kicad/bitmaps_png/CMakeLists.txt

685 lines
16 KiB
CMake

# This program source code file is part of KICAD, a free EDA CAD application.
#
# Copyright (C) 2011 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
# Copyright (C) 2011 Kicad Developers, see change_log.txt for contributors#.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, you may find one here:
# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
# or you may search the http://www.gnu.org website for the version 2 license,
# or you may write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
#
# In this directory, a number of different processes are managed:
#
# 1) PNG files are created from SVG files
# 2) CPP files are created from PNG files.
# 3) Object files are created from CPP files.
# Step 3) is universal and is done for any builder, whereas steps 1) and 2) are
# optional and depend on MAINTAIN_PNGS being defined in CMake. The reason we
# can skip 1) and 2) is that the *.CPP files are part of the source tree so
# do not need to rebuilt by a typical builder. However, because the *.CPP files
# are part of the source tree, and subject to version control, they should be built
# only when needed, otherwise this results in a diff for the version control system.
# Therefore steps 1) and 2) are driven by CMake (if MAINTAIN_PNGS) which gives
# us conditional *.CPP building based on an edit to the respective *.SVG file.
# If MAINTAIN_PNGS is not defined, then you are a normal builder and no special
# tools are required. If MAINTAIN_PNG is defined, then you are a PNG maintainer
# and will need the following tools findable in your PATH:
#
# 1) imagemagick - all its programs must be on your PATH
# 2) inkscape - command line mode is used, must be on your PATH
# 3) pngcrush -
#
# lower case is used for local variables, uppercase for global variables
# If this file is used as part of the Kicad build, disable the stand alone build mode.
if( NOT DEFINED CMAKE_PROJECT_NAME )
# stand alone debugging
project( kicad_for_bitmaps )
cmake_minimum_required( VERSION 2.8.0 FATAL_ERROR )
include_directories( /svn/kicad/work/include )
set( CMAKE_MODULE_PATH /svn/kicad/work/CMakeModules )
add_definitions( -I/usr/lib/wx/include/gtk2-unicode-release-2.8 -I/usr/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXGTK__ -pthread )
endif( NOT DEFINED CMAKE_PROJECT_NAME )
option( MAINTAIN_PNGS
"Set to true if you are a PNG maintainer and have the required tools given in the bitmaps_png/CMakeLists.txt file (default OFF)."
OFF)
include_directories(BEFORE ${INC_BEFORE})
include_directories(
${INC_AFTER}
)
