kicad/pcbnew/tools/point_editor.cpp

891 lines
28 KiB
C++

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2013 CERN
* @author Maciej Suminski <maciej.suminski@cern.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <functional>
using namespace std::placeholders;
#include <tool/tool_manager.h>
#include <view/view_controls.h>
#include <gal/graphics_abstraction_layer.h>
#include <geometry/seg.h>
#include <confirm.h>
#include "common_actions.h"
#include "selection_tool.h"
#include "point_editor.h"
#include <wxPcbStruct.h>
#include <class_edge_mod.h>
#include <class_dimension.h>
#include <class_zone.h>
#include <class_board.h>
#include <class_module.h>
// Few constants to avoid using bare numbers for point indices
enum SEG_POINTS
{
SEG_START, SEG_END
};
enum ARC_POINTS
{
ARC_CENTER, ARC_START, ARC_END
};
enum CIRCLE_POINTS
{
CIRC_CENTER, CIRC_END
};
enum DIMENSION_POINTS
{
DIM_CROSSBARO,
DIM_CROSSBARF,
DIM_FEATUREGO,
DIM_FEATUREDO,
};
class EDIT_POINTS_FACTORY
{
public:
static std::shared_ptr<EDIT_POINTS> Make( EDA_ITEM* aItem, KIGFX::GAL* aGal )
{
std::shared_ptr<EDIT_POINTS> points = std::make_shared<EDIT_POINTS>( aItem );
// Generate list of edit points basing on the item type
switch( aItem->Type() )
{
case PCB_LINE_T:
case PCB_MODULE_EDGE_T:
{
const DRAWSEGMENT* segment = static_cast<const DRAWSEGMENT*>( aItem );
switch( segment->GetShape() )
{
case S_SEGMENT:
points->AddPoint( segment->GetStart() );
points->AddPoint( segment->GetEnd() );
break;
case S_ARC:
points->AddPoint( segment->GetCenter() );
points->AddPoint( segment->GetArcStart() );
points->AddPoint( segment->GetArcEnd() );
// Set constraints
// Arc end has to stay at the same radius as the start
points->Point( ARC_END ).SetConstraint( new EC_CIRCLE( points->Point( ARC_END ),
points->Point( ARC_CENTER ),
points->Point( ARC_START ) ) );
break;
case S_CIRCLE:
points->AddPoint( segment->GetCenter() );
points->AddPoint( segment->GetEnd() );
break;
default: // suppress warnings
break;
}
break;
}
case PCB_ZONE_AREA_T:
{
const CPolyLine* outline = static_cast<const ZONE_CONTAINER*>( aItem )->Outline();
int cornersCount = outline->GetCornersCount();
for( int i = 0; i < cornersCount; ++i )
{
points->AddPoint( outline->GetPos( i ) );
if( outline->IsEndContour( i ) )
points->AddBreak();
}
// Lines have to be added after creating edit points,
// as they use EDIT_POINT references
for( int i = 0; i < cornersCount - 1; ++i )
{
if( points->IsContourEnd( i ) )
{
points->AddLine( points->Point( i ),
points->Point( points->GetContourStartIdx( i ) ) );
}
else
{
points->AddLine( points->Point( i ), points->Point( i + 1 ) );
}
points->Line( i ).SetConstraint( new EC_SNAPLINE( points->Line( i ),
std::bind( &KIGFX::GAL::GetGridPoint, aGal, _1 ) ) );
}
// The last missing line, connecting the last and the first polygon point
points->AddLine( points->Point( cornersCount - 1 ),
points->Point( points->GetContourStartIdx( cornersCount - 1 ) ) );
points->Line( points->LinesSize() - 1 ).SetConstraint(
new EC_SNAPLINE( points->Line( points->LinesSize() - 1 ),
std::bind( &KIGFX::GAL::GetGridPoint, aGal, _1 ) ) );
break;
}
case PCB_DIMENSION_T:
{
const DIMENSION* dimension = static_cast<const DIMENSION*>( aItem );
points->AddPoint( dimension->m_crossBarO );
points->AddPoint( dimension->m_crossBarF );
points->AddPoint( dimension->m_featureLineGO );
points->AddPoint( dimension->m_featureLineDO );
// Dimension height setting - edit points should move only along the feature lines
points->Point( DIM_CROSSBARO ).SetConstraint( new EC_LINE( points->Point( DIM_CROSSBARO ),
points->Point( DIM_FEATUREGO ) ) );
