracks min width.
Added: Option to show the via area while creating a new track.
Useful in compact designs to know how to place a via during track creation.
2009-june-11 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++Eeschema:
Added text justification for graphic texts in libedit
Minor bug 2803506 fixed (error when mirroring bus entries)
Some code cleaning.
Better locating algo for arcs in libedit
2009-may-30 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++Eeschema:
Changes about thickness of lines in draw/plot functions.
Now there is only one thickness parameter for plot and print.
This is now the default thickness value,
used for items that have a line thickness = 0,
and NOT the minimum thickness.
reasons:
- Obviously, differents parameters to draw and plot are bad.
(what you plot is NOT what you see)
- small texts are not readable with an minimum thickness value
that could be good for others items.
2009-may-30 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++All:
Cleaned and optimized code about new hershey fonts and bold texts handling.
Bold texts use now the same font as normal texts.
Only the pen size used to draw them is bigger.
- The max pen size allowed depending on texts sizes is now tested
when loading boards and modules, and clamped if too large.
2009-may-28 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++Pcbnew:
Finished code cleaning about ratsnets calculations and handling
Obscure code removed ( I hope)
Better names for some members of BOARD class.
2009-may-24 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++Pcbnew:
clean code in ratsnet calculations (work in progress)
The old code was very difficukt to understand, and was sometime very ugly.
Mainly, the list of nets (RATSNEST_ITEM class, formerly EQUIPOT class)
are now handled in a std::vector, and not a linked list.
This is better, because nets identifiers for pads and tracks are a number called netcode.
now, this is the index of the given net in this list, and the code to find a net given by its netcode
is very fast.
2009-may-12 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++All:
Rework on TEXTE_PCB, SCH_TEXT and EDA_TextStruct classes.
Code seriously cleaned, obscure and duplicated code removed,
and some oddities removed ( like different .m_Orient values in eeschema and
pcbnew, for the same text orientation )
Multiline texts (in comments and Pcb texts) are now supported.
In pcbnew text justifications could work (but not yet used and tested)
2009-may-01 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew:
Better dialog options for zones on technical layers.
Zones on silk screen filled with segments are now plotted
Better support of multiline texts (work in progress)
2009-apr-25 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++ Eeschema:
When annotating: tests and repairs bad (duplicated) time stamps.
Can be found in old schematics or converted from others tools ...
2009-apr-24 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++Pcbnew:
Fixed: fully broken netlist import from eeschema when using time stamp.
(normal operation worked fine)
Added: alawys print diags in dialog window when reading a netlist
2009-apr-17 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++ALL:
Code clarification: There were 3 functions to display info:
- DisplayInfo (displaying a message info)
- class members DisplayInfo and Display_Infos doing the same thing
(and sometimes these 2 functions were existing in some classes)
This was *very* confusing and created minor bugs
(info in eeschema was not always displayed, because the "bad" function was used)
Now DisplayInfo is renamed DisplayInfoMessage
Ann class member DisplayInfo is used in all classes ( replaces all Display_Infos instances)
2009-apr-12 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++eeschema:
Default libraries path are now differents for pcbnew and eeschema (as it do)
Fixed: bad library search path for schematic component docs (docs were not found)
Added: display actual lib paths in eeschema lib config dialog.
These next fix give the same behavior than "old" version
Use relative paths in libraries and doc filenames when possible
i.e when a file is found in a sub path in a default path
(very important for Windows/linux/mac compatibility of projects and their configs)
TODO: allows user to add paths in list. Currently the user path for lib is broken
(but the new code could allow the user to add more than one user path)
TODO: do the same for pcbnew and cvpcb
2009-apr-10 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++eeschema:
- Viewlib: listboxes for lib or component selection are now resizable
- library cache name changed from <root_name>.cache.lib to <root_name>-cache.lib
Needed by the new code using wxFileName.
When wxFileName calculate the filename, it returns <root_name>,
and the old code returns <root_name>.cache
So to avoid problems or ugly code, the lib cache name is now <root_name>-cache
Old cache is used if the lib cache with the new name is not found.
2009-apr-07 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew:
fixed: bug 2738052 (Delete tool does not delete zones outlines)
++eeschema:
fixed: void history file list in menu
++All:
made GetAssociatedDocument() compatible with last changes in kicad path handling.
Get PDF doc associated with a component now works
Some work still needed.
2009-apr-06 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++common:
overbar patch merged in drawtxt.cpp and mainly in eechema/class_pin.cpp
some cleanup and some compiling problems fixed.
