kicad/pcbnew/hotkeys.cpp

1144 lines
34 KiB
C++

/***************/
/* hotkeys.cpp */
/***************/
#include "fctsys.h"
#include "common.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "module_editor_frame.h"
#include "pcbnew_id.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "class_board_design_settings.h"
#include "hotkeys.h"
#include "protos.h"
/* How to add a new hotkey:
* add a new id in the enum hotkey_id_commnand like MY_NEW_ID_FUNCTION.
* add a new Ki_HotkeyInfo entry like:
* static Ki_HotkeyInfo HkMyNewEntry(wxT("Command Label"), MY_NEW_ID_FUNCTION, default key value);
* "Command Label" is the name used in hotkey list display, and the identifier in the hotkey list file
* MY_NEW_ID_FUNCTION is an equivalent id function used in the switch in OnHotKey() function.
* default key value is the default hotkey for this command. Can be overrided by the user hotkey list file
* add the HkMyNewEntry pointer in the s_board_edit_Hotkey_List list ( or/and the s_module_edit_Hotkey_List list)
* Add the new code in the switch in OnHotKey() function.
* Note: when the variable itemCurrentlyEdited is true, an item is currently edited.
* This can be useful if the new function cannot be executed while an item is currently being edited
* ( For example, one cannot start a new wire when a component is moving.)
*
* Note: If an hotkey is a special key, be sure the corresponding wxWidget keycode (WXK_XXXX)
* is handled in the hotkey_name_descr s_Hotkey_Name_List list (see hotkeys_basic.cpp)
* and see this list for some ascii keys (space ...)
*/
/* local variables */
/* Hotkey list: */
static Ki_HotkeyInfo HkSwitch2CopperLayer( wxT( "Switch to Copper layer" ),
HK_SWITCH_LAYER_TO_COPPER, WXK_PAGEDOWN );
static Ki_HotkeyInfo HkSwitch2ComponentLayer( wxT( "Switch to Component layer" ),
HK_SWITCH_LAYER_TO_COMPONENT, WXK_PAGEUP );
static Ki_HotkeyInfo HkSwitch2InnerLayer1( wxT( "Switch to Inner layer 1" ),
HK_SWITCH_LAYER_TO_INNER1, WXK_F5 );
static Ki_HotkeyInfo HkSwitch2InnerLayer2( wxT( "Switch to Inner layer 2" ),
HK_SWITCH_LAYER_TO_INNER2, WXK_F6 );
static Ki_HotkeyInfo HkSwitch2InnerLayer3( wxT( "Switch to Inner layer 3" ),
HK_SWITCH_LAYER_TO_INNER3, WXK_F7 );
static Ki_HotkeyInfo HkSwitch2InnerLayer4( wxT( "Switch to Inner layer 4" ),
HK_SWITCH_LAYER_TO_INNER4, WXK_F8 );
static Ki_HotkeyInfo HkSwitch2InnerLayer5( wxT( "Switch to Inner layer 5" ),
HK_SWITCH_LAYER_TO_INNER5, WXK_F9 );
static Ki_HotkeyInfo HkSwitch2InnerLayer6( wxT( "Switch to Inner layer 6" ),
HK_SWITCH_LAYER_TO_INNER6, WXK_F10 );
static Ki_HotkeyInfo HkSwitch2NextCopperLayer( wxT( "Switch to Next Layer" ),
HK_SWITCH_LAYER_TO_NEXT, '+' );
static Ki_HotkeyInfo HkSwitch2PreviousCopperLayer( wxT(