points->Point( DIM_CROSSBARF ).SetConstraint( new EC_LINE( points->Point( DIM_CROSSBARF ),
points->Point( DIM_FEATUREDO ) ) );
break;
}
default:
points.reset();
break;
}
return points;
}
private:
EDIT_POINTS_FACTORY() {};
};
POINT_EDITOR::POINT_EDITOR() :
TOOL_INTERACTIVE( "pcbnew.PointEditor" ), m_selectionTool( NULL ), m_editedPoint( NULL ),
m_original( VECTOR2I( 0, 0 ) ), m_altConstrainer( VECTOR2I( 0, 0 ) )
{
}
void POINT_EDITOR::Reset( RESET_REASON aReason )
{
m_editPoints.reset();
m_altConstraint.reset();
}
bool POINT_EDITOR::Init()
{
// Find the selection tool, so they can cooperate
m_selectionTool = static_cast<SELECTION_TOOL*>( m_toolMgr->FindTool( "pcbnew.InteractiveSelection" ) );
if( !m_selectionTool )
{
DisplayError( NULL, wxT( "pcbnew.InteractiveSelection tool is not available" ) );
return false;
}
m_selectionTool->GetMenu().AddItem( COMMON_ACTIONS::pointEditorAddCorner,
POINT_EDITOR::addCornerCondition );
m_selectionTool->GetMenu().AddItem( COMMON_ACTIONS::pointEditorRemoveCorner,
std::bind( &POINT_EDITOR::removeCornerCondition, this, _1 ) );
return true;
}
void POINT_EDITOR::updateEditedPoint( const TOOL_EVENT& aEvent )
{
EDIT_POINT* point = m_editedPoint;
if( aEvent.IsMotion() )
{
point = m_editPoints->FindPoint( aEvent.Position() );
}
else if( aEvent.IsDrag( BUT_LEFT ) )
{
point = m_editPoints->FindPoint( aEvent.DragOrigin() );
}
if( m_editedPoint != point )
setEditedPoint( point );
}
int POINT_EDITOR::OnSelectionChange( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
if( selection.Size() == 1 )
{
Activate();
KIGFX::VIEW_CONTROLS* controls = getViewControls();
KIGFX::VIEW* view = getView();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
EDA_ITEM* item = selection.items.GetPickedItem( 0 );
m_editPoints = EDIT_POINTS_FACTORY::Make( item, getView()->GetGAL() );
if( !m_editPoints )
return 0;
view->Add( m_editPoints.get() );
m_editedPoint = NULL;
bool modified = false;
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
if( !m_editPoints ||
evt->Matches( m_selectionTool->ClearedEvent ) ||
evt->Matches( m_selectionTool->UnselectedEvent ) ||
evt->Matches( m_selectionTool->SelectedEvent ) )
{
break;
}
if ( !modified )
updateEditedPoint( *evt );
if( evt->IsAction( &COMMON_ACTIONS::pointEditorAddCorner ) )
{
addCorner( controls->GetCursorPosition() );
updatePoints();
}
else if( evt->IsAction( &COMMON_ACTIONS::pointEditorRemoveCorner ) )
{
if( m_editedPoint )
{
removeCorner( m_editedPoint );
updatePoints();
}
}
else if( evt->IsDrag( BUT_LEFT ) && m_editedPoint )
{
if( !modified )
{
// Save items, so changes can be undone
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED );
controls->ForceCursorPosition( false );
m_original = *m_editedPoint; // Save the original position
controls->SetAutoPan( true );
modified = true;
}
bool enableAltConstraint = !!evt->Modifier( MD_CTRL );
if( enableAltConstraint != (bool) m_altConstraint ) // alternative constraint
setAltConstraint( enableAltConstraint );
m_editedPoint->SetPosition( controls->GetCursorPosition() );
if( m_altConstraint )
m_altConstraint->Apply();
else
m_editedPoint->ApplyConstraint();
updateItem();
updatePoints();
m_editPoints->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
else if( evt->IsAction( &COMMON_ACTIONS::pointEditorUpdate ) )
{
updatePoints();
}
else if( evt->IsMouseUp( BUT_LEFT ) )
{
controls->SetAutoPan( false );
setAltConstraint( false );
modified = false;
m_toolMgr->PassEvent();
}
else if( evt->IsCancel() )
{
if( modified ) // Restore the last change
{
wxCommandEvent dummy;
editFrame->RestoreCopyFromUndoList( dummy );
updatePoints();
