kicad/pcbnew/automove.cpp

428 lines
12 KiB
C++

/****************************************************************/
/* Routines de deplacement automatique et rotation des MODULES */
/* routines et menu d'autoplacement */
/****************************************************************/
/* Fichier automove.cpp */
#include "fctsys.h"
#include "gr_basic.h"
#include "common.h"
#include "pcbnew.h"
#include "autorout.h"
#include "cell.h"
#include "id.h"
#include "protos.h"
/* variables locales */
typedef enum {
FIXE_MODULE,
FREE_MODULE,
FIXE_ALL_MODULES,
FREE_ALL_MODULES
} SelectFixeFct;
/* Fonctions locales */
static int tri_modules( MODULE** pt_ref, MODULE** pt_compare );
/* Variables locales */
wxString ModulesMaskSelection = wxT( "*" );
int ModulesNewOrient;
/******************************************************/
void WinEDA_PcbFrame::AutoPlace( wxCommandEvent& event )
/******************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
wxPoint pos;
wxClientDC dc( DrawPanel );
bool on_state;
if( m_HToolBar == NULL )
return;
DrawPanel->PrepareGraphicContext( &dc );
wxGetMousePosition( &pos.x, &pos.y );
switch( id ) // Arret eventuel de la commande de déplacement en cours
{
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( DrawPanel->ManageCurseur
&& DrawPanel->ForceCloseManageCurseur )
{
DrawPanel->ForceCloseManageCurseur( DrawPanel, &dc );
}
break;
default: // Arret de la commande de déplacement en cours
if( DrawPanel->ManageCurseur
&& DrawPanel->ForceCloseManageCurseur )
{
DrawPanel->ForceCloseManageCurseur( DrawPanel, &dc );
}
m_ID_current_state = 0;
DisplayToolMsg( wxEmptyString );
DrawPanel->SetCursor( wxCursor( wxCURSOR_ARROW ) );
break;
}
/* Erase rastnest if needed */
if( g_Show_Ratsnest )
DrawGeneralRatsnest( &dc );
m_Pcb->m_Status_Pcb |= DO_NOT_SHOW_GENERAL_RASTNEST;
switch( id ) // Traitement des commandes
{
case ID_TOOLBARH_PCB_AUTOPLACE:
on_state = m_HToolBar->GetToolState( ID_TOOLBARH_PCB_AUTOPLACE );
if( on_state )
{
m_HToolBar->ToggleTool( ID_TOOLBARH_PCB_AUTOROUTE, FALSE );
m_HTOOL_current_state = ID_TOOLBARH_PCB_AUTOPLACE;
}
else
m_HTOOL_current_state = 0;
break;
case ID_TOOLBARH_PCB_AUTOROUTE:
on_state = m_HToolBar->GetToolState( ID_TOOLBARH_PCB_AUTOROUTE );
if( on_state )
{
m_HToolBar->ToggleTool( ID_TOOLBARH_PCB_AUTOPLACE, FALSE );
m_HTOOL_current_state = ID_TOOLBARH_PCB_AUTOROUTE;
}
else
m_HTOOL_current_state = 0;
break;
case ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE:
FixeModule( (MODULE*) GetScreen()->GetCurItem(), TRUE );
break;
case ID_POPUP_PCB_AUTOPLACE_FREE_MODULE:
FixeModule( (MODULE*) GetScreen()->GetCurItem(), FALSE );
break;
case ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES:
FixeModule( NULL, FALSE );
break;
case ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES:
FixeModule( NULL, TRUE );
break;
case ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE:
AutoPlaceModule( (MODULE*) GetScreen()->GetCurItem(),
PLACE_1_MODULE, &dc );
break;
case ID_POPUP_PCB_AUTOPLACE_ALL_MODULES:
AutoPlaceModule( NULL, PLACE_ALL, &dc );
break;
case ID_POPUP_PCB_AUTOPLACE_NEW_MODULES:
AutoPlaceModule( NULL, PLACE_OUT_OF_BOARD, &dc );
break;
case ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE:
AutoPlaceModule( NULL, PLACE_INCREMENTAL, &dc );
break;
case ID_POPUP_PCB_AUTOMOVE_ALL_MODULES:
AutoMoveModulesOnPcb( &dc, FALSE );
break;
case ID_POPUP_PCB_AUTOMOVE_NEW_MODULES:
AutoMoveModulesOnPcb( &dc, TRUE );
break;
case ID_POPUP_PCB_REORIENT_ALL_MODULES:
ReOrientModules( ModulesMaskSelection, ModulesNewOrient, FALSE, &dc );
break;
case ID_POPUP_PCB_AUTOROUTE_ALL_MODULES:
Autoroute( &dc, ROUTE_ALL );
break;
case ID_POPUP_PCB_AUTOROUTE_MODULE:
Autoroute( &dc, ROUTE_MODULE );
break;
case ID_POPUP_PCB_AUTOROUTE_PAD:
Autoroute( &dc, ROUTE_PAD );
break;
case ID_POPUP_PCB_AUTOROUTE_NET:
Autoroute( &dc, ROUTE_NET );
break;
case ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED:
Reset_Noroutable( &dc );
break;
case ID_POPUP_PCB_AUTOROUTE_SELECT_LAYERS:
break;
default:
DisplayError( this, wxT( "AutoPlace command error" ) );
break;
}
m_Pcb->m_Status_Pcb &= ~DO_NOT_SHOW_GENERAL_RASTNEST;
ReCompile_Ratsnest_After_Changes( &dc );
SetToolbars();
}
/*****************************************************************************/
void WinEDA_PcbFrame::AutoMoveModulesOnPcb( wxDC* DC, bool PlaceModulesHorsPcb )
/*****************************************************************************/
/* Routine de repartition des composants dans un rectangle de format 4 / 3,
* partant du curseur souris
* Les composants ayant le status FIXE ne sont normalement pas bouges
* Selon les flags:
* Tous les modules (non fixes) seront repartis
* Seuls les modules Hors PCB seront repartis
*/
{
MODULE** pt_Dmod, ** BaseListeModules;
MODULE* Module;
wxPoint start, current;
int Ymax_size, Xsize_allowed;
int pas_grille = GetScreen()->GetGrid().x;
bool EdgeExists;
float surface;
if( m_Pcb->m_Modules == NULL )
{
DisplayError( this, _( "No Modules!" ), 10 ); return;
}
/* Confirmation */
if( !IsOK( this, _( "Move Modules ?" ) ) )
return;
EdgeExists = SetBoardBoundaryBoxFromEdgesOnly();
if( PlaceModulesHorsPcb && !EdgeExists )
{
DisplayError( this,
_(
"Autoplace modules: No boad edges detected, unable to place modules" ),
20 );
return;
}
Module = m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext ) // remise a jour du rect d'encadrement
{
Module->Set_Rectangle_Encadrement();
Module->SetRectangleExinscrit();
}
BaseListeModules = GenListeModules( m_Pcb, NULL );
/* Si repartition de modules Hors PCB, le curseur est mis au dessous
* du PCB, pour eviter de placer des composants dans la zone PCB
*/
if( PlaceModulesHorsPcb && EdgeExists )
{
if( GetScreen()->m_Curseur.y < (m_Pcb->m_BoundaryBox.GetBottom() + 2000) )
GetScreen()->m_Curseur.y = m_Pcb->m_BoundaryBox.GetBottom() + 2000;
}
/* calcul de la surface occupee par les circuits */
surface = 0.0;
for( pt_Dmod = BaseListeModules; *pt_Dmod != NULL; pt_Dmod++ )
{
Module = *pt_Dmod;
if( PlaceModulesHorsPcb && EdgeExists )
{
if( m_Pcb->m_BoundaryBox.Inside( Module->m_Pos ) )
continue;
}
surface += Module->m_Surface;
}
Xsize_allowed = (int) (sqrt( surface ) * 4.0 / 3.0);
/* Placement des modules */
start = current = GetScreen()->m_Curseur;
Ymax_size = 0;
for( pt_Dmod = BaseListeModules; *pt_Dmod != NULL; pt_Dmod++ )
{
Module = *pt_Dmod;
if( Module->IsLocked() )
continue;
if( PlaceModulesHorsPcb && EdgeExists )
{
if( m_Pcb->m_BoundaryBox.Inside( Module->m_Pos ) )
continue;
}
if( current.x > (Xsize_allowed + start.x) )
{
current.x = start.x;
current.y += Ymax_size + pas_grille;
Ymax_size = 0;
}
GetScreen()->m_Curseur.x =
current.x + Module->m_Pos.x - Module->m_RealBoundaryBox.GetX();
GetScreen()->m_Curseur.y =
current.y + Module->m_Pos.y - Module->m_RealBoundaryBox.GetY();