"Switch to Previous Layer" ),
HK_SWITCH_LAYER_TO_PREVIOUS, '-' );
static Ki_HotkeyInfo HkSavefile( wxT( "Save board" ), HK_SAVE_BOARD, 'S'
+ GR_KB_CTRL );
static Ki_HotkeyInfo HkLoadfile( wxT( "Load board" ), HK_LOAD_BOARD, 'L'
+ GR_KB_CTRL );
static Ki_HotkeyInfo HkFindItem( wxT( "Find Item" ), HK_FIND_ITEM, 'F'
+ GR_KB_CTRL );
static Ki_HotkeyInfo HkBackspace( wxT( "Delete track segment" ), HK_BACK_SPACE,
WXK_BACK );
static Ki_HotkeyInfo HkAddNewTrack( wxT( "Add new track" ), HK_ADD_NEW_TRACK, 'X' );
static Ki_HotkeyInfo HkAddVia( wxT( "Add Via" ), HK_ADD_VIA, 'V' );
static Ki_HotkeyInfo HkSwitchTrackPosture( wxT( "Switch Track Posture" ),
HK_SWITCH_TRACK_POSTURE, '/' );
static Ki_HotkeyInfo HkAddMicroVia( wxT( "Add MicroVia" ), HK_ADD_MICROVIA, 'V'
+ GR_KB_CTRL );
static Ki_HotkeyInfo HkEndTrack( wxT( "End Track" ), HK_END_TRACK, WXK_END );
static Ki_HotkeyInfo HkEditBoardItem( wxT( "Edit Item" ), HK_EDIT_ITEM, 'E' );
static Ki_HotkeyInfo HkFlipFootprint( wxT( "Flip Footprint" ), HK_FLIP_FOOTPRINT,
'F' );
static Ki_HotkeyInfo HkRotateItem( wxT( "Rotate Item" ), HK_ROTATE_ITEM, 'R' );
static Ki_HotkeyInfo HkMoveItem( wxT( "Move Item" ), HK_MOVE_ITEM, 'M' );
static Ki_HotkeyInfo HkDragFootprint( wxT( "Drag Footprint" ), HK_DRAG_ITEM,
'G' );
static Ki_HotkeyInfo HkGetAndMoveFootprint( wxT( "Get and Move Footprint" ),
HK_GET_AND_MOVE_FOOTPRINT, 'T' );
static Ki_HotkeyInfo HkLock_Unlock_Footprint( wxT( "Lock/Unlock Footprint" ),
HK_LOCK_UNLOCK_FOOTPRINT, 'L' );
static Ki_HotkeyInfo HkDelete( wxT( "Delete Track or Footprint" ), HK_DELETE, WXK_DELETE );
static Ki_HotkeyInfo HkResetLocalCoord( wxT( "Reset local coord." ),
HK_RESET_LOCAL_COORD, ' ' );
/* Fit on Screen */
#if !defined( __WXMAC__ )
static Ki_HotkeyInfo HkZoomAuto( wxT( "Zoom Auto" ), HK_ZOOM_AUTO, WXK_HOME );
#else
static Ki_HotkeyInfo HkZoomAuto( wxT( "Zoom Auto" ), HK_ZOOM_AUTO, GR_KB_CTRL + '0' );
#endif
static Ki_HotkeyInfo HkZoomCenter( wxT( "Zoom Center" ), HK_ZOOM_CENTER, WXK_F4 );
/* Refresh Screen */
#if !defined( __WXMAC__ )
static Ki_HotkeyInfo HkZoomRedraw( wxT( "Zoom Redraw" ), HK_ZOOM_REDRAW, WXK_F3 );
#else
static Ki_HotkeyInfo HkZoomRedraw( wxT( "Zoom Redraw" ), HK_ZOOM_REDRAW, GR_KB_CTRL + 'R' );
#endif
/* Zoom In */
#if !defined( __WXMAC__ )
static Ki_HotkeyInfo HkZoomIn( wxT( "Zoom In" ), HK_ZOOM_IN, WXK_F1 );
#else
static Ki_HotkeyInfo HkZoomIn( wxT( "Zoom In" ), HK_ZOOM_IN, GR_KB_CTRL + '+' );
#endif
/* Zoom Out */
#if !defined( __WXMAC__ )
static Ki_HotkeyInfo HkZoomOut( wxT( "Zoom Out" ), HK_ZOOM_OUT, WXK_F2 );
#else
static Ki_HotkeyInfo HkZoomOut( wxT( "Zoom Out" ), HK_ZOOM_OUT, GR_KB_CTRL + '-' );
#endif
static Ki_HotkeyInfo HkHelp( wxT( "Help: this message" ), HK_HELP, '?' );
/* Undo */
