kicad/pcbnew/controle.cpp

372 lines
9.4 KiB
C++

/********************************************************/
/* Routines generales de gestion des commandes usuelles */
/********************************************************/
/* fichier controle.cpp */
/*
Routines d'affichage grille, Boite de coordonnees, Curseurs, marqueurs ...
*/
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "pcbnew.h"
#include "id.h"
#include "protos.h"
/* Routines Locales : */
/* Variables Locales */
/**********************************/
void RemoteCommand(char * cmdline)
/**********************************/
/* Read a remote command send by eeschema via a socket,
port KICAD_PCB_PORT_SERVICE_NUMBER (currently 4242)
*/
{
char Line[1024];
wxString msg;
char *idcmd, * text;
WinEDA_PcbFrame * frame = EDA_Appl->m_PcbFrame;
strncpy(Line, cmdline, sizeof(Line) -1 );
msg = CONV_FROM_UTF8(Line);
idcmd = strtok(Line," \n\r");
text = strtok(NULL," \n\r");
if ( (idcmd == NULL) || (text == NULL) ) return;
if( strcmp(idcmd,"$PART:") == 0 )
{
MODULE * Module;
msg = CONV_FROM_UTF8(text);
Module = ReturnModule(frame->m_Pcb, msg);
msg.Printf(_("Locate module %s %s"),msg.GetData(), Module ? wxT("Ok") : wxT("not found"));
frame->Affiche_Message(msg);
if ( Module )
{
wxClientDC dc(frame->DrawPanel);
frame->DrawPanel->PrepareGraphicContext(&dc);
frame->DrawPanel->CursorOff(&dc);
frame->GetScreen()->m_Curseur = Module->m_Pos;
frame->DrawPanel->CursorOn(&dc);
}
}
if(idcmd && strcmp(idcmd,"$PIN:") == 0)
{
wxString PinName, ModName;
MODULE * Module;
D_PAD * Pad = NULL;
int netcode = -1;
PinName = CONV_FROM_UTF8(text);
text = strtok(NULL," \n\r");
if(text && strcmp(text, "$PART:") == 0 ) text = strtok(NULL,"\n\r");
wxClientDC dc(frame->DrawPanel);
frame->DrawPanel->PrepareGraphicContext(&dc);
ModName = CONV_FROM_UTF8(text);
Module = ReturnModule(frame->m_Pcb, ModName);
if( Module ) Pad = ReturnPad(Module, PinName);
if( Pad ) netcode = Pad->m_NetCode;
if ( netcode > 0 )
{
/* effacement surbrillance ancienne */
if(g_HightLigt_Status) frame->Hight_Light(&dc);
g_HightLigth_NetCode = netcode;
frame->Hight_Light(&dc);
frame->DrawPanel->CursorOff(&dc);
frame->GetScreen()->m_Curseur = Pad->m_Pos;
frame->DrawPanel->CursorOn( &dc);
}
if ( Module == NULL )
msg.Printf( _("module %s not found"), text);
else if ( Pad == NULL )
msg.Printf( _("Pin %s (module %s) not found"), PinName.GetData(), ModName.GetData());
else
msg.Printf( _("Locate Pin %s (module %s)"), PinName.GetData(),ModName.GetData());
frame->Affiche_Message(msg);
}
}
/***********************************************************************/
EDA_BaseStruct * WinEDA_BasePcbFrame::PcbGeneralLocateAndDisplay(void)
/***********************************************************************/
/* Search an item under the mouse cursor.
items are searched first on the current working layer.
