haskal
/
kicad
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
kicad/include/pcbstruct.h

298 lines
12 KiB
C++
Raw Blame History

/**************************************************************/
/* pcbstruct.h : definition des structures de donnees type PCB */
/**************************************************************/
#ifndef PCBSTRUCT_H
#define PCBSTRUCT_H
#include "base_struct.h"
#include "board_item_struct.h"
// Definitions relatives aux libariries
#define ENTETE_LIBRAIRIE "PCBNEW-LibModule-V1"
#define ENTETE_LIBDOC "PCBNEW-LibDoc----V1"
#define L_ENTETE_LIB 18
#define EXT_CMP wxT( ".emp" )
#define EXT_CMP_MASK wxT( "*.emp" )
#define EXT_DOC wxT( ".mdc" )
/* Bits indicateurs du membre .Status, pour pistes, modules... */
#define FLAG1 0x2000 /* flag libre pour calculs locaux */
#define FLAG0 0x1000 /* flag libre pour calculs locaux */
#define BEGIN_ONPAD 0x800 /* flag indiquant un debut de segment sur pad */
#define END_ONPAD 0x400 /* flag indiquant une fin de segment sur pad */
#define BUSY 0x0200 /* flag indiquant que la structure a deja
* ete examinee, dans certaines routines */
#define DELETED 0x0100 /* Bit flag de Status pour structures effacee
* et mises en chaine "DELETED" */
#define NO_TRACE 0x80 /* l'element ne doit pas etre affiche */
#define SURBRILL 0x20 /* element en surbrillance */
#define DRAG 0x10 /* segment en mode drag */
#define EDIT 0x8 /* element en cours d'edition */
#define SEGM_FIXE 0x04 /* segment FIXE ( pas d'effacement global ) */
#define SEGM_AR 0x02 /* segment Auto_Route */
#define CHAIN 0x01 /* segment marque */
/* Layer identification (layer number) */
#define FIRST_COPPER_LAYER 0
#define COPPER_LAYER_N 0
#define LAYER_N_2 1 /* Numero layer 2 */
#define LAYER_N_3 2 /* Numero layer 3 */
#define LAYER_N_4 3 /* Numero layer 4 */
#define LAYER_N_5 4 /* Numero layer 5 */
#define LAYER_N_6 5 /* Numero layer 6 */
#define LAYER_N_7 6 /* Numero layer 7 */
#define LAYER_N_8 7 /* Numero layer 8 */
#define LAYER_N_9 8 /* Numero layer 9 */
#define LAYER_N_10 9 /* Numero layer 10 */
#define LAYER_N_11 10 /* Numero layer 11 */
#define LAYER_N_12 11 /* Numero layer 12 */
#define LAYER_N_13 12 /* Numero layer 13 */
#define LAYER_N_14 13 /* Numero layer 14 */
#define LAYER_N_15 14 /* Numero layer 15 */
#define LAYER_CMP_N 15
#define CMP_N 15
#define LAST_COPPER_LAYER 15
#define NB_COPPER_LAYERS (LAST_COPPER_LAYER + 1)
#define FIRST_NO_COPPER_LAYER 16
#define ADHESIVE_N_CU 16
#define ADHESIVE_N_CMP 17
#define SOLDERPASTE_N_CU 18
#define SOLDERPASTE_N_CMP 19
#define SILKSCREEN_N_CU 20
#define SILKSCREEN_N_CMP 21
#define SOLDERMASK_N_CU 22
#define SOLDERMASK_N_CMP 23
#define DRAW_N 24
#define COMMENT_N 25
#define ECO1_N 26
#define ECO2_N 27
#define EDGE_N 28
#define LAST_NO_COPPER_LAYER 28
#define NB_LAYERS (LAST_NO_COPPER_LAYER + 1)
#define LAYER_COUNT 32
/*************************************/
/* constantes de gestion des couches */
/*************************************/
#define CUIVRE_LAYER (1 << COPPER_LAYER_N) ///< bit mask for copper layer
#define LAYER_2 (1 << LAYER_N_2) ///< bit mask for layer 2
#define LAYER_3 (1 << LAYER_N_3) ///< bit mask for layer 3
#define LAYER_4 (1 << LAYER_N_4) ///< bit mask for layer 4
#define LAYER_5 (1 << LAYER_N_5) ///< bit mask for layer 5
#define LAYER_6 (1 << LAYER_N_6) ///< bit mask for layer 6
#define LAYER_7 (1 << LAYER_N_7) ///< bit mask for layer 7
#define LAYER_8 (1 << LAYER_N_8) ///< bit mask for layer 8
#define LAYER_9 (1 << LAYER_N_9) ///< bit mask for layer 9
#define LAYER_10 (1 << LAYER_N_10) ///< bit mask for layer 10
#define LAYER_11 (1 << LAYER_N_11) ///< bit mask for layer 11
#define LAYER_12 (1 << LAYER_N_12) ///< bit mask for layer 12