static Ki_HotkeyInfo HkUndo( wxT( "Undo" ), HK_UNDO, GR_KB_CTRL + 'Z',
(int) wxID_UNDO );
/* Redo */
#if !defined( __WXMAC__ )
static Ki_HotkeyInfo HkRedo( wxT( "Redo" ), HK_REDO, GR_KB_CTRL + 'Y',
(int) wxID_REDO );
#else
static Ki_HotkeyInfo HkRedo( wxT( "Redo" ), HK_REDO,
GR_KB_SHIFT + GR_KB_CTRL + 'Z',
(int) wxID_REDO );
#endif
static Ki_HotkeyInfo HkSwitchUnits( wxT( "Switch Units" ), HK_SWITCH_UNITS, 'U'
+ GR_KB_CTRL );
static Ki_HotkeyInfo HkTrackDisplayMode( wxT( "Track Display Mode" ),
HK_SWITCH_TRACK_DISPLAY_MODE, 'K' );
static Ki_HotkeyInfo HkAddModule( wxT( "Add Module" ), HK_ADD_MODULE, 'O' );
// List of common hotkey descriptors
Ki_HotkeyInfo* s_Common_Hotkey_List[] =
{
&HkHelp, &HkZoomIn, &HkZoomOut,
&HkZoomRedraw, &HkZoomCenter, &HkZoomAuto,
&HkSwitchUnits, &HkResetLocalCoord,
&HkUndo, &HkRedo,
NULL
};
// List of hotkey descriptors for pcbnew
Ki_HotkeyInfo* s_board_edit_Hotkey_List[] =
{
&HkTrackDisplayMode, &HkDelete,
&HkBackspace,
&HkAddNewTrack, &HkAddVia, &HkAddMicroVia,
&HkSwitchTrackPosture,
&HkEndTrack, &HkMoveItem,
&HkFlipFootprint, &HkRotateItem, &HkDragFootprint,
&HkGetAndMoveFootprint, &HkLock_Unlock_Footprint, &HkSavefile,
&HkLoadfile, &HkFindItem, &HkEditBoardItem,
&HkSwitch2CopperLayer, &HkSwitch2InnerLayer1,
&HkSwitch2InnerLayer2, &HkSwitch2InnerLayer3, &HkSwitch2InnerLayer4,
&HkSwitch2InnerLayer5, &HkSwitch2InnerLayer6, &HkSwitch2ComponentLayer,
&HkSwitch2NextCopperLayer, &HkSwitch2PreviousCopperLayer,&HkAddModule,
NULL
};
// List of hotkey descriptors for the module editor
Ki_HotkeyInfo* s_module_edit_Hotkey_List[] = {
&HkMoveItem, &HkRotateItem, &HkEditBoardItem,
&HkDelete,
NULL
};
// list of sections and corresponding hotkey list for pcbnew (used to create an hotkey config file)
struct Ki_HotkeyInfoSectionDescriptor s_Pcbnew_Editor_Hokeys_Descr[] =
{ {
&g_CommonSectionTag, s_Common_Hotkey_List, L"Common keys"
},
{
&g_BoardEditorSectionTag, s_board_edit_Hotkey_List, L"Board editor keys"
},{
&g_ModuleEditSectionTag, s_module_edit_Hotkey_List, L"Footprint editor keys"
},{
NULL, NULL, NULL
} };
// list of sections and corresponding hotkey list for the board editor (used to list current hotkeys)
struct Ki_HotkeyInfoSectionDescriptor s_Board_Editor_Hokeys_Descr[] =
{ {
&g_CommonSectionTag, s_Common_Hotkey_List,
NULL
},{
&g_BoardEditorSectionTag, s_board_edit_Hotkey_List, NULL
},{
NULL, NULL, NULL
} };
// list of sections and corresponding hotkey list for the footprint editor (used to list current hotkeys)
struct Ki_HotkeyInfoSectionDescriptor s_Module_Editor_Hokeys_Descr[] =
{ {
&g_CommonSectionTag, s_Common_Hotkey_List, NULL
},{
&g_ModuleEditSectionTag, s_module_edit_Hotkey_List, NULL
},{
NULL, NULL, NULL
} };
/** Function OnHotKey.