modified = false;
}
// Let the selection tool receive the event too
m_toolMgr->PassEvent();
break;
}
else
{
m_toolMgr->PassEvent();
}
}
if( m_editPoints )
{
finishItem();
item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
view->Remove( m_editPoints.get() );
m_editPoints.reset();
}
controls->ShowCursor( false );
controls->SetAutoPan( false );
controls->SetSnapping( false );
}
return 0;
}
void POINT_EDITOR::updateItem() const
{
EDA_ITEM* item = m_editPoints->GetParent();
switch( item->Type() )
{
case PCB_LINE_T:
case PCB_MODULE_EDGE_T:
{
DRAWSEGMENT* segment = static_cast<DRAWSEGMENT*>( item );
switch( segment->GetShape() )
{
case S_SEGMENT:
if( isModified( m_editPoints->Point( SEG_START ) ) )
segment->SetStart( wxPoint( m_editPoints->Point( SEG_START ).GetPosition().x,
m_editPoints->Point( SEG_START ).GetPosition().y ) );
else if( isModified( m_editPoints->Point( SEG_END ) ) )
segment->SetEnd( wxPoint( m_editPoints->Point( SEG_END ).GetPosition().x,
m_editPoints->Point( SEG_END ).GetPosition().y ) );
break;
case S_ARC:
{
const VECTOR2I& center = m_editPoints->Point( ARC_CENTER ).GetPosition();
const VECTOR2I& start = m_editPoints->Point( ARC_START ).GetPosition();
const VECTOR2I& end = m_editPoints->Point( ARC_END ).GetPosition();
if( center != segment->GetCenter() )
{
wxPoint moveVector = wxPoint( center.x, center.y ) - segment->GetCenter();
segment->Move( moveVector );
m_editPoints->Point( ARC_START ).SetPosition( segment->GetArcStart() );
m_editPoints->Point( ARC_END ).SetPosition( segment->GetArcEnd() );
}
else
{
segment->SetArcStart( wxPoint( start.x, start.y ) );
VECTOR2D startLine = start - center;
VECTOR2I endLine = end - center;
double newAngle = RAD2DECIDEG( endLine.Angle() - startLine.Angle() );
// Adjust the new angle to (counter)clockwise setting
bool clockwise = ( segment->GetAngle() > 0 );
if( clockwise && newAngle < 0.0 )
newAngle += 3600.0;
else if( !clockwise && newAngle > 0.0 )
newAngle -= 3600.0;
segment->SetAngle( newAngle );
}
break;
}
case S_CIRCLE:
{
const VECTOR2I& center = m_editPoints->Point( CIRC_CENTER ).GetPosition();
const VECTOR2I& end = m_editPoints->Point( CIRC_END ).GetPosition();
if( isModified( m_editPoints->Point( CIRC_CENTER ) ) )
{
wxPoint moveVector = wxPoint( center.x, center.y ) - segment->GetCenter();
segment->Move( moveVector );
}
else
{
segment->SetEnd( wxPoint( end.x, end.y ) );
}
break;
}
default: // suppress warnings
break;
}
// Update relative coordinates for module edges
if( EDGE_MODULE* edge = dyn_cast<EDGE_MODULE*>( item ) )
edge->SetLocalCoord();
break;
}
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
zone->ClearFilledPolysList();
CPolyLine* outline = zone->Outline();
for( int i = 0; i < outline->GetCornersCount(); ++i )
{
VECTOR2I point = m_editPoints->Point( i ).GetPosition();
outline->SetX( i, point.x );
outline->SetY( i, point.y );
}
break;
}
case PCB_DIMENSION_T:
{
DIMENSION* dimension = static_cast<DIMENSION*>( item );
// Check which point is currently modified and updated dimension's points respectively
if( isModified( m_editPoints->Point( DIM_CROSSBARO ) ) )
{
VECTOR2D featureLine( m_editedPoint->GetPosition() - dimension->GetOrigin() );
VECTOR2D crossBar( dimension->GetEnd() - dimension->GetOrigin() );
if( featureLine.Cross( crossBar ) > 0 )
dimension->SetHeight( -featureLine.EuclideanNorm() );
else
dimension->SetHeight( featureLine.EuclideanNorm() );
}
else if( isModified( m_editPoints->Point( DIM_CROSSBARF ) ) )
{
VECTOR2D featureLine( m_editedPoint->GetPosition() - dimension->GetEnd() );
VECTOR2D crossBar( dimension->GetEnd() - dimension->GetOrigin() );
