kicad/include/advanced_config.h

597 lines
17 KiB
C++

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 2019-2023 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#ifndef ADVANCED_CFG__H
#define ADVANCED_CFG__H
#include <kicommon.h>
class wxConfigBase;
/**
* @defgroup advanced_config Advanced Configuration Variables
*
* Class containing "advanced" configuration options.
*
* Options set here are for developer or advanced users only. If a general user
* needs to set one of these for normal KiCad use, either:
* * They are working around some bug that should be fixed, or
* * The parameter they are setting is of general interest and should be in the
* main application config, with UI provided.
*
* Options in this class are, in general, preferable to #defines, as they
* allow more flexible configuration by developers, and don't hide code from
* the compiler on other configurations, which can result in broken builds.
*
* Never use advanced configs in an untestable way. If a function depends on
* advanced config such that you cannot test it without changing the config,
* "lift" the config to a higher level and make pass it as parameter of the code
* under test. The tests can pass their own values as needed.
*
* This also applies to code that does not depend on "common" - it cannot
* use this class, so you must pass configuration in as proper parameters.
*
* Sometimes you can just use values directly, and sometimes helper functions
* might be provided to allow extra logic (for example when a advanced config
* applies only on certain platforms).
*
* For more information on what config keys set these parameters in the
* config files, and why you might want to set them, see #AC_KEYS
*
*/
class KICOMMON_API ADVANCED_CFG
{
public:
/**
* Get the singleton instance's config, which is shared by all consumers.
*
* This configuration is read-only - to set options, users should add the parameters to
* their config files at ~/.config/kicad/advanced, or the platform equivalent.
*/
static const ADVANCED_CFG& GetCfg();
///@{
/// \ingroup advanced_config
/**
* Distance from an arc end point and the estimated end point, when rotating from the
* start point to the end point.
*
* Setting name: "DrawArcAccuracy"
* Valid values: 0 to 100000
* Default value: 10
*/
double m_DrawArcAccuracy;
/**
* When drawing an arc, the angle ( center - start ) - ( start - end ) can be limited to
* avoid extremely high radii.
*
* Setting name: "DrawArcCenterStartEndMaxAngle"
* Valid values: 0 to 100000
* Default value: 50
*/
double m_DrawArcCenterMaxAngle;
/**
* Maximum angle between the tangent line of an arc track and a connected straight track
* in order to commence arc dragging. Units are degrees.
*
* Setting name: "MaxTangentTrackAngleDeviation"
* Valid values: 0 to 90
* Default value: 1
*/
double m_MaxTangentAngleDeviation;
/**
* Maximum track length to keep after doing an arc track resizing operation. Units are mm.
*
* Setting name: "MaxTrackLengthToKeep"
* Valid values: 0 to 1
* Default value: 0.0005
*/
double m_MaxTrackLengthToKeep;
/**
* When filling zones, we add an extra amount of clearance to each zone to ensure that
* rounding errors do not overrun minimum clearance distances.
*
* This is the extra clearance in mm.
*
* Setting name: "ExtraFillMargin"
* Valid values: 0 to 1
* Default value: 0.0005
*/
double m_ExtraClearance;
/**
* Epsilon for DRC tests.
*
* @note Fo zone tests this is essentially additive with #m_ExtraClearance. Units are mm.
*
* Setting name: "DRCEpsilon"
* Valid values: 0 to 1
* Default value: 0.0005
*/
double m_DRCEpsilon;
/**
* Sliver width tolerance for DRC.
*
* Units are mm.
*
* Setting name: "DRCSliverWidthTolerance"
* Valid values: 0.01 to 0.25
* Default value: 0.08
*/
double m_SliverWidthTolerance;
/**
* Sliver length tolerance for DRC.
*
* Units are mm.
*
* Setting name: "DRCSliverMinimumLength"
* Valid values: 1e-9 to 10
* Default value: 0.0008
*/
double m_SliverMinimumLength;
/**
* Sliver angle to tolerance for DRC.
*
* Units are mm.
*
* Setting name: "DRCSliverAngleTolerance"
* Valid values: 1 to 90
* Default value: 20
*/
double m_SliverAngleTolerance;
/**
* Dimension used to calculate the actual hole size from the finish hole size.
*
* @note IPC-6012 says 0.015-0.018mm; Cadence says at least 0.020mm for a Class 2 board and
* at least 0.025mm for Class 3. Units are mm.
*
* Setting name: "HoleWallPlatingThickness"
* Valid values: 1 to 90
* Default value: 0.02
*/
double m_HoleWallThickness;
/**
* Configure the coroutine stack size in bytes.