if nothing found, an item will be searched without layer restriction
*/
{
EDA_BaseStruct * item;
item = Locate(CURSEUR_OFF_GRILLE, GetScreen()->m_Active_Layer);
if ( item == NULL )
item = Locate(CURSEUR_OFF_GRILLE, -1);
return item;
}
/****************************************************************/
void WinEDA_BasePcbFrame::GeneralControle(wxDC *DC, wxPoint Mouse)
/*****************************************************************/
{
int ll;
wxSize delta;
int zoom = GetScreen()->GetZoom();
wxPoint curpos, oldpos;
int hotkey = 0;
ActiveScreen = GetScreen();
// Save the board after the time out :
int CurrentTime = time(NULL);
if( !GetScreen()->IsModify() || GetScreen()->IsSave() )
{ /* If no change, reset the time out */
g_SaveTime = CurrentTime;
}
if ( (CurrentTime - g_SaveTime) > g_TimeOut)
{
wxString tmpFileName = GetScreen()->m_FileName;
wxString filename = g_SaveFileName + PcbExtBuffer;
bool flgmodify = GetScreen()->IsModify();
((WinEDA_PcbFrame*)this)->SavePcbFile(filename);
if( flgmodify ) // Set the flags m_Modify cleared by SavePcbFile()
{
GetScreen()->SetModify();
GetScreen()->SetSave();// Set the flags m_FlagSave cleared by SetModify()
}
GetScreen()->m_FileName = tmpFileName;
SetTitle(GetScreen()->m_FileName);
}
curpos = DrawPanel->CursorRealPosition(Mouse);
oldpos = GetScreen()->m_Curseur;
delta.x = (int) round((double)GetScreen()->GetGrid().x / zoom);
delta.y = (int) round((double)GetScreen()->GetGrid().y / zoom);
if( delta.x <= 0 ) delta.x = 1;
if( delta.y <= 0 ) delta.y = 1;
switch(g_KeyPressed)
{
case WXK_NUMPAD_SUBTRACT :
case WXK_SUBTRACT :
case '-' :
ll = GetScreen()->m_Active_Layer;
if(ll > CMP_N) break;
if(ll <= CUIVRE_N) break;
if ( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1) // Single layer
ll = CUIVRE_N;
if ( ll == CMP_N )
ll = MAX(CUIVRE_N, m_Pcb->m_BoardSettings->m_CopperLayerCount-2);
else if ( ll > CUIVRE_N) ll--;
GetScreen()->m_Active_Layer = ll;
if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
break ;
case WXK_NUMPAD_ADD :
case WXK_ADD :
case '+' :
ll = GetScreen()->m_Active_Layer;
if(ll >= CMP_N) break;
ll++;
if ( ll >= m_Pcb->m_BoardSettings->m_CopperLayerCount-1 )
ll = CMP_N;
if ( m_Pcb->m_BoardSettings->m_CopperLayerCount <= 1) // Single layer
ll = CUIVRE_N;
GetScreen()->m_Active_Layer = ll;
if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
break ;
case WXK_NUMPAD0 :
case WXK_PAGEUP :
SwitchLayer(DC, CMP_N);
break ;
case WXK_NUMPAD9 :
case WXK_PAGEDOWN :
SwitchLayer(DC, CUIVRE_N);
break ;
case 'F' | GR_KB_CTRL :
case 'f' | GR_KB_CTRL:
DisplayOpt.DisplayPcbTrackFill ^= 1; DisplayOpt.DisplayPcbTrackFill &= 1 ;
GetScreen()->SetRefreshReq();
break ;
case ' ' : /* Mise a jour de l'origine des coord relatives */
GetScreen()->m_O_Curseur = GetScreen()->m_Curseur;
break ;
case 'U' | GR_KB_CTRL :
case 'u' | GR_KB_CTRL :
g_UnitMetric = (g_UnitMetric == INCHES ) ? MILLIMETRE : INCHES;
break ;
case EDA_PANNING_UP_KEY :
OnZoom(ID_ZOOM_PANNING_UP);
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_DOWN_KEY :
OnZoom(ID_ZOOM_PANNING_DOWN);
