kicad/libs.linux

172 lines
5.0 KiB
Plaintext
Raw Blame History

#
# Configuration for kicad build & install
#
# Locations for install targets. All can be overriden on the make command.
# Normally you'd only expect to override the PREFIX if you want to install to
# a non standard install dir (or a temp location for packaging).
# For packaging you can override and install anywhere, but to run from a
# non-standard location edit common/gestfich.ccp so it knows where to
# load help/data/etc. files from.
# Current supported PREFIXes are /usr, /usr/local & /usr/local/kicad
STD_INSTALL = 1
ifeq ($(STD_INSTALL), 1)
PREFIX = /usr
KICAD_BIN = $(PREFIX)/bin
KICAD_PLUGINS = $(PREFIX)/lib/kicad/plugins
KICAD_DOCS=$(PREFIX)/share/doc/kicad
KICAD_DATA=$(PREFIX)/share/kicad
KICAD_MODULES=$(KICAD_DATA)/modules
KICAD_LIBRARY=$(KICAD_DATA)/library
KICAD_INTERNAT=$(KICAD_DATA)/internat
KICAD_TEMPLATE=$(KICAD_DATA)/template
else
# used by myself (JP Charras) to build a statically linked distribution intalled in /usr/local (with STD_INSTALL = 0)
PREFIX = /usr/local/linux
KICAD_BIN = $(PREFIX)/bin
KICAD_PLUGINS = $(PREFIX)/linux/plugins
KICAD_DOCS=$(PREFIX)/help
KICAD_DATA=$(PREFIX)
KICAD_MODULES=$(KICAD_DATA)/modules
KICAD_LIBRARY=$(KICAD_DATA)/library
KICAD_INTERNAT=$(KICAD_DATA)/internat
KICAD_TEMPLATE=$(KICAD_DATA)/template
endif
# http://www.gnu.org/software/autoconf/manual/make/Catalogue-of-Rules.html#Catalogue-of-Rules
CXX = g++
SRCSUFF = .cpp
OBJSUFF = .o
FINAL = 1
# turn on/OFF debugging for all executables, only tested without KICAD_PYTHON
DEBUG = 0
# common CPPFLAGS to all components, further CPPFLAGS customization in
# directory specific makefile.gtk files.
ifeq ($(DEBUG), 1)
WXXFLAGS := $(shell wx-config --debug --cxxflags)
CPPFLAGS = -Wall -g3 -ggdb3 ${WXXFLAGS} -fno-strict-aliasing -DDEBUG
LDFLAGS = -g3 -ggdb3 #-v
else
WXXFLAGS := $(shell wx-config --cxxflags)
CPPFLAGS = -Wall -O2 ${WXXFLAGS} -fno-strict-aliasing
LDFLAGS = -s #-v
endif
# a command line define which affects pcbnew only, causing it to match current layer
ifdef USE_MATCH_LAYER
CPPFLAGS += -DUSE_MATCH_LAYER
endif
# You must comment or uncomment this line to disable/enable python support
#KICAD_PYTHON = 1
# You must uncomment these lines for static link (or build with "make -f makefile.gtk KICAD_STATIC_LINK=1")
# dynamic link is less difficult than static link and is what you would normally want
# to use if kicad is running only on your system or one with same level of libraries.
ifndef KICAD_PYTHON
ifeq ($(STD_INSTALL), 0)
KICAD_STATIC_LINK = 1
endif
endif
ifeq ($(KICAD_STATIC_LINK), 1)
LD = gcc
else
LD = g++
endif
ifdef KICAD_PYTHON
PYTHON_VERSION=2.5
PYLIBS= -L/usr/lib
PYLIBS+= -L /usr/include/python
PYLIBS+= -lpython$(PYTHON_VERSION)
PYLIBS+= -lboost_python-mt
EXTRACPPFLAGS+=-I /usr/include/python$(PYTHON_VERSION) -DKICAD_PYTHON -fno-strict-aliasing
endif
# path and version definition for wxWidgets and mesa libs
MESALIBSPATH = /usr/local/lib
WXPATH = `wx-config --prefix`/lib
PREFIX_WX_LIBS = lib`wx-config --basename`
SUFFIX_WX_LIBSTD = `wx-config --utility=`
SUFFIX_WX_LIBGL = _gl-$(LIBVERSION).a
# Use static link for libstdc++.a (sometimes also libsupc++.a)
# locate libstdc++.a and copy it in kicad_dev/syslibs
ifeq ($(KICAD_STATIC_LINK), 1)
#define path for a copy of libstdc++.a or/and libsupc++.a:
LIBSTDC = ../syslibs/libstdc++.a
else
# Or Use static link for libsupc++ or libstdc++ (more easy!!)
LIBSTDC = #-lstdc++ is implied when using g++ to link
endif
LIBVERSION=`wx-config --release`
LIBREGEX=$(WXPATH)/libwxregexu-$(LIBVERSION).a
# use link static for wxWidgets
ifeq ($(KICAD_STATIC_LINK), 1)
LIBS3D = $(WXPATH)/$(PREFIX_WX_LIBS)$(SUFFIX_WX_LIBGL)\
$(MESALIBSPATH)/libGL.a $(MESALIBSPATH)/libGLU.a
WXSYSLIB= $(WXPATH)/$(PREFIX_WX_LIBS)-$(LIBVERSION).a \
$(WXPATH)/libwxpng-$(LIBVERSION).a\
$(WXPATH)/libwxjpeg-$(LIBVERSION).a\
$(WXPATH)/libwxzlib-$(LIBVERSION).a\
$(LIBREGEX)\
/usr/X11R6/lib/libXinerama.a \
-lgtk-x11-2.0 -lgdk-x11-2.0 \
-latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lgthread-2.0\
-lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl\
-lglib-2.0 -lpangoft2-1.0 -lSM\
-L/usr/lib $(PYLIBS)
WXSYSLIB_WITH_GL= $(WXPATH)/$(PREFIX_WX_LIBS)-$(LIBVERSION).a \
$(WXPATH)/libwxpng-$(LIBVERSION).a\
$(WXPATH)/libwxjpeg-$(LIBVERSION).a\
$(WXPATH)/libwxzlib-$(LIBVERSION).a\
$(LIBS3D)\
/usr/X11R6/lib/libXinerama.a \
/usr/X11R6/lib/libXxf86vm.a \
-lgtk-x11-2.0 -lgdk-x11-2.0 \
-latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lgthread-2.0\
-lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl\
-lglib-2.0 -lpangoft2-1.0 -lSM\
-L/usr/lib $(PYLIBS)
else
ifeq ($(DEBUG), 1)
# debug wxWidgets
WXSYSLIB= `wx-config --debug --libs std`
WXSYSLIB_WITH_GL= `wx-config --debug --libs std,gl`
else
# or use "standard command" for wxWidgets
WXSYSLIB= `wx-config --libs std`
WXSYSLIB_WITH_GL= `wx-config --libs std,gl`
endif
endif
# attention <20> l'ordre des libairies
LIBS = -L/usr/local/lib -L/usr/X11R6/lib\
$(EXTRALIBS) $(WXSYSLIB)\
$(LIBSTDC) $(PYLIBS)
LIBS_WITH_GL = -L/usr/local/lib -L/usr/X11R6/lib\
$(EXTRALIBS) $(WXSYSLIB_WITH_GL)\
$(LIBSTDC) $(PYLIBS)