#define LAYER_13 (1 << LAYER_N_13) ///< bit mask for layer 13
#define LAYER_14 (1 << LAYER_N_14) ///< bit mask for layer 14
#define LAYER_15 (1 << LAYER_N_15) ///< bit mask for layer 15
#define CMP_LAYER (1 << LAYER_CMP_N) ///< bit mask for component layer
#define ADHESIVE_LAYER_CU (1 << ADHESIVE_N_CU)
#define ADHESIVE_LAYER_CMP (1 << ADHESIVE_N_CMP)
#define SOLDERPASTE_LAYER_CU (1 << SOLDERPASTE_N_CU)
#define SOLDERPASTE_LAYER_CMP (1 << SOLDERPASTE_N_CMP)
#define SILKSCREEN_LAYER_CU (1 << SILKSCREEN_N_CU)
#define SILKSCREEN_LAYER_CMP (1 << SILKSCREEN_N_CMP)
#define SOLDERMASK_LAYER_CU (1 << SOLDERMASK_N_CU)
#define SOLDERMASK_LAYER_CMP (1 << SOLDERMASK_N_CMP)
#define DRAW_LAYER (1 << DRAW_N)
#define COMMENT_LAYER (1 << COMMENT_N)
#define ECO1_LAYER (1 << ECO1_N)
#define ECO2_LAYER (1 << ECO2_N)
#define EDGE_LAYER (1 << EDGE_N)
#define FIRST_NON_COPPER_LAYER ADHESIVE_N_CU
#define LAST_NON_COPPER_LAYER EDGE_N
// extra bits 0xE0000000
/* masques generaux : */
#define ALL_LAYERS 0x1FFFFFFF
#define ALL_NO_CU_LAYERS 0x1FFF0000
#define ALL_CU_LAYERS 0x0000FFFF
#define INTERNAL_LAYERS 0x00007FFE /* Bits layers internes */
#define EXTERNAL_LAYERS 0x00008001
/* Forward declaration */
class EQUIPOT;
class MARKER;
struct CHEVELU;
//class Ki_PageDescr;
//class DrawBlockStruct;
/* main window classes : */
#include "wxPcbStruct.h"
/* Class to handle a board */
#include "class_board.h"
// Class for handle current printed board design settings
#define HISTORY_NUMBER 8
class EDA_BoardDesignSettings
{
public:
int m_CopperLayerCount; // Number of copper layers for this design
int m_ViaDrill; // via drill (for the entire board)
int m_ViaDrillCustomValue; // via drill for vias which must have a defined drill value
int m_MicroViaDrill; // micro via drill (for the entire board)
int m_CurrentViaSize; // Current via size
int m_CurrentMicroViaSize; // Current micro via size
bool m_MicroViasAllowed; // true to allow micro vias
int m_ViaSizeHistory[HISTORY_NUMBER]; // Last HISTORY_NUMBER used via sizes
int m_CurrentViaType; // via type (VIA_BLIND_BURIED, VIA_TROUGHT VIA_MICROVIA)
int m_CurrentTrackWidth; // current track width
bool m_UseConnectedTrackWidth; // if true, when creating a new track starting on an existing track, use this track width
int m_TrackWidthHistory[HISTORY_NUMBER]; // Last HISTORY_NUMBER used track widths
int m_DrawSegmentWidth; // current graphic line width (not EDGE layer)
int m_EdgeSegmentWidth; // current graphic line width (EDGE layer only)
int m_PcbTextWidth; // current Pcb (not module) Text width
wxSize m_PcbTextSize; // current Pcb (not module) Text size
int m_TrackClearence; // track to track and track to pads clearance
int m_ZoneClearence; // zone to track and zone to pads clearance
int m_MaskMargin; // Solder mask margin
// Color options for screen display of the Printed Board:
int m_PcbGridColor; // Grid color
int m_LayerColor[32]; // Layer colors (tracks and graphic items)
int m_ViaColor[4]; // Via color (depending on is type)
int m_ModuleTextCMPColor; // Text module color for modules on the COMPONENT layer
int m_ModuleTextCUColor; // Text module color for modules on the COPPER layer
int m_ModuleTextNOVColor; // Text module color for "invisible" texts (must be BLACK if really not displayed)
int m_AnchorColor; // Anchor color for modules and texts
int m_PadCUColor; // Pad color for the COPPER side of the pad
int m_PadCMPColor; // Pad color for the COMPONENT side of the pad
// Pad color for the pads of both sides is m_PadCUColor OR m_PadCMPColor (in terms of colors)
int m_RatsnestColor; // Ratsnest color
public:
EDA_BoardDesignSettings();
/**
* Function GetVisibleLayers
* returns a bit-map of all the layers that are visible.