++eeschema:
changed dialog_eeschema_config.cpp to use wxFormBuilder to create
the corresponding equivalent dialog in dialog_eeschema_config_fbp.cpp
2009-apr-05 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
++All
* Removed all instances #ifdef eda_global, COMMON_GLOBL, and MAIN in order
to unobfuscate global variables.
* Moved global variables common to all applications into common.cpp.
* Moved global variables common to Pcbnew, Gerbview, and Cvpcb into
pcbcommon.cpp.
* Create pcbcommon library to prevent compiling shared PCB drawing object
files multiple times.
* Replaced round() with wxRound and eliminate MSVC specific implementation.
* Moved project configuration files into the application class.
* Moved editor name global variable into the application class.
* Created load and save settings methods for basic frame class and begin
putting global variables in the class where they are used.
* Start replacing obsolete wxWidgets file functions and redundant Kicad
file name manipulation code with wxFileName.
* Initial library search path implementation using wxPathList.
* Define correct wxFileDialog wild cards.
* Apply patch Fix typo in about box to keep MAC folks happy.
* Lots of general code clean up, spelling error fixes, and uncrustification.
* Renamed Affiche_Status_Box to UpdateStatusBar.
++EESchema
* Defined Load() method so library file drawing objects can load themselves.
* Defined GetBoundingBox() method so library file drawing objects can
calculate their own bounding box.
* Fix arc library drawing object bounding box calculation.
* Remember last import and export library path in library editor.
* Add new library search path support.
++Kicad
* Eliminate the one giant case statement to rule them all command event
handler and create per command event handlers.
++CvPcb
* Add new library search path support.
* Add message dialogs to prompt user of library file load errors instead of
failing silently.
* Fix NULL pointer bug were display frame would crash CvPcb when
WinEDA_DisplayFrame::Get_Module() could not find foot print module.
++PcbNew
* Add new library search path support.
* Add message dialogs to prompt user of library file load errors instead of
failing silently.
2009-mar-30 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++pcbnew:
added BOM generator (in postprocess menu)
2009-mar-28 UPDATE Jean-Pierre Charras <jean-pierre.charras@gipsa-lab.inpg.fr>
================================================================================
++All
code cleanup in project_config.cpp.
Now parameters common to all projects are saved on exit.
(they are usally options like colors, draw options ...)
++pcbnew:
added option to show or not netnames on pads and tracks
2009-mar-23 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
in DRC: added test pads to holes.
++Al:
minor changes.
2009-mar-16 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
Fixed:
bug that crashes pcbnew when removing all footprints
(in connection calculations, pointers to pads not reset)
bug that crashes pcbnew when filling a zone
if a module has a trapezoidal pad
(trapezoidal pads are not yet implemented in zone filling,
they are now calculated as rect shape (todo: a better handling) )
2009-mar-12 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++eeschema:
Added: option to print ALL users fields in B.O.M.,
so if more than 8 fields, they are printed. (issue 2680640)
++pcbnew:
Added 5 metric grids (1mm, 0.5mm 0.25mm 0.2mm and 0.1mm) in default grid list.
Minor bug in drill map creation (PS format) fixed
2009-mar-11 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
fixed: a bug that can delete an existing zone after creating a new zone,
if the new zone contains this existing zone
This is a DRC error, buf can be temporary possible when creating complex zones
2009-mar-10 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
++gerbview:
print,plot: error message displayed when no layer selected.
2009-Mar-5 UPDATE Vesa Solonen <vesa.solonen@hut.fi>
================================================================================
++pcbnew:
bug fix in zones_convert_brd_items_to_polygons.cpp:
Fixes "thermal stub bleed" in zone fill. Small (compared to thermal width) pads are handled properly now.
2009-mar-05 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
bug fix in move_or_drag_track.cpp:
function SortTrackEndPoints() broken: does not handle pointers to pads for start and end and flags relative to these pointers
MergeCollinearTracks( ) broken, because it merge segments having different width or without any connectivity test.
2 collinear segments can be merged only in no other segment or vais is connected to the common point
and if they have the same width. See cleanup.cpp for merge functions
These functions break the connectivity calculations.
So they are temporary disabled (see my comments in these functions)
bug fix in Marque_Une_Piste(): the last segments created can be see as part of the flagged track:
so delete track (or edit track width) deletes the track and some others segments (last created)
bug fix 2660689 Unconnected pads in RC4. Also fixed some no deletion of the old track when creating a new track
2009-Feb-25 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
++EESchema
* Fixed hot key bug that caused undo and redo events in the library editor
to be passed to the schematic frame. Fixes bug #1896790.
* Fixed hot key bug that allowed new wire to be placed during block move
causing a manage cursor message box to pop up.
* Fixed hot key bug that allows an object in block to be deleted during
a move or drag operation.