if( featureLine.Cross( crossBar ) > 0 )
dimension->SetHeight( -featureLine.EuclideanNorm() );
else
dimension->SetHeight( featureLine.EuclideanNorm() );
}
else if( isModified( m_editPoints->Point( DIM_FEATUREGO ) ) )
{
dimension->SetOrigin( wxPoint( m_editedPoint->GetPosition().x, m_editedPoint->GetPosition().y ) );
m_editPoints->Point( DIM_CROSSBARO ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARO ),
m_editPoints->Point( DIM_FEATUREGO ) ) );
m_editPoints->Point( DIM_CROSSBARF ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARF ),
m_editPoints->Point( DIM_FEATUREDO ) ) );
}
else if( isModified( m_editPoints->Point( DIM_FEATUREDO ) ) )
{
dimension->SetEnd( wxPoint( m_editedPoint->GetPosition().x, m_editedPoint->GetPosition().y ) );
m_editPoints->Point( DIM_CROSSBARO ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARO ),
m_editPoints->Point( DIM_FEATUREGO ) ) );
m_editPoints->Point( DIM_CROSSBARF ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARF ),
m_editPoints->Point( DIM_FEATUREDO ) ) );
}
break;
}
default:
break;
}
}
void POINT_EDITOR::finishItem() const
{
EDA_ITEM* item = m_editPoints->GetParent();
if( item->Type() == PCB_ZONE_AREA_T )
{
ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
if( zone->IsFilled() )
getEditFrame<PCB_EDIT_FRAME>()->Fill_Zone( zone );
}
}
void POINT_EDITOR::updatePoints()
{
EDA_ITEM* item = m_editPoints->GetParent();
switch( item->Type() )
{
case PCB_LINE_T:
case PCB_MODULE_EDGE_T:
{
const DRAWSEGMENT* segment = static_cast<const DRAWSEGMENT*>( item );
{
switch( segment->GetShape() )
{
case S_SEGMENT:
m_editPoints->Point( SEG_START ).SetPosition( segment->GetStart() );
m_editPoints->Point( SEG_END ).SetPosition( segment->GetEnd() );
break;
case S_ARC:
m_editPoints->Point( ARC_CENTER ).SetPosition( segment->GetCenter() );
m_editPoints->Point( ARC_START).SetPosition( segment->GetArcStart() );
m_editPoints->Point( ARC_END ).SetPosition( segment->GetArcEnd() );
break;
case S_CIRCLE:
m_editPoints->Point( CIRC_CENTER ).SetPosition( segment->GetCenter() );
m_editPoints->Point( CIRC_END ).SetPosition( segment->GetEnd() );
break;
default: // suppress warnings
break;
}
break;
}
}
case PCB_ZONE_AREA_T:
{
const ZONE_CONTAINER* zone = static_cast<const ZONE_CONTAINER*>( item );
const CPolyLine* outline = zone->Outline();
if( m_editPoints->PointsSize() != (unsigned) outline->GetCornersCount() )
{
getView()->Remove( m_editPoints.get() );
m_editPoints = EDIT_POINTS_FACTORY::Make( item, getView()->GetGAL() );
getView()->Add( m_editPoints.get() );
}
else
{
for( int i = 0; i < outline->GetCornersCount(); ++i )
m_editPoints->Point( i ).SetPosition( outline->GetPos( i ) );
}
break;
}
case PCB_DIMENSION_T:
{
const DIMENSION* dimension = static_cast<const DIMENSION*>( item );
m_editPoints->Point( DIM_CROSSBARO ).SetPosition( dimension->m_crossBarO );
m_editPoints->Point( DIM_CROSSBARF ).SetPosition( dimension->m_crossBarF );
m_editPoints->Point( DIM_FEATUREGO ).SetPosition( dimension->m_featureLineGO );
m_editPoints->Point( DIM_FEATUREDO ).SetPosition( dimension->m_featureLineDO );
break;
}
default:
break;
}
}
void POINT_EDITOR::setEditedPoint( EDIT_POINT* aPoint )
{
KIGFX::VIEW_CONTROLS* controls = getViewControls();
if( aPoint )
{
controls->ForceCursorPosition( true, aPoint->GetPosition() );
controls->ShowCursor( true );
controls->SetSnapping( true );
}
else
{
controls->ShowCursor( false );
controls->SetSnapping( false );
controls->ForceCursorPosition( false );
}
m_editedPoint = aPoint;
}
void POINT_EDITOR::setAltConstraint( bool aEnabled )
{
if( aEnabled )
{