* @return int - the visible layers in bit-mapped form.
*/
int GetVisibleLayers() const;
};
// Values for m_DisplayViaMode member:
enum DisplayViaMode {
VIA_HOLE_NOT_SHOW = 0,
VIA_SPECIAL_HOLE_SHOW,
ALL_VIA_HOLE_SHOW,
OPT_VIA_HOLE_END
};
/* Handle info to display a board */
class PCB_SCREEN : public BASE_SCREEN
{
public:
int m_Active_Layer; /* ref couche active */
int m_Route_Layer_TOP; /* ref couches actives */
int m_Route_Layer_BOTTOM; /* pour placement vias et routage 2 couches */
public:
PCB_SCREEN( int idscreen );
~PCB_SCREEN();
PCB_SCREEN* Next() { return (PCB_SCREEN*) Pnext; }
void Init();
void SetNextZoom();
void SetPreviousZoom();
void SetLastZoom();
/**
* Function GetCurItem
* returns the currently selected BOARD_ITEM, overriding BASE_SCREEN::GetCurItem().
* @return BOARD_ITEM* - the one selected, or NULL.
*/
BOARD_ITEM* GetCurItem() const { return (BOARD_ITEM*) BASE_SCREEN::GetCurItem(); }
/**
* Function SetCurItem
* sets the currently selected object, m_CurrentItem.
* @param aItem Any object derived from BOARD_ITEM
*/
void SetCurItem( BOARD_ITEM* aItem ) { BASE_SCREEN::SetCurItem( aItem ); }
/* Return true if a microvia can be put on board
* A microvia ia a small via restricted to 2 near neighbour layers
* because its is hole is made by laser which can penetrate only one layer
* It is mainly used to connect BGA to the first inner layer
* And it is allowed from an external layer to the first inner layer
*/
bool IsMicroViaAcceptable( void );
};
/**********************************/
/* Module (Footprint) description */
/**********************************/
#include "class_pad.h" // class for pads
#include "class_edge_mod.h" // Class for footprint graphic elements
#include "class_text_mod.h" // Class for footprint fields
#include "class_module.h" // Class for the footprint
#include "class_equipot.h"
/***********************************/
/* Description des elements du PCB */
/***********************************/
#include "class_drawsegment.h"
#include "class_pcb_text.h"
#include "class_cotation.h"
#include "class_mire.h"
#include "class_track.h"
#include "class_marker.h"
#include "class_zone.h"
class DISPLAY_OPTIONS
{
public:
bool DisplayPadFill;
bool DisplayPadNum;
bool DisplayPadNoConn;
bool DisplayPadIsol;
int DisplayModEdge;
int DisplayModText;
bool DisplayPcbTrackFill; /* FALSE = sketch , TRUE = filled */
bool DisplayTrackIsol;
int m_DisplayViaMode; /* 0 do not show via hole,
* 1 show via hole for non default value
* 2 show all via hole */
bool DisplayPolarCood;
bool DisplayZones;
bool Show_Modules_Cmp;
bool Show_Modules_Cu;
int DisplayDrawItems;
bool ContrastModeDisplay;
public:
DISPLAY_OPTIONS();
};
#endif /* PCBSTRUCT_H */
Reference in New Issue View Git Blame Copy Permalink