* ** Commands are case insensitive **
* Some commands are relatives to the item under the mouse cursor
* @param aDC = current device context
* @param hotkey = hotkey code (ascii or wxWidget code for special keys)
* @param aItem = NULL or pointer on a EDA_BaseStruct under the mouse cursor
*/
void WinEDA_PcbFrame::OnHotKey( wxDC* aDC, int aHotkeyCode, EDA_BaseStruct* aItem )
{
if( aHotkeyCode == 0 )
return;
bool itemCurrentlyEdited = (GetCurItem() && GetCurItem()->m_Flags);
MODULE* module = NULL;
int evt_type = 0; //Used to post a wxCommandEvent on demand
/* Convert lower to upper case
* (the usual toupper function has problem with non ascii codes like function keys
*/
if( (aHotkeyCode >= 'a') && (aHotkeyCode <= 'z') )
aHotkeyCode += 'A' - 'a';
Ki_HotkeyInfo* HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, s_Common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, s_board_edit_Hotkey_List );
if( HK_Descr == NULL )
return;
// Create a wxCommandEvent that will be posted in some hot keys functions
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
int ll;
switch( HK_Descr->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return;
break;
case HK_SWITCH_LAYER_TO_PREVIOUS:
ll = getActiveLayer();
if( (ll <= LAYER_N_BACK) || (ll > LAYER_N_FRONT) )
break;
if( GetBoard()->GetCopperLayerCount() < 2 ) // Single layer
ll = LAYER_N_BACK;
else if( ll == LAYER_N_FRONT )
ll = MAX( LAYER_N_BACK,
GetBoard()->GetCopperLayerCount() - 2 );
else
ll--;
SwitchLayer( aDC, ll );
break;
case HK_SWITCH_LAYER_TO_NEXT:
ll = getActiveLayer();
if( (ll < LAYER_N_BACK) || (ll >= LAYER_N_FRONT) )
break;
if( GetBoard()->GetCopperLayerCount() < 2 ) // Single layer
ll = LAYER_N_BACK;
else if( ll >= GetBoard()->GetCopperLayerCount() - 2 )
ll = LAYER_N_FRONT;
else
ll++;
SwitchLayer( aDC, ll );
break;
case HK_SWITCH_LAYER_TO_COMPONENT:
SwitchLayer( aDC, LAYER_N_FRONT );
break;
case HK_SWITCH_LAYER_TO_COPPER:
SwitchLayer( aDC, LAYER_N_BACK );
break;
case HK_SWITCH_LAYER_TO_INNER1:
SwitchLayer( aDC, LAYER_N_2 );
break;
case HK_SWITCH_LAYER_TO_INNER2:
SwitchLayer( aDC, LAYER_N_3 );
break;
case HK_SWITCH_LAYER_TO_INNER3:
SwitchLayer( aDC, LAYER_N_4 );
break;
case HK_SWITCH_LAYER_TO_INNER4:
SwitchLayer( aDC, LAYER_N_5 );
break;
case HK_SWITCH_LAYER_TO_INNER5:
SwitchLayer( aDC, LAYER_N_6 );
break;
case HK_SWITCH_LAYER_TO_INNER6:
SwitchLayer( aDC, LAYER_N_7 );
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, s_Board_Editor_Hokeys_Descr );
break;
case HK_ZOOM_IN:
evt_type = ID_POPUP_ZOOM_IN;
break;
case HK_ZOOM_OUT:
evt_type = ID_POPUP_ZOOM_OUT;
break;
case HK_ZOOM_REDRAW:
evt_type = ID_ZOOM_REDRAW;
break;
case HK_ZOOM_AUTO:
evt_type = ID_ZOOM_PAGE;
break;
case HK_ZOOM_CENTER:
evt_type = ID_POPUP_ZOOM_CENTER;
break;
case HK_ADD_MODULE:
evt_type = ID_COMPONENT_BUTT;
break;
case HK_UNDO:
case HK_REDO:
if( !itemCurrentlyEdited )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED,
HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_RESET_LOCAL_COORD: /*Reset the relative coord */
GetScreen()->m_O_Curseur = GetScreen()->m_Curseur;
break;
case HK_SWITCH_UNITS:
g_UserUnit = (g_UserUnit == INCHES) ? MILLIMETRES : INCHES;
break;
case HK_SWITCH_TRACK_DISPLAY_MODE:
DisplayOpt.DisplayPcbTrackFill ^= 1;
DisplayOpt.DisplayPcbTrackFill &= 1;
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
DrawPanel->Refresh();
break;
case HK_DELETE:
OnHotkeyDeleteItem( aDC );
break;
case HK_BACK_SPACE:
if( m_ID_current_state == ID_TRACK_BUTT && (getActiveLayer() <= LAYER_N_FRONT) )
{
if( !itemCurrentlyEdited )
{
// no track is currently being edited - select a segment and remove it.
