In the $script variable definition there appears to be a typo of "<<SCRIPT" when it should be "<<-SCRIPT". I ran into this issue while editing the Vagrant file on a Fedora variant with ruby 2.3.3p222 (2016-11-21 revision 56859) [x86_64-linux].
Creating a usable box from scratch
- api only accepts puts no push when uploading the file
- the final step of actually releasing the version was missing from ruby example
Prior to this commit, the virtualbox synced folder option
`SharedFoldersEnableSymlinksCreate` was always enabled. This commit
introduces a config option and an environment variable which allows
users to configure the option globally or per synced_folder in their
Vagrantfile.
When using Turbolinks to navigate between docs pages, the document ready event never fired and all language examples were shown. This should fix the issue without needed a refresh/example menu click.
- Keep the Programming Errors with corresponding Exception class and
en.yml message template. Fix the alphabetical order in errors.rb by
the way.
- Fix English wording in the documentation and en.yml messages
- Use StandardError for unknown error rescuing.
Thanks @chrisroberts!
Vagrant will verify that the current Ansible version does support the
requested compatibility mode (only applicable if not "auto", of course).
As mentioned in the documentation, there is no sanity checks between
`version` option and `compatibility_mode` option.
With this change, the host-based provisioner is also improved to
execute only once the "ansible" command (and store the gathered
information for multiple usages like version requirement and
compatibility checks). On the other hand, the guest-based provisioner
can still potentially execute "ansible" twice (once in the
AnsibleInstalled cap, and via "gather_ansible_version" function via
Base::set_compatibility_mode).
Fixing a typo made in 073898046542323eb11c2e129f37fa558ae201e1,
after getting the confirmation that all the Vagrant docs will continue
to use full path for internal links (for the moment).
[ci skip]
Before this change, only the ansible_local provisioner supported this
option (for ansible version requirement, and pip installation). Now, the
ansible host-based provisioner can also require a exact ansible version.
Resolve#8914
Note: this has been added as part of #6570 resolution, since the
introduction of the `compatibility_mode` auto-detection made both
provisioners made capable to detect ansible version.
Pending: optimize the code to avoid duplicated executions of "ansible
--version" command.
With this change, it is now possible to get rid of many deprecation
messages successively introduced in Ansible 1.9, and 2.0. More
interesting, the generated inventory will contain the recommended
variable names (e.g. `ansible_host` instead of `ansible_ssh_host`)
when the compatibility mode is set to '2.0'.
Details:
- Add `compatibility_mode` option to control the Ansible parameters
format to be used. The value corresponds to the minimal version
supported. For the moment, possible values are '1.8' (corresponding to
Vagrant's former behaviour) or '2.0'.
Note that a dynamic inventory generated in compatibility mode '2.0'
is not supported by Ansible 1.x. On the other hand, Ansible 2.x so far
supports inventory format generated by the compatibility mode '1.8'.
- Add compatibility mode auto-detection, based on the available Ansible
version. This is the default behaviour in order to bring a maximum of
user friendliness. The drawback of this approach is to let potential
compatibility breaking risks, for `ansible` provisioner setups that
already integrate Ansible 2.x **AND** rely on the existence of
the generated `_ssh` variable names. Thanks to the vagrant warnings
(and its release notes), I argue that it is worth to offer
auto-detection by default, which offers a sweet transition to most
users.
- Add `become`, `become_user` and `ask_become_pass` options and their
backwards compatible aliases. The legacy options are now deprecated.
Note that we intentionally didn't provide a '1.9' compatibility mode,
as it would add extra-complexity for practically no added-value.
To my knowledge, the Ansible 2.x series haven't introduced yet any major
changes or deprecations that would motivate to introduce a higher
version compatibility mode (to be confirmed/verified).
Resolve GH-6570
Still Pending:
- Optimization: Reduce the number of `ansible` command executions.
Currently two exec calls will be performed when the compatibility
mode auto-detection is enabled (i.e. by default). We could make the
provisioner a little bit smarter to only execute `ansible` only once
in any situation (by combining "presence" and "version" checks).