2009-Feb-25 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
* Markers were not shown when on top of a high-lighted pad. Moved highlight
drawing function into class BOARD and out of Frame. Call BOARD::DrawHighLight() from
within BOARD::Draw() to fix.
* Gerbers were not generated if you had EDGE_MODULEs on a copper layer, such as in
a MuWaveBasicShape. The line thickness was not being put into the gerber via a DCODE.
These gerber files were bad, and geda gerbv would also complain.
* A few window titles were not conformant with UIpolicies.txt.
* You could not load a *.pro file from another project into PCBNEW if your current
project had none. Changed wildcard mask.
* Deleted gen_self.h and moved that code into muonde.cpp
2009-Feb-24 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
* dialog boxes calling OnInitDialog are flashing because these functions
change the size of controls that are already on screen. This leads to
an annoying resize operation. So I renamed OnInitDialog(event) to
void init() and call it from the constructors. Did this for
dialog_general_options.cpp and dialog_display_options.
* dialog_general_options was not setting g_MagneticPadOption and g_MagneticTrackOption
2009-Feb-24 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
bug fix:
2628615 Error message after right click into zone
2625434 Crash after trying to edit a line/drawing
++cvpcb
fix: 2625090 CVpcb - language selection
2009-Feb-17 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++gr_basic.cpp
Added: Function ClipAndDrawFilledPoly()
Used to clip a polygon and display it as Filled Polygon
uses the Sutherland and Hodgman algo to clip the given poly against a rectangle.
This rectangle is the drawing area
this is useful under Linux (2009) because filled polygons are incorrectly drawn
if they have too large coordinates (seems due to integer overflows in calculations)
Could be removed in some years, if become unnecessary.
2009-Feb-17 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
Loading a module into the module editor was changing the layer count
of a loaded board. This is because void WinEDA_ModuleEditFrame::Process_Special_Functions( wxCommandEvent& event )
calls bool WinEDA_BasePcbFrame::Clear_Pcb( bool query )
which then sets the global g_DesignSettings.m_CopperLayerCount = 2;
This is terrible.
We need a layer count in each board, not as a global. For now, comment out the assignment in initpcb.cpp.
2009-Feb-17 Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
Dialog track options redesigned with wxFormBuilder
Alt via drill renamed Specific via drill in dialog and popup menu.
Added tips in dialog.
2009-Feb-09 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++eeschema
Changed dialog_edit_label so that it is UIpolicies.txt compliant. Proper case
on window titles, resizeable dialog border, minimum text width handling.
2009-Feb-7 Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++All:
change grid size type from integer to double (using wxRealPoint insteed of wxSize)
This is mandatory in Pcbnew to handle metric user grids without error
(was unusable before, using integer grid size).
A lot of footprints uses not metric grid.
refinements for user grid (mainly in read/write config).
2009-Feb-06 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++pcbnew
added "cutout" from a ZONE_CONTAINER capability to the SPECCTRA export.
added "netless zone" support to SPECCTRA export.
2009-Feb-6 Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
Added a forgotten contributor (Tim Hanson) to kicad contributor list.
++pcbnew:
Zoom factors in 1.5 progression, and limited to 18 values
(near to to Wayne Stambaugh's changes: 15 values are not enought for pcbnew)
removed minor problems in zoom box selection (removed blank line).
Added user grid selection in modedit and refinements when user grid is selected.
++eeschema:
Zoom factors in 1.5 progression, and limited to 15 values according to Wayne Stambaugh's changes.
2009-Feb-05 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
++All
* Change CMakeList.txt so that all PCB object classes that do not need built
separately for pcbnew, gerbview, and cvpcb only get built once and added
to the common library.
* Override all classes derived from WinEDA_BasePcbFrame so that the source
code file basepcbframe.cpp only gets compiled once and added to the common
library.
* Prevent cursor movement keys from moving outside of client area by
automatically scrolling the drawing.
2009-Feb-4 UPDATE Vesa Solonen <vesa.solonen@hut.fi>
================================================================================
++pcbnew:
++eeschema:
Zoom factors in 3th root series of 2. So two intermediates between half/double scale.
2009-Feb-04 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
++All
* Refactor header files to reduce the number of files that need recompiled
when making changes to base classes.
* Move sine and cosine look up tables from trigo.h to trigo.cpp to avoid
multiple recompiles.
2009-feb-01 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++All:
change filename drawpanel_wxstruct.h to class_drawpanel.h
and move class BASE_SCREEN description from drawpanel_wxstruct.h to a new file: class_base_screen.h
minor enhancement for window zoom command.
refinements in 3D zones drawing.
2009-jan-31 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++All:
Print functions and display zoom level modified to use the new zoom implementation
Comments added in some functions.