// @todo: possibly? pass the HK command code to PcbGeneralLocateAndDisplay()
// so it can restrict its search to specific item types.
aItem = PcbGeneralLocateAndDisplay();
// don't let backspace delete modules!!
if( aItem && (aItem->Type() == TYPE_TRACK
|| aItem->Type() == TYPE_VIA) )
{
Delete_Segment( aDC, (TRACK*) aItem );
SetCurItem( NULL );
}
OnModify();
}
else if( GetCurItem()->Type() == TYPE_TRACK )
{
// then an element is being edited - remove the last segment.
// simple lines for debugger:
TRACK* track = (TRACK*) GetCurItem();
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
}
}
break;
case HK_END_TRACK:
if( itemCurrentlyEdited && (GetCurItem()->Type() == TYPE_TRACK)
&& ( (GetCurItem()->m_Flags & IS_NEW) != 0 ) )
{
// A new track is in progress: call to End_Route()
DrawPanel->MouseToCursorSchema();
End_Route( (TRACK*) GetCurItem(), aDC );
}
break;
case HK_GET_AND_MOVE_FOOTPRINT:
if( !itemCurrentlyEdited )
evt_type = ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST;
break;
case HK_FIND_ITEM:
if( !itemCurrentlyEdited )
evt_type = ID_FIND_ITEMS;
break;
case HK_LOAD_BOARD:
if( !itemCurrentlyEdited )
evt_type = ID_LOAD_FILE ;
break;
case HK_SAVE_BOARD:
if( !itemCurrentlyEdited )
evt_type = ID_SAVE_BOARD;
break;
case HK_ADD_MICROVIA: // Place a micro via if a track is in progress
if( m_ID_current_state != ID_TRACK_BUTT )
return;
if( !itemCurrentlyEdited ) // no track in progress: nothing to do
break;
if( GetCurItem()->Type() != TYPE_TRACK ) // Should not occur
return;
if( (GetCurItem()->m_Flags & IS_NEW) == 0 )
return;
// place micro via and switch layer
if( IsMicroViaAcceptable() )
evt_type = ID_POPUP_PCB_PLACE_MICROVIA;
break;
case HK_ADD_VIA: // Switch to alternate layer and Place a via if a track is in progress
if( m_ID_current_state != ID_TRACK_BUTT )
return;
if( !itemCurrentlyEdited ) // no track in progress: switch layer only
{
Other_Layer_Route( NULL, aDC );
break;
}
if( GetCurItem()->Type() != TYPE_TRACK )
return;
if( (GetCurItem()->m_Flags & IS_NEW) == 0 )
return;
evt_type = ID_POPUP_PCB_PLACE_VIA;
break;
case HK_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
*/
evt_type = ID_POPUP_PCB_SWITCH_TRACK_POSTURE ;
break;
case HK_ADD_NEW_TRACK: // Start new track
if( getActiveLayer() > LAYER_N_FRONT )
break;
if( m_ID_current_state != ID_TRACK_BUTT && !itemCurrentlyEdited )
{
cmd.SetId( ID_TRACK_BUTT );
GetEventHandler()->ProcessEvent( cmd );
}
if( m_ID_current_state != ID_TRACK_BUTT )
break;
if( !itemCurrentlyEdited ) // no track in progress:
{
TRACK* track = Begin_Route( NULL, aDC );
SetCurItem( track );
if( track )
DrawPanel->m_AutoPAN_Request = true;
}
else if( GetCurItem()->m_Flags & IS_NEW )
{
TRACK* track = Begin_Route( (TRACK*) GetCurItem(), aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( track, false );
DrawPanel->m_AutoPAN_Request = true;
}
break;
case HK_EDIT_ITEM: // Edit board item
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
// Footprint edition:
case HK_LOCK_UNLOCK_FOOTPRINT: // toggle module "MODULE_is_LOCKED" status:
// get any module, locked or not locked and toggle its locked status
if( !itemCurrentlyEdited )
module = Locate_Prefered_Module( GetBoard(), CURSEUR_OFF_GRILLE
| VISIBLE_ONLY );
else if( GetCurItem()->Type() == TYPE_MODULE )
module = (MODULE*) GetCurItem();
if( module )
{
SetCurItem( module );
module->SetLocked( !module->IsLocked() );
module->DisplayInfo( this );
}
break;
case HK_DRAG_ITEM: // Start drag module or track segment
OnHotkeyMoveItem( HK_DRAG_ITEM );
break;
case HK_MOVE_ITEM: // Start move item
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_ROTATE_ITEM: // Rotation
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
case HK_FLIP_FOOTPRINT: // move to other side
OnHotkeyRotateItem( HK_FLIP_FOOTPRINT );
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
}
}
/***********************************************************/
void WinEDA_ModuleEditFrame::OnHotKey( wxDC* aDC, int hotkey,
EDA_BaseStruct* DrawStruct )