*
* @note This should be allocated in multiples of the system page size (n*4096 is generally
* safe)
*
* Setting name: "CoroutineStackSize"
* Valid values: 32 * 4096 to 4096 * 4096
* Default value: 256 * 4096
*/
int m_CoroutineStackSize;
/**
* The update interval the wxWidgets sends wxUpdateUIEvents to windows.
*
* Setting this to -1 will disable all automatic UI events. Any other
* value is the number of milliseconds between events.
*
* @see https://docs.wxwidgets.org/3.0/classwx_update_u_i_event.html#a24daac56f682b866baac592e761ccede.
*
* Setting name: "UpdateUIEventInterval"
* Valid values: -1 to 100000
* Default value: 0
*/
int m_UpdateUIEventInterval;
/**
* Show PNS router debug graphics while routing
*
* Setting name: "ShowRouterDebugGraphics"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_ShowRouterDebugGraphics;
/**
* Enable PNS router to dump state information for debug purpose (press `0` while routing)
*
* Setting name: "EnableRouterDump"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_EnableRouterDump;
/**
* Slide the zoom steps over for debugging things "up close".
*
* Setting name: "EnableRouterDump"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_HyperZoom;
/**
* Save files in compact display mode
*
* When set to true, this will wrap polygon point sets at 4 points per line rather
* than a single point per line. Single point per line helps with version control systems.
*
* Setting name: "CompactSave"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_CompactSave;
/**
* Enable drawing the triangulation outlines with a visible color.
*
* @note This only affects the OpenGL GAL.
*
* Setting name: "StrokeTriangulation"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_DrawTriangulationOutlines;
/**
* When true, adds zone-display-modes for stroking the zone fracture boundaries and the zone
* triangulation.
*
* Setting name: "ExtraZoneDisplayModes"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_ExtraZoneDisplayModes;
/**
* Absolute minimum pen width for plotting.
*
* @note Some formats (PDF, for example) don't like ultra-thin lines. PDF seems happy
* enough with 0.0212mm which equates to 1px @ 1200dpi. Units are mm.
*
* Setting name: "MinPlotPenWidth"
* Valid values: 0 to 1
* Default value: 0.0212
*/
double m_MinPlotPenWidth;
/**
* A mode that dumps the various stages of a F_Cu fill into In1_Cu through In9_Cu.
*
* Setting name: "DebugZoneFiller"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_DebugZoneFiller;
/**
* A mode that writes PDFs without compression.
*
* Setting name: "DebugPDFWriter"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_DebugPDFWriter;
/**
* The diameter of the drill marks on print and plot outputs (in mm) when the "Drill marks"
* option is set to "Small mark".
*
* Setting name: "SmallDrillMarkSize"
* Valid values: 0 to 3
* Default value: 0.35
*/
double m_SmallDrillMarkSize;
/**
* Enable the hotkeys dumper feature for generating documentation.
*
* Setting name: "HotkeysDumper"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_HotkeysDumper;
/**
* Draw GAL bounding boxes in painters.
*
* Setting name: "DrawBoundingBoxes"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_DrawBoundingBoxes;
/**
* Enable exporting board editor netlist to a file for troubleshooting purposes.
*
* Setting name: "ShowPcbnewExportNetlist"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_ShowPcbnewExportNetlist;
/**
* Skip reading/writing 3D model file caches.
*
* This does not prevent the models from being cached in memory meaning reopening the 3D
* viewer in the same project session will not reload model data from disk again.
*
* Setting name: "Skip3DModelFileCache"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_Skip3DModelFileCache;
/**
* Skip reading/writing 3D model memory caches.
&
* This ensures 3D models are always reloaded from disk even if we previously opened the 3D
* viewer.
*
* Setting name: "Skip3DModelMemoryCache"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_Skip3DModelMemoryCache;
/**
* Hide the build version from the KiCad manager frame title.
*
* Useful for making screenshots/videos of KiCad without pinning to a specific version.
*
* Setting name: "HideVersionFromTitle"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_HideVersionFromTitle;
/**
* Enable showing schematic repair output.
*
* Setting name: "ShowRepairSchematic"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_ShowRepairSchematic;
/**
* Shows debugging event counters in various places.
*
* Setting name: "ShowEventCounters"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_ShowEventCounters;
/**
* Allow manual scaling of canvas.
*
* Setting name: "AllowManualCanvasScale"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_AllowManualCanvasScale;
/**
* Set the bevel height of layer items in 3D viewer when ray tracing.
*
* Controls the start of curvature normal on the edge. The value is in micrometer. Good
* values should be around or less than the copper thickness.