EDIT_LINE* line = dynamic_cast<EDIT_LINE*>( m_editedPoint );
if( line )
{
if( m_editPoints->GetParent()->Type() == PCB_ZONE_AREA_T )
m_altConstraint.reset( (EDIT_CONSTRAINT<EDIT_POINT>*)( new EC_CONVERGING( *line, *m_editPoints ) ) );
}
else
{
// Find a proper constraining point for 45 degrees mode
m_altConstrainer = get45DegConstrainer();
m_altConstraint.reset( new EC_45DEGREE( *m_editedPoint, m_altConstrainer ) );
}
}
else
{
m_altConstraint.reset();
}
}
EDIT_POINT POINT_EDITOR::get45DegConstrainer() const
{
EDA_ITEM* item = m_editPoints->GetParent();
switch( item->Type() )
{
case PCB_LINE_T:
case PCB_MODULE_EDGE_T:
{
const DRAWSEGMENT* segment = static_cast<const DRAWSEGMENT*>( item );
{
switch( segment->GetShape() )
{
case S_SEGMENT:
return *( m_editPoints->Next( *m_editedPoint ) ); // select the other end of line
case S_ARC:
case S_CIRCLE:
return m_editPoints->Point( CIRC_CENTER );
default: // suppress warnings
break;
}
}
break;
}
case PCB_DIMENSION_T:
{
// Constraint for crossbar
if( isModified( m_editPoints->Point( DIM_FEATUREGO ) ) )
return m_editPoints->Point( DIM_FEATUREDO );
else if( isModified( m_editPoints->Point( DIM_FEATUREDO ) ) )
return m_editPoints->Point( DIM_FEATUREGO );
else
return EDIT_POINT( m_editedPoint->GetPosition() ); // no constraint
break;
}
default:
break;
}
// In any other case we may align item to its original position
return m_original;
}
void POINT_EDITOR::addCorner( const VECTOR2I& aBreakPoint )
{
EDA_ITEM* item = m_editPoints->GetParent();
const SELECTION& selection = m_selectionTool->GetSelection();
if( item->Type() == PCB_ZONE_AREA_T )
{
getEditFrame<PCB_BASE_FRAME>()->OnModify();
getEditFrame<PCB_BASE_FRAME>()->SaveCopyInUndoList( selection.items, UR_CHANGED );
ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
CPolyLine* outline = zone->Outline();
// Handle the last segment, so other segments can be easily handled in a loop
unsigned int nearestIdx = outline->GetCornersCount() - 1, nextNearestIdx = 0;
SEG side( VECTOR2I( outline->GetPos( nearestIdx ) ),
VECTOR2I( outline->GetPos( nextNearestIdx ) ) );
unsigned int nearestDist = side.Distance( aBreakPoint );
for( int i = 0; i < outline->GetCornersCount() - 1; ++i )
{
side = SEG( VECTOR2I( outline->GetPos( i ) ), VECTOR2I( outline->GetPos( i + 1 ) ) );
unsigned int distance = side.Distance( aBreakPoint );
if( distance < nearestDist )
{
nearestDist = distance;
nearestIdx = i;
nextNearestIdx = i + 1;
}
}
// Find the point on the closest segment
VECTOR2I sideOrigin( outline->GetPos( nearestIdx ) );
VECTOR2I sideEnd( outline->GetPos( nextNearestIdx ) );
SEG nearestSide( sideOrigin, sideEnd );
VECTOR2I nearestPoint = nearestSide.NearestPoint( aBreakPoint );
// Do not add points that have the same coordinates as ones that already belong to polygon
// instead, add a point in the middle of the side
if( nearestPoint == sideOrigin || nearestPoint == sideEnd )
nearestPoint = ( sideOrigin + sideEnd ) / 2;
outline->InsertCorner( nearestIdx, nearestPoint.x, nearestPoint.y );
}
else if( item->Type() == PCB_LINE_T || item->Type() == PCB_MODULE_EDGE_T )
{
bool moduleEdge = item->Type() == PCB_MODULE_EDGE_T;
PCB_BASE_FRAME* frame = getEditFrame<PCB_BASE_FRAME>();
frame->OnModify();
if( moduleEdge )
frame->SaveCopyInUndoList( getModel<BOARD>()->m_Modules, UR_MODEDIT );
else
frame->SaveCopyInUndoList( selection.items, UR_CHANGED );
DRAWSEGMENT* segment = static_cast<DRAWSEGMENT*>( item );
if( segment->GetShape() == S_SEGMENT )
{
SEG seg( segment->GetStart(), segment->GetEnd() );
VECTOR2I nearestPoint = seg.NearestPoint( aBreakPoint );
// Move the end of the line to the break point..