/***********************************************************/
/* Hot keys. Some commands are relative to the item under the mouse cursor
* Commands are case insensitive
*/
{
if( hotkey == 0 )
return;
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == 0) || (item->m_Flags == 0);
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem with non ascii codes like function keys */
if( (hotkey >= 'a') && (hotkey <= 'z') )
hotkey += 'A' - 'a';
Ki_HotkeyInfo* HK_Descr = GetDescriptorFromHotkey( hotkey, s_Common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( hotkey, s_module_edit_Hotkey_List );
if( HK_Descr == NULL )
return;
switch( HK_Descr->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return;
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, s_Module_Editor_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: /*Reset the relative coord */
GetScreen()->m_O_Curseur = GetScreen()->m_Curseur;
break;
case HK_SWITCH_UNITS:
g_UserUnit = (g_UserUnit == INCHES) ? MILLIMETRES : INCHES;
break;
case HK_ZOOM_IN:
cmd.SetId( ID_POPUP_ZOOM_IN );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_OUT:
cmd.SetId( ID_POPUP_ZOOM_OUT );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_REDRAW:
cmd.SetId( ID_ZOOM_REDRAW );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_CENTER:
cmd.SetId( ID_POPUP_ZOOM_CENTER );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_UNDO:
case HK_REDO:
if( ItemFree )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED,
HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_ZOOM_AUTO:
cmd.SetId( ID_ZOOM_PAGE );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_EDIT_ITEM:
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_DELETE:
OnHotkeyDeleteItem( HK_DELETE );
break;
case HK_MOVE_ITEM:
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_ROTATE_ITEM:
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
}
}
bool WinEDA_ModuleEditFrame::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
if( itemCurrentlyEdited )
return false;
item = ModeditLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case TYPE_MODULE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE;
break;
case TYPE_PAD:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PAD;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
bool WinEDA_ModuleEditFrame::OnHotkeyDeleteItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
if( itemCurrentlyEdited )
return false;
item = ModeditLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case TYPE_PAD:
if( aIdCommand == HK_DELETE )
evt_type = ID_POPUP_PCB_DELETE_PAD;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_DELETE )
evt_type = ID_POPUP_PCB_DELETE_TEXTMODULE;
break;
case TYPE_EDGE_MODULE:
if( aIdCommand == HK_DELETE )
evt_type = ID_POPUP_PCB_DELETE_EDGE;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
bool WinEDA_ModuleEditFrame::OnHotkeyMoveItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
if( itemCurrentlyEdited )
return false;
item = ModeditLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case TYPE_PAD:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_PAD_REQUEST;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST;
break;
case TYPE_EDGE_MODULE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_EDGE;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
bool WinEDA_ModuleEditFrame::OnHotkeyRotateItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
int evt_type = 0; // Used to post a wxCommandEvent on demand
if( !itemCurrentlyEdited )
item = ModeditLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
switch( item->Type() )
{
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_ROTATE_ITEM ) // Rotation
evt_type = ID_POPUP_PCB_ROTATE_TEXTMODULE;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
/** Function OnHotkeyDeleteItem
* Delete the item found under the mouse cursor
* Depending on the current active tool::
* Tool track
* if a track is in progress: Delete the last segment
* else delete the entire track
* Tool module (footprint):
* Delete the module.