Ymax_size = MAX( Ymax_size, Module->m_RealBoundaryBox.GetHeight() );
PutOnGrid( &GetScreen()->m_Curseur );
Module->Draw( DrawPanel, DC, GR_XOR );
Place_Module( Module, DC ); /* positionne Module et recalcule cadre */
current.x += Module->m_RealBoundaryBox.GetWidth() + pas_grille;
}
MyFree( BaseListeModules );
GetScreen()->SetRefreshReq();
}
/***********************************************************/
void WinEDA_PcbFrame::FixeModule( MODULE* Module, bool Fixe )
/***********************************************************/
/* Met a jour (FALSE ou TRUE) l'attribut FIXE sur le module Module,
* ou sur tous les modules si Modulle == NULL
*/
{
if( Module ) /* Traitement du module */
{
Module->SetLocked( Fixe );
Module->Display_Infos( this );
GetScreen()->SetModify();
}
else
{
Module = m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
{
if( WildCompareString( ModulesMaskSelection, Module->m_Reference->m_Text ) )
{
Module->SetLocked( Fixe );
GetScreen()->SetModify();
}
}
}
}
/*******************************************************************/
void WinEDA_PcbFrame::ReOrientModules( const wxString& ModuleMask,
int Orient, bool include_fixe, wxDC* DC )
/*******************************************************************/
/*
* Reoriente tous les modules selon masque et attribut, avec la nouvelle
* orientation selectionnee
*/
{
MODULE* Module;
wxString line;
line.Printf( _( "Ok to set module orientation to %d degrees ?" ), Orient / 10 );
if( !IsOK( this, line ) )
return;
Module = m_Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
{
if( Module->IsLocked() && !include_fixe )
continue;
if( WildCompareString( ModuleMask, Module->m_Reference->m_Text, FALSE ) )
{
GetScreen()->SetModify();
Module->Draw( DrawPanel, DC, GR_XOR );
Rotate_Module( NULL, Module, Orient, FALSE );
Module->Draw( DrawPanel, DC, GR_OR );
}
}
}
/*********************************************************/
MODULE** GenListeModules( BOARD* Pcb, int* NbModules )
/*********************************************************/
/* Cree par allocation memoire la liste ordonnee des structures D_MODULES
* decrivant les modules a deplacer
* la fin de la liste est signalee par NULL
* Retourne egalement le nombre de modules par *NbModules
* Penser a desallouer la memoire apres usage
*/
{
MODULE* Module;
MODULE** ListeMod, ** PtList;
int NbMod;
/* Reservation de la memoire pour description des modules que l'on
* peut deplacer */
Module = Pcb->m_Modules;
NbMod = 0;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
NbMod++;
ListeMod = (MODULE**) MyZMalloc( (NbMod + 1) * sizeof(MODULE *) );
if( ListeMod == NULL )
{
if( NbModules != NULL )
*NbModules = 0;
return NULL;
}
PtList = ListeMod;
Module = Pcb->m_Modules;
for( ; Module != NULL; Module = (MODULE*) Module->Pnext )
{
*PtList = Module; PtList++;
Module->SetRectangleExinscrit();
}
/* Tri par surface decroissante des modules ( on place les plus gros en 1er) */
qsort( ListeMod, NbMod, sizeof(MODULE * *),
( int( * ) ( const void*, const void* ) )tri_modules );
if( NbModules != NULL )
*NbModules = NbMod;
return ListeMod;
}
/**************************************************/
/* Routine de tri de modules, utilisee par qsort: */
/**************************************************/
static int tri_modules( MODULE** pt_ref, MODULE** pt_compare )
{
float ff;
ff = (*pt_ref)->m_Surface - (*pt_compare)->m_Surface;
if( ff < 0 )
return 1;
if( ff > 0 )
return -1;
return 0;
}