Code cleaning
some bugs fixed.
Added contributors to list in about Kicad.
2009-Jan-29 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
++All
* Replace zoom implementation with a more flexible ( and hopefully useful )
design.
* Removed gr_basic.h from fctsys.h so that the entire project doesn't get
rebuilt unnecessarily.
2009-Jan-29 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++all
common.c added EnsureTextCtrlWidth()
++eeschema
* dialog edit component in schematic: make sure chipname text control is wide
enough to handle unusually long chip names.
* Retain and re-use user's desired dialog edit component window size.
Did not have time to look at dialog edit component in library.
2009-Jan-27 UPDATE Vesa Solonen <vesa.solonen@hut.fi>
================================================================================
++pcbnew:
Zone arc approximation starts with half increment offset from v/h for pads and vias
to get more fill space between rows.
2009-Jan-17 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++pcbnew:
Found why remove unused thermal stubs fails sometimes:
Only the first filled area in a zone was tested.
Solved.
2009-Jan-18 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
++All
* Replace Kicad file history implementation with wxFileHistory.
* Laid groundwork for search paths using wxPathList in EDA_Appl.
* Made ReCreateMenuBar actually recreate the menu bar. Now language updates
to menus can be changed without restarting program.
* Lots of general housekeeping, simplification, and code beautifying.
++EESchema
* Fix zoom and pan bug in library viewer panel due to incorrect DrawPanel
rectangle.
* Add zoom accelerator keys to library viewer (works in GTK, not Windows).
* Add Postscript header to new print dialog so Linux build works.
++PcbNew
* Add Postscript header to new print dialog so Linux build works.
2009-Jan-17 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++All:
Cleaned code in print dialogs.
They are now specific to eeschema and pcbnew.
Gerbview uses pcbnew dialog.
The code is now a lot more easy to understand.
2009-Jan-15 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++Pcbnew:
Added: patch from Rok Markovic (rok@kanardia.eu) to remove unused stubs in thermal pads
Modified: print boards when printing in color mode layers on one sheet:
now printed in OR mode like drawings on screen
Also in SVG mode, but OR mode seems not work very well in SVG mode (tested with inkscape).
2009-Jan-11 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++Pcbnew:
Added: print SVG format.
SVG print/plot function uses WRITE modeinsteed of OR mode as graphic mode.
todo ? uses OR graphic mode with black background color (wait and see)
++eeschema:
Code cleanup for Print SVG format, and used wxFormBuilder in SVG print dialog
2009-Jan-10 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++Pcbnew:
Calculations to create filled areas in a zone modified and uses 2 pass:
1 - filled areas are calculated with pads in zone.
2 - If thermal shapes are wanted, they are added (i.e. copper removed after ).
Seen comments in zones_convert_brd_items_to_polygons.cpp
The initial method was calculate filled areas in one pass.
With the 2 pass calculation, the calculation time is more expensive but:
- Kbool seems now works correctly in cases where the one pass way does not work
- Thermal reliefs can have a better shape (todo..) because when calculating them, the filled
areas are known (this was not the case in one pass way)
2009-Jan-08 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++Eeschema:
Print and plot functions now properly prints all sheets in a complex hierarchy
plot files created have now a new filename in order to be compatible with complex hierarchies
2009-Jan-07 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++Eeschema:
Print function now properly prints all sheets in a complex hierarchy
Note: plot functions are not updated and do not plot all sheets.
2009-Jan-07 UPDATE Wayne Stambaugh <stambaughw@verizon.net>
================================================================================
++all
* Don't pan or zoom on mouse wheel events when the cursor is not in the
drawing area.
* Reduce all zoom code to a single zoom command handler.
* Eliminate redundant zoom command identifiers.
* Move pop up zoom command handler from DrawPanel to DrawFrame.
* Change hot key zoom handlers to use command events.
* Added DrawFrame event table to replace COMMON_EVENTS_DRAWFRAME macro.
* Added locale path relative to binary path for development purposes.
* Minor code clean ups and duplicate header removal in files that were
updated.
2009-Jan-04 UPDATE Dick Hollenbeck <dick@softplc.com>
================================================================================
++all
wxPcbStruct.h: made m_Pcb private, added GetBoard(). Am considering
putting each gerber layer into its own BOARD.
2009-Jan-02 UPDATE Jean-Pierre Charras <jean-pierre.charras@inpg.fr>
================================================================================
++Eeschema:
Code cleaning.
LibDrawPolyline uses now std::vector<wxPoint> to handle corners.
DrawPolylineStruct uses now std::vector<wxPoint> to handle corners.
Reference in New Issue View Git Blame Copy Permalink