# Plan for three sizes of bitmaps:
# SMALL - for listboxes or comboboxes and perhaps menus
# MID - for toolbars 26 x 26
# BIG - for program icons 48 x 48
# which are given on three basename lists: BMAPS_SMALL, BMAPS_MID,a nd BMAPS_BIG
# respectively. The basename is without file extension and without path.
# A corresponding ${basename}.svg file must exist in 'sources' dir below here.
# small icons (16x16) needed in listboxes
set( BMAPS_SMALL
pinorient_right
pinorient_left
pinorient_up
pinorient_down
pinshape_normal
pinshape_invert
pinshape_clock_normal
pinshape_clock_invert
pinshape_active_low_input
pinshape_clock_active_low
pinshape_active_low_output
pinshape_clock_fall
pinshape_nonlogic
pintype_input
pintype_output
pintype_bidi
pintype_3states
pintype_passive
pintype_notspecif
pintype_powerinput
pintype_poweroutput
pintype_opencoll
pintype_openemit
pintype_noconnect
tree_nosel
tree_sel
)
# image basenames that go into the toolbar sized destinations, i.e. 26x26
set( BMAPS_MID
add_arc
add_bus2bus
add_bus
add_circle
add_component
add_corner
add_dashed_line
add_dimension
add_entry
add_glabel
add_hierarchical_label
add_hierar_pin
add_hierarchical_subsheet
add_junction
add_keepout_area
add_line2bus
add_line_label
add_line
add_mires
add_polygon
add_power
add_rectangle
add_text
add_tracks
add_zone_cutout
add_zone
anchor
annotate_down_right
annotate_right_down
annotate
apply
auto_associe
auto_delete_track
auto_track_width
axis3d_back
axis3d_bottom
axis3d_front
axis3d_left
axis3d_right
axis3d_top
axis3d
bom
book
break_bus
break_line
browse_files
cancel
change_entry_orient
create_cmp_file
checked_ok
component_select_unit
component_select_alternate_shape
config
copyblock
copycomponent
copy_button
copper_layers_setup
cursor_shape
cursor
cut_button
cvpcb
dashline
datasheet
delete_arc
delete_association
delete_bus
delete_circle
delete_connection
delete_cotation
delete_field
delete_glabel
delete_line
delete_module
delete_net
delete_node
delete_pad
delete_pinsheet
delete_pin
delete_polygon
delete_rectangle
delete_segment
delete_sheet
delete_text
delete_track
delete
directory
display_options
down
drag_module
drag_outline_segment
drag_pad
drag_segment_withslope
drag_track_segment
drc_off
drc
edges_sketch
edit_comp_footprint
edit_component
edit_comp_ref
edit_comp_value
edit_module
editor
edit_part
edit_sheet
edit_text
edit
eeschema
enter_sheet
ercerr
erc_green
ercwarn
erc
exit
export_footprint_names
export_module
export_options_pad
export
fabrication
file_footprint
fill_zone
find
find_replace
flag
fonts
footprint_text
gbr_select_mode0
gbr_select_mode1
gbr_select_mode2
gerber_file
gerber_recent_files
gerber_open_dcode_file
gerbview_drill_file
gerbview_clear_layers
gerbview_open_recent_drill_files
general_deletions
general_ratsnest
glabel2label
glabel2text
gl_change
global_options_pad
green
grid_select
grid_select_axis
grid
hammer
help
hidden_pin
hierarchy_cursor
hierarchy_nav
hotkeys
icon_cvpcb_small
icon_gerbview_small
icon_txt
import3d
image
import_cmp_from_lib
import_footprint_names
import_hierarchical_label
import_module
import
info
insert_module_board
invert_module
invisible_text
jigsaw
kicad_icon_small
label2glabel
label2text
label
lang_catalan
lang_chinese
lang_bg
lang_cs
lang_def
lang_de
lang_en
lang_es
lang_fr
lang_fi
lang_gr
lang_hu
lang_it
lang_jp
lang_ko
lang_nl
lang_pl
lang_pt
lang_ru
lang_sl
language
layers_manager
leave_sheet
left
libedit
libedprt
lib_next
lib_previous
library_browse
library_update
library
libview
lines90
load_module_board
load_module_lib
local_ratsnest
locked
macros_record
mirepcb
mirror_h
mirror_v
mode_module
mode_track
modratsnest
module_check
module_edit