segment->SetEnd( wxPoint( nearestPoint.x, nearestPoint.y ) );
// and add another one starting from the break point
DRAWSEGMENT* newSegment;
if( moduleEdge )
{
EDGE_MODULE* edge = static_cast<EDGE_MODULE*>( segment );
assert( segment->GetParent()->Type() == PCB_MODULE_T );
newSegment = new EDGE_MODULE( *edge );
edge->SetLocalCoord();
}
else
{
newSegment = new DRAWSEGMENT( *segment );
}
newSegment->ClearSelected();
newSegment->SetStart( wxPoint( nearestPoint.x, nearestPoint.y ) );
newSegment->SetEnd( wxPoint( seg.B.x, seg.B.y ) );
if( moduleEdge )
{
static_cast<EDGE_MODULE*>( newSegment )->SetLocalCoord();
getModel<BOARD>()->m_Modules->Add( newSegment );
}
else
{
getModel<BOARD>()->Add( newSegment );
}
getView()->Add( newSegment );
}
}
}
void POINT_EDITOR::removeCorner( EDIT_POINT* aPoint )
{
EDA_ITEM* item = m_editPoints->GetParent();
if( item->Type() == PCB_ZONE_AREA_T )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_FRAME* frame = getEditFrame<PCB_BASE_FRAME>();
ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
CPolyLine* outline = zone->Outline();
for( int i = 0; i < outline->GetCornersCount(); ++i )
{
if( VECTOR2I( outline->GetPos( i ) ) == aPoint->GetPosition() )
{
frame->OnModify();
frame->SaveCopyInUndoList( selection.items, UR_CHANGED );
outline->DeleteCorner( i );
setEditedPoint( NULL );
break;
}
}
}
}
void POINT_EDITOR::SetTransitions()
{
Go( &POINT_EDITOR::OnSelectionChange, SELECTION_TOOL::SelectedEvent );
Go( &POINT_EDITOR::OnSelectionChange, SELECTION_TOOL::UnselectedEvent );
}
bool POINT_EDITOR::addCornerCondition( const SELECTION& aSelection )
{
if( aSelection.Size() != 1 )
return false;
BOARD_ITEM* item = aSelection.Item<BOARD_ITEM>( 0 );
// Works only for zones and line segments
return item->Type() == PCB_ZONE_AREA_T ||
( ( item->Type() == PCB_LINE_T || item->Type() == PCB_MODULE_EDGE_T ) &&
static_cast<DRAWSEGMENT*>( item )->GetShape() == S_SEGMENT );
}
bool POINT_EDITOR::removeCornerCondition( const SELECTION& )
{
if( !m_editPoints )
return false;
EDA_ITEM* item = m_editPoints->GetParent();
if( item->Type() != PCB_ZONE_AREA_T )
return false;
ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
if( zone->GetNumCorners() <= 3 )
return false;
// Remove corner does not work with lines
if( dynamic_cast<EDIT_LINE*>( m_editedPoint ) )
return false;
return m_editedPoint != NULL;
}