*
* Setting name: "V3DRT_BevelHeight_um"
* Valid values: 0 to std::numeric_limits<int>::max()
* Default value: 30
*/
int m_3DRT_BevelHeight_um;
/**
* 3D-Viewer raytracing factor applied to Extent.z of the item layer.
*
* This is used for calculating the bevel's height.
*
* Setting name: "V3DRT_BevelHeight_um"
* Valid values: 0 to 100
* Default value: 1/16
*/
double m_3DRT_BevelExtentFactor;
/**
* Use Clipper2 instead of Clipper1.
*
* Setting name: "UseClipper2"
* Valid values: 0 or 1
* Default value: 1
*/
bool m_UseClipper2;
/**
* Use the 3DConnexion Driver.
*
* Setting name: "3DConnexionDriver"
* Valid values: 0 or 1
* Default value: 1
*/
bool m_Use3DConnexionDriver;
/**
* Use the new incremental netlister for realtime jobs.
*
* Setting name: "IncrementalConnectivity"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_IncrementalConnectivity;
/**
* The number of milliseconds to wait in a click before showing a disambiguation menu.
*
* Setting name: "DisambiguationTime"
* Valid values: 50 or 10000
* Default value: 300
*/
int m_DisambiguationMenuDelay;
/**
* Enable support for generators.
*
* Setting name: "EnableGenerators"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_EnableGenerators;
/**
* Enable git integration.
*
* Setting name: "EnableGit"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_EnableGit;
/**
* Enable option to load lib files with text editor.
*
* Setting name: "EnableLibWithText"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_EnableLibWithText;
/**
* Enable Eeschema printing using Cairo.
*
* Setting name: "EnableEeschemaPrintCairo"
* Valid values: 0 or 1
* Default value: 0
*/
bool m_EnableEeschemaPrintCairo;
/**
* Board object selection visibility limit.
*
* This ratio is used to determine if an object in a selected object layer stack is
* visible. All alpha ratios less or equal to this value are considered invisible
* to the user and will be pruned from the list of selections. Valid values are
* between 0 and less than 1. A value of 1 disables this feature. Reasonable values
* are between 0.01 and 0.03 depending on the layer colors.
*
* Setting name: "PcbSelectionVisibilityRatio"
* Valid values: 0.0 to 1.0
* Default value: 1
*/
double m_PcbSelectionVisibilityRatio;
/**
* Length of the minimum segment for the outline decomposer. This is in IU, so
* it is nm in pcbnew and 100nm in eeschema.
*
* Setting name: "MinimumSegmentLength"
* Valid values: 10 to 1000
* Default value: 50
*/
int m_MinimumSegmentLength;
/**
* OCE (STEP/IGES) 3D Plugin Tesselation Linear Deflection
*
* Linear deflection determines the maximum distance between the original geometry
* and the tessellated representation, measured in millimeters (mm), influencing
* the precision of flat surfaces.
*
* Setting name: "OcePluginLinearDeflection"
* Valid values: 0.01 to 1.0
* Default value: 0.14
*/
double m_OcePluginLinearDeflection;
/**
* OCE (STEP/IGES) 3D Plugin Tesselation Angular Deflection
*
* Angular deflection specifies the maximum deviation angle (in degrees) between
* the normals of adjacent facets in the tessellated model. Lower values result
* in smoother curved surfaces by creating more facets to closely approximate
* the curve.
*
* Setting name: "OcePluginAngularDeflection"
* Valid values: 0.1 to 180
* Default value: 30
*/
double m_OcePluginAngularDeflection;
/**
* The number of internal units that will be allowed to deflect from the base
* segment when creating a new segment.
*
* Setting name: "TriangulateSimplificationLevel"
* Valid values: 0 to 1000
* Default value: 50
*/
int m_TriangulateSimplificationLevel;
/**
* The minimum area of a polygon that can be left over after triangulation and
* still consider the triangulation successful. This is internal units, so
* it is square nm in pcbnew.
*
* Setting name: "TriangulateMinimumArea"
* Valid values: 0 to 100000
* Default value: 1000
*/
int m_TriangulateMinimumArea;
/**
* Enable the use of a cache-friendlier and therefore faster version of the
* polygon fracture algorithm.
*
* Setting name: "EnableCacheFriendlyFracture"
* Valid values: 0 or 1
* Default value: 1
*/
bool m_EnableCacheFriendlyFracture;
///@}
private:
ADVANCED_CFG();
/**
* Load the config from the normal config file
*/
void loadFromConfigFile();
/*
* Load config from the given config base
*/
void loadSettings( wxConfigBase& aCfg );
};
#endif // ADVANCED_CFG__H