module_wizard
module_filtered_list
module_full_list
module_options
module_pin_filtered_list
module_ratsnest
module
modview_icon
morgan1
morgan2
move_arc
move_circle
move_field
move_glabel
move_line
move_module
move_pad
move_pinsheet
move_pin
move_polygon
move_rectangle
move_sheet
move_text
move_track_segment
move_track
move
mw_add_gap
mw_add_line
mw_add_shape
mw_add_stub_arc
mw_add_stub
mw_toolbar
net_highlight
netlist
net_locked
net_unlocked
new_component
new_cvpcb
new_footprint
new_library
new_pcb
new_project
new_sch
new_txt
new
noconn
normal
online_help
open_brd_file
open_library
open_project
open_document
options_all_tracks_and_vias
options_all_tracks
options_all_vias
options_arc
options_circle
options_module
options_new_pad
options_pad
options_pinsheet
options_pin
options_rectangle
options_segment
options_text
options_tracks
options_track
options_vias
opt_show_polygon
orient
ortho
pad_sketch
pad
pads_mask_layers
palette
part_properties
paste
pcbnew
pcb_offset
pin2pin
pin_name_to
pin_number_to
pin_size_to
pin_to
pin
plot_hpg
plot_pdf
plot_ps
plot
polar_coord
post_compo
post_drill
post_module
preference
print_button
ratsnest
read_setup
redo
red
reload2
reload
reset_text
resize_sheet
right
rotate_field
rotate_glabel
rotate_module_neg
rotate_module_pos
rotate_pin
rotate_ccw
rotate_cw
rotate_neg_x
rotate_pos_x
rotate_neg_y
rotate_pos_y
rotate_neg_z
rotate_pos_z
save_as
save_library
save_netlist
save_part_in_mem
save_project
save_setup
save
schematic
select_grid
select_layer_pair
select_w_layer
shape_3d
sheetset
show_dcodenumber
show_footprint
show_mod_edge
showtrack
show_zone
show_zone_disable
show_zone_outline_only
swap_layer
text_sketch
three_d
tool_ratsnest
tools
track_locked
track_sketch
track_unlocked
transistor
undelete
undo
unit_inch
unit_mm
unknown
unlocked
unzip
update_module_board
up
via
via_sketch
warning
web_support
width_net
width_segment
width_track_via
width_track
width_vias
window_close
zip_tool
zip
zone_duplicate
zone_unfill
zoom
zoom_area
zoom_fit_in_page
zoom_center_on_screen
zoom_in
zoom_out
zoom_redraw
zoom_selection
)
# 48 x 48 for now
set( BMAPS_BIG
dialog_warning
icon_3d
icon_cvpcb
icon_eeschema
icon_gerbview
icon_kicad
icon_modedit
icon_pcbnew
icon_bitmap2component
icon_pcbcalculator
libedit_icon
viewlibs_icon
)
# @todo keep these in sync with .bzrignore
set( TMP_DIR "${CMAKE_CURRENT_SOURCE_DIR}/tmp" )
function( svg2png inputFile outFile pngWidth pngHeight )
#message( "svg2png( inputFile: ${inputFile} outFile: ${outFile} pngWidth: ${pngWidth} pngHeight: ${pngHeight})")
get_filename_component( bmn ${inputFile} NAME_WE )
add_custom_command(
OUTPUT ${outFile}
COMMAND ${Inkscape_EXECUTABLE} --export-area-snap -f ${inputFile} -e ${outFile} -w ${pngWidth} -h ${pngHeight} > ${TMP_DIR}/${bmn}.inkscape.log
DEPENDS ${inputFile}
COMMENT "Creating ${pngHeight} pixel tall ${outFile}"
)
endfunction()
# Function png2png
# converts a basic PNG to one
function( png2png inputFile outFile )
get_filename_component( bmn ${inputFile} NAME_WE )
add_custom_command(
OUTPUT ${outFile}
# pngcrush all icons without background to remove any extraneous tEXt records.
COMMAND ${pngcrush_EXECUTABLE} -rem alla ${inputFile} ${outFile} > ${TMP_DIR}/${bmn}.pngcrush.log
DEPENDS ${inputFile}
COMMENT "Creating ${outFile}"
)
endfunction()
# Function png2cpp
# converts a single *.png to *.cpp
function( png2cpp inputFile outFile )
add_custom_command(
OUTPUT ${outFile}
COMMAND ${CMAKE_COMMAND} -DinputFile=${inputFile} -DoutCppFile=${outFile}
-P ${CMAKE_MODULE_PATH}/PNG2cpp.cmake
DEPENDS ${inputFile} ${CMAKE_MODULE_PATH}/PNG2cpp.cmake
COMMENT "Creating ${outFile}"
)
endfunction()