- User-friendliness: Add better validator on `compatibility_mode`
option, and shows a warning or an error instead of the silent
fallback on the auto-detection modus.
- Test coverage: All the added behaviours are not fully covered yet.
This commit aligns how the file provisioner should work on all host
machines. It ensures that a `/.` is only applied if the user intended
to upload a folder to a destination under a different name. It ensures
that if uploading to a windows guest with a different destination folder
name, it does not nest the source folder under that name so that it
works the same as it does on linux platforms. It also updates the
behavior of the winrm upload communicator by allowing an array of paths
to be uploaded instead of a single file or folder to allow for this new
functionality for windows guests.
This commit introduces the salt_arg option that allows a user to pass
additional command line flags to the `salt` tool when provisioning with
a master setup.
It also adds additional config validation to ensure that both
`salt_args` and `salt_call_args` is an array.
Prior to this commit, there was no way to add additional ssh arguments
within a Vagrantfile for a given vagrant machine. This commit introduces
a new option extra_args that allows users to pass in a single argument
or an array of flags that will be added onto the ssh command.
Prior to this commit, if a user attempted to configure
`/etc/default/docker` through vagrant prior to installation, the package
manager would not override an existing configuration and installing
docker would then fail. This commit fixes this by introducing a
`post_install_provisioner` that allows users to define a provisioner
block that will run after docker has been installed, allowing users to
configure `/etc/default/docker` how they want.
This commit allows the user to configure two additional options that
were previously not configurable: Compression and DSAAuthentication.
Each config option is set as a boolean, and if left out of the config
will default to its previous behavior which is included and set to
"yes". If the user explicitly sets it to false, it will not be included
as an ssh option.
When using multiple builders, the post-processor could yield different results for the `{{timestamp}}` interpolation.
By using a variable instead, the version will be consistent across all builders.
https://github.com/hashicorp/packer/issues/4973
Enables proper setup of VMs started from within WSL rootfs paths. Updates
setup for Windows access when working within the WSL to auto-detect settings
instead of relying on user defined environment variables.
With the introduction of `pip_args` option, you can easily extend the
`:pip` installation mode behaviour. But some interesting/advanced usages
are still not possible because of the auto-generated parts ("ansible"
package, version selection, and the `--upgrade` flag).
By adding this "pip_args_only" install mode, it will be for instance
possible to:
- install unofficial releases, like release candidates published at
https://releases.ansible.com/
- install more pip packages (e.g. via a `requirements.txt` file), with
hash validation, etc.
Note that there is no config validation that requires `pip_args` option
to be defined when the :pip_args_only mode is selected. This would be
more elegant, and user friendly to raise a configuration error, but this
can wait. At least, running with an empty `pip_args` won't lead to any
command crash, since the rather dummy "pip install" shows an helper
notice and terminates with a zero (0) exit code.
This change is thought as a complement to the changes originally
proposed in pull request GH-8170.
Chris Roberts
Brian Cain
Alan
Brandon Authier
timolehto
Josh Soref
Brandon Moore
Jeff Escalante
Zachary Flower
Chris Roberts
Dan Alvizu
John Eismeier
Cladis
Clint Harrison
Ryan Walder
Justin Campbell
Phoenix09
Alvaro Miranda Aguilera
hrvoj3e
Gilles Cornu
bjorn
Ramon Fischer
Ramiro Morales
codybennett
David Manouchehri
Chris Roberts
magicrootZ
Patrick Coffey
Jonathan LaBroad
Jordan Danford
Stephen James
hvle
Artem Sidorenko
Seth Vargo
Ilia Liachin
Alvaro Miranda Aguilera
TrueGit
Óscar García Amor
Letla Fox
Armon Dadgar
Ryon Coleman
Aaron Kunz
Brian Knight
Katie Bayes
Matthew Hooker
vmelnik-ukraine
tonynguyen68
Liam Griffin
JKapitein
Seth Vargo
James Phillips
Dafydd Jones
Mitchell Hashimoto