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_LEFT_KEY :
OnZoom(ID_ZOOM_PANNING_LEFT);
curpos = m_CurrentScreen->m_Curseur;
break;
case EDA_PANNING_RIGHT_KEY :
OnZoom(ID_ZOOM_PANNING_RIGHT);
curpos = m_CurrentScreen->m_Curseur;
break;
case WXK_F1 :
OnZoom(ID_ZOOM_PLUS_KEY);
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F2 :
OnZoom(ID_ZOOM_MOINS_KEY);
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F3 :
OnZoom(ID_ZOOM_REDRAW_KEY);
break;
case WXK_F4 :
OnZoom(ID_ZOOM_CENTER_KEY);
oldpos = curpos = GetScreen()->m_Curseur;
break;
case WXK_F5 :
SwitchLayer(DC, LAYER_N_2);
break;
case WXK_F6 :
SwitchLayer(DC, LAYER_N_3);
break;
case WXK_F7 :
SwitchLayer(DC, LAYER_N_4);
break;
case WXK_F8 :
SwitchLayer(DC, LAYER_N_5);
break;
case WXK_F9 :
SwitchLayer(DC, LAYER_N_6);
break;
case WXK_F10 :
SwitchLayer(DC, LAYER_N_7);
break;
case WXK_NUMPAD8 : /* Deplacement curseur vers le haut */
case WXK_UP :
Mouse.y -= delta.y;
DrawPanel->MouseTo(Mouse);
break ;
case WXK_NUMPAD2: /* Deplacement curseur vers le bas */
case WXK_DOWN:
Mouse.y += delta.y;
DrawPanel->MouseTo(Mouse);
break ;
case WXK_NUMPAD4: /* Deplacement curseur vers la gauche */
case WXK_LEFT :
Mouse.x -= delta.x;
DrawPanel->MouseTo(Mouse);
break ;
case WXK_NUMPAD6: /* Deplacement curseur vers la droite */
case WXK_RIGHT:
Mouse.x += delta.x;
DrawPanel->MouseTo(Mouse);
break ;
default: hotkey = g_KeyPressed;
break;
}
/* Put cursor in new position, according to the zoom keys (if any) */
GetScreen()->m_Curseur = curpos;
/* Put cursor on grid or a pad centre if requested
But if the tool DELETE is active the cursor is left off grid
this is better to reach items to delete off grid
*/
D_PAD * pad;
bool keep_on_grid = TRUE;
if (m_ID_current_state == ID_PCB_DELETE_ITEM_BUTT) keep_on_grid = FALSE;
/* Cursor is left off grid if no block in progress and no moving object */
if ( GetScreen()->BlockLocate.m_State != STATE_NO_BLOCK)
keep_on_grid = TRUE;
EDA_BaseStruct *DrawStruct = GetScreen()->m_CurrentItem;
if ( DrawStruct && DrawStruct->m_Flags ) keep_on_grid = TRUE;
switch ( g_MagneticPadOption )
{
case capture_cursor_in_track_tool:
case capture_always:
pad = Locate_Any_Pad(m_Pcb,CURSEUR_OFF_GRILLE, TRUE);
if ( (m_ID_current_state != ID_TRACK_BUTT ) &&
(g_MagneticPadOption == capture_cursor_in_track_tool) )
pad = NULL;
if (keep_on_grid)
{
if (pad) // Put cursor on the pad
GetScreen()->m_Curseur = curpos = pad->m_Pos;
else // Put cursor on grid
PutOnGrid( & GetScreen()->m_Curseur);
}
break;
case no_effect:
default:
// If we are not in delete function, put cursor on grid
if (keep_on_grid)
PutOnGrid( & GetScreen()->m_Curseur);
break;
}
if ( oldpos != GetScreen()->m_Curseur )
{
curpos = GetScreen()->m_Curseur;
GetScreen()->m_Curseur = oldpos;
DrawPanel->CursorOff(DC);
GetScreen()->m_Curseur = curpos;
DrawPanel->CursorOn(DC);
if(DrawPanel->ManageCurseur)
{
DrawPanel->ManageCurseur(DrawPanel, DC, TRUE);
}
}
if( GetScreen()->IsRefreshReq() )
{
RedrawActiveWindow(DC, TRUE);
}
SetToolbars();
Affiche_Status_Box(); /* Affichage des coord curseur */
if ( hotkey )
{
OnHotKey(DC, hotkey, NULL);
}
}