* break long commands into multiple lines for readability
* fix the format of closures
We generally write `{|| ...}` instead of `{ || ...}`.
* remove the `$"--opt=(val)"` structure when possible
`starship` does not require to use `--opt=val` and so we do not
need to do that with Nushell :)
the only place where this is required is with `--status` because
`$env.LAST_EXIT_CODE` can be negative and `starship` does not
appear to *like* values of the form `-2`...
so i left this line as it was.
on the other hand, `$env.CMD_DURATION_MS` and `(term size).columns`
should be fine 😌
* simplify the `config` mutation with new `?` syntax
This is a new very handy feature of Nushell which gives a much
simpler command combined with `default` and `merge`.
* put all `let-env`s inside an `export-env` with `load-env`
This commit has two reasons of existing:
- i think it makes it a bit easier to read with less `let-env`s
- it transforms the *script* into both a valid module and a valid
overlay
* bump the version to `0.78` in to docs
* add a note about the init file being also a module to all docs
* tweak the documentation
* update the Nushell part of the install script
* format the vuepress config file
as previous commit 117580136d3da5e00a4ccb7ada508c8510a2e50e was
not successful, let's try to make the CI happy manually 😌
* remove code quotes in the `config_cmd` of Nushell
* format the style in the Nushell `warning` section
Handles starship.install (MSI installer) and starship.portable and makes starship an
empty meta-package that only depends on starship.install. MSI/installer packages
seem to be preferred over zip-based installers on chocolatey. Proper virtual packages
that allow choosing either a portable or install variant aren't implemented in chocolatey yet.
Improve Nushell installation instruction
Consistently use `save -f` rather than `save`; the latter fails if the
file already exists
Signed-off-by: Michel Alexandre Salim <michel@michel-slm.name>
* chore(install): fix typo in help message
* chore(install): drop trailing `s` for consistency
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
By default, unzip will attempt to query the user when files to be
installed already exist. Unfortunately, if the install script is run
with `sh -s`, unzip will read the remaining portion of the script as
input, resulting in a mess on the terminal.
This commit changes the unzip behavior to clobber existing files: this
already happens for platforms using tar, so it's not hugely breaking
(and I could find no evidence that we believe this is more likely to
cause issues on Windows)
The installation script warns about `BIN_DIR` not being found in `$PATH`
when the users pass a trailing forward slash.
This has been discussed in #1310, #1341, and #3486.
Fixes#3493
* feat: add support for cmd
* add preprompt and precmd support
* add keymap support
* add info about minimum Clink version
* simplify escaping
* add handling for cmd custom commands
* add support for transient_prompt and transient_rprompt
* Revert 914057952508e81e20086fcb707ba2a0be85fdd3
This reverts commit "add support for transient_prompt and transient_rprompt"
* Apply suggestions from code review
* disable cmd shell custom commands
* any shell other than cmd can be used
* better error and correct script location
* move shell check in `map_no_escaping`
* Refactored the usage function to use printf
Using printf to print the usage function instead of a here doc handles
the formatting for us so it will be consistent across a wide variety of
terminal emulators. Here docs also tend to mess up auto-formatters so
removing it has that added benefit.
* Made the install instructions their own function
The function loops through simular install instructions so this way we
won't have to repeat ourselves every time we add a new supported shell.
* Set default config_file location
The default location is based on the name of the shell. It is overwritten when needed.
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
* feat: add support for xonsh
* xonsh: add STARSHIP_SESSION_KEY
* xonsh: implement STARSHIP_SESSION_KEY in xonsh
* docs: mention tcsh, elvish, and nu in more places
* xonsh: change STARSHIP_SESSION_KEY implementation
See https://github.com/starship/starship/pull/2807#discussion_r667064149
* xonsh: fix jobs implementation
* xonsh: do not silently discard stderr from starship
* feat: add support for tcsh
* add tcsh to install.sh install message
* list tcsh in bug_report.rs and main.rs
* quote starship path
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
* fix job count
* add tcsh support to shell module
* fix STARSHIP_START_TIME undefined error
* preserve existing user precmd and postcmd, remove jobs support
* remove unnecessary parentheses
* minor script improvement
* removes parens from install script message
* Update docs/config/README.md
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
* fix(Tcsh): remove unecessary quotes
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
- update shebang to support posix-compliant shells (like dash)
- replace all usages of echo with printf (to normalise)
- command variable to fetch_cmd as it overloads a posix
- rename complete function to completed as it overloads
the bash builtin for completion
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
* feat: add support for tcsh
* add tcsh to install.sh install message
* list tcsh in bug_report.rs and main.rs
* quote starship path
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
* fix job count
* add tcsh support to shell module
* fix STARSHIP_START_TIME undefined error
* preserve existing user precmd and postcmd, remove jobs support
* remove unnecessary parentheses
* minor script improvement
* removes parens from install script message
* Update docs/config/README.md
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
We have had a few issues where users haave run the install script and
have ended up with a non-functioning version of starship because their
system doesn't have a required lib that we link against. To avoid these
problems it seems the easiest solution is to default to using the
statically compiled musl binaries. If a user knows that they are doing
they can use the non-statically compiled binaries by supplying the `-p`
argument to the installer. Note this is what other rust based tools such
as ripgrep do.
Adds several cross-platform utility functions to the install.sh script and
rewrites core functionality so that it might work on Windows. Among these are:
- Correct platform extensions to match the output of `detect_platform`
- Check to make sure installation directory actually exists
- If sudo is not available, print a message asking the user to manually
escalate
- Unpack zip files (used for Windows builds) without using pipes, since zip
files cannot be read through pipes
After these changes, install.sh works on a testing copy of Git Bash on Windows,
though it still has known issues (e.g. if the `unzip` program is not installed,
it will crash).
David Knaack
Antoine Stevan
Zhizhen He
Michel Alexandre Salim
cassis163
Thomas O'Donnell
David Cantrell
César Román
Kevin Song
Kevin Song
Rashil Gandhi
James Conroy
Jeremy Schlatter
Vivek Malneedi
Deavon M. McCaffery
sokai
Or Bin
Dario Vladović
Kevin Song
Diego Jornada
AppleTheGolden
BuggStream
Matan Kushner