# Function bitmap_dir
# converts all the basenames in bmapList found in hardcoded 'sources' dir
# and and puts them into cpp_${pngHeight} and png_${pngHeight} directories.
function( bitmap_dir pngWidth pngHeight bmapList )
set( cppDir "${CMAKE_CURRENT_SOURCE_DIR}/cpp_${pngHeight}" )
set( pngDir "${CMAKE_CURRENT_SOURCE_DIR}/png_${pngHeight}" )
file( MAKE_DIRECTORY ${pngDir} ${cppDir} )
#file( REMOVE_RECURSE ${TMP_DIR} )
file( MAKE_DIRECTORY ${TMP_DIR} )
#svg2png( inputFile outFile pngWidth pngHeight )
foreach( bmn ${bmapList} )
set( pngFile "${pngDir}/${bmn}.png" )
set( cppFile "${cppDir}/${bmn}.cpp" )
set( tmpFile "${TMP_DIR}/${bmn}.png" )
#svg2png( inputFile outFile pngWidth pngHeight )
svg2png( ${CMAKE_CURRENT_SOURCE_DIR}/sources/${bmn}.svg ${tmpFile} ${pngWidth} ${pngHeight} )
#png2png( inputFile outFile )
png2png( ${tmpFile} ${pngFile} )
#png2cpp( inputFile outFile )
png2cpp( ${pngFile} ${cppFile} )
endforeach()
endfunction()
if( MAINTAIN_PNGS )
# Inkscape is required to convert SVG files to PNG files.
set( Inkscape_FOUND FALSE )
if( NOT Inkscape_FOUND )
find_program( Inkscape_EXECUTABLE inkscape
PATHS "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\Inkscape;InstallDir]"
DOC "Inkscape vector drawing program." )
if( NOT Inkscape_EXECUTABLE )
message( FATAL_ERROR "Could not find the Inkscape vector drawing program." )
else( NOT Inkscape_EXECUTABLE )
set( Inkscape_FOUND TRUE )
set( Inkscape_EXECUTABLE ${Inkscape_EXECUTABLE}
CACHE FILEPATH "Path and file name of the Inkscape program." )
message( STATUS "The Inkscape vector drawing program found." )
endif( NOT Inkscape_EXECUTABLE )
endif( NOT Inkscape_FOUND )
# pngcrush is required to reduce the size of the converted PNG files.
set( pngcrush_FOUND FALSE )
if( NOT pngcrush_FOUND )
find_program( pngcrush_EXECUTABLE pngcrush DOC "The PNG size reduction program." )
if( NOT pngcrush_EXECUTABLE )
message( FATAL_ERROR "Could not find the pngcrush PNG size reduction program." )
else( NOT pngcrush_EXECUTABLE )
set( pngcrush_FOUND TRUE )
set( pngcrush_EXECUTABLE ${pngcrush_EXECUTABLE}
CACHE FILEPATH "Path and file name of the pngcrush program." )
message( STATUS "The pngcrush PNG size reduction program found." )
endif( NOT pngcrush_EXECUTABLE )
endif( NOT pngcrush_FOUND )
# these 3 cmake commands for each desired bitmap size set, repeat as needed:
bitmap_dir( 16 16 "${BMAPS_SMALL}" )
bitmap_dir( 26 26 "${BMAPS_MID}" )
bitmap_dir( 48 48 "${BMAPS_BIG}" )
#message( "CPP_LIST: ${CPP_LIST}" )
# a target with no output, just so changes get built
#add_custom_target( make_cpp_files ALL DEPENDS ${CPP_LIST} )
endif( MAINTAIN_PNGS )
set( CPP_LIST "" )
foreach( bmn ${BMAPS_SMALL} )
#message( "library add cpp_16/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_16/${bmn}.cpp )
endforeach()
foreach( bmn ${BMAPS_MID} )
#message( "library add cpp_26/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_26/${bmn}.cpp )
endforeach()
foreach( bmn ${BMAPS_BIG} )
#message( "library add cpp_48/${bmn}.cpp" )
list( APPEND CPP_LIST cpp_48/${bmn}.cpp )
endforeach()
#add_library( bitmaps SHARED ${CPP_LIST} )
add_library( bitmaps STATIC ${CPP_LIST} )