* @param aDC = current device context
* @return true if an item was deleted
*/
bool WinEDA_PcbFrame::OnHotkeyDeleteItem( wxDC* aDC )
{
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == NULL) || (item->m_Flags == 0);
switch( m_ID_current_state )
{
case ID_TRACK_BUTT:
if( getActiveLayer() > LAYER_N_FRONT )
return false;
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
if( item && item->Type() != TYPE_TRACK )
return false;
Delete_Track( aDC, (TRACK*) item );
}
else if( item->Type() == TYPE_TRACK )
{
// simple lines for debugger:
TRACK* track = (TRACK*) item;
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
return true;
}
break;
case ID_COMPONENT_BUTT:
if( ItemFree )
{
MODULE* module = Locate_Prefered_Module( GetBoard(),
CURSEUR_ON_GRILLE );
if( module == NULL )
return false;
if( !IsOK( this, _( "Delete module?" ) ) )
return false;
RemoveStruct( module, aDC );
}
else
return false;
break;
default:
return false;
}
OnModify();
SetCurItem( NULL );
return true;
}
bool WinEDA_PcbFrame::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case TYPE_TRACK:
case TYPE_VIA:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TRACKSEG;
break;
case TYPE_TEXTE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTEPCB;
break;
case TYPE_MODULE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE;
break;
case TYPE_PAD:
// Post a EDIT_MODULE event here to prevent pads
// from being edited by hotkeys.
// Process_Special_Functions takes care of finding
// the parent.
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE;
break;
case TYPE_MIRE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MIRE;
break;
case TYPE_DIMENSION:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DIMENSION;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
case TYPE_DRAWSEGMENT:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DRAWING;
break;
case TYPE_ZONE_CONTAINER:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_ZONE_PARAMS;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
/** Function OnHotkeyMoveItem
* Move or drag the item (footprint, track, text .. ) found under the mouse cursor
* An item can be moved (or dragged) only if there is no item currently edited
* Only a footprint, a pad or a track can be dragged
* @param aIdCommand = the hotkey command id
* @return true if an item was moved
*/
bool WinEDA_PcbFrame::OnHotkeyMoveItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case TYPE_TRACK:
case TYPE_VIA:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TRACK_NODE;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT;
break;
case TYPE_MODULE:
{
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
}
break;
case TYPE_PAD:
// Post MODULE_REQUEST events here to prevent pads
// from being moved or dragged by hotkeys.
// Process_Special_Functions takes care of finding
// the parent.
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
break;
case TYPE_TEXTE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST;
break;
case TYPE_MIRE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MIRE_REQUEST;
break;
case TYPE_ZONE_CONTAINER:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_ZONE_OUTLINES;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST;
break;
case TYPE_DRAWSEGMENT:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_DRAWING_REQUEST;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
/** Function OnHotkeyRotateItem
* Rotate the item (text or footprint) found under the mouse cursor
* Note:
* this command can be used with an item currently in edit
* Only some items can be rotated (footprints and texts)
* @param aIdCommand = the hotkey command id
* @return true if an item was moved
*/
bool WinEDA_PcbFrame::OnHotkeyRotateItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->m_Flags;
int evt_type = 0; // Used to post a wxCommandEvent on demand
if( !itemCurrentlyEdited )
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
switch( item->Type() )
{
case TYPE_MODULE:
{
if( aIdCommand == HK_ROTATE_ITEM ) // Rotation
evt_type = ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE;
if( aIdCommand == HK_FLIP_FOOTPRINT ) // move to other side
evt_type = ID_POPUP_PCB_CHANGE_SIDE_MODULE;
}
break;
case TYPE_TEXTE:
if( aIdCommand == HK_ROTATE_ITEM ) // Rotation
evt_type = ID_POPUP_PCB_ROTATE_TEXTEPCB;
break;
case TYPE_TEXTE_MODULE:
if( aIdCommand == HK_ROTATE_ITEM ) // Rotation
evt_type = ID_POPUP_PCB_ROTATE_TEXTMODULE;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}